Encore CS6 Blu-Ray "fatal error" during build

I have an external ble-ray drive that I just bought from OWC for my MacBook Pro. I have created a project for a wedding that has 3 sequences. Everything looks good, and the building/burning process gets about 90% done and I get this:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
I am new with Adobe, especially Encore. This is my third try with the same message. I tried building to Blu-Ray disc as well as Blu-Ray image. I have several couples waiting on a Blu-Ray disc for their wedding video, and I can't produce one! So frustrated!
Any help is MUCH appreciated!
Josh

ElCuso12 wrote:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
This is actually a very interesting error message. There are 4 blu-ray authoring programs that can display a error message that contains "video buffer underflows" when authoring a Blu-Ray with H.264.
These 4 blu-ray authoring programs are: Sony DVD Architect Studio, Sony DVD Architect Pro, Adobe Encore and Sonic Senarist BD.
Another interesting thing is also that the complete error message that is displayed by both Sony DVD Architect Studio and Sony DVD Architect Pro is exactly identical, word for word, with the error message that is displayed by Sonic Senarist BD.

Similar Messages

Blu-ray: "fatal error", Code: "6"; "Note:"

Blu-ray: "fatal error", Code: "6"; "Note:"
That's the error I got when Encore CS3 started to actually write to the bluray burner.
It's worked many other times but this time it did everything except the burn.
If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
Real helpful, right?
Hope there some "real" help here.
Thanks,
Steve Garman
HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
Thanks,
[email protected]

Is it possible to burn a SD DVD correctly from an Encore CS6 Blu-ray project and content?

Hi all,
I shot and edited AVCHD 1080i30 (60i) square pixel video from a Sony NXCAM HXR-NX5U camcorder in Premiere CS6. I then exported the 1920x1080 edited mpeg2 blu-ray m2v file for import into Encore Cs6. Burning a blu-ray disc in Encore CS6 from this mpeg2 bluray m2v file is no problem and look great even with the default settings.
However, I also want to burn a standard DVD using the same HD Encore CS6 project without having to go back to Premiere CS6 and output a 710x480 mpeg-dvd file. I thought i could simply select the dvd format under the build tab in Encore thinking Encore would handle all the necessary conversions to burn a 720x480 DVD but the menus look jaggy and the video does not play smoothly.
Is it possible to burn a standard DVD correctly from an Encore CS6 HD project and content, or is it better to have Premiere CS6 output a 720x480 mpeg-dvd file and create a new standard 720x480 dvd Encore project instead?
Acording to Encore Help, it says "You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format.", but i'm not convinced Encore is doing things correctly.
Thanks.

Jim,
I tried a variation on your suggestion.
I exported a new m2v file using the mpeg-dvd from Premiere CS6 as you suggested with "Use Maximum Render Quality" checked to get better scaling from HD to SD. I imported it into my Blu-ray EncoreCS6 project by using the "Replace Asset" option and changed the "Project Settings" authoring Mode to "DVD" leaving the HD menu's "Aspect Ratio" at 16:9. I then built the disc using the "Build" tab DVD format and output settings.
It worked!
The jaggies are gone (except for some motion jaggies) and the DVD plays well.
I suppose I could have done something similar within Encore but I'll test that some other time.

Blu-Ray: fatal error

I'm getting an error when trying burning a Blu-Ray Disc.
Error:
Blu-ray Error: "Fatal Error", Code: "6", Note:"
using Tyan S2696A2NRF with LG GBW-H10N and Pioneer BDR-202
Any idea?

I'm having the problem again, and I even repair installed msxml 6.0. I think the problem may be related to the use of 29.97i format this time. My successful build last month was a 24p video.
I am taking 30p video and rendering it as 29.97i for Blu-print. I also am using one simple menu. Maybe I'll drop the menu and see if the build will complete. Could be a problem with the menu or the video being interlaced.

Blu-ray Fatal Error Code 6: Video Bitrate too High?

So I get this error every time I try to encode my Blu-ray disc. I am assuming that the bit rate I used to encode from Premiere was too high. Am I correct? If so, does this mean that I need to re-encode all of my assets at a lower bit rate before bringing them into Encore? Or is it some other issue? I did read all previous posts on this topic and couldn't really find an answer.
Thanks for any help.

Stan,
I don't fully understand either of your questions, but I am sure I can provide an answer that you will understand so here goes.
My audio files in Encore are actually wav files, but in my the root project folder they are ac3. Is ac3 an audio codec or something? I don't understand this. I guess they are session files, whatever that is... And why does this matter?
And what do you mean that Premiere and Adobe Media Encoder should not allow any peaks. Do you mean bit rate peaks?
And my only worry with making a modest drop in the bit rate is the fact that I have to render out almost 20 files before I can test out my Bluray burn again. This obviously takes some time to do and if it ends up not working it can be quite frustrating.
Thanks again for all of the help Stan. Hopefully I can fix it by just adjusting the bit rate.
- Jason

Question about custom PS menu in Encore CS6 Blu-ray project

I can't seem to find the answer to this anywhere. My project is in Encore CS6 for Blu-ray.
Basically, I have a documentary about a group of friends taking a roadtrip around the country. The film is broken down by days, which coincide with different cities they stop in.
For example:
- Day 1 they were in Atlanta, GA
- Day 2 they were in Tallahassee, FL
- Day 3 they were in Jacksonville, FL
- Etc
The problem I'm having is with the Chapter menu.
Here's what it looks like:
The Chapter menu it's a map of the region with the cities they stopped in and a graphic of their route with a line to each city.
Across the bottom of the menu are the Days to select, ie Day 1, Day 2, Day 3. These are the buttons to select and are not part of the map.
When the Days are selected with the bottom buttons I also want the cities in the map to be highlighted as well. But I can't figure out how to do this? When I bring the menu into Encore it gets all screwed up with selections all overlapping each other, because it thinks both the bottom Day buttons and the map city highlights are both buttons.
Here's what is happening when the menu is brought into Encore:
I only want the lower Day buttons to be selectable, and when they are chosen the city lights up as a separate informational graphic (which is not meant to be selectable as part of the button, just to provide the viewer additional information, in this case a reference on the map of where they are on each Day).
If someone can shed some light on how to do this I'd be most appreciative.

When the Days are selected with the bottom buttons I also want the cities in the map to be highlighted as well. But I can't figure out how to do this? When I bring the menu into Encore it gets all screwed up with selections all overlapping each other, because it thinks both the bottom Day buttons and the map city highlights are both buttons.
When you put the red dot inside the button group for that button, you make it part of the button. That is the nature of the DVD spec. And the area of the button is defined by the whole rectangle the encloses all the elements of the button.
The problem with BigMan's option (which is the option) is that it won't work using a mouse on a computer - a mouse rollover doesn't trigger the selection of the button. It will work on a computer when using the software player's "remote."

Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''

Has anyone encountered this: Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''
Any ideas on what it means or how to fix it?
Burning to a BD-R. Tried two different Blu-ray burners. Created a Blu-ray Image first.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Also, Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

0x80070643 Fatal Error During Installation of PLEX Media Server Setup

Hi,
I had gotten a rather pesky virus and was finally able to flush it out thanks to Malware Bytes. However, now nothing will install.
Currently, I'm trying to install Plex Media Server, and I get the "0x80070643 Fatal Error During Install".
What can I do to undo this damage and get things to download smoothly again?
Just in case, here's a log of the last Plex install attempt:
[0184:1960][2014-04-10T13:10:58]i001: Burn v3.7.1224.0, Windows v6.1 (Build 7601: Service Pack 1), path: C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe, cmdline: ''
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'InstallFolder' to value '[ProgramFilesFolder]Plex\Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'LaunchTarget' to value '[InstallFolder]\Plex Media Server.exe'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058.log'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe'
[0184:1960][2014-04-10T13:10:58]i052: Condition '((VersionNT >= v5.1) AND (ServicePackLevel >= 3)) OR ((VersionNT >= v5.2) AND (ServicePackLevel >= 2)) OR (VersionNT >= v6.0)' evaluates to true.
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleName' to value 'Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i100: Detect begin, 1 packages
[0184:1960][2014-04-10T13:10:58]i101: Detected package: pms, state: Absent, cached: None
[0184:1960][2014-04-10T13:10:58]i199: Detect complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i200: Plan begin, 1 packages, action: Install
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleRollbackLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms_rollback.log'
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms.log'
[0184:1960][2014-04-10T13:11:02]i201: Planned package: pms, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: Yes, uncache: No, dependency: Register
[0184:1960][2014-04-10T13:11:02]i299: Plan complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i300: Apply begin
[17F4:1200][2014-04-10T13:11:08]i360: Creating a system restore point.
[17F4:1200][2014-04-10T13:11:29]i361: Created a system restore point.
[17F4:1200][2014-04-10T13:11:29]i000: Caching bundle from: 'C:\Users\Michelle\AppData\Local\Temp\{e9921c42-812d-4b39-9c02-612724349e82}\.be\pms.exe' to: 'C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\pms.exe'
[17F4:1200][2014-04-10T13:11:30]i320: Registering bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}, version: 0.9.907.0
[17F4:1618][2014-04-10T13:11:32]i305: Verified acquired payload: pms at path: C:\ProgramData\Package Cache\.unverified\pms, moving to: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi.
[17F4:1200][2014-04-10T13:11:32]i323: Registering package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, version: 0.9.907, package: pms
[17F4:1200][2014-04-10T13:11:32]i301: Applying execute package: pms, action: Install, path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7" INSTALLLOCATION="C:\Program
Files (x86)\Plex\Plex Media Server"'
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to install MSI package.
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[0184:1960][2014-04-10T13:13:26]i319: Applied execute package: pms, result: 0x80070643, restart: None
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[17F4:1200][2014-04-10T13:13:26]i318: Skipped rollback of package: pms, action: Uninstall, already: Absent
[0184:1960][2014-04-10T13:13:26]i319: Applied rollback package: pms, result: 0x0, restart: None
[17F4:1200][2014-04-10T13:13:26]i329: Removed package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, package: pms
[17F4:1200][2014-04-10T13:13:26]i351: Removing cached package: pms, from path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\
[17F4:1200][2014-04-10T13:13:26]i330: Removed bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}
[17F4:1200][2014-04-10T13:13:26]i352: Removing cached bundle: {e9921c42-812d-4b39-9c02-612724349e82}, from path: C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\
[0184:1960][2014-04-10T13:13:26]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No

Hi,
Make sure you have turned on Windows Firewall:
1. Click the Start button. In the search box, type Windows Firewall, and then, in the list of results, click
Windows Firewall.
2. In the navigation pane, click Turn Windows Firewall on or off.
3. For each group of settings shown, select Turn on Windows Firewall, and then click
OK.
After that, download and install again. If the issue still persists, try to run
sfc /scannow command to repair the system for test:
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833
Karen Hu
TechNet Community Support

W500 not starting - HELP - unable to locate BIOS ROM; Fatal error during GPU init

hi gurus,
Following problem:
when i start W500 (ubuntu) it stays with the black screen, not even displaying initial ThinkPad message, where you might press the ThinkVantage blue button, to go to BIOS. It just stays black and does nothing.
Than I press Power button for a few seconds to shut it down and try again. Still black screen.
The same procedure again and again and sometimes W500 boots up, sometimes wants to go to recovery mode, sometimes not.
Sometimes, after the black screen it displays the message:
Invalid ROM contents
ERROR Unable to locate BIOS ROM
Fatal error during GPU init
Anyone had the same problems?
What are the possible checks i might execute, to check up W500?
cheers
lenowiow

Update: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.

CS6 Blu-Ray multi-page menus- No preview possible?!?!

I'm fairly confident of the answer here, but just want to make sure that this is Encore CS6's "fault" rather than mine...
Is there really no way to preview/test multi-page menus in CS6 Blu-Ray projects?
Thanks in advance!
- Jim 8^}

You can add multipage menus to your Blu-ray projects. But the preview of Blu-ray features (Multipage menu, pop up menu etc) is not available in Encore as of now. But you can navigate to all the menu pages in the menu editor.
Use these Next and Previous buttons to navigate to the different pages of the menu.
-Ramesh.

Emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293

I am using win 10 home insider preview, build 10074. When I am trying to install VS 2015 community RC, selected Universal Windows App, it failed at
emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293
VS file version is 14.0.5596.25192

Hello EL_1980,
The error -2147023293 translated to Hex is:FFFFFFFF80070643
0x80070643 is a general error here so it is hard for us to troubleshoot. Please try download the ISO format of Visual Studio 2015 Community so that you can use the fciv.exe tool to verify the hash value. All info are listed on the VS2015 download page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2015-downloads-vs.aspx
Please click first "Visual Studio 2015" tap below image.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fatal error during deployment!

I'm getting the following error message whenever I try to deploy my (server-side)
app:
Internal VM (14:41:29): Fatal error during deployment! Deployment failed
Any ideas on how to resolve this?

Seems like problem in setup in Visual Cafe. See the message
Dir/File 'C:\WebGain\VCafe\bin\components\wqaplugin.jar'
does not exist
Can you try other tools for deployment like ant task wldeploy or directly using
command line Weblogic.Deployer?
"Fred Bloggs" <[email protected]> wrote:
>
I click the "Project" menu item, then "Build Application". No problem
doing that,
then I click "Project" again, then "Deploy". The attempt to deploy fails:
VisualCafe (09:45:40): wjc -sysclasspath C:\WebGain\VCafe\bin\..\JDK13\JRE\LIB\RT.JAR;C:\WebGain\VCafe\bin\..\JDK13\LIB\TOOLS.JAR
-g -O -d C:\WebGain\VCafe\Projects\ -classpath
VisualCafe (09:45:40): S:\general\superjar\superjar.jar;C:\WebGain\VCafe\Projects\;C:\WebGain\VCafe\jdk13\jre\lib\rt.jar;C:\WebGain\VCafe\jdk13\lib\tools.jar;C:\WebGain\VCafe\jdk13\lib\dt.jar;C:\WebGain\VCafe\jdk13\jre\lib\i
VisualCafe (09:45:40): 18n.jar;C:\WebGain\VCafe\JAVA\LIB\;C:\WebGain\VCafe\JAVA\LIB\SYMCLASS.ZIP;C:\WebGain\VCafe\JAVA\LIB\CLASSES.ZIP;C:\WebGain\VCafe\swing-1.1\SWINGALL.JAR;C:\WebGain\VCafe\bin\xutil.ZIP;C:\WebGain\VCafe\b
VisualCafe (09:45:40): in\components\sfc.jar;C:\WebGain\VCafe\bin\components\symbeans.jar;C:\WebGain\VCafe\java\lib\eradtools.jar;C:\WebGain\VCafe\java\lib\eradpublic.jar;C:\WebGain\VCafe\java\lib\dbaw.zip;C:\WebGain\VCafe\b
VisualCafe (09:45:40): in\components\dbaw_awt.jar;C:\WebGain\VCafe\bin\components\databind.jar;C:\WebGain\VCafe\java\lib\collections.zip;C:\WebGain\VCafe\java\lib\icebrowserbean.jar;C:\WebGain\VCafe\java\lib\servlet.jar;C:\W
VisualCafe (09:45:40): ebGain\VCafe\java\lib\webserver.jar;C:\WebGain\VCafe\java\lib\jspengine.jar;C:\WebGain\VCafe\java\lib\symtools.jar;C:\WebGain\VCafe\bin\components\deploy.jar;C:\WebGain\VCafe\bin\components\templates.j
VisualCafe (09:45:40): ar;C:\WebGain\VCafe\bin\components\vcservlet.jar;C:\WebGain\VCafe\bin\components\vcjsp.jar;C:\WebGain\VCafe\bin\components\flexlm.zip;C:\WebGain\VCafe\bin\components\vcejbwl.jar;C:\WebGain\VCafe\java\l
VisualCafe (09:45:40): ib\javax_ejb.zip;C:\WebGain\VCafe\java\lib\jndi.jar;C:\WebGain\VCafe\java\lib\jts.zip;C:\WebGain\VCafe\java\lib\jdbc2_0-stdext.jar;C:\WebGain\VCafe\bin\sb\;C:\WebGain\VCafe\bin\sb\classes\sb.jar;C:\Web
VisualCafe (09:45:40): Gain\VCafe\bin\components\wqaplugin.jar;C:\WebGain\QAnalyzer\lib\mrt.jar;C:\WebGain\QAnalyzer\lib\metamata.jar;C:\WebGain\VCafe\bin\components\TurboXMLPlugin.jar;C:\WebGain\VCafe\bin\components\Dreamwe
VisualCafe (09:45:40): averPlugin.jar;c:\jaxp-1.2_01\dom.jar;c:\jaxp-1.2_01\jaxp-api.jar;c:\jaxp-1.2_01\sax.jar;c:\jaxp-1.2_01\xalan.jar;c:\jaxp-1.2_01\xercesImpl.jar;c:\jaxp-1.2_01\xsltc.jar;c:\WebGain\bea\wlserver6.1sp1\sa
VisualCafe (09:45:40): mples\eval\cloudscape\lib\cloudscape.jar -make
-cdb incidentAlertPrj.cdb
C:\WebGain\VCafe\Projects\incidentAlert.java C:\WebGain\VCafe\Projects\appRoles.java
VisualCafe (09:45:40): C:\WebGain\VCafe\Projects\abstractAlertSDFBean.java
C:\WebGain\VCafe\Projects\sdfTextBean.java
C:\WebGain\VCafe\Projects\alertXMLBean.java C:\WebGain\VCafe\Projects\alertSDFBeanFactory.java
VisualCafe (09:45:40): C:\WebGain\VCafe\Projects\nullAlertSDFBean.java
VisualCafe (09:45:40): Warning 61: Dir/File 'C:\WebGain\VCafe\bin\components\wqaplugin.jar'
does not exist
VisualCafe (09:45:40): Build Successful
Internal VM (09:45:46): Starting deployment to WebLogic Server 6.1 ...
Internal VM (09:46:07): Building deployment descriptor...Building generic
WAR
file...
Internal VM (09:46:07): Fatal error during deployment! Deployment failed
Rob Woollen <[email protected]> wrote:
I think we'll need some more info. That doesn't look like a WLS error
message.
Can you show us your logs, stdout etc?
How are you deploying the app?
-- Rob

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Encore CS6 Blu-Ray "fatal error" during build

Similar Messages

Maybe you are looking for