Encore Ejects Disc on Build

"Invalid MPEG" on MPEG2-DVD
Before I waste more discs, do you see anything wrong with this wrapper please?
Example of main feature
Format
: MPEG-PS
File size
: 1.87 GiB
Duration
: 45mn 58s
Overall bit rate mode
: Variable
Overall bit rate
: 5 826 Kbps
Video
ID
: 224 (0xE0)
Format
: MPEG Video
Format version
: Version 2
Format profile
: Main@Main
Format settings, BVOP
: Yes
Format settings, Matrix
: Default
Format settings, GOP
: M=3, N=12
Duration
: 45mn 58s
Bit rate mode
: Variable
Bit rate
: 5 518 Kbps
Maximum bit rate
: 6 922 Kbps
Width
: 720 pixels
Height
: 576 pixels
Display aspect ratio
: 16:9
Frame rate
: 25.000 fps
Standard
: PAL
Color space
: YUV
Chroma subsampling
: 4:2:0
Bit depth
: 8 bits
Scan type
: Progressive
Compression mode
: Lossy
Bits/(Pixel*Frame)
: 0.532
Stream size
: 1.77 GiB (95%)
Audio
ID
: 189 (0xBD)-128 (0x80)
Format
: AC-3
Format/Info
: Audio Coding 3
Mode extension
: CM (complete main)
Muxing mode
: DVD-Video
Duration
: 45mn 58s
Bit rate mode
: Constant
Bit rate
: 192 Kbps
Channel(s)
: 2 channels
Channel positions
: Front: L R
Sampling rate
: 48.0 KHz
Bit depth
: 16 bits
Compression mode
: Lossy
Delay relative to video
: -80ms
Stream size
: 63.1 MiB (3%)
Menu

Use a DVD+RW for tests; also, build to a folder (or image) and play that on the computer. That is also a helpful troubleshooting test.
Since you are having trouble, and generally it is preferred, export without muxing (you'll get an m2v and ac3.

Similar Messages

My 2007 intel imac ejects discs within 2 seconds

My 2007 intel imac ejects discs within 2 seconds. The last time I used my disc hardware was to install software for a new Cannon all in one. It worked perfectly. I have tried many discs including one movie made on this same machine. Pleease help me troubleshoot before I have to transport my computer to the Apple store. Thank you in advance.

It could be that the laser has dust on it; a laser cleaning disk is available at stores which specialize in audio and video- BestBuy, or OfficeDepot would be a place to start. Run a cleaning session to see how that plays out. It could be the optical drive itself. The best approach is first to try steps that do not involve transporting your iMac as you indicate.

How far should SuperDrive eject discs?

How far does your SuperDrive eject discs?
The one on my MBP Core 2 Duo 17" 2.33 GHz ejects recordable discs only about 1-3/8 in, which makes it impossible to remove them without touching the top or bottom surface. My newer MBP Core 2 Duo 17" 3.06 GHz ejects them much farther (about halfway), so they can be handled by the edges instead.
The problem doesn't occur with commercially pressed installation discs, only with discs I use to record on (Taiyo Yuden 8X DVD+R, Verbatim 8X DVD-R and Taiyo-Yuden 8X CD-R).
This is the second replacement of the drive from AppleCare with the same problem. (At least I think they replaced it a second time. The service record said, "Doesn't eject media" instead of "Doesn't fully eject media," so maybe they tested it and thought it was fine.)
Is this normal behavior? Anyone else seeing this?
Thank you,
David

MacBookPro Lover wrote:
My MBP 15" doesn't eject very far, but a little more than what your's does (I'd say around 2"). It does ok for me, though.
Do you notice any difference between commercially recorded discs and recordable ones?
David

Bluray burner ejects disc before avchd burn completed

blu-ray burner ejects disc before avchd burn completed Premiere Elements 12. Any suggestions please.
When I first got the blu-ray burner it worked perfectly with Premier Elements, burning both blu-ray and avchd discs. Now it won't do either
Bug in Premiere Elements I guess, just like the continuing crashing of Elements!? I have to save my work every few seconds to make sure I don't loose any!!!
Al

aljohird
What computer operating system is your Premiere Elements running on?
With your Publish+Share/Disc/AVCHD can you burn to folder successfully for AVCHD on DVD disc?
Just before you were ready to start the burn to AVCHD on DVD disc, In the Quality Area of the burn to AVCHD on DVD, what are the readings for Space Required and Bitrate (with and without a check mark next to "Fit Content To Available Space"?
Please review your Scratch Disk situation (locations and free space at the locations). See Edit Menu/Preferences/Scratch Disks as well as the contents of the project's files/folders in the 12.0 Folder in Libraries/Documents/Premiere Elements (if Windows).
Are you running from a User Account with Administrative Privileges + Run As Administrator?
And have you explored other disc brands as well as types?
More later.
Thank you.
ATR

DVD Superdrive keeps ejecting discs

My trusty old PB G4 has just started to eject discs from the dvd superdrive. I've tried various discs (mainly cd-r) but for some reason it squeaks and squawks then ejects the disc????
Could this be a media problem or perhaps.......a hardware problem?
Any thoughts gladly appreciated.
Dan

I'm having this problem with my 2.5 Penryn Macbook Pro
And I had the same problem with my last mac which was a 2.8 24" silver iMac.
I took it to be repaired, they replaced the superdrive, and then I sold it on. But now the person i sold the iMac to is saying they are having the same problem.
It must be a fault with Apple's superdrives. My external firewire slot loading burner works perfectly.
Unfortunately I'll have to use that and wait until I buy my next mac before i can take this one in to be repaired. Hopefully they dont just replace the drive with another one of the same model.
I found a solution for this problem with old powerbooks:
http://bura-bura.com/blog/archives/2005/07/11/a-fix-for-my-superdrive-problems/
But no success with my MBP

Macbook Pro 2008 ejects disc and won't recognize external drive

My Macbook Pro 15in 2008 immediately ejects discs. I have tried opening and cleaning the drive, but no luck. I went on to connect my external drive, but when I insert the discs, they just spin for a moment, and then stop. This goes on indefinitely, and there is no way to eject the disc unless I hook the external drive to another computer. I tried resetting the PRAM, but no luck. I am running OS X 10.7

Hi bigdubee,
The exact same thing happened to my 2010 MacBook Pro today. Restarting with the "option" key held down, I get only 2 of the 3 options you listed in disk utilities ("disk0" and a subfolder of "disk0" labeled "Mac OS x Base system".
Did you take your Macbook Pro to the Apple store? And were they able to fix it?

HT1338 my dvd player ejects disc when inserted

my dvd player ejects disc when inserted on my macbook pro running on 10.8.4 OS X

Sounds like it could be a problem with your DVD drive. Usually it would be a problem with the lens. Since as far as I can tell it is ejecting discs right away, the usual fix of a cleaning disc is not possible.
If it is a slot loader like the offical Apple SuperDrive, you may be able to try a crude clean with the Wii Lens Cleaning Kit, although designed for the Nintendo Wii, it should work to a degree with other slot loaders.
Due to the design of the cleaner, it should remain in the drive until it is time to remove it. Though usually a dirty lens will still read some discs.
However, if the lens is sufficiently clean then the only other possibilities are a calibration problem or a hardware failure.
Certain lower quality drives can deviate from optimal calibration of the read laser over time, though with some drives it is possible to fix this, the fix has the potential to do more harm than good.
If it's a hardware failure, whether it can be fixed depends upon the type of fault, but new external drives are cheaper than most repair costs these days.
I'm not 100% familar with how OS X handles Disc drives, so I can't rule out the possibility of a software issue.

Encore CS3 Disc is in drive, but installation is asking me to insert disc!

I've got the disc in my drive bay. Autoloads, I click setup. It begins setup of Encore CS3... and then asks me to insert the Adobe Encore CS3 disc into D:\ drive! How is this even happening to me? Is there a way to fix it?

Brian,
With a few other Adobe installation issues, doing a copy of the installation discs to the HDD and then dragging the executable to the desktop has worked with similar problems.
There are a couple of things to think about:
1.) stop all AV, spyware and pop-up blockers BEFORE you attempt the installation
2.) with some applications, installation from Safe-Mode works, when other methods fail. Do not know if Encore will install in Safe-Mode. some recent Adobe apps will not.
3.) if you have had any trial, or beta Adobe versions installed, uninstall, and run Adobe Clean Script (from the Adobe site), prior to attempting to do another install.
Hope that one of these helps get the "Millennium Falcon" up and running.
Good luck,
Hunt

Encore CS6 - can't build ISO - Build button grayed out

Encore CS6 - can't build ISO - Build button grayed out

Make sure you have a path entered to save the image.
Also, the project must havesomething in it.
Edit: add image

Internal iMac superdrive keeps ejecting discs

The Superdrive on my iMac will not accept any discs. It just immediately ejects discs that I insert. This happened before about a year ago, but I forgot how I got it to work, and I can't find the thread here.
Thus this request: What do I need to do to get the Superdrive on my iMac to work again? I already cleaned it out completely with the air duster. I know that there is some keyboard startup trick or something that needs to be done to reset something, but my brain is aging, and I forgot what it is. Obviously any helpful suggestions will be greatly appreciated. Thanks so much.

Try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273

My imac keeps ejecting discs and wont read them

my imac keeps ejecting discs and wont read them

I did not ask for the full serial number. Anyway, you are the 7th week of 2008, unlikely that is a PRAM battery issue.
Since your machine isn't under warranty, I'd try a CD cleaner that supports car stereos, like this one from Radio Shack online, but only if Apple Authorized service technician says it is safe:
http://www.radioshack.com/index.jsp?productId=2361963
This being a user to user forum, I can't say if it is or isn't.
Or you can buy a supported external optical drive, like the various ones from http://www.macsales.com/
Internal optical drive replacement is complicated, and possibly covered on http://www.ifixit.com/

Mac won't eject disc

I have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up. Any advice?

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Cd/dvd drive keeps ejecting Discs

My ibook G4 14.1 (mid 2005) Keeps ejecting discs after i put them in, it will
not accept any disc whether is was a cd r-rw+/- or commercial disc or dvds,i am thinking it is about to die, but i want to see if there was something i was doing wrong or not. It does make every once in a while a grinding sound but has not made that sound for a while.

I'm having a similar problem with my iBook, but so far i've found no solution...

Accidentally trashed my Eject Disc icon--how do I get it back?

Somehow, I rolled the mouse near the Eject Disc icon in the dock, and before I knew it, it was in the trash and POOF gone. How can I restore it to the dock?

Thanks. For some reason, I actually had an eject disc icon in my dock sitting right next to the trash can. Don't know where it came from or how it got there, but it's gone now. I can still eject discs any number of ways, though, so I guess it's not a problem.

Eject Disc Message??, Eject Disc Message??

Odd problem. I just set up Airport Express. No issues with install. No issues with internet access. Problem is as follows:
When I put my Imac in sleep mode it appears to sleep for about 3-4 seconds than wakes up and message on screen says; did not eject disc properly etc. Than advises to look in finder for disc and eject. There is NO disc in the Mac! I have an Airport Express, Verbatim hard drive and modem all running through surge protector.
Not sure what is happening. I did restart computer but again if i put to sleep , sleeps for seconds and wakes up with the above disc message.
Any ideas??
Thanks
JK

I had this problem too, where it seemed I couldn't go eight hours without the Duo drives dropping and getting the "disc was not ejected properly" error message.
I tried the following and so far it seems to have fixed the problem:
In System Preferences > EnergySaver, make sure the setting “Put hard disks to sleep when possible" is unchecked.
I did this only on the Power Adaptor tab, but you might want to uncheck the setting on the Battery tab as well to be safe. (In my case, the Duo drives are unlikely to be attached when I’m running on battery, so I left the setting checked for the Battery tab so that the system can still power down the internal drive.)
Since I made the above change ten days ago, the Duo disks have not dropped, even when I left the system on with the Duo disks connected for a couple of days.
FYI I have the Duo set up with two RAID 1 sets spanning the two drives. I'm using Mavericks 10.9.4.

Encore Ejects Disc on Build

Similar Messages

Maybe you are looking for