Encore displays 23.976 time at 24fps, messing with imported subtitle sync
I have just discovered that somehow Encore (and Premiere 6.0 and AE CC 2014) display the timeline of a 23.976fps clip at 24fps, meaning that the clip I have, which has a duration of 1:26:36 in all other windows programs, including subtitle editors, suddenly has a length of 1:26:30:23. Of course my imported subtitles drift apart 6 seconds towards the end of the film, so the placement is completely wrong.
Is there any workaround for this problem?
To answer my own question: converting the subtitles from 23.976 to 24fps fixes the sync issue. It seems "wrong" but at least it works now.
Similar Messages
-
my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help
Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Case: When I go to Tools - Options - Privacy then Location Bar options, there should be another option to where we can disable auto-complete from the Location Bar without messing with other settings. Example #1: I click "Nothing" and then I gotta type in the website I wanna go to every single time. Example #2: I click "History & Bookmarks" and then it auto-completes. Is there any other option just to disable Auto-Complete all together??
Is inline autocomplete enabled?
See:
* http://kb.mozillazine.org/Inline_autocomplete -
How can I display the elapsed time of the course using Advanced Actions in Captivate?
I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions -
Since Time Change, iCal and iPhone Calendar Time Are All Messed Up
Ever since the most recent daylight-savings time change, I noticed all events I created in iCal, when synced with my iPhone, became an hour off. If I edit the event on the iPhone, it stays the correct time on my iPhone, but when it syncs with iCal again, the time on iCal goes off by another hour, even though the time for the event on the iPhone stays correct. (Hopefully that makes sense) Has anyone else experienced this problem? It is incredibly annoying, because now I have no trust in any of my calendar entries as to what the correct time is.
As an example: I created an event for Sunday the 16th on iCal on my Mac for a 1-hour soccer game from 8:00PM - 9:00PM. When I synced my iPhone, I noticed a few days later that the event on my iPhone now said the event was from 9:00PM - 10:00PM...one hour off! I edited the event on my iPhone, and re-synced. Now my iPhone has the correct time (which I manually edited on the phone) but iCal now says the event goes from 7:00PM - 8:00PM. Again, an hour off, but in the reverse direction (an hour off early, rather than late). When I sync now, even though the times on the iPhone and the times on iCal don't match, they do not change...it's as if either the computer or the phone didn't recognize daylight savings time or something, and thinks it has the correct time for the event. Both my Mac and my iPhone's clocks do display the correct time and date, however, so it's not like the system clock is off. It is completely bizarre, and I entered my entire teams schedule this way, so ALL games were off, and now is completely screwed up. Please help.
Message was edited by: Hamster Huey
Message was edited by: Hamster HueyYes, I did. I posted an identical post in the iPhone forum since no one answered here. http://discussions.apple.com/thread.jspa?threadID=1791145&tstart=0
The first reply solved the problem. It involved the Time Zone setting in iCal Advanced preferences for me. -
I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors. -
Lightroom 4.4: Only 3 thumbnails will display at a time in both Grid view and the Film Strip
Hi. I have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
Help, please?
With many thanks,
RitaAlas, it didn't work. I did it twice--the second time rebooting the computer before starting Lightroom. I didn't expect the reboot to make a difference, but I did discover something else in the process: the second time I tried this, I accidentally opened a different catalog--and new photos imported just FINE into that one, thumbnails and all! For one moment I thought the reboot HAD made the difference. However, when I reopened the catalog I actually wanted, the original problem remained. Thumbnails don't load with import, and, when forced, only display up to three at a time.
So the problem seems specific to this catalog.
And yes--thank you for affirming that reinstalling Lightroom wouldn't work, either. (I forgot to mention that's what I had tried first. It didn't help--but it's nice to know it wasn't supposed to.)
Thank you so much for your reply. Do you have any other ideas, please?
With many thanks, truly,
Rita -
I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me! I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error. Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!
I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me! I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error. Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!
-
I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr........... -
I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
KenMUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
marykaymaas wrote:
How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
either Select All and drag to the left (turn on the Lock Automation menuItem if you have any automation curves)
or
use the Cycle Region to export the exact length you wish:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Slider for Display and Control Time of Video
Hey Community,
I run a Video with the IMAQ/ AVI components. Therefor i want to have a timeband as there is one in a normal video player. The Time runs and if I click on the band the video should jump to this moment of the video. Is there a possibility to manage that or do i have to seperate the display of the time and an extra Control to jump to the point of interest?
In the file there is a little example what i mean. (LabView 2010)
Thanks Philipp
Solved!
Go to Solution.
Attachments:
Slider.vi 23 KBHi Philipp,
you could do that by modifying the "Read AVI File Example.vi" (see Screenshot). I also attached the VI saved with "For previous version", I hope that works for you too.
This example uses the "IMAQ AVI2 Read Frame VI" function where you can specify the desired frame. So you only have a control that can modifies the current frame, which is normally incremented every loop iteration.
Best regards,
Christoph
Attachments:
screencapture0.png 84 KB
Read AVI File2.zip 27 KB -
How to display the current time in a UIX page
Hi All,
another UIX question....
A requirement of a customer is to display to current data and time in every page.
It should be done in a <header>. So i'm writing a new (template based) renderer for that element. How can i display the current time and date on it?
Thanks in advance for any help...
Regards,
Robert WillemsHi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy -
Displaying Date and Time in portal desktop
Hi
I have been looking around for any info or guideline to display the <b>date and time</b> in the portal desktop. I could not find anything very helpfull. In visual admin you can swap lastname and firtsname and vice versa. Thou there is nothing about displaying date and time.
Is it possible to display it and how?
Thank you for any information
NamiraWhere u need the time to be displayed.. If it has to be displayed in Masterhead you can programatically display it...
import the par file for Masterhead, change it and replace it..
Its a simple JSP page so that u can change it easliy..
cheers
gEorgE -
ICO file not displaying at run time?
Hello Experts,
I an using fusion 11.1.2.1 32 bit. I have Copied the Icons as well as GIF files in C:\Oracle\Middleware\Oracle_FRHome1\forms\java folder.
At button property i set Iconic to yes
and file = addrow
Icon not display at run time.
but when i set file = abc.GIF
image is displaying at run time.
My doubt is that ICO file not displaying at run time while GIF file are displaying.
Do i need to change configuration ?
Please do the needful.
Thanks
YashHi Yash,
First Try this steps
To resolve this issue, follow these steps:
Double-click My Computer, and then click Options on the View menu.
Verify that the Icon file type appears on the File Types tab. If the Icon file type does not appear in the Registered File Types box, skip to step 10.
Click Icon in the Registered File Types box, and then click Edit.
Verify that the following settings exist, and then click OK:
The Description Of Type box contains Icon.
If there is a Confirm Open After Download check box, it should be selected.
If the settings do not appear exactly as listed in step 4, click Remove, click Yes, and then click OK. If the settings do appear as listed in step 4, skip to step 10.
Click New Type.
In the Description Of Type box, type Icon.
In the Associated Extension box, type ICO.
Click OK, and then click Close.
Use Registry Editor to view theHKEY_CLASSES_ROOT\.icokey, and then verify that the default string contains the following value:icofileIf the .ico key does not exist, create it, and then insert the value listed above. If any other values exist in the .ico key, delete them.
Use Registry Editor to view theHKEY_CLASSES_ROOT\icofilekey, and then verify that the default string contains the following value:iconIf the icofile key does not exist, create it, and then insert the value listed above. If any other values exist, delete them.
Create a new key in the icofile key called DefaultIcon , and type %1 as this key's default value.
Quit Registry Editor, and then restart your computer.
Second Try this
Simple way
Copy your images to:
1
c:\Oracle\Middleware\as_1\forms\java\
Notes:
- Icon files may not be supported.
- In case of a Java security issue when using gif images, you will need to create a jar file and sign it with oracles sign-tool (see below, point 6).
- In case you having trouble with oracle’s sign-tool, do it directly with java’s
Recommended way
1. Create a “icons” folder and place all your gifs in there
i.e. “c:\Oracle\Middleware\as_1\forms\java\<icons>”
2. From within icons folder make a jar file of all the gif images:
1
jar -cvf frmicons.jar *.gif
3. Copy this new jar into “c:\Oracle\Middleware\as_1\forms\java\”
4. Edit/update formsweb.cfg file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg …to update/include:
1
2
3
4
5
6
7
8
9
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin...etc)
archive=frmall.jar,frmicons.jar
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmicons.jar
5. Edit/update Registry.dat file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=icons/
default.icons.iconextension=gif
At this point your icons should work normally, but if you get a security check of Java for gif files then proceed to the next step to fix this. TIP: May need to restart the weblogic/forms server for changes to take effect.
6. Sign your jar file with oracles sign_webutil.bat sign-tool.
path = c:\Oracle\Middleware\asinst_1\bin\sign_webutil.bat
Firstly, you need to edit the sign_webutil.bat as follows:
1
2
3
SET KEYSTORE_PASSWORD=my_password
SET JAR_KEY=webutil2 # will need to change for every run
SET JAR_KEY_PASSWORD=my_password
Secondly, set the environment path and finally run the command:
1
2
3
set path=c:\Oracle\Middleware\as_1\jdk\bin
cd c:\Oracle\Middleware\asinst_1\bin\
sign_webutil c:\Oracle\Middleware\as_1\forms\java\my_icons.jar
This will create your signed jar file. Once initialized from the web-app it should ask the user to “Trust” the certificate and never prompt again.
Other issues you may encounter and may need to edit/update the following files/registry entries as well:
formsweb.cfg
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
1
2
3
4
5
6
7
8
9
10
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin, ...etc)
archive=frmall.jar, my_icons.jar
...or
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar, my_icons.jar
Registry.dat
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
Registry entries:
1
2
UI_ICON:<path_to_icons_dir>
UI_ICON_EXTENSION: "gif": ".gif" "ico": ".ico"
Credits and further information can be tracked for icons issue here and for jar file creation here.
Hope this will help.
Maybe you are looking for
-
Why can I no longer drag a .eps file from finder into a slide to embed the image?
I have always been able to embed a .eps file into a Keynote presentation by dragging the file from Finder onto a slide. This no longer seems to work in Keynote 6.1 in Maverick 10.9.1
-
How to do signature sent from iphone
how to set signature sent from iphone for whats app messages
-
Problem with a Display Only field based on a dynamic LOV
I have a field/item which is based on a dynamic LOV: select DESCRIPTION display_value, STATUSID return_value from CTCXFRREQS_STATUS_LOV order by 1 ...and I need it to be display-only on the page. However, if I make it a display-only field, the return
-
SAVE BAPI Issue in Parallel Processing
Hello Friends, I have used this BAPI 'BAPI_POSRVAPS_SAVEMULTI3' to Save Some Orders in SAP APO. I have given option to run the program both in Normal Mode and Parallel Processing mode.. In Normal mode it is able to save the data with Class Character
-
Error Messages when Checking Database via dbacockpit
Hi, I got the below messages when I tried to exe a "Check Database" job. What could be wrong ? Please advise. TIA ! SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests Message no. BT351 SXPG_STEP_COMMAND_START: SXPG_STEP_X