Encore DVD to Encore CS3

I have a DVD that was created with the Premiere 2.0 and then into Encore DVD. Now I need to make this same DVD into a BluRay. I have the new Encore CS3 but it is not letting me open the file.
Any hope of this working?
I also I cannot open the old Premiere file into CS3. Is there a way around this.
Thanks,
ms

Unless you still have the original, untranscoded AVI files, then forget it. Seriously.
And if you need to make more than a couple of burned copies, forget it.
You cannot replicate Blu Ray created in Encore CS3 - the plants will
i not
accept the discs.

Similar Messages

  • Exporting to encore dvd with trial version of PPro CS3

    My question:
    Are we supposed to be able to use Encore DVD with the trial version of PPro CS3?
    If so, then what are the proper steps?
    Background:
    i have downloaded a trial version of PPro CS3. I have wanted to check out the Encore DVD maker that now is included with the PPro. However, when i attempt to export a timeline to Encore, the 'export to encore' is not active. In other words, i see the words 'export to encore' but they are faded and thus the link to it is 'dead'.

    Trial does not with any flavor of MPEG due to license restrictions
    You may import-edit-export DV AVI type 2
    Encore is not activated until you pay and convert the demo to real
    Read the FAQ article
    Converting Download Trial to Registered
    (read subject
    How do I convert a trial version to a version for unrestricted use?)

  • Encore DVD 2.0 and Vista?,.....and Encore CS3 questions

    Encore dvd 2.0....are you guys going to continue to support this and make a patch for it to run under Vista? if so where can I find it? Kind of bad to buy a product and the company drops support on it immediately after purchase and it won't run on the operating system....
    Also is/will there be and upgrade to encore dvd 2.0?
    I know that you have Encore cs3, is that the upgrade to encore 2.0? and will you be selling Encore CS3, separate from Premiere? I need nothing in Premiere and want the Encore dvd and for it to run with Vista. Please have an option to buy just the Encore CS3 without having to buy premiere and stuff that I don't need because if that is the case then I will not be buying Adobe products anymore. I won't be forced to purchase extra software I have no need for in order to get the one program that I want...it is not worth it..easier to change to a different company for that product...just asking...and if you care about your customers, you might at least listen and consider what I have requested..thanks..t

    >chances of them selling encore cs3 in the future separate?
    Since their entire marketing push seems to be the bundling of the 2 products, I would say "slim to none"
    >hurry and buy encore 2.o
    The least expensive way to get Encore 3 is to buy Premiere Pro 2 right NOW and get a free upgrade to Pro3+Encore3 when it is released
    If you have any previous version of Premiere, you may even buy Pro2 for the upgrade price and receive the free upgrade to the version 3 duo

  • Problems importing .wmv file as an asset to CS3 Encore DVD

    If anyone has any insight, it would be very much appreciated. I tried to find the answer by looking at this forum and google and I haven't been able to find any information. When I import the .wmv file on a mac to Encore DVD CS3, I am getting the following error message"The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help correct the problem."
    Unfortunately this error message doesn't tell me where to look to resolve this. I have filp4mac installed and I am able to view .wmv files. So any insight on how to correct this issue would be very much appreciated. Take care - Julie

    If your asset is very very large (like over two hours long) then Encore might insist on scanning the entire asset before importing it.  You should notice your hard drive light on steadily, or a lot of disk drive activity from Encore using a program like Process Explorer.

  • Encore DVD CS3 Start Message "Runtime Error!"

    I installed the Production Premium Suite CS3 with Encore DVD on Windows XP SP2. Dell Dimension 9200 Intel Core 2 DUO
    at the startscreen of Encore DVD, i got the Runtime Error! Message.
    Solution:
    In my case, the "virtual Daemon Manager" also "Daemon Tool" was the problem.
    I had mounted an iso file, after dismounting the file and close the tool resolved the problem.
    Encore DVD is working now!
    Juergen

    As the first person in the World to have installation issues originally with Encore 1.5 upgrade (for which the well-known Joe Bowden had to get Adobe tech support to write a special bit of code to brute-force some Encore components to register), I was hoping I would not have any issues with their newest tools.
    But I too had a problem with running Encore CS3 - the dreaded Runtime error which has been reported here.
    I am running a Dual dual-core Xeon machine with 8GB RAM, Quadro FX 5500, in Windows XP Pro x64.
    My colleague had got Encore running on his machine without any problems, so it was annoying to find I had this issue.
    We have the same systems, with same software. The only difference is that I have some SCSI hard drives, a SCSI DLT drive, and SCSI CD-RW on top of the DVD writer.
    After patching Encore CS3 and trying some techniques listed elsewhere on these forums to make the software work, in the end I had to go to my Control Panel, and disable the SCSI CD-RW drive.
    As soon as this was done (a silly but not terrible workaround), Encore CS3 would happily load, and sees both my DVD writer and DLT drive just fine.
    Just thought I'd let people know what worked for me....
    Good luck!
    Dom

  • Can't activate my older version of Encore DVD 2.0

    My computer died. Got my computer running and trying to re-install and activate Adobe Encore DVD 2.0 but the activation server is down for that. Adobe doesn't activate ver 2.0 anymore. They want you to upgrade to Encore 6.0. I don't have the money to upgrade and I want to use my ligimate bought copy of Encore DVD 2.0. Followed a thread and found out others got phone calls from the support team with a  authorization code to activate it. The forum said they updated Adobe's internal documentation so that support agents could help others with this same issue. However, I tried to get the same help with no luck. I still want to use my 2.0 version because it works and I don't see a need, nor do I have the money to upgrade. I have a legal ligimate store bought copy. Why should I have to buy another version? If others are being helped with their Encore DVD 2.0, why can't I?

    I suspect that what you were seeing was re Premiere and other CS2 applications.
    Encore was not CS2; just a plain "2" application.
    I cannot find a download of version 2; 1.5 and then it was first bundled with Premiere CS3.
    Call support and see if they'll give you an old version of CS3!

  • "File path not found" when opening an Encore DVD project made 2 years ago

    Configuration:
    XP SP3, Encore DVD CS3 coming from Creative Suite.
    2Gb RAM, fast-enough-CPU, large-enough-harddisk (~70Gb space).
    The project, as I remember, should has been made with Encore DVD 2.0 2 years ago.
    The project file is placed on the C:\ with no invalid characters on the path or filename.
    The message prompts when I try to open the project file and after some loading(1 sec).
    I have been searching on the Internet for these problems on other people but there are no satisfactory solutions yet. Does anyone have the same issue?
    Thanks!

    ummm - I think this must be something like:
    http://www.cs.yorku.ca/java/api/type/api/type/lang/package-summary.html
    right?

  • Creación de Menús en Encore DVD 2.0

    Buenas!
    ¿hasta cuántos menÚs se pueden crear con el Encore DVD 2. 0? ¿Podrían crearse 3000?
    Muchas gracias.

    EncoreDVD CS2 on Vista is unsupported.
    Some users get lucky, but nothing is guaranteed, and you will not get any support at all (apart from those here who have managed to get it working).
    Your best bet is to upgrade to CS3 - that is Vista 32-bit qualified.

  • Problema encore dvd 2.0

    hola que tal, estoy haciendo un slideshow en encore dvd 2.0, ya lo cree, cambie el menu desde ps, inserte las fotos, sonido, todo perfecto, el proyecto ni tiene errores segun el reporte, el problema es cuando quiero grabarlo en una unidad de cd-rom, hace todo, y al final no me graba el proyecto en el CD, segun lei puedo grabar los proyectos en el cd, no hace falta que sea DVD, como puedo hacer para que me grabe los proyectos en cd?
    atte,
    seba

    >chances of them selling encore cs3 in the future separate?
    Since their entire marketing push seems to be the bundling of the 2 products, I would say "slim to none"
    >hurry and buy encore 2.o
    The least expensive way to get Encore 3 is to buy Premiere Pro 2 right NOW and get a free upgrade to Pro3+Encore3 when it is released
    If you have any previous version of Premiere, you may even buy Pro2 for the upgrade price and receive the free upgrade to the version 3 duo

  • Encore DVD 2.0 "Timeline has a (Hpgc) error at 00:00:00:00

    System: Win XP, 1GB RAM etc. I've used Encore DVD 2 for 3 years, never had this error message:
    "Timeline has an error at 00:00:00:00.
    PGC Error - PGC Info - name= (Name of Timeline) ref= Hpgc, time= 00:00:00:00"
    Check project was initially fine. I rebuilt entire project, same error. But Checking project, this time round, said it was an AUDIO error.
    Transcoding all works, then the error appears at the Start of the actual build.
    Help, I have 30 orders for this DVD, and nothing to show!
    Raymond
    New Zealand

    @Stanley,
    Thank you for some more input on the PGC Error mess, like the "H" being a designator.
    @Raymond,
    John's rec. for G-Spot is a good one. I use this about every week, and sometimes on many files in a day - depending on what client's load onto my desk. This little freeware program will do many things, but probably the most important is to tell you exactly what your AV (Audio/Video) file consists of, which CODECs are used for the Audio and the Video and whether your system has them installed.
    As Stanley points out, MPG is not available (in or out) in the Premiere Trial version. Still, you should be able to File>Export>Movie and select, first Video (only, non-muxed) DV-AVI. Then do this again, but select Audio (only, non-muxed) PCM-WAV. This will give you elemental streams.
    In Encore, Import_As_Timeline, your DV-AVI, and Import_As_Asset, your WAV. Drag your WAV to the Timeline.
    Now, as the trial version does not allow any use of the MPG CODEC (licensing restrictions on the trial ONLY), you can't burn to DVD, which is MPEG-2, but you can Preview. You can also explore building a DVD with Menus, etc., you just cannot burn to folder, disc, etc., until you get the full version.
    I have never had a PGC Error, nor have I ever seen a "Mismatched Audio" error. I tried to put much thought into the two PGC Error threads, but do not think I was able to help, at all. Also, most subscribers just posted, "yeah, me too," and never came back to answer anyone's questions. I also agree with Stanley, that most errors occurred well within the Project's Timeline, not at the beginning. I also agree with Stanley's suggestion to look at Jeff's and Neil's comments in those two threads. If noting else, their suggestions on how to work with Encore will give you a nice education.
    Good luck,
    Hunt
    [Edit] Re-reading this thread, I think I warned Raymond about a moot point. Raymond, if you have Encore2, of course you can burn a DVD. I saw the mention of "trial," and jumped to the conclusion that you had the trial of CS3 *only* which would not allow you to use EncoreCS3 for a burn operation. Obviously, the trial of the Premiere side will preclude your Exporting in MPG, and also preclude Exporting Audio with the SurCode Dolby Digital AC3 encoder (separate purchase from Minnetonka, but a great plug-in if you do Surround 5.1 Sound). Please pardon my warnings, and caveats, if you have Encore2.
    Also, the Check Project function is mainly checking navigation within the DVD specs, and I've never seen any Asset errors from it. Maybe I just have not had any???? Still, good luck!

  • Encore DVD 2.0 音声のノイズ

    Encore DVD 2.0にMPGファイルを読み込ませたところ、再生したときにまるで受信状態の悪いラジオのようにザラザラとしたノイズがのり、音が途切れ途切れになってしまいます。明らかに音質が劣化して おり、聞くに堪えない状態です。他にWavやMP3などの音声ファイルでも試してみましたがやはり同様の症状が出ました。
    最初はPremiere Pro 2.0でも同じ現象が出ており、そちらはオーディオハードウェアの設定を変更することで解決したのですが、Encore DVDにはその設定項目がないためどうすることもできません。
    PCはSonyのVAIO TypeR VGC-RC50、OSはWindowsXP Home SP2、メモリは1GB、HDDは160*2のRAID 0、グラフィックカードはNVIDIA GeForce 6600、サウンドデバイスはSigmaTel HIGH Definition Audioとなっています。ドライバはSonyから提供されている最新版です。念のためハードウェアアクセラレータの値を下げてみたりもしましたが症状は改善しませんでした。
    何か問題解決の手がかりになりそうな情報があれば教えてください。

    >chances of them selling encore cs3 in the future separate?
    Since their entire marketing push seems to be the bundling of the 2 products, I would say "slim to none"
    >hurry and buy encore 2.o
    The least expensive way to get Encore 3 is to buy Premiere Pro 2 right NOW and get a free upgrade to Pro3+Encore3 when it is released
    If you have any previous version of Premiere, you may even buy Pro2 for the upgrade price and receive the free upgrade to the version 3 duo

  • Encore DVD 2.0 on VISTA

    Hello,
    I am following a conversation with the technical support of Adobe.
    I have just changed my computer and it is optimized for Windows Vista. At this time it runs on XP, and I encounter some problems with the graphics card and WiFi card.
    My questions are:
    - Does among you, somebody has already installed Encore DVD 2.0 on Vista (I have the Production Studio Premium Creative Suite)?
    - If yes, have you encountered any problems?
    Thank you.
    Sincerely, Olivier.
    Bonjour,
    Je fais suite à une conversation téléphonique avec le support technique d'Adobe.
    Je viens de changer d'ordinateur et ce dernier est optimisé pour Windows Vista. Bien qu'en ce moment il tourne sous XP, je rencontre quelques petits soucis avec la carte graphique et la carte Wifi.
    Mes questions sont les suivantes :
    - Est-ce que parmi vous, quelqu'un a-t-il déjà installé Encore DVD 2.0 sous VISTA (je possède la suite Production Studio Premium) ?
    - Si oui, avez-vous rencontré des problèmes particuliers ?
    Merci d'avance.
    Cordialement, Olivier.

    EncoreDVD CS2 on Vista is unsupported.
    Some users get lucky, but nothing is guaranteed, and you will not get any support at all (apart from those here who have managed to get it working).
    Your best bet is to upgrade to CS3 - that is Vista 32-bit qualified.

  • 4:3 and 16:9 mix onto one Adobe Encore DVD

    Using Adobe Encore DVD, I have made a 4:3 and 16:9 mix of movie timelines and menus on one DVD.
    Encore previews the mix of 4:3 and 16:9 movies/menus in the one project correctly.
    The dvd disc I made plays 4:3 and letterbox 16:9 on my 4:3 TV correctly.
    The dvd disc I made plays 4:3 and 16:9 in InterVideo DVD on my computer OK.
    Why when I take the disc to the shop to view on a widescreen monitor does it not show each aspect ratio correctly. I hope it is just a setting there but we tried many settings on the DVD player and on the monitor. When 4:3 played correctly, 16:9 did not and vica versa.
    Is it me or the shop?
    This page was helpful http://www.adobe.com/support/techdocs/329473.html
    Thanks, freddo

    We were just stuggling with this for some time, and eventually discovered that we were not properly using Encore.
    We had two videos:  one as 4:3, the other as 16:9.
    We created a menu, brought the videos into the timeline, linked everything properly, but would not get the expected results.
    We eventually learned that we were supposed to create TWO timelines; one for the 4:3, and one for the 16:9.
    Hope this can save someone some time.

  • Encore DVD Writing Cancels won't play on DVD player issue

    So I have a very confusing issue with encore.
    When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment)  the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
    I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?! 
    Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and  skips  around as if the DVD is scratched or damaged?
    ! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it.  I used different DVDs and it didn't help.
    I work for a company that needs to copy the DVDs but they can't be copied. Don't know why? 
    Here are my settings
    Mpeg 2-DVD exported from Pr.
    720x480
    Codecs: Mpeg video, Mpeg layer
    Duration: 1:10:26
    Encore DVD transcode status: Don't Transcode
    Encore Project/assets
    2 Menus
    1 Mpeg video
    1 Timeline
    Build
    Format: DVD
    Output: DVD disc
    Source: Create Using current project
    4.7 gb disc
    Has 510mb free
    All regions
    Unlimited copies
    First Play and title button are a menu
    Check build is good.
    I really need help with this weird issue quickly thanks.

    Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
    I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
    I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
    I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v.  It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out. 
    The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
    Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
    So any help is greatly appreciated
    whether it be a specific issue you know of dealing with used Macs and issue similar to mine
    or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated,  I've already burned through about 13 discs and even more pain pills for the headaches!!

  • I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    Hi,
    first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
    first i edited my video in premier cc
    sequence 1280X720, 59,94 fps
    48000hz - stereo
    the i linked it with dynamik link to after, make some color correction, etc etc etc
    i renderd in quicktime animation
    my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
    i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Maybe you are looking for

  • Problem in Opening of Calendar in portal 3.0.9.8.4 ? -URGENT

    Dear All, I have recently applied the above patch(3.0.9.8.4). I have my Calendar and its Parameter Page(page based on Procedure) in two Tabs of a page. After selecting the Parameters when I press the button to submit to the Calendar Tab IT DOES NOT G

  • Acrobat 7.1.0 update halted by fatal error; how to uninstall?

    I've been running Acrobat 7.0.9 on Windows XP with no problems. I just tried to install the 7.1.0 update. When I told it OK to reboot, I got a fatal error in the installation. I rebooted manually, and then got the same fatal error. My PDF files now h

  • Weblogic.rmi.cluster.CallRouter, how to place classes?

    Hi, I,m using Weblogic 7.0. I want a class to be loaded on different cluster servers depending on an argument. I've defined a remote interface for the class, the class implementation that implements that remote interface, and a class that implements

  • Library error when configuring PHP with OCI8

    I'm running into a problem running the configure command to include OCI8 in our Linux PHP in order to connect to a remote Oracle database. I've been following the instructions on the page: http://www.oracle.com/technology/pub/notes/technote_php_insta

  • Add a new DTR in my NWDS

    Hello guru, i have a big problem whit my NWDS. After working in a project for some months, last week i started to work in a new project. When i change my NWDS property for link me in other server and create a new DTR, my NWDS still to see first older