Encore CS3 not burning to disc?

Hi all,
I am using CS3 Encore and up to now have been very successful when creating a Blu-Ray DVD.
Most of my footage has been around 1-11/2 hours long so I have always left it on Auto transcode and its been fine.
However, I have created a project at 1 hour 57 mins but now after waiting 7 hours each time for rendering, it pops out the disc and tells
me that there is a Encore CS3; Blu-Ray burning .... "Device Error", Code "3", Note: "AS-Storage Error= -97140.
I have also burned an image file which ends up as a 23.83 GB file, leaving just 1.17GB space on disc but will not burn?
I have reverted to burning a 1 1/2 disc and it does it fine. I am told by another that the file ends up as too larger a file to burn?
OK, as nobody seems to have solved this issue while searching the net, I was wondering if I could get some help with the transcode settings?
The transcode setting have been change by me many times from.... Min 1.5 Target 25 Max 30, Down to Min 1.5, Target 17, Max 20.
However, the final project before going to burn is still 23.83GB, and the same error: Encore CS3; Blu-Ray burning .... "Device Error", Code "3", Note: "AS-Storage Error= -97140 is showing after ejecting disc?
can anyone please help?
Thanks
Alan Grove

Hi Jeff, thanks for that I will give it a go.
Something I dont understand?
When I put project together it says in EN that the disc has 12gb used with
12Gb unused.
Yet when I build it tells me that the disc has used 23.83 GB and has 1.7Gb
free?
I wish I understood these bloody programmes he he.
I am used to just putting in a disc and being told immediately if it will
burn after 7 hours waiting?
Cheers
Alan

Similar Messages

My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpful

Try using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT

Can not burn a disc with I tunes

I can not burn a disc with I tunes any more , I updated the soft wear have use several new disc but get the same results(attempt to burn disc failed errorr #4280) I can burn disc using Microsoft Media player
Thanks

Have you tried a Cleaner CD yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

Encore CS3: Not closing DVD's

I had no issues with Encore 1 or 2, but ever since I've installed Encore CS3, my DVD's are still "open". This is confirmed by using Roxio 9's disc properties.
The reason this is important is, my DVD dubber will not dub open discs. I need them closed.
Is this a bug? Again, when I burned DVD's with Encore 2, they were fine. It wasn't until I upgraded to CS3 (just two days ago) when the 'open disc' issues started.

Most applications will dub open DVD's.
The problem I ran into is, I have a DVD duplicating tower and it just won't accept open DVD's. We've contacted the manufacturer and that's just the way the machine and drives work. The DVD's need to be closed.
Again, this is the only system that I've ever run into a problem (regarding open DVD's).
That's probably why Adobe isn't getting many complaints. Most people are using Nero or Roxio, which isn't giving them any issues when dubbing. Since my company is using a specialized dubbing system (which the average user wouldn't own), I seem to be one of the few who are noticing this issue.
and Minu, I'm confused about you saying that DVD-R's are being closed, because that's not the case with me and the Adobe tech even confirmed that Encore CS3 will not close DVD-R's.
p.s. I see jbowden posted while I was typing this. Yes, this is only an issue with certain dubbing systems that require closed DVD's.

Windows 7 does not recognize cd/dvd drive. Will not burn a disc

           In November 2013, I bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit. Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
           I made the mistake of installing itunes. I purchased music and made a playlist from my library and itunes. I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete. I tried a different brand of disc and had the same problem. The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.' I tried burning a disc using itunes burner but it didn't do anything.
           First, I removed every Apple application from my computer. Then I ran Microsoft CD/DVD trouble shooter. It didn't correct the problem and gave me the message "cannot locate CD/DVD burner". I ran trouble shooter in the Control Panel selected System Security's, Find and Fix. Then Selected Configure a Device . Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times. WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes. I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
          1. Used the troubleshooter in Control Panel.
         2. Ran CD/DVD Fixit trouble shooter.
          3. Manually fix corrupted registry.
         4. Update or reinstall driver.
          5.  Create a sub registry key.
I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014 thaat was before installing iTunes. No burn.   Checked driver and response was that 'Driver is working. No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'. How do I correct this? Help! What next?

Hi,
You were given some very good advice on your other post. I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application. I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
Do a fresh OS installation without the extra third party software and then install Imgburn. Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can not burn to disc

I am trying to burn a disc from my playlist. It h=asks for a blank cd and once this is in it comes up with checking media - then nothing happens???

I had the same problem with blank CDs after burning a playlist on iTunes 7.2.0.34.
I just downloaded and installed the latest version 7.2.0.35 from the Apple website (not through iTunes "check for updates" which said "7.2 was the latest") and now everything seems to be in order and the CD burning works.
Good Luck!

Slide show will not burn to disc

When burning to disc, I always get a transcoding error. It then reports an error "running low on system memory, save and proceed with caution." I have a vista machine with a duo core [email protected] ghz processor with 4gb of ram. My processor is running a max capacity and ram is only half used. Are there any settings I can change? or do I need a faster processor?
At this point I am not updated on what you got help with prior to posting this question.
But, the first things that I would ask,
A. what went into this Photoshop Elements 8 slideshow, if photos, what pixel dimensions and how many, if videos, what source, format, and duration, how long is this slideshow?
B. how did you import the slideshow into Premiere Elements 8 AND have you disabled Background Rendering and AutoAnalyzer features there.
C. what did you do to the Photoshop Elements slideshow once it was in Premiere Elements 8
We can unite the above requested information with your computer specifications in next discussions.
Premiere Elements questions are best posted in the Premiere Elements Forum here.
I will be watching for your responses.
ATR
I sent 6 slideshows created in photoshop elements to premiere elements (actually photoshop did it, I simply wanted to create a dvd to show these slide shows on a TV) Each slide show contains between 50 - 100 photos only. The original size of these images is 3000 dpi 3970pixels x2707pixels = 2.44mb each. I have not added any video or audio. I used one of the generic DVD menus and added 1 picture to the menu itself. I do have auto analyzer and other auto recognition programs turned off.

This is what I wound up doing: 1. Create each of your Photoshop Elements slideshows and output each using the Photoshop Elements Slide Show editor Output option "Save As File Movie .wmv" and File Size (profile) = DVD NTSC. Save each as .wmv to Organizer as well as your hard drive location of choice.
I then used windows movie maker to import and burn the files.
The conversion to .wmv files did not take long at all the largest file was 120mb.
I am still confused about batch resizing in photoshop elements. The directions previously given seem to be for photoshop. I could not find batch resize in the file or edit menus.
As far as my processor is concerned, I ran task manager to see what was running and what it was using. Whenever any program was "encoding", my processor ran at 90-100% all the time. No other programs were taxing the processor. My ram memory was unaffected- it always stayed at 50% capacity no matter what was being performed.
Thank you for your help, next time I will use albums to arrange my photos(instead of arranging them within the slideshow), I will resize them (once I figure out how to) and then send them to the slideshow.
Joe

HPE 180T does not recognize disc BD-RE BH20L, will not play a movie and will not burn a disc. DVD

My blu-ray will not recognize dvd-r, will not play any dvd or burn a disc. I ran all the diagnostic test and it says disc scratched, dirty or hardware problem, (Hardware Problem).
8/10/2009 firmware B57A
product#MXY00204HR, Driver Serial#B91D5P4022227. I have a dvd drive works fine.
I need to burn disc and realized I can only do it through optic drive. Being windows 7, I cant just burn the info. on my vista.
I have an old XP{ and it would be a shame to say I spent all this money on this machine and I cannot even burn a Disc!

Hi
To give you some precise answer it will be interesting to know which DVDs are not readable. Meaning of word 'some media' is to general and not helpful to understand the problem.
Satellite A30 is pretty old notebook model and it is possible that ODD functionality is not good anymore. You can try to clean the lens.

I Tunes 7.5 will not burn my discs (help!)

Hi I have I tunes 7.5 and I have for the first time ever via i tunes tried to burn a playlist to disc. The playlist has a few songs i bought on the i tunes store site and some others are just from my CD collection. I know there is enough space to copy them all on the disc but when i click on burn disc my computer makes a burning noice but nothing actually happens. I even have sonic burning software and have tried that and even this way it will not burn and i am wondering if it is becuase some of the i tune songs have padlock icons next to them. Does this mean i cannot put them on audio cd even though I have bought them - surely not that is unfair! Can anyone help as i would really like to make some CD's. I am also unsure as to whether my car/stereo will actually play these "mp4" files? Any help would be great guys?.....

I've got the same problem and can't find a fix...

Encore CS3: not enough space in disk now, but yesterday was OK!

Yet, another problem with Encore CS3: now it refuses to compile the DVD folder because the project exceeds the disk capacity (DVD DL).
I can´t understand this: yesterday it said that I was exceeding the disk capacity but it compiled the DVD files anyway (and there was really a lot of free space left in the disk, the VIDEO_TS folder was still under 8 Gb).
The only thing I´ve changed since then are the compression settings of one clip, reducing its quality so in theory I should have even more free space than yesterday.
I´ve been using this software for years and had never so many problems as with this project.

Go back to yesterday! (Ha, ha!) (I suppose that's half serious: revert to original and use your old settings. But I wonder if this error will now occur even then.)
I've had good luck with opening CS3's in CS4. I wonder if the PC to Mac change would be an issue. Just copy it all so you have something to go back to.
One user had something like this happen because one timeline exceeded the size per side. (That may have been BD.)
I wish I listed all the reasons for this the last time.
This may have also happened because the C: drive fills up with cache files. Try clearing the media cache?

Not burning 4GB disc to capacity

Any ideas why my discs stop when half full. A 4 GB disc will only burn about 1.2 GB material. It doesn't matter if I am using iDVD or Toast.
Tracy

+I should be able to follow your instructions right from the camera?+
No, I was addressing creating an iDVD project and then importing iMovie videos.
If you do not want to do any editing of your video footage, you can utilize iDVD's 'One Step' method to import directly from your camcorder to iDVD and have it automatically create a project and burn it to disk:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6757.html
Note that this does not save your iDVD project anywhere. It uses temporary files that you will not see.
If you are planning to edit your videos before burning to DVDs, or if you wish to save your projects, you will need to do this in two steps. First, importing into an iMovie project and editing the movie. Second, creating an iDVD project and importing/dragging your iMovie into it, doing the minor edits in iDVD--themes, title fonts, highlight colors, audio--and then creating a disk image file of the iDVD project. The disk image file can be used to burn DVD disks and saved for future burns.

CS3 Not loading from disc and download link not working

I had to wipe my MacBook Pro hard drive. I am now running Mavericks. I bought CS5 as an upgrade to CS3 so CS3 is required to be on my computer before it will let me load the update.I have tried loading CS3 from the disk (I have my original discs) but it won't let me. It gets stuck about 2/3rds of the way through install. I've tried 4 times and I'm fed up. Nothing should be this hard. There is nothing wrong with my CD drive either, as I have loaded four other pieces of software that come on CD.
I tried to download CS3 from the links that Adobe tells me to use but none of the links work. I have searched for links in general, I have done specific searches in Adobe. Everything I come across for the CS3 download gives me an error when I click on the Mac version to download (HTTP Error: 404/support/downloads/dlm/main.jsp). I have switched off the pop up blocker as well and tried more than one browser when downloading.
Does anyone have a work around? I've paid over $4,000 for this software, I don't have the money to buy the latest version and I need to get my work done. I'm done with the stupidity of just trying to load this and I shouldn't have to buy the latest version just to be able to load my update.
Please help if you can.
SIncere thanks
Hasmi

you don't need to install cs3 in order to install your cs5 upgrade. if you start the cs5 installation you will first be prompted for your cs5 serial number. the installer will then 'look' for cs3 on your computer and failing to find that will then prompt you for your cs3 serial number thereby establishing that you qualify to install the cs5 upgrade.
but if you want to install cs3:
You can download some of the older versions of Adobe software directly from the Adobe website. See the following links for details.
Accessible from these pages:
Download and installation help
Adobe Downloads - other downloads
Downloads available:
CS6 | CS5.5 | CS4 | CS3
Acrobat XI, X | 9,8
Premiere Elements 11, 10
Photoshop Elements 11, 10
or:
if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate with your serial number.
if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

Is it true that DVD Studio Pro will not burn HD discs?

I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
Thanks, Bob

You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

Encore CS3 will only burn in Admin

We use Encore CS3 in a domain. Our power user accounts can not burn a disc. Encore works fine when logged in as an admin on or off the domain. Is there a work around other than the shift>right click>admin acct fix?
Thanks

Is there any other way to do this? Just running as Administrator and thus opening up every computer that needs to use Encore to the threats involved does not seem like a good solution.

ITunes 12.0.1.26 on 2009 Mac Pro will not burn disc - error message medium write error

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Encore CS3 not burning to disc?

Similar Messages

Maybe you are looking for