Encore CS6 Trial Won't Launch

I installed the Premiere CS6 Creative Cloud group for trial purposes and when I go to check out Encore, it gives an error msg along the lines of: "Encore will not run in trial mode. Please enter a valid serial number." What's up with that?

Unfortunately, I know of no way to get any form of "trial" of Encore.
Also note, Encore has been dropped from the Adobe lineup, with CC 7.
Many, who had the full-paid version of PrPro CS 6, are now glad that they did.
Good luck, and maybe others will have other ideas for you.
Hunt

Similar Messages

  • Dreamweaver CS6 trial won't launch

    I have tried to launch Dreamweaver CS6 several times. I have installed and reinstalled the trial version but cannot get it to open. I get the little hourglass like it wants to load but that's only for a second and then nothing happens. The installation went fine. There were no problems or error messages. I do not get any error messages either when I try to open it. It is very important I get this program to work because my homework depends on it.
    I am running on Windows XP Professional Service pack 3. My computer is an AMD Sempron 3000+, 2.00 GHZ, 1.93 GB of RAM.
    Is there something I can do to get this program to open? Or perhaps something I may have done wrong?

    Hello,
    I know this is an old post, but I was wondering if there had been any resolution to the problem?
    I have the same issue, and after several of my own tests to find the problem I found that the issue seems to be related to computers running Windows XP PROFESSIONAL.  I tried installing the trial on four different computers, two were running XP Pro, and two were running XP home.  In each case, I used the same DW CS6 install file, and started the installation to install as a trial, and each install went without any problems.  But on the two WinXP Pro machines, the trial failed to initiate at the initial launch (first time start-up by clicking the LAUNCH button from the 'Install complete' screen).  On the two XP HOME machines, the program started fine.
    Unfortunately for me (and apparently for sweetpea too), I need it to run on Windows XP Pro and all my attempts to change the Windows permissions, or create and use a new user account had any affect-- the trial just won't start on the XP Pro computers.  And just to clarify, ALL of the computers were running Service Pack 3.
    It seems to me then it must have something to do with the program allowing permission (as noted in the various help files), but since they haven't seem to fix the problem, they are missing something.  And obviously, I can't try the new CC version (it doesn't work with XP) so I need to find a solution so it will work with XP Pro (my work computer).  I had planned on purchasing it once I was sure it would let me make the changes to my website that I wanted, but I'm not about to buy it now, and then find out it still won't work.
    So I'd appreciate any additional recommendations that anyone might have to help to resolve the issue with a Widows XP Professional computer.
    Cordially...chugbug

  • I try Adobe Encore CS6 trial and it`s a nice app but i try to buy it but I didn`t know how ?

    I try Adobe Encore CS6 trial and it`s a nice app but i try to buy it but I didn`t know how ?

    You may buy Premiere Pro CS6 and the bundled Encore at Creative Suite 6

  • Adobe cs6 illustrator won't launch

    Hi I"m trying to launch my Adobe CS6 Illustrator and it won't launch. It looks like its reading the system fonts and that's where it gets too. I tried deleting preferences doesn't seem to have done anything. All other applications are working fine.

    Suitcase might have a function to check your fonts. But I would suggest you update it first to the most recent version http://www.extensis.com/de/font-management/suitcase-fusion/
    Illustrator doesn't behave well with font management anyway. Let alone dated versions.

  • Encore CS6 Mac won't start

    I'm using Encore CS6 Mac, OS 10.7.3 (Lion).  Suddenly, the program wont start, it just hangs up after the splash screen comes on.  I can't seem to find any preference files to delete for Encore.  Anyone have any ideas?

    I don't know the versions by number, but think this page was prior to Lion?
    In any event, a variety of options.
    Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
    http://kb2.adobe.com/cps/824/cpsid_82414.html
    So previously working okay? That often indicates an update (usually non-adobe) has changed a driver or other os file that is necessary for encore.
    If you find a solution, I would quickly move to a repair install.

  • Adobe cs5.5 trial won't launch

    This is driving me mad!
    I have downloaded the trial version, i'm trying to launch on my mac running 10.7.2, I used to have CS3 but this no longer works with lion!
    Tried to open photoshop for the first time today and it just won't lauch, I am in a neverending loop! I accept the software licence agreement, then it closes and pops up again. How can I open this trial version? Apparently the issue is someting to do with permissions, I am the administrator so can't understand why I wouldn't have full permissions?
    Thanks

    Ahh, Adobe had a theft protection scheme that required you to activate their products on your computer. If you were using it on an older computer, or hard drive, you had to deactivate the software before it would license you to use it on another computer. The problem is you can't readily do that if the old computer is gone.
    It's that something that could be of use?
    If it applies to you, you would have to reinstall it on your older computer and then de-acivate it before installing it on another computer. Adobe started doing this with CS3, it didn't apply to my older CS2 stuff.

  • CS6 programs won't launch.

    I installed the trial version of the Adobe Web and Design CS6.  The installation seemed fine, but when I click on the programs they don't open.  The mouse gets the blue circle icon indicating it's loading, but the program never launches.  I uninstalled, and reinstalled and still have the same issue.  There is no error message either.  I'm using Windows Vista.  Any help is greatly appreciated.
    Thanks,
    Jeff

    My computer has an AMD Sempron processor, and the screen resolution is 1366 x 768.  Let me know if you need anything else.
    OS Name
    Microsoft® Windows Vista™ Home Basic
    Version
    6.0.6002 Service Pack 2 Build 600
    System Model
    Compaq Presario CQ60 Notebook PC
    System Type
    X86-based PC
    Processor
    AMD Sempron(tm) SI-42, 2100 Mhz, 1 Core(s), 1 Logical Processor(s)
    BIOS Version/Date
    Hewlett-Packard F.3C, 5/20/200
    Installed Physical Memory (RAM)
    3.00 GB
    Also, if I don't have have the requirements for the Web and Design CS6 package, is there a way to get the CS5 one still?  I was able to use a trial of Dreamweaver CS5.

  • Adobe Acrobat XI Pro free trial won't launch, claiming no Internet connection

    Hi,
    I wondered if anyone could help me solve this mystery: I am trying to launch the Adobe Acrobat XI Pro free trial. Sign In is required to use the trial. But when I click on "Sign in now", I get the message "Please connect to the Internet and retry". Which is strange, because  my Internet connection is active and stable. The same panel hints that my clock might be at fault (but it is correct). I am running Windows 7, no earlier version of Adobe Acrobat installed. I would greatly appreciate any suggestions you might have on how I can resolve this riddle.
    Thanks in advance,
    Andreas

    Hi SumitV,
    Thank you for answering and suggesting ways to remedy my problem. I tried all the four actions you made me aware of, but although everything seems to be all right, I still cannot launch Acrobat XI in the trial version. The only little hickup came when accessing Adobe's secure site, which prompted this message:
    But when I later checked the certificate, it seemed to be installed and enabled. I am no expert, but it looked like it should according to step 4 under http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html
    Regards,
    Andreas

  • Photoshop CS6 Installer Won't Launch on Mac OS 10.8.2

    I've downloaded the Photoshop CS6 disk image but when I open it and then double-click on the installer to launch that, there is no response.
    I've tried the suggestions in this help document but have had problems with that as well:
    http://helpx.adobe.com/creative-suite/kb/exit-code-15-installing-ccm.html
    The first suggestion in that help doc is no problem -- restarting and running permissions and disk repair. But that doesn't solve my issue.
    Trying the second suggestion, I run into a response different from what is described in the help document.
    After I open Terminal and enter "sh " I then get a prompt which reads "sh-3.2$ "  (Parenthesis marks here are to indicate what I'm typing or the computer's response; I'm not typing parenthesis marks themselves.)
    If I drag Clean Entries.sh onto the terminal window, then the entry is NOT as described in the help document with the path DIRECTLY after "sh ". On my computer it reads: "sh-3.2$ /Users/PFD/Desktop/plist/Clean\ Entries.sh " and if I hit return I get this response in the terminal window:
    mkdir: /Users/PFD/Desktop/temp: File exists
    mkdir: /Users/PFD/Desktop/temp/LaunchAgents: File exists
    WARNING: Improper use of the sudo command could lead to data loss
    or the deletion of important system files. Please double-check your
    typing when using sudo. Type "man sudo" for more information.
    To proceed, enter your password, or type Ctrl-C to abort.
    Password:
    I have Photoshop CS4 already installed and running fine. I moved to a new computer (Macbook Air, now running OS 10.8.2) a month ago via a Time Machine backup; I found at that time that caused problems for re-registering PS CS4. I had to do an uninstall and a clean re-install to get it to allow me to register properly.
    I bought an upgrade to PS CS6 a month ago and haven't had time to try installing it until now.
    Now I'm trying to install but there is no response from the installer, as noted above.
    Any help appreciated.
    thanks,
    Paul D.

    PFDuke it looks like you maybe guessing that you have Exit Code 15 based off the fact that the installer did not launch.  I would recommend reviewing your installation logs to determine the exact error.  You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Trial won't launch and won't uninstall

    I'm working on a Mac, still within the one month trial period. Wanted to move forward to purchase Premiere but can't launch the program (icon just bounces and then stops). Tried to uninstall but the uninstaller says there's an error. Any ideas on how to get it re-installed?
    Thanks!

    Thanks for your replies. I worked with Adobe customer service. They had me run the Cleaner Tool, which solved the Premiere issue (it had to be reinstalled).  HOWEVER this method caused more problems than solutions. The CC Cleaner also completely wiped out earlier versions of Adobe Software on my computer including: Bridge, InDesign, Photoshop, Dreamweaver and others.
    Use the CC Cleaner with care.

  • Encore CS6 project won't open "end of file" error

    Hi everybody,
    Today I was testing taking a Blu-Ray authored project and down-converting to a DVD.  Before doing that work I decided to do a SAVE AS to duplicate the project so as not to screw up the project I had already started.  While doing the SAVE AS Encore hung up and I had to force quit.  Now I'm getting this error when I try to open the original project again:
    "endoffile"
    I can't seem to figure out a way around this.  I really need this project back because of all the time I took reformatting the text subtitles in it!  Does anybody have experience with this project error?
    -JD

    Rule of thumb for Encore is that you are unlikely to recover from a corrupt project.
    If you could figure out what file is the problem, and it was one you could repair, that might work, but what are the chances...?
    That said, see this for windows:
    Troubleshoot damaged projects in Encore on Windows
    http://kb2.adobe.com/cps/406/kb406006.html
    No similar version for Mac, but see this:
    Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
    http://kb2.adobe.com/cps/824/cpsid_82414.html

  • Cs6 illustrator won't launch on my iMac. Can anyone help?

    upgraded to CS6 from CS5. all programmes work fine except illustrator. It quits on start up.

    I have been trying to install for the last 3 days, here's what worked for me:
    I uninstalled Bonjour from my control panel Add/Remove...which then broke my Apple Software Update...repaired that like so:
    http://support.apple.com/kb/TA24326?viewlocale=en_US
    Updated the Apple Software Update from the prompt and proceeded without issues.
    im on xp BTW.
    Good Luck!

  • Lightroom trial won't launch

    Download successful
    Icon appears on desktop
    Double click icon yields two files:
    AdobePhotoshopLightroomPkg
    Ligtroom4 ReadMe.pdf (no answer here)
    How do you launch Lightroom?

    If the installer isn't laujnching, then your system probably doesn't qualify. Since you didn't say anything about what version of OSX and what Mac there's no way to be sure, of course....
    Mylenium

  • Photoshop CS6 won't launch and when it does it's really slow...help?

    Hi,
    So my copy of Photoshop CS6 sometimes won't launch and when it does manage to launch fully, it's really slow. I mean ridiculously slow. The only times when I can get it to run even remotely quick is if I shut down my computer, and then restart it and then start up Photoshop CS6 as the first program. Even then it slows down after a while. (And I only have a firefox browser open usually, never more than a couple of tabs at once, so it's not a bandwidth issue)
    Here are my comp specs:
    Samsung
    Processor:
    AMD A6-3420M APU with
    Radeon (Tm) HD graphics 1.50 ghz
    Installed Memory (RAM) - 4.00 (3.48 usable)
    64 Bit operating System running on Windows 7 home premium, service pack 1
    I also did just recently install the new update Adobe had for Photoshop, so that's up to date.
    It's getting really frustrating! I have another program I'm using in the meantime (Paint tool Sai), but I'd really like to use Photoshop CS6.....
    Any help would be greatly appreciated!

    Make sure you updated the drivers from AMD's website, not Microsoft.
    Make sure you are running the 64 bit version of Photoshop, not 32 bit.
    Disable all third party plugins, and try disabling system utilities (we've seen font managers, antivirus, disk backup software, etc. cause slowdowns due to bugs in those utilities).

  • Dreamweaver CS6 won't launch on Mavericks

    Hello,
    Dreamweaver CS6 won't launch on Mavericks.
    I've tried reinstalling Dreamweaver. I've tried removing Java. I've read the online suggestions.
    But, Dreamweaver CS6 still won't launch. Darn it.
    Any ideas?
    Thanks very much in advance

    Hi all,
    For a list of known issues and the way to troubleshoot issues with DW on Mavericks, see
    http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
    https://helpx.adobe.com/dreamweaver/kb/dreamweaver-unresponsive-mac10_9-appnap.html
    https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
    Thanks,
    Preran

Maybe you are looking for

  • Officejet 8500a false paper jam issue

    Hi any one who can help me, I have a 8500a which is just out of warrenty and is now one big paper weight.  Basically gone through all the steps of cleaning the printer yet it still keeps coming up with the message. So let me take you through what hap

  • Install 3rd party emulator in Java ME SDK 3.0

    Hi! I have just uppgraded from the EA release to 3.0. When I had the EA release I added a number of 3rd party emulators to be able to run my midlet with the 'Run With' command. Now I can't get the emulators installed. I try Tools/Java Platform/Add Pl

  • Drag between two flex applications?

    Hi, In the project I'm working on I display tree which the user can manipulate by dragging and dropping. So far I have a tree in a flex application, and I've implemented dragging and dropping. I'd like the user to be able to drag from one tree to ano

  • My Macbook Pro (early 2011, 15") randomly shuts down after being turned on from sleep mode?

    -So over the past week, I find that my macbook pro will randomly shut down within 1 minute of being turned on from sleep mode. Within the first few days of this, I figured out that it will only happen if I move my mac around before its completely int

  • When to Execute ABST2 program for Fixed Assets?

    Hi, Do we need to execute ABST2 program extractly at the end of the year 31/12/2008 or we can also execute after 31/12/2008?Because for my client-they have executed that program in July-2009.Now it is showing 0.01 differance for one of the depreciati