Encore CS3 runtime error in Vista

Hi guys. Just installed CS3 Production and everything installed fine. Premiere and AE work but when I go boot up Encore I get the "C++ Runtime Error" message. I installed and re installed but still the same when I try and get into Encore. My system is a core 2 quad with 2 gig of ram and I am running Windows Vista Business.

Hi,
This is a bizarre one, everything is working fine then suddenly when I go to build a project I get a transcoding error, I search the forums and the suggestions are to reinstall which I do. Now I can't even launch Encore because I get a runtime error when the loading screen (generic encore dvd.exe error). The loading screen is stuck on loading opacity.AEX.
I've uninstalled and reinstalled 5 times now (both with deleting preferences and any registry entries and without) but with no luck. I've also tried uninstalling my AV/Firewalls but without success. I've searched the forums but can't find anything relating to it.
My system is;
Vista Ultimate (32-Bit)(Clean install)
P4 2.4 800Mhz FSB
2Gb RAM
2x 500Gb HD
Soundblaster Audigy
Nvidia Geforce 6800GT
My apologies if I've missed anything off.
Any suggestions?
Regards,
Doug

Similar Messages

Itunes causes Microsoft Visual C++ Runtime Error at Vista Startup

I installed Itunes version 8.1.1 and Quicktime on my Toshiba laptop with Vista. The installation went in correctly and Itunes found my music library.
However, when i rebooted the system, i get a Microsoft Visual C++ Runtime Error Library error message that states "This application has requested the runtime to terminate in an unusual way. The message persists and Vista will not boot up.
I have to do a system restore in safe mode to get Vista usuable again.
Has anyone seen this problem and can you help me find the culprit.

Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong.

Encore CS3 - Build error: "internal software error"

Hi All,
I'm fairly new to Encore but I've spend a lot of time figuring out how it works to the point that I think I've got it (menus, links, etc). Here's my problem:
I've exported a video with chapter points from Premiere CS3 into Encore (no problems). I've created all the menues and links to their respective chapters in Encore (no problems). I "checked" the video. Clean - no errors. I've "previewed" the vidoe in Encore - works perfectly. However, when I go to "build" the video, I get the following error in a pop-up window:
"PGC "Master" has an error at 00;43;38:01. internal software error: %0, line Master - PGC Info: name = Master, ref = Fpgc, time = 00;43;38:01"
"Master" is the name of the timeline that I have imported into Encore from Premiere.
In this case, the time (00;43;38:01) is the very last frame of video.
I've tried building both directly to a DVD burner and just creating a DVD image. Both give me the same error. I've also tried the process by 1) exporting from Premiere to Encore directly and also exporting from Premiere to an MPEG2 file saved on the desktop and then importing that into Encore. Same error, however, the time of the error is different (in one case, the time of the error was some time during the timeline, not the end or beginning).
Finally, a couple of weeks ago during my "learning process" I created a very simple timeline in Premiere with no chapters, exported to Encore and burned it. No problems with that.
Oh, I'm running a 4 year old IBM T41 laptop w/ 2GB of memory. Although not the fastest, I haven't run into any h/w or s/w related issues...yet. I just doesn't scream.
Can anyone provide help here? I'm STUMPED!!
Thanks,
Greg
Redwood City, CA

Some of us experience this pgc error (only in CS3) and have found no real solution. There are a variety of workarounds. I believe the most persistent version is the result of some unidentified combination of hardware and software.
I believe that there are 3 variations, and they may have different implications: timelines (your issue), motion menus, and slideshows.
Copies of projects and assets taken to a machine/user who does not experience the error work fine. Some users have done a ridiculous amount of testing (I'm one), and some have declared a solution (I am not one, and believe there are probably multiple causes). Since CS4 is out, I doubt we will ever see any further resolution, and, since the problem can not be reliably repeated in a new project with new assets, no "bug" was ever demonstrated.
The first rule is to use flawless workflow. (I don't find a link right off to Neil Wilkes' and Jeff Bellune's descriptions, but one example is never changing assets with Encore closed.) But I have instances in which I was perfect (ha, ha), and the error occurred.
In most instances, one or more workarounds can be used. If you used a muxed file, do it again with demuxed. If you used files that were in the same folder as the xmpses files (the files premiere creates to carry project/chapter info), delete the files other than the m2v and wav and reimport the asset as a timeline. (You will have to redo the chapter markers. It is best to delete the old file from the project, and have the newly imported file renamed. However, I have done it various ways successfully.) If you have long file names with spaces, shorten and remove the spaces.
You report one version of the error in which the time location is in the middle of the asset and not a frame or two from the end. This is not common for the persistent version of this error, and raises the question as to whether there is an actual problem in your asset.

Encore CS5 Runtime Error & crashes - HELP!

Hi everyone
I have installed Encore CS5 with Premiere Pro CS5 and used it to successfully burn a DVD. Today however, when I complete the New Project tab with the name & location/project settings and click OK, there is a pause of about 3 seconds and then a pop up box:
Runtime Error! Program: C:\...
This application has requested the Runtime to terminate it in am unusual way.
Please contact the application's support team for more information.
I have looked through the forums etc and the only possible solution was to turn off DLA, but i cannot see how to do this in Windows 7.
If anyone can help I would be most greatful, I don't see why I was able to burn a DVD without this problem last time.
Thanks!

I know this is an old thread, but I've been getting this recently and managed to find a solution.
Just for future reference this what I did, though not sure exactly which fixed it!..
I uninstalled Encore CS5
I also uninstalled some software related to the LG Bluray writer I had installed:
Cyberlink Power2Go
Cyberlink PowerStarter
Cyberlink LabelPrint
Cyberlink PowerProducer.
2 other programs I uninstalled: (less likely to cause a problem, but I was not using them)
Google Earth
ArcScan stitch-delux
Reboot
Use CCleaner to clean registry.
Disconnect internet
Disable Mcafee virus scan
Reinstall Encore CS5... then it all seemed to work ok, could create new projects etc.
My PC is running Windows 7 32bit. The LG writer is a BH10LS30

Authorware runtime error in vista

Hi
A user reported an error when running Authorware published
files on his machine.
He is running vista:
said it German " Authorware runtime does not work anymore"
Any reason why this is happening
thanks in advance
Jon

Is it a web application or a cbt?
I developed cbt in german and there are no problems. But use
the user directory for data stroring .. Else there are
security problems
See Buddy api infos ...
I tested aw applications on vista home and ultimate (32bit)
On 64 Bit
systems
there are some problems ...
"webacity" <[email protected]> schrieb im
Newsbeitrag
news:fi1q8k$6c3$[email protected]..
> Hi
> A user reported an error when running Authorware
published files on his
> machine.
> He is running vista:
> said it German " Authorware runtime does not work
anymore"
>
> Any reason why this is happening
>
> thanks in advance
>
> Jon
>
>
>

PS CS3 shutdown error in vista home premium

This just started and I can't figure out what changed.
I use vista home premium and photoshop cs3. The program works perfectly with no problems until I want to close the program. When I close the program, I get a windows error message saying the program has stopped working and windows is trying to correct the problem. Then a window comes up saying a problem has caused the program to stop working and windows will close the program and notify me if a solution is available.
Earlier this morning, I had 2 jpeg images open, changed one and tried to save it when an error message told me that a program error occurred and it could not be saved. When I saved it as a psd file, it saved with no problems at all. Could these two be related?
I re-installed the program without removing it first and in doing so, the messages on screen said it was repairing the shared components so I figured it had found the problem and was fixing it. No joy.
Has anyone else had this problem? Any solutions?
Any help would be most appreciated!
Thank you,
Randy

If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vidflow" <[email protected]> wrote in
message
news:fp5pi7$jv5$[email protected]..
>I have now tried to install DW CS3 8 more times.
>
> I have tried the following suggestions from listers and
the university
> help
> desk;
>
> 1. running cmd and typing regsvr32 jscript.dll to fully
establish admin
> privledge.
>
> 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
clean out old
> files
> that might interfere. MS cleaner was installed also as
per Adobe
> instructions.
>
> 3. Running msconfig to do an alternate shutdown of all
non MS program,
> virus
> checkers, etc.
>
> 4. I have used these separatedly and in combination. The
same failure to
> install DW CS3 occurs. DW does not get installed and
shared components
> also
> fail.
>
> This is maddening.
>
> Adrian
>
>
>
>
>

Encore CS3 - Out of Memory & C++ Runtime Error

I'm running Encore CS3 and I encounter several problems with a recent project that have made Encore practically useless.
When I try to preview the project, play a timeline or preview a menu I get this error. Out of Memory - Please Save and exit immediately to avoid data loss. I also get the c++ runtime error sometimes while trying the same actions.
I've also had Encore hang while trying to import .m2v files, although this appears to happen randomly. Clearing the media cache seams to fix it, sometimes.
All video was compressed with Cinemacraft Encoder 2.70.02.12 and all audio was normalized with Adobe Audition CS3.
I've read through the forms and tried deleting the media cache in the registry and re-installed Encore once. Nothing appears to work, I'm about ready to ditch Encore and go with another authoring program.
Please help.
My Specs
Windows XP X64 (Current Updates)
Dual Opteron 275
Tyan Thunder K8SE
4 GB ECC/Reg RAM (Corsair DDR400)
1x 74 GB Raptor for OS
1x 74 GB Raptor for Cache/Temp
2x 500 GB For project/storage
Quadro FX 3400
Sound Blaster Audigy
Pioneer 112D
Sony CRX320E

Why would XP64 be the problem if its worked fine for over 30 projects?
I also tried loading the project on one of our 32bit XP workstations with Encore CS3 and had all the same problems.
At this point the problem appears to be a bug with Encore, because after starting over from scratch I got the project to work fine.
It also appears that if you copy/paste anything it will corrupt your project somehow.
So, the bottom line its this, XP64 is not the problem.

Encore DVD CS3 Start Message "Runtime Error!"

I installed the Production Premium Suite CS3 with Encore DVD on Windows XP SP2. Dell Dimension 9200 Intel Core 2 DUO
at the startscreen of Encore DVD, i got the Runtime Error! Message.
Solution:
In my case, the "virtual Daemon Manager" also "Daemon Tool" was the problem.
I had mounted an iso file, after dismounting the file and close the tool resolved the problem.
Encore DVD is working now!
Juergen

As the first person in the World to have installation issues originally with Encore 1.5 upgrade (for which the well-known Joe Bowden had to get Adobe tech support to write a special bit of code to brute-force some Encore components to register), I was hoping I would not have any issues with their newest tools.
But I too had a problem with running Encore CS3 - the dreaded Runtime error which has been reported here.
I am running a Dual dual-core Xeon machine with 8GB RAM, Quadro FX 5500, in Windows XP Pro x64.
My colleague had got Encore running on his machine without any problems, so it was annoying to find I had this issue.
We have the same systems, with same software. The only difference is that I have some SCSI hard drives, a SCSI DLT drive, and SCSI CD-RW on top of the DVD writer.
After patching Encore CS3 and trying some techniques listed elsewhere on these forums to make the software work, in the end I had to go to my Control Panel, and disable the SCSI CD-RW drive.
As soon as this was done (a silly but not terrible workaround), Encore CS3 would happily load, and sees both my DVD writer and DLT drive just fine.
Just thought I'd let people know what worked for me....
Good luck!
Dom

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I just did an itunes update on my windows vista 64 and have been getting a runtime error eversense. Unstalled everything apple per microsoft forum discussions and solved the problem. When is apple going to update this problem for itunes?

I just recently did an itunes update on my Windows Vista 64 and have been getting a runtime C++ R0634 error ever since. Per microsoft forum discussions, I have removed everything apple on my computer to get this runtime error to stop. When I tried to remove and reinstall itunes, I get an error message during installation and to try again. Has just become a cycle. Apple, are you working on this?

I have exactly the same problem. Got update notice from Apple for iTunes and getting the C++ runtime error R0634 ever since. I have no clue how to fix it....meantime, I can't even pull up Outlook to check email. HELP!!
ksware

I am running Windows Vista 64 bit and i get a runtime error R6034. How can i fix this and get itunes to work?

I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

Internal Software error PGC for encore CS3 !!! solved !!!

Almost everybody here knows the next error:
PGC "timeline name" has an error at xx:xx:xx:xy internal software error : %0, line timeline name - PGCINFO: name= timeline name, ref=BPGC, time=xx:xx:xx:xy
Where the y in time stands for the length of the timeline minus 2 frames. The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
It kept me awake for weeks and after reading this forum several times and comparing encore CS3 with encore 2.0 filenames I found the solution.
This Error is a bug in encore witch has nothing to do with blank filename spots and sonic coding or codecs or planning your workflow with a pencil but pure with the combination Adobe Premiere Pro CS3 and Encore CS3.
This is what generates the problem:
In Adobe Premiere Pro CS3 you build project with video, sound and chapters. Then you export the project via the Media Encoder not Multplexed.
Premiere CS3 then creates the following files:
filename.M2V (video file mpg)
filename.AC3 (audio file ac3)
filename.M2V.XMPSES (an adobe file with preview info and chapter pointers)
filname.XMP (??)
It is the .M2V.XMPSES file witch creates the PGC error. If you use the MULTIPLEX DVD option then ADOBE will not create the .M2V.XMPSES file so there will not be an error. This trick mentioned by ADOBE and many others is just to go around the bug instead of solving it. Also with multiplex you have just one sound track. I use two sound tracks like 5.1 and a 2.0 track witch you can choose in a menu.
Some people say it is the blank spots. Also not true. They have probably just erased the blank spots of the M2V file and forgot the .M2V.XMPSES file.
When you just delete the .M2V.XMPSES file and then open the M2V and AC3 file in Encore as a new asset, make a timeline and menu's and the project will built and burn. Only if you delete this .M2V.XMPSES file Encore takes a longer time to import the M2V file and will be without the chapter points.
Almost everything else will work like menu with sound and even a movie background (use M2V files). Only the motion buttons in a menu still wont work unless you use a black background !?!. Haven't figured this out yet. Only solution for this is use Encore 2.0. In this older version also the motion buttons will work without error's (everything else also so why buy CS3??)
Here is what you must do create a DVD without errors:
-Create a project in Premiere Pro, even with chapters.
-Write down all chapter points (minutes:seconds:frames)
-Create two new unique maps in explorer for example D:DVD1 and D:DVD2
-Export in Premiere with Media Encoder without the Multiplex:DVD but with NON to the D:DVD1 map
-Copy from D:DVD1 only the M2V and AC3 files to D:DVD2
-Start up Encore DVD CS3 or 2.0
-Create a new unique project in Encore for example "DVD" and save this in the map D:DVD2\
-Then use Save-as (under file) and pinpoint to D:DVD2\dvd to be sure that all Encore's files are placed in this folder.
-Select M2V file and make new timeline.
-Make chapter points (you wrote down the points, did you?)
-Create menu's, even with sound (AC3) and movie background (M2V)
-Then render project if you have used a video for menu background
-Finally Built and burnnnnnn!!
-If you like to use motion buttons in a menu then use Encore 2.0
I have double checked my work flow and it really works. I have built a project and burned with success Then I deleted the timeline and the M2V file. Copied the .M2V.XMPSES file in the used folder. Re loaded the M2V file in encore (this time much faster! and with chapter points). Tried to built and burn and back was the error. Also this happened in in Encore 2.0!!
Hope that this will solve the PGC error once and for all !!!
Marcel W
system:
acer aspire AMD 64 3800+
2 GB
250 GB hard drive for system
750 GB hard drive for movie
software Adobe Encore 3.0.1.008, Premiere PRO 3.2.0, Photoshop CS3 10.0, All upgraded
NERO 7
No Internet

> Where the y in time stands for the length of the timeline minus 2 frames.
This can actually vary, and so far at least, I don't think we've seen a pattern as to type of pgc error based on how many frames from the end it reports.
> The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
Number of menus is not relevant; the iteration of the first letter is more related to subsequent occurrences of the error. In my current tests it did not always update; they may have been too similar.
> This is what generates the problem...
Well, the problem does not occur every time you do what you describe, any more than it occurs every time spaces are left in the file names. What you have is, as some other suggestions, a workaround. Thats not bad, and I wonder if you are onto something as to what is contributing to the problem.
So, on to the interesting part whether the xmpses file, or at least what Encore is doing with it, is contributing something. I took an old test project that throws the PGC error and did some experiments.
Background. I am a user who does get the pgc errors regularly, but not always. Creative Suite Production Premium, with PPro CS3 3.2.0 (374) and Encore 3.0.1.008. Pentium 4 2.8GHz 2G RAM, XP SP3, Multiple drives, Nvidia GEforce4 MX440 i.e. an older system. I have lots of stuff loaded and running, including virus protection and firewall, so there are any number of potential conflicts. But I get no crashes, and only one problem other than the pgc. (PPro and Encore monitor windows do this diagonal thing I suspect the display card, but the drivers are up to date. Maxing and then back to fit fixes it.)
If you want to attempt to replicate my studies, here is a link to my problem clip and the first Encore project I describe.
http://www.videoandcomputer.com/test/pgc_test.htm
This project involves a very short AVI export from PPro CS3 - just over 8 seconds - called pgcbad_clip1.avi. Just to answer any question, the source is dv camera capture, and the source and avi export I use are dv avi type 2. There were no effects added on the timeline.
Test 1: Create a project in Encore CS3. Use the sunset menu and delete all the buttons except "play all." Import the avi as a timeline. Set the timeline end action as "return to last menu" and set the button link to the timeline. Auto transcode. (Project settings are 8mbps max and a3c.) Check project shows okay; there is never a problem with that. Build to a DVD folder in a new folder. This project throws the pgc error.
Test 2: Now create a new Encore project in a new folder. Use the same process, except import as timeline the m2v and a3c files from the first run. (I.e. if the clip is pgcbad_clip1.avi, in the test1 project folders, there is a folder called pgcbad_clip1.avi that has 6 files.) Note that in the folder they are imported from is an xmpses file from the first project's encore transcode. The build again fails with the pgc error - same frame, etc, but I really think the frame number doesn't matter.
Test 3: Now create another new Encore project in a new folder. Use same process, but before importing the m2v and a3c as timeline, delete the xmpses file. Drumroll...... Build succeeds!
Go figure.
This is not the repeatable bug option weve been looking for, but based on a clip that always fails, it does demonstrate the odd event of deleting the xmpses file as a workaround. I wonder if that will give adobe something to work with.
Can anyone else get my clip to work/not work in a straight project?
Test 4: Just to answer the question since the avi file fails here, will the elemental option succeed? I exported elemental m2v and wav from PPro, used the same project process, and transcoded the wav. That build also works! I have seen this work both ways. I have had projects where the elemental failed, and an avi export worked. I do believe the elemental options work more consistently. But my project that I completed yesterday used all avi exports, animated buttons in the submenu, - no pgc error.

Runtime Error when launching Flash CS5 in Windows Vista 32bit

I installed Flash CS5 as a Trial and when i tried to launch it the error message appears on the screen:
Visual C++ Runtime Library
Runtime Error
This application has requested Runtime to terminated it in a unusual way.
Please contact the applications support team for more information.
I already tried to re-install Vista again and even tried to install flash in XP with the same unsucess result.

Hi Fmk,
It would be great if we have the installation log files. However you can try these.
1.Check whether your system meets the minimum requirements.
2. Install the current Windows Service Pack and other updates.
Try reinstalling.
Regards,
Bobby Johnson.

Encore CS3 runtime error in Vista

Similar Messages

Maybe you are looking for