ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

Similar Messages

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

ERRORS found during the burning process #-34506...any idea what this means?

ERRORS found during the burning process #-34506...any idea what this means?
This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
thanks in advance
Jeremiah

First I'd be certain that I had changed the preferences from best quality to best performance.
Did you follow the chapter rules?
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
You may have already done this, but
Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
:)Sue

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

Here's a free non-Adobe solution as well. It's definitely got a steep learning curve compared to Encore, but from my understanding so far, it may also be more capable. (And it's still being developed, unlike Encore which is dead software.)
Easy BD Authoring, Blu-ray Authoring and Reauthoring | DVDLogic Software

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Burning to Blu Ray disc (25GB)

Hi,
I'm not understanding some of my searches on this.
I am trying to burn files from Arpeture and iPhoto....they both are around 80 GB and I have 24GB discs.
However when I try to burn to the disc the first time (with 24GB of data) it stated a warning: Too large to fit on disc. Remove some files and try again.
I did that and it still gave me the same warning. I tried on a few of my computers and I received the same warning. I'm using a External ODD&HDD device to burn.
What am I doing wrong?
Thanks for your help.
G

I used Virtual CD to emulate BD burner and burned to iso image. I burned the iso with Imgburn at 4x on same brand BD disc and its all good. Used Premiere's same session to burn directly on a TDK rewritable BD disc and it went smooth. Both discs can be read by Windows. This time I disabled anti-virus on next Windows startup. I also disabled firewall, stopped Windows automatic update and Windows automatic maintenance. Sometime they do thrash the hard drive and cause failure when burning disc. Those two discs that had failed were I guess due to buffer issue as I got few "waiting for buffer to recover message.." in Imgburn and also maybe it was burning way faster than the disc could handle. I saw it burning whole 18 GB in just under 15 minutes for a 6x disc. My latest burning to BD discs have no issues reading by Windows.
Windows did see the blu-ray burner when I had issues with first two discs and I burned on DVD disc as well for same project. It could play dvd fine but I had problem with those two discs only.
The only thing is I am yet to test the menus with blu-ray discs. I download Powerdvd and WinDVD trial version but Powerdvd gives black screen and WinDVD won't start after the splash screen nothing happens and it disappears. I tested with Leawo and it does show the main menu with background music but the virtual remote doesn't work. I will try on someone else's computer or PS4 to test the menus. I think it should be fine with menus.
Thanks

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

How I can burn a Blu ray disc in my mac?

Hello,
I´m worried cause I don´t know how burn a Bluy ray
But before, how can I do the menus?
nickeditor

You cannot use DVD SP to burn a Blu-Ray disc. But you can use the latest version of FCP to create Blu-Ray discs. There is a tutorial here;
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html

ENCORE CS6 gives error message during the burning of Blu-ray Disc

Similar Messages

Maybe you are looking for