Encore CS6 Freezes in Preview Mode when using Remote Control buttons

This appears to be one of many issues with ECS6 and I've seen them all from the library problem on out. I authored a DVD in ECS6 (with latest updates as of an hour ago) and all went without error. I discovered two things:
1. Music was missing from the main menu video, but was there in the submenu video and there in preview.
2. Remote could not navigate buttons on submenu.
This led me to use the "remote control" buttons instead of the mouse to try and debug this and this is rather consistently crashing Encore. So not only have I not resolved the music or button navigation problem in my finished DVD but I've discovered a rather repeatable crash.
Anyone seen this? The buttons I chose have bounding boxes which are crazy big relative to the visible area of the button and I can't make them smaller. As a result they overlap (but don't turn red). didn't know if that was part of the remote navigation issue.
I'm using:
1. ECS6 (with latest patches)
2. Resource library from ECS5.1 because the forums seem to indicate that the library issue is not resolved.
Hard to believe the resource files would make a difference but there it is.

For the music missing part -
  Did you link the Audio of Menu as in the below screenshot .If you have not then the audio will be missing
Also. for the crasher in navigating button, please post a screenshot to better understand your problem
-Shuchi

Similar Messages

  • AE CS6: rendering RAM-Preview stops when using other app parallel

    sometimes rendering the RAM-Preview takes some time.
    while waiting I would like at least to read some articles on the internet.
    But as soon as I click into an other windows, AE stops rendering.
    is there a special setting / workaround to avoid this (user-unfriendly behavior) ?

    well, some of the information was given some replies above:
    AE 11.0.3.6
    Windows 8
    Machine: Intel i7-3930, 32GB Ram, 2TB SSD, AMD Radeon HD 7970M
    it happens with really any project
    yes, I am familiar with speeding up the rendering... still takes alot of time and at least browsing the internet should be possible while AE renders the ram-previews...

  • IPhoto 6 Unable to Zoom in Full Screen Mode when using projector

    When in full screen mode in iPhoto 6 I am able to zoom quite nicely but when I attach a projector I lose the slide for zooming. How do I zoom in full screen mode when using a projector?
    Mac Book   Mac OS X (10.4.9)  

    ParkerT
    Given that the zoom works normally, this is not an iPhoto issue. The problem lies in the interaction between your MacBook and the Projector. You might have more luck posting on the MacBook forum
    Regards
    TD

  • Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

    Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

    Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
    # Close Firefox
    # Start the Finder and open the Applications folder
    # Right click or control-click the Firefox.app icon
    # Select "Get Info"
    # Select or Deselect "Open in 32-bit mode"
    # Close the "Firefox Info" window
    # Restart Firefox

  • Keynote on Mac freezes on play mode when a shape has action effect

    Hello.
    Keynote freezes on play mode when a shape has action effect, and the only way to get out is rebooting my Mac!, this is so terrible!.
    Keynote 5.3
    Mac OS X 10.8.4

    Is there chance that the screen saver might be the problem?
    To answer the question:
    I bought Keynote about two weeks ago through the Apple Store, so I'm going to list all apps related to graphics (from recent installed to older):
    EazyDraw 3.5 (old version), not an identified developer.
    Fotor (from the Apple Store)
    XQuartz (X11)
    Inkscape
    DivX Plus Player
    Flip Player
    Microsoft Silverlight
    Join.me
    TeamViewer
    Microsoft Remote Desktop Connection
    Snagit (from the Apple Store)
    VMware Fusion

  • Printing to a Printer Connected to TIme Machine when using Remote Desktop

    Hi,
    I am having trouble printing to a printer connected to our wireless network via Time Capsule when I am on my remote desktop connection. Printing from all other programs work. I downloaded Bonjour on our Windows based server, and it did not detect any printers. When I am connected directly to the printer, I can print when using remote desktop. Any suggestions are much appreciated.
    Thanks!
    Mac OS X (10.5.4)

    Airport Extreme/Express do emulate Jetdirect/port 9100 printing, but that isn't what they use for printing from OS X. OS X and the Bonjour/airport software use USB port redirection, a unique and separate method.
    If the HP driver supports any protocol over ethernet, it would be appletalk. Does that router server use appletalk?

  • RMBP reaches 104C when using remote desktop.  Is this normal?

    I have a new rMBP that is reaching temps of 104C when using remote desktop or other moderately intensive applications.  Is this normal?

    No, that's way too hot. It's only a few degrees below automatic thermal shutdown.

  • When using the share button in safari, I get a no service message. Where do I correct this?

    when using the share button in safari, I get a no service message. Where do I correct this?

    Follow the instructions in this article released by Apple.
    http://support.apple.com/kb/HT6545?viewlocale=en_US
    Best.

  • How to do not insert the message content in the Message Inbox when use MFMessageComposeViewController control

    Dear all.
    In my app use the MFMessageComposeViewController control to send SMS message.The message content will be inserted to Message Inbox of iPhone.
    How to do not insert the message content in the Message Inbox when use this control?Because my message content has been encrypted. I don't want user can see them.
    Thanks

    I can't remember the steps, but if i'm not wrong, there are many "next" to click, and at the last windows, there is one dialog box with "do not show this message again".Maybe something to do with the registry, to enable to view this dialog box again. Date: Thu, 2 Feb 2012 06:38:24 -0700
    From: [email protected]
    To: [email protected]
    Subject: How to enable  the option "do not show this message again" in dreamweaver cs5
        Re: How to enable  the option "do not show this message again" in dreamweaver cs5
        created by Murray ACP in Dreamweaver - View the full discussion
    So, you open Site manager, click New, and then what?  I'm trying to understand which dialog you dismissed.  Can you help me?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4180872#4180872
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4180872#4180872. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Apple TV3 turns off and on when using remote, already reset and restarted.

    Apple TV just started acting up yesterday.  When using remote, light on Apple TV would turn off and on so it would somewhat work when the light was on and would not when light when off.  When light is off and in a menu selection, cursor would just move to the end of the list and stop.  Already restored back to factory and reset it.  Difficult to program after reset when remote only works part of the time when the light goes on so stuck in out of the box condition.  Any help on this?  Thanks!

    Hello stiktani,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV remote issues:
    Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Parallel use remote control and touch panel.

    Hi.
    Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
    Thank's.    

    Hi
    No. When a codec is paired with a Touch controller it is not possible to use the remote control.
    You question number 677 in link bellow
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
    br Oleksandr

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • How to I enable IR on Mac with Mountain Lion.  Would like to use remote control

    How to I enable IR on Mac with Mountain Lion.  Would like to use remote control to flip slides on powerpoint.

    It's enabled by default unless you've previously disabled it:

  • Encore CS6 freezes when trying to open projects

    Hi,
    We are working with Premiere CC 2014 and for DVD authoring we use Encore CS6. Now, whenever I try to open a project or import a file, Encore freezes in and I have to force quit it. Already uninstalled and made a new installation, erased the Preferences - but to no avail.
    I am working on a MacBook Pro, intel Core i7, 8GB, with OS X Yosemite.
    What could be the reason?
    Any advice would be very much appreciated.

    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
    -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html
    Mac Yosemite and Encore https://forums.adobe.com/thread/1635427
    -and https://forums.adobe.com/thread/1321191

  • How do I get CS6 to not distort color when using Lion and printing from Epson R2880?

    Ever since I up-graded to CS5 , the color has been distorted.  It is not an Epson Lion problem because printing from preview or iPhoto the color is perfect.
    Adobe has known about this problem since January 23, 2012.  Their help people have taken over my computer for hours at a time and not been able to discover the source of the problem
    I thought they might have fixed it with CS6 but no luck  I chose use CS4 settings because CS4 had worked.
    I printed using Printer Manages Color and color matching, epson color.  I selected the correct media.  The prints came out dark.  The yellows turned green and the greens turned blue/green, reds became dull and blues a bit dark.
    This is most upsetting because I cannot afford to buy a new printer and ink.  Also I should not have to buy new equipment because Adobe cannot make their product work correctly.

    cmszinnia wrote:
    If the printer prints colors accurately from Lion apps,which it does, then the problem is in Adobe.
    Uh...ok...then the REST of the FREE world is going down the tubes because obviously, Adobe has screwed up?
    Some of us are using LR4 and CS6 to print and getting accurate and excellent results with Lion (10.7.3) so the question begging for an answer is why can't you?
    Read very carefully what Chris wrote...the odds are REAL GOOD you are NOT using the correct settings...but since you don't bother to show or explain the EXACT settings you are using when printing, we'll never know. Will we?
    If the vast magority of the user base is NOT having an issue, to what do you attribute the disconnect? User Error is the single most likely result...
    You want help? Or do you want to argue?
    I know a little bit about printing and I seem to be able to print with zero issues on a wide variety of Epson printers...you wanna place blame or do you wanna learn how to fix the problem? (clue, the odds are it isn't Adobe nor Epson leading to the problems, it's you bud).

Maybe you are looking for