Encore CS6 missing Menu

Hello,
I recently purchased Adobe Creative Cloud. I want to make a DVD disk using Encore CS6, but the menus are missing. Can you let me know how to get the menu presets installed in the Encore cs6?
Thanks in  advance,

Go to the link below and follow the directions at the top of the page called "Solution: Install the CS6 Functional Content." This installs the primary functional content. It applies to Premiere and Encore. After th is, in Encore, you will have only a small selection of menu templates; no buttons etc.
Warning: when you run this, it will delete the Encore library from CS5. I don't know how it may affect the various Encore directories: CS5/CS5.5. Backup/rename those directories before, so you can replace them if you keep the earlier versions active.
http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
After you do that, go back to that same link and follow the directions at the bottom of the page called "Additional solution: Install the Resource Central library content."
This applies only to Encore, and at the end,  you will have all the buttons, backgrounds, and more full menus.
There are more items than in CS5, so it is better to follow this than just to copy the old library over (although that will get you in business).

Similar Messages

  • Encore CS6 missing Library files

    Hello all freaks.
    I have in recent years been CS5 Production Premium installed and then decided yesterday to upgrade to CS6. I bought, downloaded and installed the Production Premium. I installed also package Adobe Premier Pro CS6 additional ReadMe files plus content (menus, buttons and backgrounds) for Adobe Encore CS6.
    In Encore CS6 it created the groups Corporate, Entertainment, General, Technology, Travel and Wedding, but there appear no menus, buttons or backgrounds when clicked.
    I've looked in the respective folders under Adobe Encore CS6/Library/, but they contain no psd files, only two m2vloc files of about 10-20 kb each.
    When I browse the corresponding folders in my old CS5, there is a large amount of psd files with menus, buttons and backgrounds in these folders, but not in my CS6 installation.
    I hope someone can help me with a solution so I can move on.
    Thank you in advance.
    NB: Although it looks so, I'm not new in the forum, but have been here for the last 10 years. However, Adobe's staff has (at my request) deleted my original profile, as it constantly showed my e-mail address instead of my username/nickname. It did so today again, so I have once again created a new temporary profile until Adobe gets solved the problem.

    http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
    Step 1: Follow the instruction in the top part: "Solution: Install the CS6 Functional Content"
    This will install the basic library. If you have CS5.5 installed, backup your Encore library there; it will be deleted by the install.
    Step 2: Follow the instructions at the bottom of the link above: "Additional solution: Install the Resource Central library content"
    I just noticed that the link about this topic that was present for months at the top of this forum is no longer there.

  • Encore CS6 - Black menu

    Hi there,
    I am currently working on a project which requires me to develop motion menu's on dvd with transisions from menu to menu, but I keep getting black menus instead of the chosen asset as backgrounds for the menus. Here are the elements involved, and what I have tried sofar (The entire project is being composed and authored in CS6):
    Elements involved:
         -PSD menus
         -Rendered assets
         -Dynamically linked files from AE
    Problems I encounter:
         -The intro (first play) for the DVD works perfect
         -In preview mode none of the menus show the desired video asset chosen as background for each menu, but they all show up as black only
         -These assets were rendered out with exactly the same settings as the Intro to the DVD
         -The transisions work perfect (Same video format as intro and menu background assets)
         -On building the project only the main menu is built with the chosen asset as menu background - The other menus still show up black on the final DVD
    Settings & Formats:
         -The main features on the DVD were composed in Premiere CS6 and rendered out via AME (Adobe Media Encoder)
              These were rendered out as 1080p and then down scaled to SD PAL Wide (Mpg), also via AME
              The settings for downscaling were as follows (This is also my default transcoding settings in Encore):
                  - Format: MPEG2-DVD
                  - Video:
                        - Quality: 5
                        - TV Standard: PAL
                        - FPS: 25
                        - Field: Progressive
                        - PAR: 16:9
                        - Bitrate settings:
                             - VBR, 1 Pass
                             - Min BR: 2.5
                             - Target: 6.5
                             - Max BR: 7.2
                        - GOP Settings:
                             - M: 3
                             - N: 15
                        - Maximum Render Quality checked
                  - Audio:
                        - Dolby
                        - 48kHz
                        - BR: 192
                  - Multiplexer:
                        - DVD
                        - Variable
         -The menu motion assets were composed and rendered in AE as QuickTime Animations and downscaled via AME to SD PAL Wide Mpg with exactly the same settings as above
    I have also tried to dynamically link the AE comp as an asset in Encore, but the result remains: A black menu
    Any thoughts on this issue?? Are there any prerequisites for a PS file to be a EN menu?
    Thanks in advance.
    Andrew

    Post your question in the Encore forum.
    Mylenium

  • Encore CS6 popup menu

    I would like to know if there is a way I can create a button on my popup menu to exit my popup menu? I have seen this on other DVDs. Is there a way to accomplish this in encore or maybe bdedit, I would really really appreciate this as I'm at ends on this... Pulling out my hair trying to figure this out any help please...
    Thanks
    Eugene
    [email protected]

    Hello!
    Well, if you're trying to accomplish this with DVD's the answer is no.  Because DVD's have no popup menu support at all.  However, if you are trying this with Blu-rays, the answer is still kind of no.  I say kind of because, generally, on your remote control, if you just press the "popup menu" button again, the menu itself should disappear. 
    If you're wanting to put an actual button on the popup menu that says "exit popup menu" or whatever, that's going to be no, because, currently, Encore doesn't support that action and lacks a programming function that might allow you to implement it.

  • Encore CS6 Menu Templates (From Cloud)

    The predesigned menu sets and assets in Encore are not visible. The only set showing in the dropdown is "General" but there are no assets associated with it.

    I had DL & installed the trial version (before CC was available) and when CC became available, then Encore went to subscription status and the "continue trial" splash screen went away (as one would expect). During the install, there were no options to include/not include the content library. I have checked the Prefs and under "Media" in points to C:\Program Files\Adobe|Adobe Encore CS6\Library. When I looked at that location, the "Library" folder is missing. I also checked the Encore forum and saw that someone else has asked the question over there and got this reply from an Adobe employee...
    Adobe Employee
    May 11, 2012 9:18 AM
    Report
    Hi,
    The complete Encore Functional Content will be available in a few days through a separate download.
    Regards,
    Neeraj Gupta
    Guess we'll just have to wait on it.
    Thanks for your reply.

  • I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    Hi,
    first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
    first i edited my video in premier cc
    sequence 1280X720, 59,94 fps
    48000hz - stereo
    the i linked it with dynamik link to after, make some color correction, etc etc etc
    i renderd in quicktime animation
    my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
    i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

  • How to make a blank menu in Adobe Encore CS6?

    When i create a 'new menu' in Adobe Encore CS6 it automatically turns into a 'party menu'. This didn't used to happen. Its only just started.

    I think "new menu" creates a new menu using the default - chnage your default to the blank menu.

  • OSStatus Error = -35 while trying to 'Edit menu in Photoshop' using Encore CS6

    While trying to edit my Encore CS6 menu in Photoshop I keep getting 'OSStatus Error = -35'. I contacted Adobe Support via chat and it was suggested that I add Photoshop CS6 to my computer since I use Photoshop CC.  I added CS6 to my computer and I am still getting the same message. I don't see an option to tell Encore to use Photoshop CS6 instead of CC.
    I am using Mac Pro (Late 2013) running Yosemite 10.10.2. I have a full Adobe Cloud membership. Not sure what other information might be pertinent here. I would greatly appreciate any help/support I can get in regards to this issue. 
    I've tried to use iDVD to create my menus, purely out of frustration and found that there are issues with it as well. I see that these authoring programs are not being supported or updated any longer by Adobe or Apple. I have purchased Wondershare Video Creator Ultimate to burn my dvd's but the menu options are limited at best.  My goal is to create a simple custom DVD menu that looks professional using my own graphics. 

    This is a Mac operating system error, and not one that we see often. It is probably a reflection of permissions issues, not what version of PS you do or do not have.
    Yosemite is not supported for Encore, but neither was Mavericks. Many of the issues in Mavericks appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
    Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
    http://forums.adobe.com/message/6109315#6109315
    And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
    Monahan re Premiere permissions
    http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
    Kopriva re permissions and AE primarily:
    http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  • Adobe Encore CS6 : écran noir en fin de boucle de menu

    Bonjour,
    Dans les menus (disques blu-ray créés avec Adobe Encore CS6) j'obtiens en fin de boucle de sous-menus, un écran noir et le dernier bouton sélectionné apparaît surligné.
    Selon le support d'Adobe (support aujourd'hui inaccessible par e-mail) le problème, connu depuis 2010 et toujours pas corrigé, serait dû  au "verrouillage" du fond de menu, verrouillage qu'il suffirait de faire sauter avec Photoshop.
    Problème : cela ne fonctionne pas ou bien j'ai fait une erreur.
    La seule solution que j'ai trouvée : ne plus utiliser Encore CS6 et passer à un logiciel concurrent (DVD Architect ou DVD Studio ou Pinnacle 17 qui accepte les sorties de Media Encoder CC)
    Dommage qu'Adobe semble abandonner ses très nombreux clients utilisateurs d'Encore depuis le rachat de Sonic Corp (Encore est basé sur une licence Sonic) par Rovi Corp.
    Les raisons officielles pour l'arrêt du développement d'Encore CS6 sont la disparition des médias physiques. Belle foutaise pour masquer une dure réalité : Adobe est piégé par Rovi Corp. et ne veut pas investir, y compris dans la correction des bugs d'Encore.

    Bonjour Jacout, Dévérouiller un fond de menu avec photoshop n'est pas pas compliqué , tu n'as donc certainement pas fait d'erreur.  Si tu veux que quelqu'un regarde ton fichier .psd, je veux bien le faire. Ceci dit , je n'ai jamais cru la version d'Adobe concernant l'abandon d'Encore suite à une possible disparition des médias physiques. Je partage tes regrets et je suis même un peu indigné de voir Adobe "demander" à ses clients d'aller voir ailleurs alorsqu'ils ont choisi une suite Adobe  en partie à cause de l'intégration de tous les logiciels nécessaires à leur Job ou Hobby y compris Encore.  C'est un peu comme si Mercédes proposait demain une modèle en disant à ses clients pour les sièges des passagers adressez vous à la concurrencence. Andres

  • Encore CS6: I have to click under a button for it to work. Button/Menu Problems

    I have created a menu with adobe encore cs6 and photoshop. everything seems to be in the right place but when i preview the menu, some buttons are the way i made them but others i have to click below the image for it to work. I do not know what other information you will need.

    From Encore, right click the menu and "edit in Photoshop." Look at each button group and make sure that every layer is positioned correctly.
    If that doesn't show you the problem, in Encore in the menu viewer, click the "show routing" button. Then give us a screenshot. (That is the simplest way I know to show the bounding boxes of all the buttons.)
    Let us know if you get it sorted!

  • Encore cs6 has no menu library

    I have Adobe Pr and CS6 Encore and am attempting to create a DVD with menus from my Pr movie project, however I cannot find any preset menu elements in Encore. I would think that I would not have to purchase another app (Photoshop) for this one to work. Any help?
    Thanks!

    You may not have the entire library of object elements "loaded". For some reason, there's an additional library of things you need to download past the program itself, then expand & move into a particular folder. I suggest you read the rather long piece about this by Adobe proper ...
    Adobe Encore download/installation article:
    https://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
    Neil

  • Encore CS5.1 menu library cleared when Encore CS6 menu library installed

    When I installed the Encore functional content (menu libs...) from the CS6 disk the menu libs were installed in Encore CS6 -and- the menu libraries were removed from Encore CS5.1. The menu libraries are not a separate load on Encore CS5.1. If this is expected how do I recover the lost menus?
    Ed B

    The solution to this issue would be - copy the cs6 library from C:\Program Files\Adobe\Adobe Encore CS6\Library and place it at another loacation and rename it.
    Now uninstall the CS6 Content and reinstall the 5.1 FC using the disc or the downloded FC you have. In this way you will recover back your 5.1 FC and can also use the 6.0 FC by pointing Encore to its location. I tried it and this works
    And this problem will no longer be faced once the downloadble version of CS6 FC will be available.
    see thread -http://forums.adobe.com/thread/1002454?tstart=0

  • Help Me with Encore CS6 Menu and buttons

    Hi I need help with Encore CS6 Menu's.  I have a Premiere CSs 6 video which is 3 hours long and 21 chapters.  It looks like I can get 18 of the buttons to work.  I also want to set up a exit button.  Is there a 18 button limit to a menu?  Should I be looking at using menu index's or play lists?
    Thanks in advance for your help.
    Ed

    I assume you have a single video on one timeline, and you have chapter markers for your chapters.
    A button (e.g. "play movie") links to the timeline (default is chapter one, which is what you want). The end action of the timeline is "last menu."
    Commonly, a second button on the main menu goes to a chapters menu. Each chapter menu has links back to the main menu and to the next and previous chapter menus.
    For EACH chapter, you create a chapter playlist with that one chapter in it. The end action of the chapter play list is "return to last menu."
    There are no end actions on chapters and no overrides anywhere in the project using this method.

  • Encore CS6 Skipping the Menu?

    Hello,
         I'm using Encore CS6 (Newest Version) I have finished creating my Blue ray Menus and Timelines. Everything seems to be ok. I have even done multiple "check projects" and nothing pops up. After building my project I attempt to play it in my blue ray player. I have two options in the menu. When it plays, it displays the menu for a quick second, then goes on to the first button without me ever selecting anything. Thoughts?

    Please do not post the same message twice Menu showing for a split second? - especially after waiting for only 2 minutes... this is an open forum, not a direct line to Adobe support, so you need to give people time to read and reply
    I don't do BluRay so can't give any direct help... other than suggesting you post a screen shot of your flow chart

  • Encore CS6 Menu

    Why is it that my menus for blu-ray are being encoded with mpeg 2 and not h.264, and my settings are in h.264. I thought Adobe fixed this.

    Here are 7 pics of a simple blu-ray I made from Encore CS6 Ramesh with the programs that are telling the menu is in MPEG-2 and not in H.264:
    This is with tsMuxerGUI:
    This is with BDFix:
    This is with BDedit:
    This is with The KMPlayer:
    This is with CLIPINF Editor:

Maybe you are looking for

  • Can't get my ipod to connect to itunes

    ok so i updated my ipod touch 3rd generation two days ago and i tried to connect it to my itunes last night. it said i had to update my itunes to the newest version 7.1 so that my ipod could connect if not it just charges and i tried to update my itu

  • Issue when migrating 3.x queries with 2 structures into BI7

    Hi all, We have a 3.x query where we have 2 structures (one in columns and one in rows). The Keyfigure is in 'Filter Values' and in each structure, selections and formulas are defined. The query works fine in 3.x when i try to 'save as' the query in

  • Adobe CS6 Perpetual License - Where can I get this?

    I have been a user of Adobe since CS1.5, I purchased CS5.5 in 2011, and have been using it happily since, recently i have been having problems with CS5.5 and my update to Mavericks OS, so I thought I should buy CS6, problem is at $49.00 per month the

  • Getting data of next 4 months in Webi

    Hello Experts, I have data of next  4 years in my database.  I have created one date object in universe and I have created prompt on this date object. My requirement is as follows : User will enter the date through prompt and my report should pull da

  • AE - Problema cuando copio una composición (o duplico)

    El problema es que cuando copio o duplico una composición, por ejemplo un texto, pasa lo siguiente: - Hago una composición y dentro hay un texto con unos efectos. - Duplico esa composición y edito los efectos. - El resultado es , que los efectos se h