Encore DVD zeigt Timeline nicht synchron?

Habe folgendes Problem im Zusammenhang mit Subtitles festgestellt:
Setzt man den Lesekopf in der Timeline auf die Stelle an der entsprechend dem Bild auf dem Ausgabemonitor der Timeline ein Subtitle beginnen soll, so sieht die zunächt völlig in Ordnung aus. Das Ende des Subtitles sucht man ebenfalls mit dem Lesekopf (einige Frames vor dem Szenenwechsel)und setzt hier den Out-Point. Gibt man nun die Timeline wieder, so ragt der Subtitle kurz in die nächste Szene hinein. Kontrolliert man das Ein- und Ausblenden des Subtitles mit den Pfeil-rechts- bzw. Pfeil-links-Tasten so erfolgen Ein- und Ausblendungen präzise wie man es sich wünscht.
Was mache ich falsch? Oder handelt es sich um einen ganz "normalen" Fehler?
Günter Kacalek
[email protected]

Hi
Du armer, das weiss leider gerade niemand so genau. Schau mal in´s US Forum zu Encore, dann dürften dir so langsam die Tränen kommen - kein Witz Da ist alles Thema, weil so gut wie nicht´s funktioniert.
Ansonsten den guten alten TmpegEncoder benutzen. Das hilft im zusammenspiel mit Encore in der Version 1.1 aber auch nur bedingt.
Achim Kredelbach

Similar Messages

Encore DVD 2.0 "Timeline has a (Hpgc) error at 00:00:00:00

System: Win XP, 1GB RAM etc. I've used Encore DVD 2 for 3 years, never had this error message:
"Timeline has an error at 00:00:00:00.
PGC Error - PGC Info - name= (Name of Timeline) ref= Hpgc, time= 00:00:00:00"
Check project was initially fine. I rebuilt entire project, same error. But Checking project, this time round, said it was an AUDIO error.
Transcoding all works, then the error appears at the Start of the actual build.
Help, I have 30 orders for this DVD, and nothing to show!
Raymond
New Zealand

@Stanley,
Thank you for some more input on the PGC Error mess, like the "H" being a designator.
@Raymond,
John's rec. for G-Spot is a good one. I use this about every week, and sometimes on many files in a day - depending on what client's load onto my desk. This little freeware program will do many things, but probably the most important is to tell you exactly what your AV (Audio/Video) file consists of, which CODECs are used for the Audio and the Video and whether your system has them installed.
As Stanley points out, MPG is not available (in or out) in the Premiere Trial version. Still, you should be able to File>Export>Movie and select, first Video (only, non-muxed) DV-AVI. Then do this again, but select Audio (only, non-muxed) PCM-WAV. This will give you elemental streams.
In Encore, Import_As_Timeline, your DV-AVI, and Import_As_Asset, your WAV. Drag your WAV to the Timeline.
Now, as the trial version does not allow any use of the MPG CODEC (licensing restrictions on the trial ONLY), you can't burn to DVD, which is MPEG-2, but you can Preview. You can also explore building a DVD with Menus, etc., you just cannot burn to folder, disc, etc., until you get the full version.
I have never had a PGC Error, nor have I ever seen a "Mismatched Audio" error. I tried to put much thought into the two PGC Error threads, but do not think I was able to help, at all. Also, most subscribers just posted, "yeah, me too," and never came back to answer anyone's questions. I also agree with Stanley, that most errors occurred well within the Project's Timeline, not at the beginning. I also agree with Stanley's suggestion to look at Jeff's and Neil's comments in those two threads. If noting else, their suggestions on how to work with Encore will give you a nice education.
Good luck,
Hunt
[Edit] Re-reading this thread, I think I warned Raymond about a moot point. Raymond, if you have Encore2, of course you can burn a DVD. I saw the mention of "trial," and jumped to the conclusion that you had the trial of CS3 *only* which would not allow you to use EncoreCS3 for a burn operation. Obviously, the trial of the Premiere side will preclude your Exporting in MPG, and also preclude Exporting Audio with the SurCode Dolby Digital AC3 encoder (separate purchase from Minnetonka, but a great plug-in if you do Surround 5.1 Sound). Please pardon my warnings, and caveats, if you have Encore2.
Also, the Check Project function is mainly checking navigation within the DVD specs, and I've never seen any Asset errors from it. Maybe I just have not had any???? Still, good luck!

Preview bei Encore DVD 2.0

Guten Tag,
ich würde gerne wissen, wie man bei Adobe Encore DVD 2 eine "Preview" also bei einem Link auf eine Szene eine kleine Voransicht erstellen kann? Hab das Programm jetzt schon einige Zeit benutzt, finde aber in der Hilfe-Datei keine Lösung meines Problems, da ich nicht weiss wie man die "Preview" auf Deutsch bzw. in diesem Programm bezeichnet. Bei der Eingabe von "Voransicht" bekomm ich nur Hilfethemen zur Voransicht der kompletten DVD.
Danke dass Sie sich Zeit nehmen um diesen Beitrag zu lesen, MFG
PsYcHo232

Leider meinte ich das nicht... Ich weiss wie man die Vorschau aktiviert, aber ich möchte bei einem Link - z.B. auf das 2. Kapitel ein kleines Fenster anzeigen lassen, welches einen Ausschnitt aus diesem Kapitel zeigt. Also so bald der Link aktiv ist, soll diese Fenster dann die Vorschau abspielen.... Hoffe ich habe das nun verständlich verfasst ;-) Trotzdem Danke für die Antwort, MFG
PsYcHo232

4:3 and 16:9 mix onto one Adobe Encore DVD

Using Adobe Encore DVD, I have made a 4:3 and 16:9 mix of movie timelines and menus on one DVD.
Encore previews the mix of 4:3 and 16:9 movies/menus in the one project correctly.
The dvd disc I made plays 4:3 and letterbox 16:9 on my 4:3 TV correctly.
The dvd disc I made plays 4:3 and 16:9 in InterVideo DVD on my computer OK.
Why when I take the disc to the shop to view on a widescreen monitor does it not show each aspect ratio correctly. I hope it is just a setting there but we tried many settings on the DVD player and on the monitor. When 4:3 played correctly, 16:9 did not and vica versa.
Is it me or the shop?
This page was helpful http://www.adobe.com/support/techdocs/329473.html
Thanks, freddo

We were just stuggling with this for some time, and eventually discovered that we were not properly using Encore.
We had two videos: one as 4:3, the other as 16:9.
We created a menu, brought the videos into the timeline, linked everything properly, but would not get the expected results.
We eventually learned that we were supposed to create TWO timelines; one for the 4:3, and one for the 16:9.
Hope this can save someone some time.

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

Encore DVD 4:3 or 16:9

Heelo Everyone,
I need a bit of a help.
I have a project but not sure what to do.I want to make DVD using Encore DVD.I have Several Video Clips which will be the DVD.
The problems are:
1.half of the video clips are 4:3 aspect ratio and the other half 16:9.So do i make a Encore project for 16:9 or for 4:3 ratio.I will be encoding the clips into DVD Mpeg-2 file so i will use Encore DVD only to compile the DVD.I dont know if i insert this files are they are 4:3 ration and 16:9 ratio in 16:9 project settings will that affect my 4:3 videos?I know that Encore has an option that if a widescreen dvd is inserted in 4:3 screen it will envelore the image .I would appreciate your help on this one.
2.All my videos are Progressive Scan.Do i need to convert them to interlace(because all commercial dvd are interlaced)?Which field should be first?I am in Europe.
Thank you very much

The Encore project setting does not set 16:9 vs 4:3. You can mix screen ratios, as long as you do not mix them on the same timeline.
The letterbox etc settings are generally set by the player, by telling it what your TV is.
DVDs save as interlaced, but they code it so you can play it as a progressive as long as the player supports it.

Link Menu Buttons to Subtitle Track in Encore DVD 2.0?

I desperately need help with subtitles in DVD 2.0. I did: “Timeline > Add Subtitle Track” on each of my 10 timelines. I added a few subtitle texts to check how it works. So far so good. I created a submenu with “Select Subtitle, etc.” Then I tried to ‘link’ the Subtitle Button on this menu to subtitle track #1 – but it wasn't available in the Subtitle Button’s Properties panel’s Link drop down menu (and the Override drop down menu was grayed out).The Adobe Encore DVD 2.0 Manual says (on p. 222) that “You can set the audio or subtitle track with any link control (such as End Action or Override) in the Properties panel.” This doesn't seem to be the case unless I am doing something wrong (most probably). Also, on the same page, the manual says that “2. Select a button to set … the subtitle track… 3. In the Properties panel, choose Specify Other from the Link pop-up menu.” There is no “Specify Other” selection in the list. (One comment: The subtitle track does not show up in the Project panel – may be this is the problem?) I would appreciate any help. Thanks, Laci.

HI Bill, I have another subtitle question. I finished my first (big) Encore DVD 2.0 project yesterday (). I build the DVD image but when I tried to burn it to a DVD disk it turned out that the project has about 122 million more bytes than what would fit on the disk (). So, with PE 7, I edited some of the 9 movies in the project (exported them with same name, to the same place as during the first time) and I opened the Encore project. I noticed that it used the old (imported by Encore) avi files. Then I did something not very smart: deleted the old (and long) avi. files from the project and imported the edited (and shorter) new avi files. At this point, I noticed, that my laboriously created subtitles disappeared .
Do these subtitles still exist somewhere? There is a file in the project, called "SpuSplit.ses" in the SubtitleDataFiles folder but I do not know how to open it or if it would help at all. More important: What should I do next time to save the subtitles (or audio for that matter) if I still want to make some (minor) editing on my project after building the DVD? (I assume that I have to create the subtitles in script files and then import them as many times as I want. Am I right?)
Thanks for any help, Laci.
(BTW, I uploaded my picture and it is in 'My Profile' but does not show up with these massages.)

Titles on linked Pr sequence not appearing on Encore DVD?

I have a sequence linked from Pr pro CS5 to Encore CS5. I have added titles to video track two in the Pr sequence. They link up just fine in En. When I preview disc in En, the titles come in and fade out just as planned. All looks great. However, when I burn the project to DVD, there are no titles on the DVD??? I saved the Pr project, even rendered it prior to creating DVD in En CS5. I have done this process twice. Both times no titles on DVD. What am I missing??
Thanks very much for advice. This is a once a year project, so sorry I have to re-learn many things again...and again.
Kenny

UPDATE:
Anyone have any ideas of things I could test? As I stated, the disc when played in my PC shows the titles, just not on two different stand alone DVD players I have?
Stan, you mentioned source/sequence settings? Is there something specific I could provide?
So you know what I did to create these titles. In Pr, working with the sequence I have dynamically linked to En in the timeline. In Project panel, new item, title. Then edit title and drag to video track two in timeline, set keyframes for fade in/out.
To make my next title, in title edit window, New Title Based on Current Title, rename it, edit, drag that to timeline etc.
These titles show in En when previewing disc and on burned disc played on PC as stated.
Stuck in the mud?
Thanks for any/all suggestions!
Kenny
__0
_ \<,_
Date: Thu, 25 Nov 2010 06:22:44 -0700
From: [email protected]
To: [email protected]
Subject: Titles on linked Pr sequence not appearing on Encore DVD?
I would build to a folder and see if that plays correctly on the computer. (Rule out disk/burning issues.)
Do a small test project if the files are large, but bring the same bit out of Premiere with no fades on the titles. Do they burn?
I wonder about your source/sequence settings.
I always find such problems very odd.
>

Exporting to encore dvd with trial version of PPro CS3

My question:
Are we supposed to be able to use Encore DVD with the trial version of PPro CS3?
If so, then what are the proper steps?
Background:
i have downloaded a trial version of PPro CS3. I have wanted to check out the Encore DVD maker that now is included with the PPro. However, when i attempt to export a timeline to Encore, the 'export to encore' is not active. In other words, i see the words 'export to encore' but they are faded and thus the link to it is 'dead'.

Trial does not with any flavor of MPEG due to license restrictions
You may import-edit-export DV AVI type 2
Encore is not activated until you pay and convert the demo to real
Read the FAQ article
Converting Download Trial to Registered
(read subject
How do I convert a trial version to a version for unrestricted use?)

Computer CRASH after starting up ENCORE DVD 2.0

My PC is rebooting always when I'm trying to start Encore DVD 2.0.
Encore loads up everything and then when it should show Timeline etc. but I see Windows blue screen with a lot of txt and digits and after few seconds (not enough time to read what is that all about) computer reboots.
Whats wrong? Please help !!!

Notes on Optimizing your computer for video editing 
Step 1 - make sure ALL SOFTWARE is installed on 
---your boot (usually C:) hard drive 
Step 2 - make sure ALL VIDEO DATA is set to go 
---to your separate data drive (that is NOT a 
---logical partition, but a separate PHYSICAL drive) 
---with separate read/write heads for data throughput 
Step 3 - visit the VideoGuys Tweak Pages 
---<a href="http://www.videoguys.com/Windows_Tips.html" target="_blank">http://www.videoguys.com/Windows_Tips.html</a> 
---Once there, select as appropriate for your version of Windoze 
Step 4 - insure that UNneeded software is not running 
---<a href="http://www.mlin.net/StartupCPL.shtml" target="_blank">StartUp Control Panel</a> or <a href="http://www.macecraft.com/products/" target="_blank">JV16 Power Tools</a>

Vorsicht ! Encore DVD 2.0 lässt sich nur 2x installieren

Habe mir mal , aus Interesse, ( Habe Encore 1.5) die Schulungs DVD von Video 2 brain gekauft. Dabei habe ich erfahren , daß man nur 2 x Encore DVD 2.0 installieren kann !!
Was aber, wenn wie bei mir geschehen der PC
mehrmals abstürzt ?, bis sich wie bei mir der eigendliche PC Fehler heraustellte. (fehlende Festplattenkühler,die nicht bei dem kompl gekauften PC eingebaut waren)
Dann hat wohl der Käufer des Produktes
eine Niete gezogen. Zu einem Update auf
2.0 kann ich mich unter diesen Umständen nicht entschliessen, denn wer weiß schon wenn der nächste PC absturz oder Neukauf
eines solchen bevor steht.

Hallo Horst,
ich hatte mal was ähnliches bei PPro1.5.
Habe dann bei Adobe angerufen und die haben direkt geholfen. Bitte aber Kaufbeleg und Seriennummer bereit halten.
MfG
Horst

Encore DVD 2.0 hat Probleme beim Transkodieren??

Hallo Leute,
bin bis jetzt mit der Stabilität und dem neuen Funktionsumfang von Encore DVd 2.0 sehr zufrieden.
Ein 90 Minuten Projekt lies sich ohne Probleme oder Abstürze erstellen und beim Prüfen des Projektes wurden keine Fehler erkannt oder lehre Verlinkungen entdeckt.
Jetzt kommt der Hacken:
Beim Versuch mein Projekt dann auch auf eine DVD zu bringen sollen natürlich die AVIs transkodiert werden, was ich "Automatisch" durchführen lassen wollte, also ohne selbst definierte Transkodiereinstellungen.
Der Render-Vorgang beginnt mit dem ersten von 5 AVI-Files und wird aber nach ca. 20 einfach abgebrochen mit der Meldung "Encore DVD hat ein Problem erkannt und muss beendet werden". Sonst kommt kein weiterer Hinweis und das Programm wird komplett beendet.
Dies ist mir insgesammt 4mal passiert und ich habe keine Ahnung an welcher Stelle ich die Fehlersuche beginnen soll, da ja keine echte Fehlermeldung erscheint. Das bis zu diesem Abbruch berechnete m2v.File finde ich zwar im entsprechenden Ordner auf der Platte wieder und lässt sich auch bis zur Abbruchstelle abspielen, aber mehr auch nicht. Unter Encore DVD 1.5 hatte ich solche Probleme nicht, bei gleicher Rechnerkonfiguration.
Wer kann weiterhelfen?
Gibt es Empfehlungen zur Renderreihenfolge?
Gruß MBLOH
P.S.
Habe soeben festgestellt, dass der Rechner auch das Rendering abbricht, wenn ich meine AVIs mit einem Externen Canopus Decoder berechnen lasse.
Allerdings nur bei Projekten, die länger als ca. 8 Minuten sind. Ein 7 Minuten Projekt wurde sowohl von Encore DVD als auch von Canopus ohne Probleme als MPEG berechnet. Längere AVIs scheinen dagegen Probleme zu verursachen.
Da keine genaue Fehlermeldung kommt, weis ich auch nicht, was in meinem PC evtl. falsch konfiguriert sein könnte.
Welche Anwendungen sollten z.B. nicht im Hintergrund laufen? Ich habe einen MOD32 Virenscanner. Könnte der evtl. der Grund sein. Was kann man unter "msconfig" bedenkenlos deaktivieren.
Ich hoffe, einer kann helfen.

Hi,
dann mach den dicht und den Bildschirmschoner und das....
alles was im Hintergrund lüft könnte stören.
Gruß Jörg

Encore DVD 2.0 soll Menüvorschau auf DV-Gerät abspielen können???

Hallo Leute.
Wer von Euch hat es bereits geschaft, unter Encore DVD 2.0 die Vorschau eines erstellten Menüs über den DV/Out des Motherboards an ein angeschlossenes DV-Gerät weiterzuleiten, um eine Video- oder Menüvorschau auf einem TV-Gerät anzeigen zu lassen. Laut Handbuch heißt es hierzu nämlich lapidar auf Seite 181 des PDF-Files:
"So legen Sie Audio/Video Out-Voreinstellungen fest
Normalerweise wird Video über den Monitor und Audio über die Lautsprecher des Computers ausgegeben. Sie können
Vorschauanzeigen und/oder andere Ausgaben (z. B. Videos im Monitorfenster) jedoch auch auf einem angeschlossenen
DV-Gerät abspielen. Legen Sie Audio/Video Out-Voreinstellungen wie folgt fest:
1 Wählen Sie Bearbeiten > Voreinstellungen > Audio/Video Out.
2 Wählen Sie eine der folgenden Optionen aus:
Audio-Ausgabegerät Hiermit geben Sie das Audio-Ausgabegerät an.
Gerät: Um das Video auf eineman geschlossenen Gerät abzuspielen, wählen Sie das Gerät im Menü Gerät. Falls das Gerät
nicht im Menü angezeigt wird, prüfen Sie, ob es eingeschaltet ist, und klicken Sie dann auf die Schaltfläche Status prüfen.
(Diese Einstellung gilt für sämtliche Videos mit Ausnahme von Vorschauen.)
Menü-Editor auf DV-Hardware anzeigen: Hiermit wird der Menü-Viewer auf dem angeschlossenen DV-Gerät angezeigt."
Genau dies habe ich probiert. Mein Sony DV-Rekorder wird als Sony-DV-Gerät im sog. VCR-Modus angezeigt. Also erkennt Encore DVD 2.0 schon mal die Hardware. Leider erhalte ich aber nicht das versprochene Bildsignal, dass ich dann über den Rekorder zum Fernseher schicke.
Mache ich es mir jetzt nur zu einfach oder interpretiere ich das Handbuch falsch, oder hat jemand eine Idee wie diese Funktion sonst zu verstehen ist.
Laut Matrox, wird eine WYSIWYG-Funktion über die RT100Pro Karte nicht mehr unterstützt, wenn man die neuen Matrox Tools 6153 installiert hat. Ich habe allerdings nur Encore DVD2.0 installiert unter Beibehaltung der alten Matrox-Tools 6122.
Encore 2.0 läuft super stabil bei mir ohne jede Beanstandung, nur eben diese Funktion will mir nicht gelingen.
Wer kann helfen?
Gruß MBLOH

Hi,
dann mach den dicht und den Bildschirmschoner und das....
alles was im Hintergrund lüft könnte stören.
Gruß Jörg

Encore DVD 2.0 - problems with video - distortion in some parts

Hi there
I use Canopus Edius software for video editting and Canopus ProCoder for creating of mpeg2 (m2p) files. When I import these files to Encore DVD 2.0 and preview them from timeline the video is distorted in some parts(small squares appears on the screen but then video continue again (always between two clips). Interesting is that if I add transition on these place and create mpeg file and import it to Encore again then it is played correctly).
Same m2p file which does not work correctly in DVD Encore 2.0 work fine in DVD Encore 1.5!!!!
Pls give me some advice how to fix it. Thank you in advance.
Some info about my system:
P4 3.6
1 GB RAM
2 * 200 GB HDD
ASUS Geforce 6600 VGA
Canopus Edius NX

http://www.adobeforums.com/cgi-bin/webx?128@@.3bbf5520

Adobe encore dvd 1.5 simply create a dvd

I am new to Encore. I just want a simple step by step to burn a dvd with my translated norwegian subtitles. I have created a timeline and in preview everything is ok. But my subtitles will nott show when I burn a DVD

Thank you, but that is not the problem. When I open the DVD I created there is no subtitles to show.
Den 8. juni 2013 kl. 00:38 skrev Stan Jones <[email protected]>:
Re: Adobe encore dvd 1.5 simply create a dvd
created by Stan Jones in Encore - View the full discussion
Subtitles must be turned on to see them on the DVD.
You can use the remote control for your DVD player to turn subtitles on and off. You can do that now to see whether you actually succeeded in including them on your DVD. If you did, users can use the remote control and you are all done.
If you want them to appear when a user starts the disk, you can set them on by default. See "Set the Default ... Subtitle Track here:
http://help.adobe.com/en_US/encore/cs/using/WSbaf9cd7d26a2eabfe8074010 38582db29-7e8ca.html#WSbaf9cd7d26a2eabfe807401038582db29-7e8aa
A user can turn them off with their remote, or yoiu can create menus for this. See "Set buttons to select audio or subtitle tracks" on the same link above.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5389265#5389265
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5389265#5389265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5389265#5389265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Encore DVD zeigt Timeline nicht synchron?

Similar Messages

Maybe you are looking for