Encore CS3 will only burn in Admin

We use Encore CS3 in a domain. Our power user accounts can not burn a disc. Encore works fine when logged in as an admin on or off the domain. Is there a work around other than the shift>right click>admin acct fix?
Thanks

Is there any other way to do this? Just running as Administrator and thus opening up every computer that needs to use Encore to the threats involved does not seem like a good solution.

Similar Messages

Encore CS5 will Only Burn One DVD At A Time

Hello All , I am having a problem that I didn't have with CS4 ,If I set CS5 to burn more than one DVD it shows a hardware error after the first one , If I set CS5 to burn one DVD it works every time I only burn at 8X .This is not a major problem because it doesn't take much longer to burn them one at a time
but it would be nice to know why .
Regards
Kevin

Thank's for your suggestion but I have always set CS4 to burn say 10 DVDs and just change the media when prompted (only 10 days ago) in CS5 this doesn't work only the first one will burn , I am sure there is nothing wrong with my hardware is works flawlessly with all other software.

IDVD will only burn to 16X discs and not 8X

I replaced my original superdrive with a pioneer DVR-100 because it can burn at 16X speed and dual layer. Now, iDVD will only burn to 16X discs. When I try to use 8X discs I get an error message. iDVD will begin to write, the disc will spin up twice, then the disc is ejected. The really annoying thing is that it makes those discs unusable.
Any ideas how to fix this.

What brand DVD-R?
I burn Verbatim DVD-R 16X at 4X all the time using a disk image and Toast (or Disk Utility). Try Verbatim. I use other brands too. In both of my "SuperDrives."
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Used to burn/read DVD-R and +R disks, lately will only burn +R.

My MBP used to burn/read DVD-R and +R disks. Lately will only burn +R.
The drive info:
HL-DT-ST DVDRW GS23N:
Firmware Revision:          SB03
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          0 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh
Others show the drive with -/+R -/+RW and DL (and more) and 2 MB buffer...
It makes no sense to me, need help. Thanks.
Leslie.

Hi Leslie,
Try an SMC Reset: http://support.apple.com/kb/HT3964

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

My superdrive will only burn audio cd's up to 8x for some reason...

I'm a college student, and I burn a lot of audio CDs to listen to in my car, and from what I recall, usually my burn speeds are around 24x. I tried burning a CD today and Toast only gave me options up to 8x burning speed. It actually burned the disc fine and everything, it's just that I can't figure out why all of the sudden my speed options have been reduced so low.

Are you using the same blank CDs that you recorded at 24x on? CD/DVD media are rated at certain speeds. If the CD/DVD media is only rated at 8X, it will not burn faster than that. Also, DVD and CD speeds are not the same thing. Was it a DVD that you were burning in Toast or a CD?

Burner will only burn DVD RW all of a sudden???

Sorry in advance about the long message
I have a satellite U205 S5002 which i got used 3 months ago
when i first got it i installed vista and everything was ok.( hardware-mat**bleep**a dvd-ram uj-842s ATA device)
then a week ago, i bought a new pack of dvd-r-until then i had used diff brands of dvd-r, dvd+r, dvd-rw, dvd+rw and they all worked. I dont know if it matters but the new pack was Imation and couldn't burn on any of them. Since then i have reinstalled vista twice, and haven't installed any programs besides win avi and nero.
When I last installed vista a couple of days ago, it let me burn 5 dvd-r and then nothing with win avi. Nero would only burn only dvd rw and everytime i tried a dvd-r it said it couldn't start disc at once.
Today i bought a new pack of the same dvd-rw it let me use last time and nero burned 1 and then kept telling me there was a track error. Win avi burned 1 and then when i tried a 2nd wouldn't do anything and then i installed convertX to dvd and it did the same as win avi.
It still burns cd-r's(they are the only one's i can burn with the vista built in software)
I just checked device manager and clicked on properties for the dvd drive, and in the details tab under value it says CD-ROM drive(dont know if that matters but i thought I'd mention it)
I have asked a couple of computer techs in my area and they had no idea what could be wrong
Thanks in advance for any help

hi Evan!
it's unusual that this started out of the blue ... did you install/uninstall/upgrade any hardware or software just before this started happening to you?
here's some standard resources for dealing with this sort of thing (but the sudden onset makes me wonder if something else is afoot):
http://docs.info.apple.com/article.html?artnum=93453
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
keep us posted.
love, b

Encore CS3 settings to burn DVD

Everytime a create a DVD and then put it into the DVD player it says error or wrong disk.
When I build the the DVD and the project asks me to select first play in the properties menu, I hit chapter 1. Then for the Title Button it asks me to set that button as well so I select specify link and then the project.
Is this wrong?
What should the settings be set to?
PLEEEEAAAASSSSEEEEEE HELP!!!!!!!!

If you do not have a printed manual (you can take the PDF to a quick-print shop and let them print it all out for you), I strongly recommend that you get a copy of Jeff Bellune's wonderful book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. Though it was written for an earlier version of Encore, 100% of that book will apply to your version. Jeff steps one though every phase of a DVD Project, form layout to Importing to Burning, and will also give you great little "secrets" as well. Were I just starting out with Encore, I would rush order that book from Amazon, or similar. You will never regret this.
Also, a screen-cap of your Flowchart would be very, very helpful. I think that all of believe that we know where the issue is, but that screen-cap will confirm it, and then we can tell you how to modify your Flowchart to make things that will work.
Good luck,
Hunt

Firefox 21 will only run in Admin. mode on Win 7 Pro. Also when I installed FF21 it came with a nasty virus.

Those are the details. FF 21 will not run on my system unless I choose Run as Administrator. So far none of the guesses posted by your tech support about this question in the past have worked.
I have removed the virus and removed FF and reinstalled. Same problem. I removed it again totally and reinstalled, same problem. I have installed it again under an Admin account and I still have the same problem. All of the earlier versions of FF worked fine in user mode.

I know that there are many posts on the internet dealing with FF having to be run under Admin. mode, but none of the guesses as to why have solved this problem. I also realize that most people running 21, judging from the lack of reaction, are running fine in user mode. But it would seem that the FF development team would be interested in this situation.
The trojan that came in on the FF install shut down Trusteer Rapport, a security software that my bank uses and recommends. The Trusteer support team worked with me to disable and remove the Trojan. That is what is called service.

Encore CS3 will not install

Hello
I've tried installing to XP32, XP64, Vista 32 & 64 and the new Windows7 32&64 with the same result each time... (encore failed to install)
The real kicker is that It installed for me before on this machine:
4G Ram; quad core 9000 series; no over clockin; Nvidia 250 (but tried others) I also replaced every thing... ram, cpu, motherboard, powersupply,
hard drives..... ect. one at a time then tried to re_install encore each time.
so basicly it has cost me an additional $2,000.00 + 20-30 hr. of time.
As you could imagine I am quite confused...........
Can any body HELP???????
Thanks

These are very general instructions for installation of most Adobe programs, and none might be specific to your exact situation.
1.) if it's a downloaded installation file, make sure to Extract that archived file with the FULL folder structure intact
2.) turn OFF all anti-virus, pop-up blocking and spy sweeping programs
3.) turn OFF all firewalls, etc.
4.) run as a full Administrator
5.) install to the C:\. The exact folder location can be changed from the default
Do not know if any of these will help, but do check that you have fulfilled each.
Good luck, and please let us know what worked, or did not, for you.
Hunt

ISync will only launch in Admin accounts in Snow Leopard

I use Sync Together from Mark Space. Since upgrading to Snow Leopard, the application will not launch and stops responding upon launch so I force quit. When I changed the account to an admin, this does not happen. The same thing happens with iSync. I am guessing that the root problem of Sync Together is that iSync is not launching.
Can anyone else launch iSync while logged in as a 'Standard' account?

There was a problem with the sync services. This article helped me solve this problem:
http://support.apple.com/kb/TS1627

DVD SP will only burn 1 file out of 3

Hello there --
I'm trying to use DVD SP to burn a dmg (then iso) file (because my burner died it seems), to be burnt on a pc later.
My problem is that the dmg file won't work (itself or converted to .iso).
I'm importing m2v/ac3 twin files, which play back fine in DVD SP itself (and elsewhere). It simulates ok too, but when I burn the file, it weighs 1,07 Gig, which is less than the total of the three clips I'm trying to burn, which amount to about 2 Gigs.
And in the VIDEO_TS folder, I can find the menu .VOB file, the first clip, but all other files are all 158 Kb empty files.
The first file (which seems to burn ok) is 16:9, the two others are 4:3.
Any suggestion, or things to look up or try?
Thanks!
DVD SP : 4.2.2
Mac Pro 2 x 2.66 Dual-Core Xeon / 14 Gig
10.6.8

I am not understanding your workflow and where what elements are coming from.
To my knowledge you cannot burn a dmg out of DSP. You can export an img. If you are opening a dmg and then using those elements to create a DVD then there may be a problem with some of the elements.
If the DVD simulates fine than build it to your desktop in a new folder. Open the Video_TS in the Mac DVD player application and confirm all is well. If it doesn't play right than there are issues with your files in DSP.
You should be able to take the folder of build files to a PC or Mac(with the proper software) and burn a DVD in Nero or just about any other program.
You can have a DVD with mixed tracks(some 16:9 & some 4x3). If DSP is making the tracks 4x3 when added then somehow that info is being associated with the file in the workflow.
Need more info to be of more assistance.

CDs will only burn 50 minutes

Even though CDs show successful burning, they quit playing properly at about the 50-52 minute mark when I play them in any CD player. This happened with my previous operating system, and now with 10.5.5 as well. It's not bad CDs -- this has been happening for some time. Any ideas?

If the burn speed is set to "Best" try x8
Best is always too fast

Encore CS3 not burning to disc?

Hi all,
I am using CS3 Encore and up to now have been very successful when creating a Blu-Ray DVD.
Most of my footage has been around 1-11/2 hours long so I have always left it on Auto transcode and its been fine.
However, I have created a project at 1 hour 57 mins but now after waiting 7 hours each time for rendering, it pops out the disc and tells
me that there is a Encore CS3; Blu-Ray burning .... "Device Error", Code "3", Note: "AS-Storage Error= -97140.
I have also burned an image file which ends up as a 23.83 GB file, leaving just 1.17GB space on disc but will not burn?
I have reverted to burning a 1 1/2 disc and it does it fine. I am told by another that the file ends up as too larger a file to burn?
OK, as nobody seems to have solved this issue while searching the net, I was wondering if I could get some help with the transcode settings?
The transcode setting have been change by me many times from.... Min 1.5 Target 25 Max 30, Down to Min 1.5, Target 17, Max 20.
However, the final project before going to burn is still 23.83GB, and the same error: Encore CS3; Blu-Ray burning .... "Device Error", Code "3", Note: "AS-Storage Error= -97140 is showing after ejecting disc?
can anyone please help?
Thanks
Alan Grove

Hi Jeff, thanks for that I will give it a go.
Something I dont understand?
When I put project together it says in EN that the disc has 12gb used with
12Gb unused.
Yet when I build it tells me that the disc has used 23.83 GB and has 1.7Gb
free?
I wish I understood these bloody programmes he he.
I am used to just putting in a disc and being told immediately if it will
burn after 7 hours waiting?
Cheers
Alan

Encore CS3: Not closing DVD's

I had no issues with Encore 1 or 2, but ever since I've installed Encore CS3, my DVD's are still "open". This is confirmed by using Roxio 9's disc properties.
The reason this is important is, my DVD dubber will not dub open discs. I need them closed.
Is this a bug? Again, when I burned DVD's with Encore 2, they were fine. It wasn't until I upgraded to CS3 (just two days ago) when the 'open disc' issues started.

Most applications will dub open DVD's.
The problem I ran into is, I have a DVD duplicating tower and it just won't accept open DVD's. We've contacted the manufacturer and that's just the way the machine and drives work. The DVD's need to be closed.
Again, this is the only system that I've ever run into a problem (regarding open DVD's).
That's probably why Adobe isn't getting many complaints. Most people are using Nero or Roxio, which isn't giving them any issues when dubbing. Since my company is using a specialized dubbing system (which the average user wouldn't own), I seem to be one of the few who are noticing this issue.
and Minu, I'm confused about you saying that DVD-R's are being closed, because that's not the case with me and the Adobe tech even confirmed that Encore CS3 will not close DVD-R's.
p.s. I see jbowden posted while I was typing this. Yes, this is only an issue with certain dubbing systems that require closed DVD's.

Encore CS3 will only burn in Admin

Similar Messages

Maybe you are looking for