Encore CS4 DLT not recognized when creating master copy

I'm trying to create a css encrypted DLT master in Encore CS4. Entire project was done in CS4 production suite. The problem is encore does not see the DLT drive (Quantum DV-4). It is recognized in device manager and functions properly (Vista Home Premium 64) and yes the driver is current. Is anyone successful in creating DLT masters in CS4 with a similar configuration? Any help would be appreciated.

I never found a solution. However I did find that Vista requires you to run Adobe software in an administrator mode to access certain features. I was unable to use my dolby 5.1 free trial surcode outside of administrator mode. Running admin mode solved that problem. So I never got to test this with the DLT tape drive because I had returned it.
Right-click on the shortcut for the program
Click on the Advanced button
In the Dialog window that pops up check the box ‘Run As Administrator’

Similar Messages

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • [SOLVED]Hard Disk not recognized when installing

    Hey all, I'm just starting with Arch and I've had some trouble installing it on my Acer netbook.
    My first installation went well except that I had forgot to download the wireless tools so I decided to do a fresh install as I had no access to a wired connection at the time.  The second installation attempt must have had some error on my part as Arch failed to start after selecting it from Grub, saying that the kernel was not available/not recognized.
    Now my subsequent attempts at installing have failed because the hard disk is not recognized when running either cgdisk or cfdisk.  Instead of showing my hard drive partitions after running
    cfdisk /dev/sda
    it shows my usb drive. If I instead use
    cgdisk /dev/sda
    it displays an error saying that the disk is damaged or not recognized.  When I first saw this I thought my disk was failing, so I tried #! to see if it would show the same error, but it was able to recognize the entire disk and install correctly.  Now, even after having the entire disk formatted as ext4 with #! installed, cgdisk is still giving me the same error about a damaged disk.
    Am I doing something incorrectly or is there a fix for this?  I haven't been able to find any information about this after a good while of searching.
    Thanks for your help.
    Last edited by Forest_Leaves (2013-03-05 08:30:24)

    srs5694 wrote:The cgdisk "damaged disk" error is probably a result of the tool seeing an MBR partition table on your USB flash drive, rather than the GPT disk it's expecting. If I'm right, you should not follow s1ln7m4s7r's advice, since that will simply trash your USB flash drive!
    If you mean by trashing the USB flash drive, that it will delete all data and partitions on the selected drive it is correct, because:
    dd if=/dev/zero of=/dev/$disk bs=4096 count=1
    - this will delete all partition-table data
    sgdisk -o /dev/$disk
    - this will clear out all data. This includes GPT header data, all partition definitions, and the protective MBR.
    /dev/$disk
    - this will make you enter ncurses-based GUID partition table (GPT) manipulator, where you can create new partitions
    You should only do this if you are certain of what disk it is.
    Now if when you said this, you were meaning it will became broken, then it may be a special kind of usb drive because i've donne it many times and i've not broken any.
    srs5694 wrote:My guess is that either your hard disk has become /dev/sdb (this can happen in some cases; disk identifiers aren't really fixed) or you're missing a driver for your hard disk controller because you've booted a different kernel or a different initrd file. Another possibility is that there's a hardware fault -- probably a loose cable -- that's preventing the kernel from seeing the disk.
    If the usb drive is not where you installed arch, then you need to find if there are more recognized drives:
    lsblk | grep disk
    And see the uuid of the root partition you want, and add it to your bootloader boot line:
    blkid /dev/sdxx
    Last edited by s1ln7m4s7r (2013-03-04 19:17:36)

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

    When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
    Thanks for the help.
    Michael

    Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
    By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

  • Disabled ipod not recognized when plugged back in to itunes.

    Daughter's disabled ipod (second time) is not recognized when we follow instructions to enable it and plug into itunes.

    HT1808 is the article you need to follow. You need the section labeled "Placing the device into recovery mode."
    You need to power the device off. Once the device is off press and hold the Home button or the button on the front of the device and while holding the Home button plug in the device and continue holding the home button until you see the image below.

  • HT4528 My Apple ID or password is not recognized when I tried to download an app. I reset my password but it still did not work. My id and password worked fine on this website.

    My Apple id and password is not recognized when I tried to download an app. I reset my password but it still did not recognize it. This website recognized it.

    Did you go to Settings>iTunes and App Stores and sign out and sign back in?

  • Serial number not recognized when I update lightrrom

    serial number not recognized when I update lightrrom

    More specifics might be helpful, but try this info site
    Lightroom and Creative Cloud FAQ

  • I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What should I do?

    I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What do I do?

    Is the iPod Touch specifically stated as being compatible?  Have you tried to perfrom a hard reset of the iPod with it still connected?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • I have downloaded Flash and it says sucessful install and yet is not recognized when I go to YouTube

    I have downloaded Flash and it says sucessful install and yet is not recognized when I go to YouTube

    Flash Player Help | Installation problems | Mac OS
    Flash Player Help | Installation problems | Flash Player | Windows
    Mylenium

  • When creating system copy of PRD sistem to QAS system how to create transpo

    when creating system copy of PRD sistem to QAS system how to create transport request queue on QAS with:
    everything transported to QAS previously but
    not transported to PRD.
    We have an approval procedure with delete form queue on QAS after import.
    Basically all tr.req from import queue(there I do not have delete from import queue) should be entered in same sequence to QAS.
    I know how to add technically one transport request to queue but how to do that for many(all)

    Jan
    Check the import history of both QAS and PRD from a date which is just after your previous system copy.
    Use the V-lookup function of MS Excel. You can determine those request which were there in QAS but have not been moved to PRD yet.
    Now, if you want to add multiple request in the import queue , I would recommend to do it from OS level but writing a script.
    You will find multiple threads in SDN for how to add request in import queue from OS level. Below one might be helpful
    Link: [Re: need TP command for Add  Transport Request to import Queue all at a time;
    Regards
    Anindya
    Edited by: Anindya Bose on Feb 22, 2010 10:02 AM

  • Partner Role not coming when creating the Vendor Master

    Hi all
    There is a standrd role AZ.
    There is a standrd Partner Determination procedure  L1.
    The role AZ is assigned to the Partner Determination procedure  L1.
    When creating the vendor master in MK01 the role is not coming in the list of partner function.
    For Document types there is a standard shema 0002.
    The role AZ has also been assigned to doc type.
    What can be the reason.
    Is the assignment against doc type at all required.
    Please suggest.
    Regards

    The procedure for setting partner functions:
    Step 1
    Vendor Account Group
    IMG->LOGISTICS GENERAL->BUSINESS PARTNER->VENDOR->CONTROL ->DEFINE
    ACCOUNT GROUPS AND FIELD SELECTION
    Step 2
    Defining Partner  Schemas
    IMG->MATERIALS MANAGEMENT->PURCHASING->PARTNER -> DETERMINATION -
    >PARNER SETTINGS IN VENDOR MASTER RECORD
    ->DEFINE PARTNER SCHEMAS
    Step 3
    Assign Partner Schema
    IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION->PARTNER 
    SETTINGS IN VENDOR MASTER RECORD->DEFINE PARTNER SCHEMA
    „«  THEN ASSIGN PARTNER SCHEMA
    Step 4
    Define  Permissible Partner Role Per Account Group
    IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION -
    >PARTNER ROLES ->DEFINE PERMISSION PARTNER ROLES
    If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
    IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION -
    >PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION 
    PARTNER SCHEMAS
    And then
    ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
    Once you have this configuration then you change your vendor in easy access menu (XK02-select partner function) define the partner roles.

  • Photoshop CS4  shuts down only when creating new project.

    I've had CS4 web premium since nov. 08 and everything worked fine until the most recent update from adobe.
    I ONLY have this problem with Photoshop cs4: when creating a new project after selecting the aspects (name, width, hight, etc.) when you press ok it shuts down and no error is given as to why it shut down, it just does.
    opening documents that had been created prior to the last update isn't a problem, I'm able to do everything Photoshop cs4 has to offer.
    I can also open a file started in another program and edit them in PS CS4 (ie: fireworks , or AI).
    but for some reason if I want to start a project in photoshop it just shuts down, never used to happen. any clues? any one else have a similar problem and know how to fix this?
    running on windows XP

    I think you mean a new docuement - Photoshop doesn't have "projects".
    Photoshop shouldn't "shut down" - there should be some message about a crash.
    And the most likely causes at that point are OpenGL (try turning it off in prefs) and your default printer driver (try changing default printers).

  • IPhone 4 not recognized when connected to new USB 2.0 card

    I have an iphone 4 OS4.1 on a no-name Windows XP Pro (service pack 3) PC with an AMD processor and lots of RAM.
    I had the phone working and syncing beautifully with the onboard USB 1.1 but it was slow. So I bought a new PCI USB 2.0 card and installed it. Card is installed and there are no problems according to the status in System Devices.
    But the computer does not recognize the iphone when plugged into one of those ports. If I plug it into one of the USB 1.1 ports that are still in the machine, it syncs and works fine. If I plug it into one of the new USB 2.0 ports, the PC shows the window at bottom right saying the device is not recognized. Tried the wizard but it's useless.
    THOUGHTS?????

    Nevermind!!!
    It turned out to be a faulty cable! I tried it with a different sync cable and it works fine!
    So disregard the question above.

Maybe you are looking for