Encore cs5 motion menus not working when build to flash

Hello my question is this, I have created a dvd in encore cs5. I have created motion menus in AE.
Everything works great when I build to DVD. However when I export to flash my animated menu is working but the buttons (play move, chapter select , extras) do not show up until the animation is complete. Is this a simple fix? or should I make the menus static?

Hmm... what version of the Flash Player are you testing with
(full version, including release number)? You can find out which
version you're using here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
-Robert

Similar Messages

  • Encore 2 MOTION MENUs not looping more than 2x

    Gidday Neil & techies:
    I have created a wedding DVD. Burnt & both original Motion Menus looped forever. Did some alts, re-burnt DVD ... Now, one of the Motion Menus loops 1-2 times, then randomly plays one of the movies.
    (Definitely set to 'loop forever'.) I have re-re-rendered the motion menus, etc. etc. Still no luck.
    Hmmmm...

    Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
    Thanks again.
    Date: Fri, 17 Feb 2012 08:57:30 -0700
    From: [email protected]
    To: [email protected]
    Subject: Encore 2.0 motion menus not previewing?
    Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
    Here is another recent discussion... may help (or, of course, may not)
    http://forums.adobe.com/thread/962166
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Encore by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Motion tween not working when tested

    I have a situtation trying to get a motion tween to work. It woeks in the  time framw when I hit play but when I go to test it does not work. I can send file if soemone can help.

    Ned,
    was watching the below tutorial and desgined my text/tween similar on the page. On My page I am creating a Flash  Portfolio of some work. all the files work in myloader on the stage.  In the timeline,  when I move the  guide the text works. Also when I push Play it works.  But when I go to test it does not.
      The text is what I want to start as soon as the page loads. I do not have a code in action script because everthing i put deos not work. Hope you can help
    http://www.youtube.com/watch?v=dXCGKmO2EBU
    Tim

  • Why are moving menus not working in build?

    Recently, whenever I've tried creating a moving menu by putting tracks into drop zones, the project simulates fine, but the menus don't work when they're built. I've checked the VOB files and the problem is definitely there – it's nothing to do with the player.
    Today I created a simple project by automatically creating chapter menus and using several of the Apple templates, to create three menus for three tracks. The only elements I imported were three video tracks and their accompanying audio tracks. None of the menus works when built: one of them (using the 'City' template) is completely blank, in one ('Leader') the template's moving background doesn't work, but the clips in the buttons work, and in the third ('Filmstrip') the button highlights work, but the buttons are blank where the clips should be.
    I've also tried creating my own moving menu design, using drop zones that I've made, and the same thing happens. Yet in a previous version of DVD Studio Pro I've created similar menus that work perfectly.
    Has something broken in vsn 4.1.0? Anybody any ideas why this is happening.
    PowerBook G4 15 Al   Mac OS X (10.4.6)  

    its not you. I have the same issue and also attempted all the same troubleshooting techniques. Help!!

  • Menus not working when flash movie is added

    We have some menus on our portal and if we add a flash movie, the submenus under the menus will not work on IE6, however in IE7 and firefox it works fine. When we remove the flash movie all the submenus will work on IE6, IE7 and firefox.
    Any help on this?
    Thanks
    Here is the code for our flash stuff
    <object type="application/x-shockwave-flash" data="http://dddd.swf" id="FlowPlayer" height="270" width="360">
    <param name="movie" value="http://ddd.swf" />
    <param name="quality" value="high" />
    <param name="scale" value="noScale" />
    <param name="wmode" value="transparent" />
    <param name="flashvars" value="config={videoFile: 'http://dd/1/134263.FLV', autoPlay: false, loop: false, showMenu: false, initialScale: 'orig' }" /></object>

    You can try 3 things :
    - use full urls in your menu : http://your_portal:your_porta/portal/page/portal/... instead of just "/portal/page/portal/...."
    - embed" your menu code as well as your flash code with a complete html code (<html><head></head><body>...</body></html>
    - spceify some <base url=...> in the head section of each. There can be conflicts about this. When you say your menu does not work, you mean the links are wrong when you click on a submenu ? What is the url of the link and what is the url you're getting at ?

  • .jar not working when building project with netbeans plugin and log4j

    hey..
    subject tells everything..if i build my project referencing log4j, i get a .jar file with 280 kb which is executable
    if i add log4j and do some logging, code still works in netbeans, but buildung produces a .jar with 80 kb and an
    attached lib-folder with the log4j.jar in it..if i uncheck copy requested libraries, i just get the 80 kb .jar file which
    is not working
    any hints?

    Are you building the jar file using the fxdeploy ant task to build the Jar? That is required to have an executable jar file.
    Also there was a change to the netbeans project structure, which may be a contributing factor.
    Things to try: Upgrade to the latest netbeans 7.1 beta build, set up a new Java platform in nb that includes JavaFX, create a new JavaFX project and build it. This should produce an executable jar.

  • Motion menus not working after Leopard

    I see that other people are having problems with motion menu templates after installing Leopard. I tried trashing my prefs and that didn't work. Has anyone else found a solution to the issue. Thanks!

    What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
    Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

  • Encore 2.0 motion menus not previewing?

    I have been having some trouble with motion menus...I got a copy of Encore 2.0 several years ago and it worked fine then. I recently had a need for it again so I re-installed it and started a project.
    My problem is that even with the video transcoded, added to the menu, and the motion menus rendered, it doesn't show up in the preview. I can hear the audio, but it doesn't show the video. After tinkering with this for a little bit I went ahead and burned a disc, thinking that my problem was just a preview issue. The finished disc also doesn't work. You hear the audio and the buttons and timelines work fine, but no motion menus.
    I found a discussion on here a while back about changing registry entries (for when Encore gets hung up on importing) and I had a similar issue. I tried that and it worked. I wondered if something similar may be causing the motion menus not to work.
    I should mention that I tried re-installing Encore with no such luck.
    Any ideas?

    Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
    Thanks again.
    Date: Fri, 17 Feb 2012 08:57:30 -0700
    From: [email protected]
    To: [email protected]
    Subject: Encore 2.0 motion menus not previewing?
    Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
    Here is another recent discussion... may help (or, of course, may not)
    http://forums.adobe.com/thread/962166
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Encore by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Help menus not working for CS5 Production Premium

    I have installed the trial version of CS5 Production Premium on a Windows 7 64-bit PC. I canot get the Help menus to work for any of the applications.
    Is this a limitation of the CS5 trial version?
    I recently purchased Premiere Elements, but I did not deactivate it before installing Windows 7 on my PC. Would this interfere with the help menus for CS5?

    I think the Adobe site was down for maintenance a few days ago. My CS5 Help menus are working fine today.

  • Flash catalyst cs5.5 not working when i run the project

    when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.

    Vijetha wrote:
    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.
    hello vijetha,
    window and canvas show scroll bar when it need.
    You should show block property
    and set block scroll bar
    hope this helps..
    Hamid

  • Added preset motions to my interactive pdf file. It's not working when I export my file as an inter

    I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat

    So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file.  Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.

  • Hyperlinks to pdf files not working when project is exported out as SWF and uploaded to server

    hI all
    I'm using CS5 and i have hyperlinks to pdf files in my indesign project. However when i export to SWF, although the links work locally, they do not work when i upload all the relevant folders and files and test it from a server the links to the pdfs can not be found, the error messages indicates its looking for the files on my hard drive. I have also noticed that if i copy all the relevant folders and files and exported swf to a different directory and then launch swf from there the links do not work there either.
    Other than seperately uploading each pdf indvidually on to the server and then creating a hyperlink to it from the local indesign project i don't know what else to do.
    Any advice much appreciated.

    I have your same problem, but didn't consider uploading the PDFs and then linking to them. I'm willing to try it. Let me know if you ever found a better way, ok?
    Thanks.
    Lynn

  • Thunderbolt ethernet not working when computer wake up from sleep.

    thunderbolt ethernet not working when computer wake up from sleep.
    it will not happen in Mountain loin.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • Encore CS5.5 New Install crashes when I assign a drive to the project - Win7

    Encore CS5.5 open fine but when I have assigned a drive and named the project then enter, it crashes with this error:
    "Microsoft C+++
    Runtime error
    Program: C:\Pr....
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Then when I chose OK it says "the application has stopped running and Windows will search for a solution" of course it can't find one and so it closes the program.
    This is a new install and the first time I've tried to run Encore on this new computer.
    I've been editing in Premiere and exporting out thorugh AME just fine, but now I need to make a DVD and Encore won't stay open because of this error.
    I've tried opening to another drive beside the raid but I get the same error.
    I also have a Matrox MO2 aqttached but that doesn't seem to be a problem with Premiere either.
    Can you help?
    This is Win7 on an Asus P9X79 MB with Intell i73930 and 16 gigs of ram.

    >This is a new install and the first time I've tried to run Encore
    Have you checked to see if there are any updates for Encore?
    All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
    Have you also made sure Win7 is updated?
    And, some other things to check...
    As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
    Run as Administrator http://forums.adobe.com/thread/771202
    -Set to always "run as" via icon http://forums.adobe.com/thread/969395
    Odd Errors http://forums.adobe.com/thread/670174
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558
    And This Message Thread http://forums.adobe.com/thread/665641

  • Dbx does not work when debugging g++ exes.

    Hi,
    We are just getting started building our application on redhat el5 with sunstudio 12.
    We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
    We now can compile and link fine but dbx does not work when it is fed the executable.
    We get the error
    dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
    and dbx freezes.
    Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
    Any ideas ?
    The complete output of running dbx :
    Output from dbx :
    debug /ps_rels/Dev/linux_rhel5/exe/sx
    Reading sx
    Reading ld-linux.so.2
    Reading libz.so.1
    Reading libxerces-c.so.27
    Reading libxalan-c.so.110
    Reading libxalanMsg.so.110
    Reading libsde.so
    Reading libsg.so
    Reading libpe.so
    Reading libsqlite.so.0
    Reading libsqlite3.so.0
    Reading libgeos.so.2
    Reading libpng12.so.0
    Reading libX11.so.6
    Reading libXm.so.4
    Reading libXt.so.6
    Reading libXi.so.6
    Reading libXext.so.6
    Reading libXrender.so.1
    Reading libfreetype.so.6
    Reading libexpat.so.0
    Reading libfontconfig.so.1
    Reading libcairo.so.2
    Reading libglib-2.0.so.0
    Reading libgmodule-2.0.so.0
    Reading libgobject-2.0.so.0
    Reading libgthread-2.0.so.0
    Reading libpango-1.0.so.0
    Reading libpangocairo-1.0.so.0
    Reading libpangoft2-1.0.so.0
    Reading libatk-1.0.so.0
    Reading libgtk-x11-2.0.so.0
    Reading libgdk-x11-2.0.so.0
    Reading libgdk_pixbuf-2.0.so.0
    Reading libtiff.so.3
    Reading librt.so.1
    Reading libwx_gtk2_xrc-2.8.so.0
    Reading libwx_gtk2_qa-2.8.so.0
    Reading libwx_gtk2_html-2.8.so.0
    Reading libwx_gtk2_adv-2.8.so.0
    Reading libwx_gtk2_core-2.8.so.0
    Reading libwx_base_xml-2.8.so.0
    Reading libwx_base_net-2.8.so.0
    Reading libwx_base-2.8.so.0
    Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
    Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
    Reading libncurses.so.5
    Reading libnsl.so.1
    Reading libdl.so.2
    Reading libACE.so.5.5.1
    Reading libpthread.so.0
    Reading libpam.so.0
    Reading libm.so.6
    Reading libc.so.6
    Reading libstdc++.so.6
    Reading libgcc_s.so.1
    Reading libicuuc.so.34
    Reading libicui18n.so.34
    Reading libstdc++.so.5
    Reading libXau.so.6
    Reading libXdmcp.so.6
    Reading libXmu.so.6
    Reading libXp.so.6
    Reading libXft.so.2
    Reading libjpeg.so.62
    Reading libSM.so.6
    Reading libICE.so.6
    Reading libexpat.so.1
    Reading libXfixes.so.3
    Reading libXrandr.so.2
    Reading libXinerama.so.1
    Reading libXcursor.so.1
    Reading libXxf86vm.so.1
    Reading libaudit.so.0
    Reading libicudata.so.34
    Reading libnss_files.so.2
    Reading libnss_dns.so.2
    Reading libresolv.so.2
    dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
    Reading libnss_ldap.so.2
    Reading libcom_err.so.2

    Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
    A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

Maybe you are looking for