Encore DVD and Group policies....

Has anyone ever had a problem running Encore DVD 2.0 with group policies applied to a machine? Anyone have any info on Encore DVD 2.0 in relation to group policies? I can't get it to run on a machine with group policies enabled....

imoore wrote:
> I'll have to do a bit more testing I think, but it looks as if the new
> agent is the problem - is there an earlier agent still available that
> doesn't have the black screen (WMRUNDLL.EXE) problem that I can
> experiment with to get my group policies back? Or any suggestions for
> getting 7.1.0.4 working correctly?
>
> Cheers,
> Ian
>
I still have the files for SP1, IR1, and IR3aHP1, HP2, and HP3. I can
send you an older one if you want.

Similar Messages

Maximum number of connection profiles and group policies for Cisco ASA

Hi,
We have a Cisco ASA 5520 running 8.0(2) that we use only for Remote Access VPN.
Does anyone know how many connection profiles and group policies that are supported on the box? I have not been able to find this in the manual.
Thanks in advance for your help!
Best regards,
Harry

There is no limit for connection profiles or group policies that can be configured on ASA. However the numbers do depend upon the memory available in the device as the profiles are stored in memory during execution.

Where is the file which stores the users and groups policies?

Hi, as mentioned in the title..i would like to know which file stores the policies of the users and groups which i've defined. And where is this file stored? Thanks.

SteveGrisetti wrote:
Okay if I move this into our Tips & Tricks area for easy reference?
If you're asking me, I have no objections.

Flex and group policies

Hi Guys,
is there a difference between regular flash applet and flex
enabled applets ?
I'm asking because we are on a tight security network and for
some reason flash objects that are done with flex just don't work.
On a windows machine, if I log on with an administrator
account, I can see all flash objects from the page (
http://www.cdmv.com) but if I
connect from a regular user account, I can't. From that regular
account, I can see flash objects on other sites without any
problem.
For testing purposes, I added the regular user to
administrator groups, gave him full access in the isa server, etc
but can't find what's wrong.
It gotta be something in the group policies but I really
don't understand why flash applets run while those made by flex
don't.
We are running flash player 10
Any help would be greatly appreciated as I have tried stuff
for the past 8 hours :(
Regards

That particular item cannot be configured.
Aandi Inston

Adobe and Group policies

Does anyone know if you can use group policies to control settings in Adobe Reader, such as the Save As location?

That particular item cannot be configured.
Aandi Inston

Office 2013 OEM and Group Policies

Has anyone been able to apply group policy to a OEM (or Retail) version of Office 2013.
Particularly I am not able to set the Workgroup Templates Location.
Thank you.

1st, group policy for Office 2013 will apply to all license editions of Office 2013.
2nd, however, there is no such build-in policy for setting the Workgroup Templates Location. To manage the Workgroup Templates Location, we need to add the "SharedTemplates" string under the following registry key (via group policy
or any method you prefer):
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\15.0\Common\General
The workgroup templates location is stored in the
SharedTemplates
string value.
Max Meng
TechNet Community Support
Max that doesn't appear to be the case. We have volume media and click to run installs of Office 2013 and the latter simply do not pick up the Group Policy settings whilst the volume media installs do.

Leopard and encore dvd and flash export big problem

hello, do you know this problem?, with my Macbook pro and MacPro 2008 and CS3 creative suite production premium, I can't make an export to flash, crash and crash.
Leopard 10,5,2
Sorry for the translate, i'm french

Yes, this is a huge problem that was brought up months ago. Adobe has still not provided an update or fix for it. It seems to be a problem between Encore and the Leopard version of Quicktime. (So maybe Adobe and Apple are both just hoping the other one will fix it while we keep getting frustrated!)
See this thread below for more: "Build Flash freezes at transcoding step."

Encore DVD 2.0 and Vista?,.....and Encore CS3 questions

Encore dvd 2.0....are you guys going to continue to support this and make a patch for it to run under Vista? if so where can I find it? Kind of bad to buy a product and the company drops support on it immediately after purchase and it won't run on the operating system....
Also is/will there be and upgrade to encore dvd 2.0?
I know that you have Encore cs3, is that the upgrade to encore 2.0? and will you be selling Encore CS3, separate from Premiere? I need nothing in Premiere and want the Encore dvd and for it to run with Vista. Please have an option to buy just the Encore CS3 without having to buy premiere and stuff that I don't need because if that is the case then I will not be buying Adobe products anymore. I won't be forced to purchase extra software I have no need for in order to get the one program that I want...it is not worth it..easier to change to a different company for that product...just asking...and if you care about your customers, you might at least listen and consider what I have requested..thanks..t

>chances of them selling encore cs3 in the future separate?
Since their entire marketing push seems to be the bundling of the 2 products, I would say "slim to none"
>hurry and buy encore 2.o
The least expensive way to get Encore 3 is to buy Premiere Pro 2 right NOW and get a free upgrade to Pro3+Encore3 when it is released
If you have any previous version of Premiere, you may even buy Pro2 for the upgrade price and receive the free upgrade to the version 3 duo

ASA 5505 VPN Group Policies (RADIUS) and tunnel group

I have a single ASA firewall protecting a small private developing network, and I need it in order to access remotely to two distinct network spaces both of wich are VLAN tagged: 1 is LAN and 3 is management. Each net has its own IP address space and DNS server.
I'd like to set up Anyconnect to land on lan 1, and SSL VPN in order to see the IPMI and management websites sitting on VLAN 3. In order to make things "safer" I have found a free OTP solution, OpenOTP, and I decided to implement it on a virtual machine, setting up a radius bridge to allow user authentication for VPN. I can pass wichever attribute I'd like to using this radius bridge (for example "Class" or "Group-Policy" or whatever is included in the radius dictionaries).
Actually all I need is quite simple. I have to segregate my remote users in 2 groups, one for Anyconnect, and one for SSL based on the radius response from authentication. (I don't need authorization nor accounting) I'm no Cisco Pro, what I've learnt is based on direct "on the field" experience.
I'm using two radius users for testing right now, one is called "kaisaron78" associated to a group policy "RemoteAC" and a second one called "manintra" associated to a group policy called "SSLPolicy". "kaisaron78" after logging in should only see the Anyconnect "deployment portal", while "manintra" should see the webvpn portal populated with the links specified in the URL list "Management_List". However, no matter what I do, I only see the default "clean" webvpn page. This is an example of "sh vpn-sessiondb webvpn" for both users..
Session Type: WebVPN
Username     : kaisaron78             Index        : 1
Public IP    : 172.16.0.3
Protocol     : Clientless
License      : AnyConnect Premium
Encryption   : Clientless: (1)RC4     Hashing      : Clientless: (1)SHA1
Bytes Tx     : 518483                 Bytes Rx     : 37549
Group Policy : RemoteAC               Tunnel Group : DefaultWEBVPNGroup
Login Time   : 10:59:33 CEDT Mon Aug 18 2014
Duration     : 0h:00m:23s
Inactivity   : 0h:00m:00s
VLAN Mapping : N/A                    VLAN         : none
Audt Sess ID : c0a801fa0000100053f1c075
Security Grp : none
Asa5505# sh vpn-sessiondb webvpn
Session Type: WebVPN
Username     : manintra               Index        : 2
Public IP    : 172.16.0.3
Protocol     : Clientless
License      : AnyConnect Premium
Encryption   : Clientless: (1)RC4     Hashing      : Clientless: (1)SHA1
Bytes Tx     : 238914                 Bytes Rx     : 10736
Group Policy : SSLPolicy              Tunnel Group : DefaultWEBVPNGroup
Login Time   : 11:01:02 CEDT Mon Aug 18 2014
Duration     : 0h:00m:05s
Inactivity   : 0h:00m:00s
VLAN Mapping : N/A                    VLAN         : none
Audt Sess ID : c0a801fa0000200053f1c0ce
Security Grp : none
As you can see, it seems like the policies are assigned correctly by radius attribute Group-Policy. However, for example you'll notice no vlan mapping, even if I have declared them explicit in group policies themselves. This is the webvpn section of the CLI script I used to setup remote access.
! ADDRESS POOLS AND NAT
names
ip local pool AnyConnect_Pool 192.168.10.1-192.168.10.20 mask 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_27
subnet 192.168.10.0 255.255.255.224
access-list Split_Tunnel_Anyconnect standard permit 192.168.1.0 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.10.0_27 NETWORK_OBJ_192.168.10.0_27 no-proxy-arp route-lookup
! RADIUS SETUP
aaa-server OpenOTP protocol radius
aaa-server OpenOTP (inside) host 192.168.1.8
key ******
authentication-port 1812
accounting-port 1814
radius-common-pw ******
acl-netmask-convert auto-detect
webvpn
port 10443
enable outside
dtls port 10443
anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
anyconnect profiles AnyConnect_Profile_client_profile disk0:/AnyConnect_Profile_client_profile.xml
anyconnect enable
! LOCAL POLICIES
group-policy SSLPolicy internal
group-policy SSLPolicy attributes
vpn-tunnel-protocol ssl-clientless
vlan 3
dns-server value 10.5.1.5
default-domain value management.local
webvpn
url-list value Management_List
group-policy RemoteAC internal
group-policy RemoteAC attributes
vpn-tunnel-protocol ikev2 ssl-client
vlan 1
address-pools value AnyConnect_Pool
dns-server value 192.168.1.4
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_Anyconnect
default-domain value home.local
webvpn
anyconnect profiles value AnyConnect_Profile_client_profile type user
group-policy SSLLockdown internal
group-policy SSLLockdown attributes
vpn-simultaneous-logins 0
! DEFAULT TUNNEL
tunnel-group DefaultRAGroup general-attributes
authentication-server-group OpenOTP
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group OpenOTP
tunnel-group VPN_Tunnel type remote-access
tunnel-group VPN_Tunnel general-attributes
authentication-server-group OpenOTP
default-group-policy SSLLockdown
!END
I had to set up DefaultWEBVPNGroup and RAGroup that way otherwise I couldn't authenticate using radius (login failed every time). Seems like in ASDM the VPN_Tunnel isn't assigned to AnyConnect nor to Clientless VPN client profiles. Do I have to disable both default tunnel groups and set VPN_Tunnel as default on both connections in ASDM ? I know I'm doing something wrong but I can't see where the problem is. I'm struggling since may the 2nd on this, and I really need to finish setting this up ASAP!!!!
Any help will be more than appreciated.
Cesare Giuliani

Ok, it makes sense.
Last question then I'll try and report any success / failure. In this Cisco webpage, http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/ref_extserver.html#wp1661512 there's a list of supported radius attributes. Actually I'm using number 25 Group-Policy, in order to get the correct group policy assigned to users. I see, in that list an attribute 146 Tunnel-Group-Name. Will it work out for the purpose you explained in the previous post ? I mean, if I set up two tunnel groups instead of 1, 1 for anyconnect with its own alias and its own url, and 1 for SSL VPN again with its own alias and url, do you think that using that attribute will place my users logging in into the correct tunnel group ?
Thank you again for your precious and kind help, and for your patience as well!
Cesare Giuliani

4:3 and 16:9 mix onto one Adobe Encore DVD

Using Adobe Encore DVD, I have made a 4:3 and 16:9 mix of movie timelines and menus on one DVD.
Encore previews the mix of 4:3 and 16:9 movies/menus in the one project correctly.
The dvd disc I made plays 4:3 and letterbox 16:9 on my 4:3 TV correctly.
The dvd disc I made plays 4:3 and 16:9 in InterVideo DVD on my computer OK.
Why when I take the disc to the shop to view on a widescreen monitor does it not show each aspect ratio correctly. I hope it is just a setting there but we tried many settings on the DVD player and on the monitor. When 4:3 played correctly, 16:9 did not and vica versa.
Is it me or the shop?
This page was helpful http://www.adobe.com/support/techdocs/329473.html
Thanks, freddo

We were just stuggling with this for some time, and eventually discovered that we were not properly using Encore.
We had two videos: one as 4:3, the other as 16:9.
We created a menu, brought the videos into the timeline, linked everything properly, but would not get the expected results.
We eventually learned that we were supposed to create TWO timelines; one for the 4:3, and one for the 16:9.
Hope this can save someone some time.

Encore chapter markers off / different when playing DVD and when watching in Preview mode

I'm using CS6 and Encore version 6.0.0
I have a 120 min project with about 17 chapter markers. The markers were set to a older version of the project and then I extended the project by about 5 min and did a Replace Asset in the timeline. I adjusted the markers in the timeline. When I view the project in the Preview mode the chapters markers start at the right place but then I burn to DVD and they are off by about a minute.
I've tried deleting the cache and buring again but it's still off.
I think doing the Replace Asset messed things up but when it plays fine in Preview but not on the DVD something is really wrong.
Thanks

Update: I removed everything from the timeline and started over and entered the chapter markers. They are still off and now it's worse.
I have 21 chapters. 6-10 are off the rest are ok. I am burning to a dual layer DVD but I don't think that would be the reason.
Lastly, the DVD player skips over the final chapter it goes from 20 to the begining of the movie skipping Chapter 21.
What the heck?!

Encore DVD 2.0 and windows 7

I'd like to use my Encore DVD 2.0 with windows 7.
It's seems it is not possible.
So, is it still possible for me tu upgrade Encore DVD 2.0 to a version i can install with windows 7 ?
Thank you for your answer and sorry for my bad english...

http://www.adobe.com/products/encore.html

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Premiere pro 1.5 and Encore DVD 2.0

I have Premiere Pro 1.5 but I like the new features of Encore DVD 2.0. Does any have any problems and/or comments if I upgrade to Encore 2.0, but still use Premiere 1.5. Especially around the areas of compatablity and importing.
Thanks in advance for your advice

Hi Roxanne,
I use Premier Pro 1.5 for all my video editing. I export my video files out of PP 1.5 as Microsoft AVI format into Encore 2.0 for DVD authoring without any compatibility problems. I use Encore 2.0 and it works great for me. Hope this helps.
Good luck,
Don

Problem with Group policies and Administrator count

I have one problem with Group policies and Admnistrator count.
Win XP, Client 4.91, Client Zen 4
I use DLU for users.
the Group policies are well applied and i keep them after logout for
security reasons.
But my problem is, after logout, the Administrator count becomes this
Group policies, and the only technique that I use, is to remove the
repertories c:\windows\system32\GroupPolicy*. Administrator must
loguing again for having good policies.
Can you help me?

Bill,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Encore DVD and Group policies....

Similar Messages

Maybe you are looking for