Encore CS6 Menu Templates (From Cloud)

The predesigned menu sets and assets in Encore are not visible. The only set showing in the dropdown is "General" but there are no assets associated with it.

I had DL & installed the trial version (before CC was available) and when CC became available, then Encore went to subscription status and the "continue trial" splash screen went away (as one would expect). During the install, there were no options to include/not include the content library. I have checked the Prefs and under "Media" in points to C:\Program Files\Adobe|Adobe Encore CS6\Library. When I looked at that location, the "Library" folder is missing. I also checked the Encore forum and saw that someone else has asked the question over there and got this reply from an Adobe employee...
Adobe Employee
May 11, 2012 9:18 AM
Report
Hi,
The complete Encore Functional Content will be available in a few days through a separate download.
Regards,
Neeraj Gupta
Guess we'll just have to wait on it.
Thanks for your reply.

Similar Messages

Help Me with Encore CS6 Menu and buttons

Hi I need help with Encore CS6 Menu's. I have a Premiere CSs 6 video which is 3 hours long and 21 chapters. It looks like I can get 18 of the buttons to work. I also want to set up a exit button. Is there a 18 button limit to a menu? Should I be looking at using menu index's or play lists?
Thanks in advance for your help.
Ed

I assume you have a single video on one timeline, and you have chapter markers for your chapters.
A button (e.g. "play movie") links to the timeline (default is chapter one, which is what you want). The end action of the timeline is "last menu."
Commonly, a second button on the main menu goes to a chapters menu. Each chapter menu has links back to the main menu and to the next and previous chapter menus.
For EACH chapter, you create a chapter playlist with that one chapter in it. The end action of the chapter play list is "return to last menu."
There are no end actions on chapters and no overrides anywhere in the project using this method.

How can I transfer some or all Disc Menu templates from PrE7 to PrE9

I have seen various versions of peopIe swapping templates from one program to another, but didn't see my scenario covered. I have both Premiere Elements 7 and Premiere Elements 9 and I like the Disc Menu templates better from PrE7 better than PrE9. I am not needing to copy any text or Instant Movie stuff at this point in time. Is there a simple way to copy/paste some or all of the Disc Menu Templates from the 7 folder to the 9 folder?

Bill and Neale,
Had to try these theories we were talking about. Things went wonky when I created the PrE7 complete folder and inserted in PrE9. The PrE7 folder showed up in the disc menu dropdown list, but when I clicked on it I only got blank menu boxes. So back into windows explorer and deleted the folder I created (2.44 GB worth of menus) and just copied one folder over. From Entertainment, the Drive In Disc menu. That one shows up, seemingly correctly, in PrE9 Entertainment folder. I am enclosing a pic of folders side by side, and you can see how many more menus are in PrE7, just in Entertainment.
You can see the Drive In menu in both folders, in both programs. I haven't outputted anything with the menu yet. Hopefully it works. So, maybe just moving whatever menus a person likes from one program to another, instead of the complete 2.44 GB will work. But one more question comes up. I notice some of the folders have an (A) in front, or an (AV) or (V). I clicked into some of the other folders ie: General, Happy Birthday,Holidays and Events, and some folders they aren't used at all, and other folders are various combinations of one or all. Anybody know what they mean?
Also of note. The menu tree in PrE7 goes directly from DVD Templates to the menu folders. The menu tree in PrE9 has the menu folders in a common folder. Anybody see the reasoning of this?
Thanks again

Encore CS5.1 menu library cleared when Encore CS6 menu library installed

When I installed the Encore functional content (menu libs...) from the CS6 disk the menu libs were installed in Encore CS6 -and- the menu libraries were removed from Encore CS5.1. The menu libraries are not a separate load on Encore CS5.1. If this is expected how do I recover the lost menus?
Ed B

The solution to this issue would be - copy the cs6 library from C:\Program Files\Adobe\Adobe Encore CS6\Library and place it at another loacation and rename it.
Now uninstall the CS6 Content and reinstall the 5.1 FC using the disc or the downloded FC you have. In this way you will recover back your 5.1 FC and can also use the 6.0 FC by pointing Encore to its location. I tried it and this works
And this problem will no longer be faced once the downloadble version of CS6 FC will be available.
see thread -http://forums.adobe.com/thread/1002454?tstart=0

Encore CS6 Menu

Why is it that my menus for blu-ray are being encoded with mpeg 2 and not h.264, and my settings are in h.264. I thought Adobe fixed this.

Here are 7 pics of a simple blu-ray I made from Encore CS6 Ramesh with the programs that are telling the menu is in MPEG-2 and not in H.264:
This is with tsMuxerGUI:
This is with BDFix:
This is with BDedit:
This is with The KMPlayer:
This is with CLIPINF Editor:

Trying to edit on Encores provided Menu templates. Error message PhotoShop File-1 and Sorry, Abnormal Condition has been Detected

I've had Encore CS5 for 1 1/2 years and have only used it twice. This third time, I started getting an error message when I try to edit on one of the menu templates provided by Encore. First message is PhotoShop File-1 and then "Sorry, Abnormal Condition has been detected. You have one chance to save your work (use a different file name to save it under)
I don't own PhotoShop and have only JUST NOW installed an elements version. I use a MAC with OS X 10.9.5. I have never had a virus or any other issues using Adobe products, including my Premiere CS5. Even when I bring in my own menu artwork, I still receive the same error messages. I tried updating Encore. I am at a loss.@

One of the first issues we saw here with Mavericks. Appeared to be more of an issue with Encore 5.0 and 5.1 than 6. But I believed users found a way to fix this. We did not get enough reports back.
Google Encore Mavericks
Some users reports the following fixes their problems:
http://forums.adobe.com/message/6109315#6109315

Moving menu template from premiere elements 4 to premiere elements 9

Last year I upgraded from premiere elements 4 to 9. I could not find a generic menu template in premiere elements 9 so I moved one from the program files of premiere elements 4 to the program files of premiere elements 9. This seemed to work okay except that the background art that I used for the main menu does not show up on the burned DVD even though it is there when viewing the project. I'm using a PC with Windows 7. Any suggestions would be greatly appreciated.

Several of the menu templates for PRE9 had problems, such as custom backgrounds ignored. A. T. Romano did a lot of work on investigating these issues.
For example:
Premiere Elements 9 Disc Menu (main/scene)
PE9 Menu background
It seems likely that whatever caused the faults in PRE9 is also tripping up with your PRE4 template. Others have reported that the problems were fixed in PRE10.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Encore CS6 Dynamic Link from Pr CS6 Problem/Issue

I switched from Production Premium CS5 to CS6. I first deactivated and uninstalled my CS5 then installed CS6 on my Windows 7 machine.
The problem:
When I edit together a video in Premiere CS6 and have finished, I use Dynamic Link from within Encore CS6 to bring in that timeline. After that, I use AME to transcode that Dynamic Link asset to the DVD MPEG standard, Encore CS6 keeps poping up a notification window that says: "The transcoded DynamicLink asset _______ has changed on the server. Would you like to reimport it? Yes/No" It prompts me each time I enter Encore and any time I move from another open program back to Encore.
And I have to click No for each timeline that I have used Dynamic Link for (which is usually 5 or so).
Any ideas or help? This is incredibly annoying.
Thank you.
Jared

As an update. I am using the newest version of PluralEyes (v 2.0.5 7358) to sync the audio of the multiple camera event films I have shot. I have since created a new project in Premiere and only manually lined up clips and then Dynamically Linked that to a new Encore project and so far Encore has not promtpted me with the error/message: "The transcoded DynamicLink asset _______ has changed on the server. Would you like to reimport it? Yes/No"
Any ideas? This is very frustrating. Thank you!

Is Encore CS6 available in Creative Cloud?

I'm using creative cloud on Windows 8. Previously I worked with the creative cloud on a friends Mac and we had Encore as part of the package. However, I'm not finding it now and I need it for burning DVDs for Clients. Please advise!

http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

Why is Encore CS6 Menu quality so poor/bad?

Hello All,
My client and I are frustrated on the image quality of the menu in Encore when creating a Standard Definition DVD.
The menu source is a .psd. Tried various resolutions and once the dvd is ceated the image is very pixellated and hard to read the text in the logos (see attachment). Also tried making a motion menu with that image by creating a timeline with it in P Pro. Same results.
I understand that this is SD and that the customer is playing back the 720 x 480 image on a high resolution monitor which doesn't help.
The videos portions of the DVD are OK (mpg2) and the graphics hold up a lot better in the video portions.
Would appreciate any advice on this issue as my client and I are very frustrated.
I will try and test this on another system today.
What do you think about a hardware/software (something other than Encore) solution to create a decent looking DVD?
Thanks in advance,
John
This is a full frame screen shot from the DVD.

When you bring a higher than DVD resolution image into Encore, Encore downrezzes it to the project setting when you render the menu and/or build the project.
You can only avoid that if you make the background image the correct size. You can only avoid Encore rendering if you don't add any other elements other than highlights (the layers in photoshop with =1, =2 etc.).
If any of the images are part of a highlight layer, you get big problems; I don't think that is an issue for you.
Logos have often been scaled in various ways; I wonder if that could be having an effect.
But, I did not think the image looked that bad once it had it set to the DVD pixel size and was viewing it at the size.
You certainly do not get an accurate test viewing as your client was on a large computer monitor.
Create a test disk and view on an HD TV with an upscaling player. For me that is the modern, practical test.
The other test you might do is to take the logos out of the equation by making a menu with several fonts/sizes to simulate the text issue in the menu. DVD and small text are just not a winning combination. The logos may be scaled too small for so many on one screen.

Exporting a custom menu template from DVD Studio Pro

So I recently developed a custom template in DVDSP that my company wants to use on all our DVDs. Is there any way to export or share this template with my coworkers, or am I stuck with DVD duty?

Ah, after posting this, I found a solution here: https://discussions.apple.com/message/12420982#12420982
The instructions are slightly off: you look in User>Library>Application Support>Final Cut Studio>DVD Studio Pro>Templates and there you go.

Can I use Premiere Elements templates for Encore CS6

LIke the title says.... can I use menu templates from Premiere Elements for Encore CS6? If so, does it matter what version of PRE?
I've seen some templates on the web (e.g. muvipix) but don't know if I could use them in Encore.
I saw somebody asked a similar question for CS4, didn't know what, if anything, had changed...
ETA: Just FYI, I downloaded the Encore CS6 Functional Content and installed it, but honestly I'm not sure if it added any templates or what.... :)

Also, I have to say, for stuff on that's so valuable, Adobe has made the page very hard to find and made the instructions as clear as mud.
First, I'm still not clear on what the difference is between "Functional Content" and "Resource Central Library Content".
Second, as far as I can tell, I never had the problem being addressed by the page (i.e. "When you access the Library panel in Adobe Encore, the panel contains no content."). My library panel always had content, just not a lot of it.
My problem would more accurately be described as "When you access the Library panel in Adobe Encore, the panel contains surprisingly little content.". So the mother lode of content I was looking for was buried as an "Additional Solution" for a problem I didn't have.
And lastly, the Functional Content is some oddly double-zipped self-extracting affair, and the "Resource Central Content is a more straight-forward compressed file, but unlike the Functional Content, it's a .7z file so you have to download a 7-zip compatible decompression tool.
It's awesome that Adobe has that content, so I hate to complain, but it's not so awesome how hard it is find and install.

OSStatus Error = -35 while trying to 'Edit menu in Photoshop' using Encore CS6

While trying to edit my Encore CS6 menu in Photoshop I keep getting 'OSStatus Error = -35'. I contacted Adobe Support via chat and it was suggested that I add Photoshop CS6 to my computer since I use Photoshop CC. I added CS6 to my computer and I am still getting the same message. I don't see an option to tell Encore to use Photoshop CS6 instead of CC.
I am using Mac Pro (Late 2013) running Yosemite 10.10.2. I have a full Adobe Cloud membership. Not sure what other information might be pertinent here. I would greatly appreciate any help/support I can get in regards to this issue.
I've tried to use iDVD to create my menus, purely out of frustration and found that there are issues with it as well. I see that these authoring programs are not being supported or updated any longer by Adobe or Apple. I have purchased Wondershare Video Creator Ultimate to burn my dvd's but the menu options are limited at best. My goal is to create a simple custom DVD menu that looks professional using my own graphics.

This is a Mac operating system error, and not one that we see often. It is probably a reflection of permissions issues, not what version of PS you do or do not have.
Yosemite is not supported for Encore, but neither was Mavericks. Many of the issues in Mavericks appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

PS3 (Playstation 3) issue not loading BDR Bluray | Adobe Encore CS6

I recently created a Bluray using Adobe Encore CS6, and the Bluray is not loading on my PS3, but is working fine on my other player (LG, Toshiba and PC). Does anyone have the same issue and found a solution? I need help on this as most of my client use their PS3 as Bluray player.
Authoring program: Adobe Encore CS6 with the Creative Cloud latest update
PS3 with latest firmware update (PS+ member with auto-update: on)
Video files: 1920x1080 FPS 23.976 Program Stream MPEG-2 for Bluray *.m2v (transcode with FCP Compressor)
Audio files: Dolby Digital Audio *.ac3
Burner software: CyberLink Power2Go V6
Burner hardware: HP BD Writer bd340i
Media: Verbatim BD-R 25GB 6x Speed
Project size: 20/25GB
The project setting in CS6 is: Blu-ray NTSC with MPEG-2 Codec at 1920x1080 at 23.976FPS
The “Check Project” shows no error. I build (output) as an image, then burn the *.ISO file using CyberLink Power2Go.
The BD-R work fine everywhere (LG & Toshiba player) except on my PS3. The BD-R has the BDMV and CERTIFICATE folder, so I don’t know why my PS3 don’t recognize it. And I have three PS3 at home; 1xPS3 80GB version (3yrs old) and 2xPS3 super slim (1yr old). All three are unable to see the BD-R. My PS3 work fine with all other media (games & movie Bluray); and I highly doubt that all three have trouble with the Bluray player.
I did the same process last time (in 2013) and everything is working fine, all the same configuration, except I used Adobe Encore CS4. My PS3 was able to read and recognize the BD-R. But since CS6, my PS3 don’t see the BD-R. I also put back the copy that I did last year with CS4 (just to make sure that is not a PS3 firmware issue) and the Bluray work fine. The media (Verbatim) come from the same tower (leftover from last year).
So everything point toward CS6…is there something that change from CS4 to CS6 for Bluray creation? Jumping from Encore CS4 to CS6, I don’t see anything different, but look like there is, because the Bluray can no longer be played on my PS3. Please help!
Toronto Montreal Wedding Photographer | one-blink Montreal & Toronto Wedding Photographer | one-blink photography

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Editing Encore CS6 Menus in Photoshop CC 2014

Using Encore CS6 in Win7, when I try to edit an Encore menu in Photoshop CC 2014 a message comes up saying that Photoshop is not installed .... even when Photoshop is already running!!
I am familiar with RegEdit and have modifed entries in the Win registry many times in the past.
Is there a way I can get Encore to work with Ps CC version? Or, do I have to go back and re-installed my old Photoshop Elements 11?
Thanks in advance.
Paul

Does the error say it is not installed or that it is "undefined"? Same issue; just curious.
You don't say, so start at square one: when you double click on a psd file in windows explorer, what happens?
That has been the number one fix to this error.
For example: "Edit Menu in Photoshop" not working?
There have been other issues in getting Encore CS6 to work with cloud versions.

Encore CS6 Menu Templates (From Cloud)

Similar Messages

Maybe you are looking for