Encore CS5: Burning DVD is ok. Not so BD.

Hello,
i try to make a BD-image from a premiere pro video. It always makes a break, when writing begins with the message: "sequenz 01/xy.prproj", Exportdatei nicht gefunden. whats wrong? DVD runs without a Problem. S. Bedorf

Export out of Premiere Pro using the appropriate H.264 Blu-ray preset. Don't use Dynamic Link.

Similar Messages

Can burn DVD-RWs, but not DVD-R's

Can burn DVD-RWs but not R's. In fact, a blank R will not even show up in Disk Utility or Toast 6. Can anyone help me? Ronda? Duane? John?
BTW, unit has been fixed twice-once for logic board, another time for optical drive.
Ted

Tried two different brands. Will try another brand. Created new user, tried it under that as well with new prefs. No luck.
Ted

Encore CS5 burns just 1 GB on bluray

Hello from Germany!
I can't burn all the H264 material on blu-ray. I created in Encore CS5 with subtitles. The project check doesn't show any problems, in preview everything works like I want to. Disc-info shows that 4,33 GB are needed, but encore burns just 1 GB.
May be somebody knows ...
Thanks.
Inga

Can't copy the screen-shot of my (main) project-panel (it is tiff), I write it down:
Item               Duration     DVD-transcode-status     DVD-transcode-settings     blu-ray-transcode-stat     bu-ray-transcode-set. file-size
Video-file       00:18:41:11     non-transcoded          automatically                       transcoded                 automatically                       15 GB
Timeline          00:18:41:11     --                              N/A                                        --                              N/A                                        --
(The size of the timeline is not indicated in the project-window, but it is 3,88GB)
Maybe the problem is in interlaced and progressive???
My video is interlaced!!!
Waiting for your answer
and thanks a lot!
IJ

Importing avi hangs up at one second in encore CS5.1-then it goes "not responding"

HELP!
Everytime I import a short file name AVI Encore hangs up at
1 Second left" and then if I touch anything it starts "not responding." I have shut down all I can in the background to make this work and for some videos it brings them right in, for others- most of them- it hangs at the 1 sec left mark and then freezes.
Why is it doing this and what do I do?
Encore CS5.1
Windows 7 updated
6 GB ram, 32 bit system
I have a 2 gb video card as well installed.
Any help would be appreciated.
Thank you,
jana

AVI is a wrapper... what is inside the wrapper?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

My Matshita Optical drive gives me error messages that burning DVD's is NOT supported ?

I record and burn audio weekly. I dried burning DVD projects and i get the repeated error message the the drive does not support DVD burning.
Same result trying to burn from the Finder or Disk Utility. Anyone have a work around?

Do you get this error message with all current burn attempts, or simply with your most recent project?
If not, a PRAM reset has been known to be helpful.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.

Encore cs5 mehrsprachige DVD erstellen

hallo
hab einen film und möchte am Anfang eine Sprachauswahl erstellen bei der man unter 2 Sprachen auswählen kann.
Wie macht man das mit encore cs5 ?
Kennt jemand vielleicht ein Tutorial dazu ?
danke

http://help.adobe.com/de_DE/encore/cs/using/WSbaf9cd7d26a2eabfe807401038582db29-7e8ca.html
Mylenium

Low image quality, strange playing behavior of Encore CS5-authored DVD

Hello Forum.
looks like I'm becoming a frequent visitor here! Could do with a little more help.
A no-menu DVD I tired to make yesterday is shown plays in rather low quality. Also, it starts from about a minute into the movie, even though no chapters have been set (I have to rewind to see the beginning), and for the first split second it shows something that looks like 1 or 2 frames of 3/4 video that immediately stretches out to something that looks like 16/9 with dark left and right margins of about 7 pixels.
My workflow was this:
I exported the untranscoded footage into Encore, set up the First play to the Timeline and End action to Stop, tried to render but the render option was grayed-out, previewed the DVD in Encore (the preview looked fine) and then clicked Build.
My questions are:
1. How to make it work and --
2. What can I do for the maximum high quality of the DVD in Encore? (My client told me he saw someone making a 20 min DVD in full HD quality. Anyone knows how this can be done?)

Always feel free to drop by.
First, there are ways to Burn HD onto a DVD disc, but obviously the Duration will be greatly limited, due to the size of the destination disc. Not sure how they might, or might not, apply to Encore, but here is one ARTICLE on Muvipix, and here is an ARTICLE from the PrE forum on similar. Here is an ARTICLE from Elements Village, but I think it is basically a re-cap of material in the other two.
Now, to your DVD Project. Are you using ADL (Adobe Dynamic Link), or are you doing your Export from PrPro, and then Importing into En? If the latter, what are your Export settings?
Can you post a screen-cap of your En Timeline, just in case there's something there?
You might want to also post to the Adobe Encore Forum, as there are some users, who do not spend much time here.
What you describe is odd to me. I have not encountered such, nor have I read of it.
Good luck,
Hunt

Burned dvd gets error "not supported"

a friend gave me a dvd of an event that he recorded on his camcorder. i copied the dvd but the burned copy will not play in idvd 5 but the original will. the copy gives an error of "media not supported" or something like that. isnt it an exact copy?? do i need to try and import the video ts and audio ts files into imovie?

i copied the dvd
How did you 'copy' the DVD? iDVD isn't for copying DVDs - Disk Utility is for copying DVDs.
Unfortunately, Disk Utility doesn't seem to like to copy DVD+R discs. Toast is your best bet.
F Shippey

Encore CS5.5 error Code "6" Note "551584 11492896 11826176"

This is the type or errors I am getting when trying to create a Blu ray disk on encore 5.5 with latest update to premiere pro 5.5.2
I have encoded many project prior to this update but this one is giving me a lot of headaches.
I have encoded video from premiere pro h.264 w/ 25mbps 1080i and in encore I am trying to burn it onto disk but it gives me Error code "3" saying that device is not ready right before closing the disk. I have tried to create an image but getting this totally insane error code "6" how ever the image file was never created.
What is going on? Does anybody have any Ideas?

The OS you are using is unsupported.
This means that no results are guaranteed - at all.
It also means you are on your own if you insist on using unsupported OS.
Just because it worked once before does not mean it will ever work again. A simple Vista update or a driver update could change things completely. This is what "unsupported" means.
Sorry.

Optical drive reads audio cd's and burned dvd's, but not commercial dvds

I just upgraded my macbook hard drive, doing a clean install of Mac OS X on the drive in an external enclosure, then copying the remaining files, doing all the software updates, and swapping out my old drive. Everything works so far, except... the DVD player will no longer play commercial dvd's (movies and tv). The drive hardware seems ok, in that it reads audio CD's (through iTunes) and DVD's of tv shows burned on my home recorder... which suggests that the DVD player software is ok, too. Did a setting get changed in my software, where it thinks I'm putting in the wrong regional dvd type? The disk goes in, spins and makes noise, and, after a short while ejects out.

Here's what I get:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZF1E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds

Adobe Encore CS5.1 producing DVDs with flickering video

Hey all, new to the forums but been using Adobe software for a couple of years now.
I've got Encore CS5.1 as part of the Adobe Master Collection CS5.5, and recently I've been using it to burn DVD videos.
I made a video in Adobe Premiere Pro CS5.5 a few weeks ago and rendered it as an mp4 file in h.264 HDTV 24fps (video recorded with my Nikon D3200 D-SLR). I then imported the mp4 file into Encore as an asset (I didn't use Dynamic Link to insert the prproj file into Encore) and burned it onto a 4.7GB DVD (no menus or anything, just a simple DVD) and it looked absolutely fine on both my PC and on the TV and the recipient of the DVD was very happy with the result. The video was 28 minutes long and 6.2GB in size.
Recently I have been making more videos in Premiere Pro CS5.5 and attempting to burn them onto DVDs using Encore CS5.1, but I've not been having so much luck.
Whenever I create a DVD with Encore, the video playback is always a bit 'flickery' no matter how I import the video into Encore (have tried using both Dynamic Link and importing the mp4 file as an asset - both result in the same problem). The video playback results in flickering lines and it's really distracting. Again, I am rendering in mp4 h.264 HDTV 24fps and burning onto 4.7GB DVDs. If I watch the video in Encore on the Monitor, it also looks a bit flickery with lines showing. The video I am trying to burn onto a DVD is 25 minutes long and 4GB (but Encore transcodes it so it's just over 1GB in size I think).
I am also trying to burn another video onto a DVD which again is rendered in h.264 but is 48 minutes and 11GB in size (Encore transcodes it so it's about 2.5GB) and the same thing happens: flickery lines which is really distracting.
I did briefly have a trial version of CS6 installed and I rendered the video again in Premiere Pro CS6 and tried burning to a DVD using Encore CS6, but still got the same results. I don't have CS6 now, I installed it purely to see if CS5.5 was the problem.
I don't understand why the first video I burned to DVD using Encore was perfect and now it seems to be giving me flickery video once it's burned to a DVD whenever I use it.
I have updated it to version 5.1.0.342 which at the time of writing is the latesrt version of CS5.1.
If anybody out there could help me that would be great, thanks!

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Trancode burn hangs/crashes in Encore CS5 but works fine in CS4

Hi,
I've been reading lots of stuff in the threads about Encore CS5 crashing at various times, and I wanted to see if someone could shed some light on my circumstances..
Windows 7, LG Blu-ray burner, everything always worked fine in CS4.
I had been using Encore CS4 to burn my Premier CS5 projects because I couldn't ever get Encore CS5 to work prior to the latest update..
I did a new project in CS5 and when I did a rough cut burn it worked ok..
Since then, no joy.. It imports it from PP to Encore (CS5) and starts rolling, but then seems to freeze along the way in transcoding and crash. If I load the same project saved by Encore CS5 and try burning to blu-ray in CS4 it transcodes, burns and works.. So it does seem to be some difference between Encore CS4 and CS5. I really want CS5 to work for the promise of not needing to transcode AVCHD, and make it look worse
Couple of things to note that may or may not matter:
I read somewhere that "blank space in the timeline" crashes Encore CS5 .. I mean really? I have a couple of gaps of black in the timeline when I switch sections, but this never caused a problem before, and this seems like a bug that Adobe just couldn't have could they? For real?
I have both CS4 and CS5 installed. Does this matter? I haven't uninstalled yet, because CS4 works, and CS5 doesn't.
I have a GTX 295 (not the 285 and I did the "hack" to load and take advantage of the GPU's with the mercury engine). Everything in Premier CS5 seems to work fine, but admittedly, the one time I did get Encore CS5 to work, this was not in enabled and now it is.. Could this really matter?
Right after I post this I'll be doing that roxio update thing, but I have a pretty fresh copy of Win 7, totally updated that I the only thing I do with it is use it for Premier, so the point is I don't have a bunch of junk installed and use to for all sorts of other stuff.
I really want to fix this because I have noticed that after CS4 transcodes and I burn the blu-ray, it doesn't seem to look as good.. And since nearly all my footage is in AVCHD, and it wouldn't need to transcode it, this not only saves time, it probably looks better, so this would be a super powerful feature of Encore CS5 I really want to take advantage of..
Any ideas?

Thanks for the tips..
I changed every file including the name of the project to have no spaces.. I also don't have any breaks in my sequence, I'm not using a timeline, I'm just importing the sequence straight into Encore...
I don't think the GTX 295 thing could be related the only issues I'm having are in Encore, not Premier Pro..
But I guess the news now is that everything seems to be working pretty well and it looks to be transcoding, but I keep getting a:
"Blu-ray Object: Sequence 01/Cozumel_2010.prproj, Export file not found"
The Sequence part is obviously the name of my project file..
I've been trying to read about why this would come up, but no one seems to have an simple answer.. I've cleaned the media cache and renamed the project, but the old project name gets the same error..
And here is the point, as stated before, I open the exact same Encore project in Encore CS4, and bingo everything works..
D.J.

Subtitles suddenly displaying by default on burned DVD but not in simulator

Hello, subtitles which normally did not display until they were selected 'on' from a menu choice in the DVD are suddenly automatically being displayed by default when played on a stand alone DVD player for a television.
The subtitles however do not show up by default in the DVD Studio Pro simulator nor when I play from a 'build' folder using the Mac DVD player. Also, burned DVD's do not display the subtitles by default on two of my Macintosh systems when played with DVD Player (Macbook Pro and Powerbook G4 both running Leopard) yet the subtitles do display by default on a stand alone DVD player.
I have 'force display' off on the subtitle track (applied to whole subtitle stream).
I created brand new builds and can't figure out why this is suddenly occurring. I opened up very old projects and rebuilt them and they exhibit the same problems.
Anyone with any ideas? I recently upgraded from 10.4.11 to Leopard - is it possible that that would have caused the problem. Thank you.

I have not changed any settings on my set top Panasonic DVD player. The set top box can display subtitles but typically only does so when I choose it from a menu. This just started happening 2 days ago.
The same is occurring on another person's stand alone DVD player so I am fairly certain something is going on with the DVD build. The only major change I did recently was upgrade to Leopard and install the Apple software updates. There doesn't seem to be a preference or setting to display all subtitles in DVD Studio Pro - I am at a loss why this is doing this even with older projects that have worked perfectly and not been modified (just rebuilt and burned).

DVD drive will not recognize blank DVDs after upgrade to Lion.

It finds burned DVD/CDs but not blank ones. Disk utility partially sees blank dvd, gives option to eject it, but will not allow eject it. Finder does not see it at all. have to restart to have it eject. Tried different DVD's (Manufactures and -R / +R, etc). Have followed recommendations on resets and have even reloaded the OS. This problem started immediately after upgrade from snow lepoard to lion.

Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
I'll give it a shot in a few hours

Line of copy at top of photo in burned dvd at intervals.

I did a slide show in Iphoto. Added some text slides for birthdays. The I shared to IDVD and after reviewing the settings burned the DVD.
I get the following line at the top of the first slide and it pops up periodically during the slide show on the HD-TV I view on. the line of copy is
(Icon of a piece of film) 1 (music note) 1:LPCM 48khz/16Bit MBPS
How do you remove from the slide show or prevent it from getting on there in the first place?
Thanks

Why is the disc image fine but at least one of the burned DVD's, but not all, from the disc image having audio drift?
As I read what you wrote, you evaluated a disk image and had no problems, then made changes to the project involving the audio track and now have problems.
The 'drift' sure sounds like the 12-bit vs. 16-bit audio problem. See http://docs.info.apple.com/article.html?artnum=300741

Encore CS5: Burning DVD is ok. Not so BD.

Similar Messages

Maybe you are looking for