Encore CS6 crashes when importing from Premiere Pro CS6

When sending a project to Encore as a Dynamic Link from Premiere Pro, Encore hangs then a message pops up that it has stopped responding then closes. How do we get this to work?
The computer has an Intel Core i7 processor, 16GB of RAM and is running Windows 7 Pro x64 with Service Pack 1. Adobe CS6 Master Collection is installed. The computer is joined to a Windows Server 2012 domain and the user of the machine has local administrator rights.
The Adobe suite has been uninstalled and re-installed multiple times without success. Sometimes after re-installing, sending a Dynamic Link to Encore will import as expected once, but then after restarting the computer, the problem will occur again. This has been tried with and without installing any Adobe updates. The system has also been wiped and had Windows and all software clean installed on it again which has not resolved the problem.

More below... may not help, but does say that the programs are not designed to work on a network, and may not
Some? versions of Premiere do not work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

Similar Messages

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

Hi there
My source files in Premiere Pro are 1920 x 1080.
When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
In Encore project area I have these two entries
The encoding settings for the above two entries are
this (for the first entry above)...
and this (for the second entry above)...
It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
How can I fix this? What am I doing wrong?

DVD is 720x576 you cannot change that.
If you want 1920x1080 which is HD you need to make a BluRay.
You can however make an AVCHD disk which is HD on DVD.
About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

Input video appears stretched when imported to Premiere Pro CS6

I'm on a beginner level on Premiere Pro so please be gentle if this question is very basic. I'm trying to make a video that preserves the input video resolution exactly. My input video was an MP4 movie with resolution 1440 x 1080. It's an iPad screen recording using X-Mirage software. When I opened it normally in quicktime, it didn't seem stretched. However, when I imported the clip into Premiere, the clip appeared stretched. I checked the Properties of the clip and it turned out to have Pixel Aspect Ratio of 1.3333, which meant the pixels were stretched. My output sequence was also stretched out because of this, even though the output indicated that the resolution is the same: 1440 x 1080. I tried to comply with "Clip Mismatch Warning" and the result was still a stretched version. Please help!

Hi,
In premiere pro, you will see sequence on the top. Click on sequence and from the drop down select sequence settings. Under sequence settings there would be a tab of pixel aspect ratio. Try and change it to d1/dv ntsc widescreen 16:9 or hd anamorphic.
Check if it makes any difference.
Thank You
Arjun

Error when exporting from premiere pro CS6

I have been using PP CS6 since launch date- and have had none stop problems with exporting, I cant dynamic link, add to render ques or simply export straight from PP!
When i Que my project it will export up until half way and then freeze, i've tried changing the clip, removing effects, everything!
has anyone encounted this problem before?
This is happening with more then just this one project aswell.
These are old projects that were originally created in CS5, could that be causing it?

Thats what i thought!
All earlier projects open, i can edit, manipulate it! do the works! However when it comes to export time! i can't export it to anything! whats the point?!?!
Im really angry, when you pay for something you expect it to do what it was designed to do! and the fact i can't export at all is really really frustrating!

Audio not transferring to Encore from Premiere Pro CS6

I'm trying to export a sequence through the Adobe Dynamic Link from Premiere Pro CS6 to Encore and the audio is not transferring with video. The video is 30 minutes long with multiple video and audio tracks. The video came through fine, but no audio track. However, I also brought a timeline into the project that was less than 3 minutes and the audio track came with it. Any suggestions/help much appreciated! Thank you!

Yes--that is correct. Audio track in Premiere but no audio track present in Encore. I believe the audio format in Premiere is Stereo. It is HD footage shot on a C-100 camera. The sound was recorded into the camera and all brought in together. I did end up doing the work around that was suggested and just exported an MPEG2-DVD and pulled the audio in manually. But, would love to try to figure out how to make it work directly using Adobe Dynamic Link. Any suggestions are greatly appreciated!

Captured video using Premiere Pro CC on MAC, wont import when moved to Premiere Pro CS6

Using a Captured video on Premiere Pro CC on my Macbook air, my video wont import when moved to Premiere Pro CS6 when i try to edit it on a pc (Windows 7)
When I try to import the file into CS6 it says *error while decompressing file*
If anyone has any idea what could have happened or what I might have done wrong please reply.
Joseph

mojo,
Do you have QuickTime and the associated codecs installed in your PC?
Thanks,
Kevin

What is THE best video file format to import into Premiere Pro CS6?

What is THE best video file format to import into Premiere Pro CS6? I am tired of the guess work of "this might work if you do this." Just tell me which is, flat out, the easiest for Premiere to read?? I generally animate in Adobe Flash, and some times with a Live camera. Premiere seems to pick and choose which video file it wants. I import from the File drop down box in the upper left hand corner, then move the video file to timeline. Under the "scrubber" there is a thin red, (or when rendered) a green line. The videos I put in the timeline show a thin yellow line which means Premiere is confused. So, in basic terms, which video format is MOST commonly accepted with the least amount of trouble/hassle?

Premiere has a function now where you can import a clip and drag onto a timeline and it will prompt you with a message about changing the timeline settings to match your clip, (or if there is no timeline it will automatically create one that matches your clip.) This is in CC of course so you might consider upgrading. They have fixed a lot of compatibility issues from CS6 to now. If you don't want to get all of CC for 60/month then you can at least shell out 20/month on premiere. It's worth it. They've made it where you don't have to worry about 99% of all video formats. They just work.

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Phantom Flex footage dark when imported to Premiere Pro

Hi everyone (and hopefully Adobe Staff, also),
I am aware this has been posted before, though from what I can see no one, Adobe Staff or users, have found a solution. I am hoping we can change that!
I recently directed a Music video that was shot on the Phantom Flex. Everything went smoothly and after dropping the 3TB of footage via Seance (program by gluetools for Mac) I am now faced with a problem. While all the footage looks fine in Seance and on the Finder; when imported to Premiere Pro (CC v8.1, Caravan (latest update currently) it goes very dark, blue and flat. Premiere Pro is interpreting the colour/luma of the footage wrong.
Adobe states that Premiere Pro supports Phantom Flex .cine files but it seems that while you can edit with them, the colour/luma is interpreted incorrectly. Many other people also seem to have this problem.
These images below are all screenshots from Macbook Pros, one with ‘Glue Tools Phantom Cine Flex 4K’ installed (the gear house’s laptop) and one without (mine).
I need to find a way to get Premiere Pro to interpret the colour/luma properly in Premiere Pro to edit the project, it seems the Glue Tools plugin is not the solution I was hoping for, as some people have suggested elsewhere.
Is there a way to fix this within Premiere Pro or a plugin etc?
Has anyone successfully edited Phantom Flex footage in Premiere Pro?
Any help would be extremely helpful as I am really stuck here.
Thankyou so much.
Here is an example with some footage shot by the crew before me (still left on one of the cards), as you can see it is not just my footage that isn't working in Premiere Pro.
Thankyou,
Jack

It looks to me like Seance (and Finder) are applying a LUT to the footage, whereas PP is showing you the flat image as it was actually recorded, which is normally the desired result. Was there a LUT applied in the camera viewfinder or on-set monitor, something you might also apply in PP?

Grading over a transition imported from Premiere Pro

Anyone out there have a simple, fast and relaible way to deal with grading over a cross dissolve imported from Premiere Pro?
How do you (can you) dissolve from one grading layer to another over the transiton clip? I have been having no luck at all with the dissolve feature in SpeedGrade.
If anyone from Adobe is out there listing, SpeedGrade needs a drag and drop cross dissolve effect / tool like Premiere.
Working on longer pieces with multiple cross dissolves - SpeedGrade almost becomes useless!
When can we expect a proper upgrade to SpeedGrade that will bring it in line with Premiere and After Effects?
Cheers.

Unless you turned on proofing, that would have no effect whatsoever.
It sounds like the root problem is that color managed applications are having problems displaying the color you expect - which means that you expect something unrealistic, or that your display profile doesn't match your actual display.

QuickTime 10.1 Screen Recordings Blurry Once Imported into Premiere Pro CS6

I am doing screen recordings with QuickTime 10.1 that appear to be of good quality until I import into Premiere Pro CS6 and then they display and export very poorly and very blurry to the point that you can't read the text on the page. Any suggestions to fix this problem?

Hi Kristine,
Make sure that the clips are positioned on the X,Y axis as whole integers, not integers + decimal points. See if that works for you.
Thanks,
Kevin

Dreamweaver cs6 crashes when switching from design to live view

dreamweaver cs6 crashes when switching from design to live view

read my reply
Date: Thu, 30 May 2013 20:27:49 -0700
From: [email protected]
To: [email protected]
Subject: dreamweaver cs6 crashes when switching from design to live view
    Re: dreamweaver cs6 crashes when switching from design to live view
    created by Preran in Dreamweaver - View the full discussion
Hi,
Can you try the solutions mentioned in this document?
http://helpx.adobe.com/dreamweaver/kb/crash-live-view-dreamweaver-cs5. html
Thanks,
Preran
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5367198#5367198
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5367198#5367198
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5367198#5367198. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Arbitrary data param not importing from Premiere Pro project into After Effects.

Hi,
I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
PF_Arbitrary_NEW_FUNC
PF_Arbitrary_DISPOSE_FUNC
PF_Arbitrary_COPY_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLATTEN_FUNC
PF_Arbitrary_UNFLATTEN_FUNC
PF_Arbitrary_INTERP_FUNC
PF_Arbitrary_COMPARE_FUNC
PF_Arbitrary_PRINT_SIZE_FUNC
PF_Arbitrary_PRINT_FUNC
PF_Arbitrary_SCAN_FUNC
The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
Thanks.

Some kind of answer would be awesome... there are Adobe staff members on here right?

Encore CS6 crashes when importing from Premiere Pro CS6

Similar Messages

Maybe you are looking for