Encore CS4: Menü kopieren- Buttonnummern verdreht

Hi,
wenn ich eine Menüseite kopiere um die gleiche Seite nochmals in einer andern Sprache zu machen verdreht mir Encore die Buttonnummern.
Sprich, Button 1 im deutschen wird zu Button 7 im englischen.
Bei Buttons die nur unterstrichene Textebenen sind tauscht mir Encore dann sogar die Texte aus. Der Button heißt dann z.B. im englischen anstatt "Hauptmenü" auf einmal "Button 3"
Die Verknüpfungen bleiben aber bei der originalen Buttonnummer, also verweist mein Button 7 im englischen auf Film 1. Verstanden?
Warum ist das so und wie umgehe ich das?
Gruß
Christoph
http://www.psd-tutorials.de/modules/Forum/148_videobearbeitung/97705-encore-cs4-menue-kopi eren-buttonnummern-verdreht.html

Automatisches Umbennen kann man ausschalten im Eigenschaften Panel (automatische Bennenung) und in CS4 gibt's dafür auch 'ne globale Voreinstellung. Die Nummerierung ist gewollt, nur funzt es halt manchmal nicht so, wie man das gern hätte. Uralte Macke. Kannste nix machen, einfach Knöpfe wieder umbenennen.
Mylenium

Similar Messages

  • Encore CS4 Menü Probleme

    Hallo zusammen,
    Ich arbeite gerade an einem Kapitelmenü, mein Hauptfilm besteht aus 9 Kapitel. Habe demnach auch neun Buttons die einwandfrei funktionieren.
    Jetzt habe ich neben den Buttons eine Landkarte abgebildet, die je nachdem welcher Kapitel angewählt wird eine andere Ortschaft anzeigen sollte.
    Jetzt zu meinem Problem:
    Wen ich den Button und das was zusätzlich auf der Karte angezeigt werden soll in den gleichen Ebenen-Ordner in PS (z.b. (+) Rückfahrt), dann wird der Buttonbereich in Encore so gross, das sich die 9 Buttonbereiche überschneiden. was ja nicht geht.
    Wie kann ich es machen, das wen ich einen Button z.b. unten links anwähle, oben rechts im Bild zusätzliche informationen auftauchen?
    Und nicht nur der Button sich verändert.
    Gruss Hans

    Also im DVD Studio Pro 4 hat es funktioniert mit der Funktion Ebenenmenü.
    Ja, schon, aber Ebenenmenüs sind Kacke, weil eigentlich auch nur ein Hack unter Ausnutzung eines anderen DVD-Spec Features. Unabhängig davon, hat das eine mit dem anderen nix zu tun. BD Menüs funktionieren nun mal ganz anders als auf DVD und schlicht und ergreifend verwendet ihr das falsche Tool, wen nihr von Encore solche Wunderdinge erwartet.
    Mylenium

  • Come riprodurre i files Bluray fatti con Encore CS4?

    Come riprodurre i files Bluray fatti con Encore CS4?
    I have a bad english, thus I want put a question in italian instead of english, because the translation is very complex:
    Ho creato una cartella Bluray di prova con Encore CS4.
    Lui mi ha creato 2 cartelle "BDMV" e "CERTIFICATE".
    Dentro a "BDMV" ci sono tutte le cartelle che contengono i metadati + 2 files principali nella cartella radice, che si chiamano "index.bdmv" e "MovieObject.bdmv".
    Ho chiesto informazioni alla Cyberlink:
    "...- Vorrei sapere, una volta creata una cartella Bluray con AdobeEncoreCS4, (anzichè masterizzarla su disco Bluray), se si può aprire il file
    "index.bdmv" o "MovieObject.bdmv" contenuti nella cartella BDMV di default, con PowerDVD9?
    Insomma, come far partire una cartella BDMV anzichè un disco?
    - Oppure se è possibile solo con PowerDVD10?
    Horsepower..."
    Mi hanno risposto:
    "...questo non e possibile con il programma PowerDVD 9. Il software e previsto riprodurre solo BluRay originali o contenuti BluRay creati con i software di cyberlink.
    Cordiali saluti
    Bledar Milaqi..."
    Ho provato ad aprire il file "index.bdmv" con Cyberlink PowerDVD10 Mark II Versione 10.0.2113.51, ma nulla da fare, non si apre.
    1) Che Player (possibilmente commerciale e rinomato, conosciuto) bisogna utilizzare per riprodurre i dischi Bluray su PC, salvati come cartella?
    2) Insomma, esiste un Player universale che riproduca i Bluray su PC per testarli prima di scrivere (masterizzare) un disco Bluray per lettore standalone da salotto?
    3) Come si può fare per aprire i dischi e le cartelle creati con EncoreCS4 sotto formato BDMV?
    4) Il formato BDMV che sta per (Blu-ray Disc Movie) con menù e sottotitoli, non è ancora standardizzato?
    Grazie infinite per una risposta!
    Horsepower0171.

    Jon Geddes said:
    2) We use PowerDVD 8 Ultra for all our testing. This version of PowerDVD has flawless playback of Blu-ray Images created by Encore (at least in our testing it has). We recently tried their latest PowerDVD 10 Ultra and it failed to play back most of our Blu-ray images, claiming they were an unsupported format. We contacted Cyberlink and they refused to help as mounted images are "not supported" by them. Get the older version if you can. You will also want to use the free Daemon Tools Lite application to mount the iso image to a virtual drive before playing with PowerDVD.
    I installed Windows7 Ultimate x64Bit.
    I installed EncoreCS5.
    I tried to create a Bluray folder with EncoreCS5.
    I tried also to create an .ISO (Bluray) image file.
    I installed PowerDVD 8 Ultra Version: 8.0.3228g.50 (with the lastest update on the Cyberlink website).
    But nothing changes from the PowerDVD 10 installed version:
    - I cannot open any "index.BDMV" file, nor "MovieObject.BDMV".
    - I can just open the ".m2ts" files contained in the "STREAM" folder.
    But I cannot open any Bluray menu.
    - What file should I open with PowerDVD 8 Ultra for playback the Main Menu?
    - How can I do to open the Bluray Main Menu as folder or as ISO image, prior to burning the Disc?
    - I also heard that Bluray can be opened and viewed with "Media Player Classic Home Cinema 64bit + CoreAVC 64bit.
    Any suggestion?
    Thanks!
    Horsepower0171.

  • Encore CS4 Authoring. Brauche HILFEEE!

    Liebe Leute,
    ich sitze bei mir im Betrieb und soll eine Blu-Ray via Encore CS4 erstellen.
    Leider hab ich dies noch nie in meinem Leben gemacht und mein Ausbilder hat da auch keinen Plan.
    Naja muss man eben durch.
    Meine Frage nun:
    Wie erstelle ich Skripte in Encore CS4 um meine Blu-Ray zu programmieren?
    Also die einfach wegen haben sich mir erschloßen, mit dem Drag-&-Drop Prinzip und dem Endsprung aber folgendes beispiel:
    Ich habe eine Menüseite mit mehreren anwählbaren Interviews. Diese sind auch alle definiert und es funktioniert wunderbar.
    Allerdings gibt es oben den Button "Alle Interviews abspielen". Wie kann ich dem Programm nun sagen, dass alle Interviews abgespielt werden sollen, wenn dieser Button angewählt wird.
    Ich hoffe mir kann jemand helfen, da es auf meiner Arbeit keiner kann und natürlich drängt die Zeit!
    Danke schonmal für die Tipps!!!!
    Gruß,
    Willaey

    Hier gibt's  auch noch weitere Antworten.
    http://forum.slashcam.de/blu-ray-authoring-encore-cs-4-hilfeeee-vp609767.html?sid=e413a366 561775e5ce31357b2e65d97d#609767
    Warum kommt mir die Fragestellung so bekannt vor?? 

  • "Touch-DVD" in Encore CS4

    Ist es in Encore CS4 möglich eine "Touch-DVD" zu erstellen? Ich hab keine  Ahnung ob es überhaupt so heißt. Bei uns heißt es so :-)
    Ist für eine Messe gedacht und soll folgendermaßen funktionieren.
    DVD läuft auf einem Touchscreendisplay. User wählt einen Film im Menü  aus.
    Film läuft ab. Drückt der User während des laufenden Films auf den  Bildschirm springt die DVD ins letzte Menü zurück.
    Bei unserem alten Authoringsystem Spruce Maestro funktioniert das ganz  einfach indem man eine vollflächige Schaltfläche über das Schnittfenster  legt und diese Schaltfläche aufs letzte Menü verweisen lässt.
    Hat wer ne Ahnung?
    Grüße

    Ist leider so nicht möglich weil Encore ja nur 1GB für Menüs an Platz zur Verfügung stellt. Wir würden aber so oder so eine DVD-9 benötigen.
    Habe aber gerade erfahren, dass sie das jetzt doch als BD wollen. Da sollte es ja mit PopUps funktioniere, oder?
    Hab damit noch nie gearbeitet.
    Danke und Gruß
    Christoph

  • [Encore CS4] Garder la position du curseur en mémoire

    Bonjour,
    voilà ma question est toute simple : je dispose d'Encore CS4 et j'ai réalisé un DVD, avec plusieurs menus. Chaque menu comporte plusieurs bouton menant à des vidéos. Ce que je voudrais, c'est que quand je clique sur un bouton, une fois que la vidéo est terminée, je revienne sur le menu (ça, ça va), et que le curseur soit sur le bouton que je viens de cliquer (histoire que l'utilisateur s'y retrouve). A l'heure actuelle le curseur revient par défaut sur le premier bouton du menu.
    Merci d'avance !

    See this page:
    http://help.adobe.com/en_US/encore/cs/using/WSbaf9cd7d26a2eabfe807401038582db29-7f97a.html
    Read it all! But you are looking for the part (toward the bottom) "Set timeline navigation" among other sections.

  • Disc image file exported from Encore CS4 won't work

    Hello,
    I have a problem concerning the export of a disc image file in Encore CS4. I recently upgraded to CS4 and wanted to continue my project which I started editing with CS3. While working with CS3 I already did image files from this project for burning and testing the DVD. Back then it worked with no problems.
    However, since using the CS4 version Encore does the image without any problem, but I can't use the image file in any way afterwards. I mounted it with Daemon Tools as I did before, but the DVD won't play in any software DVD player I have installed (Media Player Classic, Windows Media Player, Nero Showtime) nor can I access the file structure over a file manager. Nevertheless NeroInfoTool and ImgBurn say there is a DVD in the virtual drive. Then I exported the DVD project into a folder and now I can see the files in the file manger but again no player will play it.
    Has anyone experienced this before and is able to help? It would be very appreciated since I don't want to downgrade back to CS3 :-)
    It's Encore CS4, Version 4.0.1.048 on a 2,8 GHz HT CPU, 2 GB RAM, Nvidia Geforce 6800 UT, lots of HDD space, XP + SP3.
    Thank you,
    Chris...

    Hey,
    thank you both. As I said no player accepts the project exported to a folder. It doesn't matter if I point the player to the video_ts.ifo or just the folder - it won't play. As a consequence I re-installed Encore CS3 in which exporting worked fine and guess what - the exported image and folder output doesn't work either. Since it worked before in CS3 it comes down to the conclusion that either I did some editing to the project that screwed the project or Encore CS4 did. Checking for mistakes in the project and previewing in inside CS4 everything seems fine. So might it be CS4 that ****** up the project file??? I mean it's full of strange bugs so it could easily be that. I even updated my Daemon Tools yesterday and it won't make a difference.
    Or could it be something else I haven't considered yet? Any ideas? I just don't want to build the whole project again which might not even work if it's some other error. This is a desperate call for help
    Thanks,
    Chris...

  • "File not found" error when I try to render an animated menu (on mac) Encore CS4

    I'm making a dvd with at least 2 animated menus. It means that I have a 1 movie in the background of each menu. Over my background, I have 3 thumbnail buttons which contain a small piece of movie animated movie too. When I try to to view my menus, in order to see the animation in the background and in the thumbnails I need to render the animation through File - Render - Motion menus.
    The problem is that it works for the first menu but then when I continue my navigation to the second menu that has animation in background and thumbnails too, if I choose Render Motion menus,after 3/4 of the rendering it says "file not found" even if all the files are well in place in their folders.
    Does anyone would have an idea of how to resolve this stupid problem that prevents me to burn my project on a DVD since the same errors will appear during the burning process (I use a mac with Encore CS4). Is it a bug? What are the solutions? Thanks for answering.
    Steven.

    SteveDVD,
    The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
    If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
    And yes, the re-Importation should yield the same result as Linking/re-Linking.
    Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
    That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
    Good luck,
    Hunt

  • Encore CS4 asset import creates black images

    Running Encore CS4 on Win 7 32-bit;   4GB RAM,  Radeon 7750 graphics
    If I do an Import of assets, namely a bunch of standard, out of camera jpegs, about 2.5-4MB in size, then CS4 imports them but anywhere from 10-100% of them will just be black images.  
    Only solution I've found is to clear out the bad ones, save, close project, re-open project, re-import.  Sometimes you can only import them one at a time without going through a close/open project step.  Just clearing the image and trying to re-import without  closing the project never works.
    Worse - after re-opneing the project, sometimes some of the 'good' images have gone black and have to be re-imported.
    Never had this problem with Encore 2.0.
    Not having this problem with Encore CS3, but a CS3 project opened in CS4 also displays a bunch of black images which were OK in CS3.
    So 2 questions
    - anybody seen CS4 being so stupid as this? and have a real fix? (as it took me 4 hours to add 60 images yesterday, which is ridiculous)
    -  given CS3 seems to work (and opens projects much faster), is ther any downside to staying on CS3?

    The links below are about editing, not authoring, but may help
    Pictures that are "overly" large may cause video editing problems
    Photo Scaling for Video http://forums.adobe.com/thread/450798
    -HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
    -PPro Crash http://forums.adobe.com/thread/879967

  • Windows 8 Encore CS4 Blu-ray BSOD

    I'm getting a BSOD in Encore CS4 when I try to build a blu-ray project. I have an HP laptop with an LG USB blu-ray burner. When I click build, even to build just an image, and then change from "DVD" to "Blu-Ray", there is a hang then a BSOD. My crashdump indicates that pxhlpa64.sys is the culprit.
    This seems to be relevant, BUT the solution is to upgrade CS6 to new patch:
    http://forums.adobe.com/message/4672190
    I'm up-to-date in CS4, so that doesn't help. However, it sounds related and I'm hoping that my copy of CS4 Production Premium is still supported.
    My version of pxhlpa64.sys is 3.0.78.0. WU can't find any updates as far as I can tell. I have not installed any drivers for my LG BE12LU38 Super Multi Blue, but it seems to be recognized and there are no updates via WU.
    Here is my crashdump analysis:
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    DPC_WATCHDOG_VIOLATION (133)
    The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL
    or above.
    Arguments:
    Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
              component can usually be identified with a stack trace.
    Arg2: 0000000000000281, The DPC time count (in ticks).
    Arg3: 0000000000000280, The DPC time allotment (in ticks).
    Arg4: 0000000000000000
    Debugging Details:
    DPC_TIMEOUT_TYPE:  SINGLE_DPC_TIMEOUT_EXCEEDED
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0x133
    PROCESS_NAME:  System
    CURRENT_IRQL:  d
    TAG_NOT_DEFINED_c000000f:  FFFFF80393BA8FB0
    LAST_CONTROL_TRANSFER:  from fffff80393e48853 to fffff80393cee740
    STACK_TEXT: 
    fffff803`93ba2128 fffff803`93e48853 : 00000000`00000133 00000000`00000000 00000000`00000281 00000000`00000280 : nt!KeBugCheckEx
    fffff803`93ba2130 fffff803`93d19e51 : 0000034b`321b0754 fffff803`93f6a180 fffff803`93ba2290 fffff780`00000320 : nt! ?? ::FNODOBFM::`string'+0x13c4c
    fffff803`93ba21b0 fffff803`93c2ae94 : ffffffff`ffd1dc08 fffff803`93c54502 fffff880`012a0740 fffff880`0318e9c0 : nt!KeUpdateRunTime+0x51
    fffff803`93ba21e0 fffff803`93ce7b2e : fffff803`93ba2290 00000000`279cdae1 fffff803`93c54580 fffff880`012a0740 : hal!HalpTimerClockInterrupt+0x50
    fffff803`93ba2210 fffff803`93cde643 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchLBControl+0x1ce
    fffff803`93ba23a0 fffff803`93d1b025 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxWaitForSpinLockAndAcquire+0x23
    fffff803`93ba23d0 fffff880`01298644 : 00000000`00000000 00000000`00000000 fffff6fd`4008aa48 fffff6fb`7ea00450 : nt!KeAcquireSpinLockRaiseToDpc+0x35
    fffff803`93ba2400 fffff880`01298c1d : fffffa80`0d3855c0 fffff803`93ba2559 00000000`00000006 00000000`00000005 : PxHlpa64+0x2644
    fffff803`93ba2470 fffff803`93d26406 : 00000000`00000001 fffff880`06da1c00 fffffa80`10ca75b0 ffff0083`95c9c410 : PxHlpa64+0x2c1d
    fffff803`93ba24f0 fffff880`00a76c92 : fffffa80`11549b18 fffffa80`0e1f9e00 fffffa80`0d4bfbf0 00000000`00000000 : nt!IopfCompleteRequest+0x446
    fffff803`93ba25d0 fffff880`00a29f30 : 00000000`00000000 fffffa80`0d494400 00000000`00000000 fffffa80`0d494400 : iaStorV!ScsiPortCompleteSrb+0x31a
    fffff803`93ba2690 fffff880`00a29762 : fffff803`93ba2870 00000000`00000000 00000000`00000000 fffff880`0476de14 : iaStorV!DeviceToHostCompleteRequest+0x530
    fffff803`93ba27b0 fffff880`00a76959 : fffff803`93f6cf00 fffff803`93ba2ab0 fffffa80`0d488630 00000000`00019ba2 : iaStorV!AHCIFinishIntProcessing+0xea
    fffff803`93ba2980 fffff803`93d15fd8 : 00000028`00000002 00000345`2a93dd9e fffffa80`0d66e010 fffff803`93ba2a00 : iaStorV!SpRequestCompleteDpc+0x45
    fffff803`93ba29b0 fffff803`93d155d0 : fffff880`00a7685c 00001f80`00ff00ff 00000000`00000000 00000000`00000002 : nt!KiExecuteAllDpcs+0x198
    fffff803`93ba2af0 fffff803`93d1a4ba : fffff803`93f6a180 fffff803`93f6a180 00000000`00183de0 fffff803`93fc4880 : nt!KiRetireDpcList+0xd0
    fffff803`93ba2c60 00000000`00000000 : fffff803`93ba3000 fffff803`93b9d000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    PxHlpa64+2644
    fffff880`01298644 48b90800000080f7ffff mov rcx,0FFFFF78000000008h
    SYMBOL_STACK_INDEX:  7
    SYMBOL_NAME:  PxHlpa64+2644
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: PxHlpa64
    IMAGE_NAME:  PxHlpa64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  475dd06d
    FAILURE_BUCKET_ID:  0x133_DPC_PxHlpa64+2644
    BUCKET_ID:  0x133_DPC_PxHlpa64+2644
    Followup: MachineOwner

    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484
    More on Encore and Roxio http://forums.adobe.com/thread/528582 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
    Run as Administrator http://forums.adobe.com/thread/969395
    Also, for CS4, right click the program icon and see if Win8 has the same WinXP compatibility mode that is available in Win7
    As far as support outside of this user to user group... I seriously doubt that Adobe will provide any help for a program that is 3 versions old, and which was written before Win8 was more than a Microsoft dream

  • Encore CS4 Missing Frames/Stops Starts  and Blue Screen Crashes During Playback

    I'm opening Premiere Pro CS4 with the default presets of HDV Capture, HDV 1080i30 software only mode. I'm capturing from my Canon HV20 using firewire HDV out 1440 x 1080. All goes well during the editing process but when I Dynamic Link and playback in Encore CS4 I observe dropped frames or stop and starts in Encore timeline sequence. At times I may even crash Encore with a Blue Screen. While still running Encore I can go back to Premiere Pro and play the timeline sequence with no issues. I will mention that I have the Matrox RT.X2 installed. But when starting a project I'm doing software only and disabling RT.X2 hardware playback. If I remove all effects in the timeline sequence and then Dynamic link to Encore the playback is normal with no effects. I did exported the Premiere Pro CS4 project using Adobe Media Encoder CS4 with a setting of MPEG 2 Blu-ray 1440 x 1080i 29.97 High Quality. I than import this MPEG2 back into Adobe Encore CS4 and it plays without dropping frames or hang-ups.
    Build
    Case: Coolmaster-830
    Op System: Vista Ultima 64 Bit
    Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
    Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
    Performed updates on all Adobe Production Premium Products as of 01/12/2009
    Matrox RTX2 4.0 Tools
    Main Display: Dell 3007 30"
    DVI Monitor: Dell 2408WFP 24"
    MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
    Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
    PS: Corsair|CMPSU-1000HX 1000W
    CPU: INTEL Quad Core Q9650 3G
    MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
    1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
    Cache SATA 3.0Gb/s
    2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

    Try to remember this:
    Encore "Tries" to playback from premiere pro.  If you have a full set of previews available, it will play those, but you are probably seeing a lot of dropped frames and choppy video if your previews in premiere are set pretty low.  What you can do to combat this--in my experience--is export your video from premiere into a whole file in full format (in a non-lossy format with full frames, and in it's proxy equivalent;  I use Prores LT for many projects, and export that as a final output from premiere), then have that encode in an h.264 format (which will maximize smooth motion and quality playback).  Now... ...In your encore project, you should be outside of your original formats and in the intermediary that encore will recognize, so you should have it "Locate transcoded file".  Once you have done so, it will playback that movie in the preview.  I've done it.  With CS6 and 4gb ram with a vidcard at 256mb and a core2duo 2.16ghz, it plays fine.  With CS4 the encoding takes a while, and if you go to dvd, even longer for compression to work properly.  I use Compressor to output AVCHD .264 stream and an AC3 file.  When I locate the transcode for BD, I locate the .264 file first, then I get asked for the AC3 file.  This allows me to import them both, and have Encore encode them into the transport stream without transcoding.  I use Distributed processing to get the job done quickly, as I have minimal access to several computers and have connected them by that method for a Render Farming setup.  It works well.  With a hardware based device playing back your files, you won't see the same performance in Encore.  It has to make two hops already to get to your video, and adding a third (goes from encore to Premiere, then to codec, then plays normally;  third step is to external hardware, which eats up processing like crazy when it has to come all the way back to an encoding output to screen through encore, adding more steps for the system along the way) really can slow down the performance in Encore.  IF you take the Steps out by encoding a finished playback stream, Encore will handle it quickly with it's own processing.  It really does work well.  If you don't like it, make your changes in Premiere, then re-encode with your hardware and make an h.264 file for encore again.  You can use AME, but you'll always get standard Blu-ray (old file-stream format; lesser res and quality).  You can use Compressor to make AVCHD which allows for 264 output that is PSF or progressive that is interpreted as simultaneous fields (fake interlace), or even solid progressive formatting for AVCHD compatible players, and you can render-farm it to speed up the encoding process.

  • Premiere and Encore CS4 crashes and issues on Toshiba Laptop

    I have a Toshiba Qosmino Laptop, 4 GB ram, Windows XP Sev pac 3, Nvida Gforce 7300 video. new 7500 RPM Hard drive
    The two programs that crash all the time are Premiere and Encore CS4
    Premiere will start some times and sometimes not. I've tried a new projects, importing a CS3 project seems to make no difference. Takes approx 2-3 minuites to load. Click on a imported video clip or timeline and crash.
    Encore crashes "EVERYTIME"... tried to import from Premiere into Encore.. when the timeline is clicked in Encore it crashes everytime. Tried a new project in Encore same problem. Started Encore alone and same problem... first click and crash.
    I'm not getting a blue screen just the Adobe crash report screen asking me to send a report... have done that many times.
    Things that I have tried:
    Had CS3 (BTY it ran fine)
    Uninstalled CS3 and uninstalled CS4. Reinstalled CS4 same problems.
    Defrag hard drive....
    Reinstall CS4
    Updated video drivers to latest version
    Reloaded older video drivers
    Did MSCONFIG and stropped all unneeded processes
    All the rest of the CS4 programs open and run fine.
    Any help is appreciated!!

    Sounds like a problematic video driver or codec issue. You need to update all your drivers and try again. Also get rid of any unnecessary codecs. Try opening files in various formats and see if the same happens. Also you should search the KnowledgeBase, it contains a lot of information about this kind of problem.
    If all fails, call Adobe Tech Support...

  • Received trascode loading error message when I tried to save a project in Encore CS4`

    I have Encore CS4 operating on Windows 8 64 bit.  I tried to save a project and received the following message: Error loading transcode preset Internal/Blu-ray NTSC SD MPEG-2.  The project is to be a DVD not BLU-ray.  I opened the original project as administrator....help
    Thanks,
    Bryan

    Yes, it let me create a project.  The error came when I tried to save...not save as...also came when I went to build the DVD.  It always saves before it begins to build and the same error message came up again.  It is a very simple DVD...no menus....just a plug and play.  It is a thearter performance that was shot and then edited in Pro and opening titles and credits added.  The thought is that the DVD would be put into the player and the timeline begins to play from the opening titles to the end credits...nothing fancy......

  • Encore CS4 suddenly crashing on startup

    I have been using Adobe Production Premium CS4 for several months now with mostly no problems... crash here and there but nothing major. While using Encore to author a Blu-Ray disc, the software crashed when I transitioned from Photoshop back to Encore. I was editing a menu in Photoshop like I have done millions of times before, with minimal crashes. I shutdown and walked away for the day. When I came back the next day and started Encore it immediately gave me a crash report screen, and has given me a crash report screen every time since, it does not even make it to the splash screen. I have tried the OpenGL solution, no good. Tried the Version Cue startup solution, no good. Latest video drivers, audio drivers, etc, etc. Tried the user settings folder removal solution, no good. Even tried re-installing the entire suite, no good.
    This makes no sense to me. I have successfully used Encore CS4 to master close to 20 DVDs since the release. There were no changes to the system from one day to the next. Any ideas?
    CPU Specs:
    OS: Windows XP SP3
    CPU: Dual Processors - Intel Xeon 3.2 GHz
    GPU: Nvidia Quadro FX 3400/4400 256 Mb
    RAM: 2 GB DDR
    Sound: Creative Audigy

    Did this by any chance start to happen after updating via the Adobe Updater to 4.0.1? This can - and does unless turned firmly off in preferences - run in the background.
    There have been issues with the updated version not playing nice with certain NVidia cards.

  • Encore CS4 Start-Up Problem

    Hi,
    When I try to open Encore CS4, either by creating a brand new project, or by using dynamic linking to bring in a short sequence from Primiere Pro, I get about 80% through the progress bar labeled "preparing transcoder settings" when I get the following error messasge, and the application crashes:
    Adobe Encore Debug Event
    Adobe Encore has encountered an error:
    [..\..\src\AMEPresetProber.cpp - 258]
    As best I can make out from the crash report, Encore is trying to run dvacore.dll when the crash occurs, although I'm not absolutely positive about this (I'm basing this on the program counter address where the exception_breakpoint occurs ; this address fell within the range populated by dvacore.dll if I am reading the crash file properly).
    I'm assuming the error message is telling me that a routine in the C++ source file AMEPresetProber.cpp was running at the time of failure.  I'm further assuming from the name of the file that Encore was looking through a list of Adobe Media Encoder presets when the problem occurred.  But of course, without access to the source code, there is no way to see what the program was doing, or what error code 258 means.
    If anyone has seen this problem, and has a suggestion on how to fix it, I would appreciate your input.
    As an FYI, I did carefully read a long thread about Encore CS4 crashes, and tried several of the fixes there -- Updating my nvidia card drivers, installing the "roxio" px patch, updating QuickTime, and erasing Encore's preference files.  I also checked Adobe's web site to see if there were any updates for Encore CS4 (I am running 4.0.1.048), but when I tried installing the only update available, I was told that it was older than the version I currently had loaded.  At this point, short of reloading the entire CS4 suite, I'm out of ideas of what to try next.
    I'm also wondering if there is something I could change with Media Encoder's settings that might help, since the problem seems to occur when Encore is looking over AME's presets.
    Thanks in advance for your input.
    -PTCruiser105
    P.S.  I'm running Vista Ultimate, service pack 2 on a dual-core 2.4G 6600 machine with 3GB of RAM.

    Hi Stan,
    Thanks for responding.
    Truth be told, I got so focused on the Encore problem, it didn't occur to me to see whether Media Encoder was still functioning properly on my machine.
    At any rate, I did byte the bullet, and re-install Encore, and the problem in question went away.  Interestingly enough, when you opt to re-install Encore, CS4 automatically re-installs Media Encoder as well, so I guess the two programs are pretty tightly joined at the hip.  Not surprising, perhaps, since I suspect that Encore is in some ways just a special case of Media Encoder, at least as far as the transcoding is concerned.
    Of course, once I got Encore up and running, I tried to bring over a very, very small sequence from Premiere Pro and build it, and Encore crashed again (In PproHeadless.exe call to  ImageRender.dll).  Frustrating, since as a newbie all I'm trying to do is understand how the sequence settings I'm using in Premiere translate into final DVD output.  The project I am working on involves a mixture of still images and short video clips culled from many sources in many formats, and my first renders in Premiere yielded lots of letterboxing (I'm learning the hard way about pixel aspect ratios and the like).  As such, I figured before I built too many sequeneces, I should find a set of settings and work procedures that yield good results.
    I used dynamic linking to bring over my sequence from Premiere, and I'm thinking that perhaps having both Encore and Premiere open at the same time requires too many resources on my limited system.  Time to go figure out other options for moving sequences from Premiere over to Encore to see if that is in fact the issue.
    -PtCruiser105

Maybe you are looking for