Encore DVD 2.0 Menüs in Encore CS3

Hallo ihr Lieben,
ich habe gerade eine mittelmäßige Herausforderung mit dem neuen Encore CS3.
Nach Öffnen meines aktuellen, mit En 2.0 erstellten, Projektes musste ich feststellen, dass alle automatisch erstellten Textunterbilder in den Menüs verschoben sind (kein schöner An- und Ausblick bei einem Projekt mit über 60 Menüs.
Deaktivieren und wieder aktivieren der "Textunterbild erstellen"-Option oder des Textes als Button hilft nicht. Bei neu geschriebenen Texten werden die Unterbilder exakt platziert.
Hat jemand einen Tipp oder eine Idee, wie man diesen offensichtlichen Import-Bug beheben kann?
Liebe Grüße
Rayco

Reading the
Encore system requirements
I would say that you can't:
Microsoft® Windows® XP Professional or Home Edition with Service Pack 2

Similar Messages

  • Encore DVD Writing Cancels won't play on DVD player issue

    So I have a very confusing issue with encore.
    When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment)  the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
    I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?! 
    Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and  skips  around as if the DVD is scratched or damaged?
    ! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it.  I used different DVDs and it didn't help.
    I work for a company that needs to copy the DVDs but they can't be copied. Don't know why? 
    Here are my settings
    Mpeg 2-DVD exported from Pr.
    720x480
    Codecs: Mpeg video, Mpeg layer
    Duration: 1:10:26
    Encore DVD transcode status: Don't Transcode
    Encore Project/assets
    2 Menus
    1 Mpeg video
    1 Timeline
    Build
    Format: DVD
    Output: DVD disc
    Source: Create Using current project
    4.7 gb disc
    Has 510mb free
    All regions
    Unlimited copies
    First Play and title button are a menu
    Check build is good.
    I really need help with this weird issue quickly thanks.

    Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
    I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
    I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
    I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v.  It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out. 
    The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
    Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
    So any help is greatly appreciated
    whether it be a specific issue you know of dealing with used Macs and issue similar to mine
    or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated,  I've already burned through about 13 discs and even more pain pills for the headaches!!

  • Exporting to encore dvd with trial version of PPro CS3

    My question:
    Are we supposed to be able to use Encore DVD with the trial version of PPro CS3?
    If so, then what are the proper steps?
    Background:
    i have downloaded a trial version of PPro CS3. I have wanted to check out the Encore DVD maker that now is included with the PPro. However, when i attempt to export a timeline to Encore, the 'export to encore' is not active. In other words, i see the words 'export to encore' but they are faded and thus the link to it is 'dead'.

    Trial does not with any flavor of MPEG due to license restrictions
    You may import-edit-export DV AVI type 2
    Encore is not activated until you pay and convert the demo to real
    Read the FAQ article
    Converting Download Trial to Registered
    (read subject
    How do I convert a trial version to a version for unrestricted use?)

  • Creación de Menús en Encore DVD 2.0

    Buenas!
    ¿hasta cuántos menÚs se pueden crear con el Encore DVD 2. 0? ¿Podrían crearse 3000?
    Muchas gracias.

    EncoreDVD CS2 on Vista is unsupported.
    Some users get lucky, but nothing is guaranteed, and you will not get any support at all (apart from those here who have managed to get it working).
    Your best bet is to upgrade to CS3 - that is Vista 32-bit qualified.

  • Encore DVD 2.0 soll Menüvorschau auf DV-Gerät abspielen können???

    Hallo Leute.
    Wer von Euch hat es bereits geschaft, unter Encore DVD 2.0 die Vorschau eines erstellten Menüs über den DV/Out des Motherboards an ein angeschlossenes DV-Gerät weiterzuleiten, um eine Video- oder Menüvorschau auf einem TV-Gerät anzeigen zu lassen. Laut Handbuch heißt es hierzu nämlich lapidar auf Seite 181 des PDF-Files:
    "So legen Sie Audio/Video Out-Voreinstellungen fest
    Normalerweise wird Video über den Monitor und Audio über die Lautsprecher des Computers ausgegeben. Sie können
    Vorschauanzeigen und/oder andere Ausgaben (z. B. Videos im Monitorfenster) jedoch auch auf einem angeschlossenen
    DV-Gerät abspielen. Legen Sie Audio/Video Out-Voreinstellungen wie folgt fest:
    1 Wählen Sie Bearbeiten > Voreinstellungen > Audio/Video Out.
    2 Wählen Sie eine der folgenden Optionen aus:
    Audio-Ausgabegerät Hiermit geben Sie das Audio-Ausgabegerät an.
    Gerät: Um das Video auf eineman geschlossenen Gerät abzuspielen, wählen Sie das Gerät im Menü Gerät. Falls das Gerät
    nicht im Menü angezeigt wird, prüfen Sie, ob es eingeschaltet ist, und klicken Sie dann auf die Schaltfläche Status prüfen.
    (Diese Einstellung gilt für sämtliche Videos mit Ausnahme von Vorschauen.)
    Menü-Editor auf DV-Hardware anzeigen: Hiermit wird der Menü-Viewer auf dem angeschlossenen DV-Gerät angezeigt."
    Genau dies habe ich probiert. Mein Sony DV-Rekorder wird als Sony-DV-Gerät im sog. VCR-Modus angezeigt. Also erkennt Encore DVD 2.0 schon mal die Hardware. Leider erhalte ich aber nicht das versprochene Bildsignal, dass ich dann über den Rekorder zum Fernseher schicke.
    Mache ich es mir jetzt nur zu einfach oder interpretiere ich das Handbuch falsch, oder hat jemand eine Idee wie diese Funktion sonst zu verstehen ist.
    Laut Matrox, wird eine WYSIWYG-Funktion über die RT100Pro Karte nicht mehr unterstützt, wenn man die neuen Matrox Tools 6153 installiert hat. Ich habe allerdings nur Encore DVD2.0 installiert unter Beibehaltung der alten Matrox-Tools 6122.
    Encore 2.0 läuft super stabil bei mir ohne jede Beanstandung, nur eben diese Funktion will mir nicht gelingen.
    Wer kann helfen?
    Gruß MBLOH

    Hi,
    dann mach den dicht und den Bildschirmschoner und das....
    alles was im Hintergrund lüft könnte stören.
    Gruß Jörg

  • Se puede hacer esto con ENCORE DVD??

    Wuenas,
    ¿¿se podria meter un Mpeg2 grabado en 16:9,
    en un DVD,
    y que tuviera dos botones el DVD,
    y que clikearas en uno y lo Vieras en Widescrreen para
    pantallas de TV panoramicas,
    y el otro boton te hiciera automaticamente el
    Letterbox para TV normales de 4:3???
    Es decir con Encore veo que eso no se puede hacer,
    se podria pero metiendo en el DVD
    dos MPEG2, uno el 16:9 original y el otro reescalado
    con Letterbox con Premiere Pro,
    Parece que con Encore esto no se puede hacer,
    si no se puede conoceis algun programa de
    Autoria que haga eso, pero con un solo
    MPEG2 dentro del DVD
    Muchas Gracias
    Saludos

    No. en el projecto necesitas primero el menú con los 2 botones, dos menus más, y un timeline con el clip (video e imagen)
    Cada botón del primer menú (al que asignas como "set first play"), va a enlazar con uno de los otros menús. A su vez cada uno de estos menús va a enlazar con el clip. lo que cambia es el "aspect ratio" de cada uno de los dos menús. La forma de cambiarlo es en la ventana "properties" del menú seleccionado y clic o en 4:3 o 16:9.
    También encontraras unos menús en blanco con ambos formatos de pantalla en la libreria de menús. busca en "set" como "general".
    El resultado del previo es que arranca el DVD con el menú de dos botones, cada uno de ellos debe llevarte al mismo clip, pero con distinto formato de pantalla. (uno con distorsión)
    Espero que resuelva tu problema.
    Toni

  • (DVD Error -1) Encore DVD 1.5

    Que tal. Tengo tiempo usando Encore DVD 1.5 y de pronto empezó a lanzarme un "DVD Error -1" al momento de mandar el proyecto a folder. Lo raro es que los proyectos exportados previamente (ya hasta quemé en DVD)ahora tampoco puedo exportarlos. En cualquier cosa que deseé exportar en Encore me manda este error, así sea un clip sencillo sin menú ni nada. Pasé el proyecto a mi otra computadora y ahora tampoco en esa puedo exportar nada. Como decía, incluso proyectos anteriores que ya habían sido previamente exportados. Ayuda por favor, no encuentro nada en internet que hable de mi caso. Gracias. Cualquier cosa pueden contactarme a mi correo [email protected] Gracias.

    I'm basically having the same problem, I do know that for me AVI files wont work, so I had to switch over to WMV, but I am having the same problem with the unidentified error while building the project.

  • Encore DVD 1.51 - viele Probleme

    Ich weiss nicht, woran es liegt. Wenn ich ältere Encore-Projekte überarbeite (neue Menüs, andere Videoclips), läuft alles problemlos.
    Jedes neue DVD Projekt, was ich mit Encore 1.51 anlege, läuft grundsätzlich auf dem PC (Win XP) problemlos. Nach dem Brennen der DVD (zum Glück nutze ich DVD+RW bzw DVD-RW) teten beim Abspielen mit dem DVD Player sporadisch immer wieder Fehler auf. Entweder wird der für die "erste Wiedergabe" gekennzeichnete Clip gar nicht abgespielt. Oder ein im Menü gewählter Clip wird nicht wiedergegeben.
    Ich arbeite seit der Version 1.0 mit Encore und kenne die Bedienung nun in- und auswendig. Ich kann mir keinen Reim daraus machen, da auch keinerlei Fehlermeldungen bei der Projektprüfung ausgegeben werden. Hatte es natürlich auch mit beiden vorhandenen Brennern versucht.
    Im aktuellen Fall geht es NUR um drei Videoclips, die getrennt im Menü wiedergegeben werden sollen. Zwei weitere Menüseiten können ebenfalls aus dem Hauptmenü heraus problemlos angewählt werden.
    Ach ja: die Clips sind AVI-Quellen, die mittels Encore in "PAL DV HQ 7 MB VBR" transcodiert wurden.
    Wer weiss da eine Lösung? Wie gschrieben, die Wiedergabe am PC unter Encore läuft problemlos. Die DVD selbt kann am PC auch mit Power-DVD abgespielt werden.
    Gruß
    Peter

    Hi
    Entweder sind die Rohlinge nicht kompatibel mit dem Standaloneplayer, oder der Transcoder von Encore kriegt es nicht hin die Files anständig zu encoden. Hatte ich beides schon.
    Achim Kredelbach

  • 4:3 and 16:9 mix onto one Adobe Encore DVD

    Using Adobe Encore DVD, I have made a 4:3 and 16:9 mix of movie timelines and menus on one DVD.
    Encore previews the mix of 4:3 and 16:9 movies/menus in the one project correctly.
    The dvd disc I made plays 4:3 and letterbox 16:9 on my 4:3 TV correctly.
    The dvd disc I made plays 4:3 and 16:9 in InterVideo DVD on my computer OK.
    Why when I take the disc to the shop to view on a widescreen monitor does it not show each aspect ratio correctly. I hope it is just a setting there but we tried many settings on the DVD player and on the monitor. When 4:3 played correctly, 16:9 did not and vica versa.
    Is it me or the shop?
    This page was helpful http://www.adobe.com/support/techdocs/329473.html
    Thanks, freddo

    We were just stuggling with this for some time, and eventually discovered that we were not properly using Encore.
    We had two videos:  one as 4:3, the other as 16:9.
    We created a menu, brought the videos into the timeline, linked everything properly, but would not get the expected results.
    We eventually learned that we were supposed to create TWO timelines; one for the 4:3, and one for the 16:9.
    Hope this can save someone some time.

  • Print out of Encore DVD Flowchart

    I'm asking out of pure curiosity's sake.
    Is it possible to get a print out of an Encore DVD flowchart? Obviously one could be made in either Illustrator or Photoshop, but it could be helpful to get a print out of a ready made flowchart.

    Without going the raster-image routes, mentioned above, I know of no direct print function. I will usually do my flowcharts in AI, as I can have so much more control that way, and can even plug in graphics of the Menus, so that the client can see things cleanly, and can sign off on the Project.
    I know that is not as easy as just pushing a button, and generating an 11 x 17 high-rez PDF, which would be great, but I do not know of any other ways.
    Good luck,
    Hunt

  • ERROR open encore dvd cs5

    ESPAÑOL:
    al tratar de iniciar Encore DVD cs5 comienza a cargar y luego de unos segundos me aparece un cartel con el Título Microsoft Visual C++ Runtime Library:
    this application has requested the runtime to terminate it in an unusual way
    y luego de esto el programa se cierra.,..
    uso Windows 7 X64.. por favor cual es la solucion a éste problema
    ENGLISH:
    when  trying to start Encore DVD cs5 starts loading and after a few seconds I  see a poster with the title Microsoft Visual C + + Runtime Library:
    this application has Requested the runtime to terminate it in an unusual way
    and after that the program closes. ..
    Windows 7 use X64 .. please what is the solution to this problem

    That is a Microsoft runtime problem, so search
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • Can't activate my older version of Encore DVD 2.0

    My computer died. Got my computer running and trying to re-install and activate Adobe Encore DVD 2.0 but the activation server is down for that. Adobe doesn't activate ver 2.0 anymore. They want you to upgrade to Encore 6.0. I don't have the money to upgrade and I want to use my ligimate bought copy of Encore DVD 2.0. Followed a thread and found out others got phone calls from the support team with a  authorization code to activate it. The forum said they updated Adobe's internal documentation so that support agents could help others with this same issue. However, I tried to get the same help with no luck. I still want to use my 2.0 version because it works and I don't see a need, nor do I have the money to upgrade. I have a legal ligimate store bought copy. Why should I have to buy another version? If others are being helped with their Encore DVD 2.0, why can't I?

    I suspect that what you were seeing was re Premiere and other CS2 applications.
    Encore was not CS2; just a plain "2" application.
    I cannot find a download of version 2; 1.5 and then it was first bundled with Premiere CS3.
    Call support and see if they'll give you an old version of CS3!

  • Encore DVD  4:3 or 16:9

    Heelo Everyone,
    I need a bit of a help.
    I have a project but not sure what to do.I want to make DVD using Encore DVD.I have Several Video Clips which will be the DVD.
    The problems are:
    1.half of the video clips are 4:3 aspect ratio and the other half 16:9.So do i make a Encore project for 16:9 or for 4:3 ratio.I will be encoding the clips into DVD Mpeg-2 file so i will use Encore DVD only to compile the DVD.I dont know if i insert this files are they are 4:3 ration and 16:9 ratio in 16:9 project settings will that affect my 4:3 videos?I know that Encore has an option that if a widescreen dvd is inserted in 4:3 screen it will envelore the image .I would appreciate your help on this one.
    2.All my videos are Progressive Scan.Do i need to convert them to interlace(because all commercial dvd are interlaced)?Which field should be first?I am in Europe.
    Thank you very much

    The Encore project setting does not set 16:9 vs 4:3. You can mix screen ratios, as long as you do not mix them on the same timeline.
    The letterbox etc settings are generally set by the player, by telling it what your TV is.
    DVDs save as interlaced, but they code it so you can play it as a progressive as long as the player supports it.

  • Link Menu Buttons to Subtitle Track in Encore DVD 2.0?

    I desperately need help with subtitles in DVD 2.0. I did: “Timeline > Add Subtitle Track” on each of my 10 timelines. I added a few subtitle texts to check how it works. So far so good. I created a submenu with “Select Subtitle, etc.” Then I tried to ‘link’ the Subtitle Button on this menu to subtitle track #1 – but it wasn't available in the Subtitle Button’s Properties panel’s Link drop down menu (and the Override drop down menu was grayed out).The Adobe Encore DVD 2.0 Manual says (on p. 222) that “You can set the audio or subtitle track with any link control (such as End Action or Override) in the Properties panel.” This doesn't seem to be the case unless I am doing something wrong (most probably). Also, on the same page, the manual says that “2. Select a button to set … the subtitle track… 3. In the Properties panel, choose Specify Other from the Link pop-up menu.” There is no “Specify Other” selection in the list. (One comment: The subtitle track does not show up in the Project panel – may be this is the problem?) I would appreciate any help. Thanks, Laci.

    HI Bill, I have another subtitle question. I finished my first (big) Encore DVD 2.0 project yesterday (). I build the DVD image but when I tried to burn it to a DVD disk it turned out that the project has about 122 million more bytes than what would fit on the disk (). So, with PE 7, I edited some of the 9 movies in the project (exported them with same name, to the same place as during the first time) and I opened the Encore project.  I noticed that it used the old (imported by Encore) avi files. Then I did something not very smart: deleted the old (and long) avi. files from the project and imported the edited (and shorter) new avi files. At this point, I noticed, that my laboriously created subtitles disappeared  .
    Do these subtitles still exist somewhere? There is a file in the project, called "SpuSplit.ses" in the SubtitleDataFiles folder but I do not know how to open it or if it would help at all. More important: What should I do next time to save the subtitles (or audio for that matter) if I still want to make some (minor) editing on my project after building the DVD?  (I assume that I have to create the subtitles in script files and then import them as many times as I want. Am I right?)
    Thanks for any help, Laci.
    (BTW, I uploaded my picture and it is in 'My Profile' but does not show up with these massages.)

  • "File path not found" when opening an Encore DVD project made 2 years ago

    Configuration:
    XP SP3, Encore DVD CS3 coming from Creative Suite.
    2Gb RAM, fast-enough-CPU, large-enough-harddisk (~70Gb space).
    The project, as I remember, should has been made with Encore DVD 2.0 2 years ago.
    The project file is placed on the C:\ with no invalid characters on the path or filename.
    The message prompts when I try to open the project file and after some loading(1 sec).
    I have been searching on the Internet for these problems on other people but there are no satisfactory solutions yet. Does anyone have the same issue?
    Thanks!

    ummm - I think this must be something like:
    http://www.cs.yorku.ca/java/api/type/api/type/lang/package-summary.html
    right?

Maybe you are looking for