Encore in /86 folder and process says *32. What the heck?
I've just reinstalled CS Production being careful to not install the 32 bit version but my (slow) build still shows Encore is starting in the /86 program folder and the process says *32 following Encore.exe so I have to assume Encore is running as a 32 bit program. Or trying to... Have I missed something? Could this be the reason one simple motion menu takes 30 minutes to render? (Walter)
I am not 100% sure (you should check the information at the Premiere Pro CS5 product page) but I think only PPro and After Effects are 64bit... not Encore
But, as I say, I could be wrong about that, so do go check the product page to verify that Encore is or is not 32bit only
Otherwise... you provide ZERO computer and project information, so provide DETAILS and maybe someone will be able to help
This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum
Including this post about 3 possible builds http://forums.adobe.com/thread/598040?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Similar Messages
-
Okay, so a couple of days ago I began getting these weird texts to my phone from 6250. The text reads VZWNMN:1
DOES ANYONE HAVE ANY IDEAS WHAT THIS IS? I've RECEIVED AT LEAST 50 OR MORE AND THEY KEEP COMING! Anyone out there have any idea how to stop them or block them?Did you try searching the community for similar discussions? There are five of them listed to the right of your post under the "More like this" column.
-
i am sick of this
Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you! -
Hello,
So this is annoying me to no end because I just spent $25 to sign up for iTunes Match and so far its wasted my time and given me nothing but a massive headache. This is obviously a major bug on the SERVICE END, not mine.
Starting with an empty iTunes library on my Mac, I began ripping my CDs in iTunes Plus AAC format the other night with the intent of matching & uploading my entire music library into iCloud for streaming & downloading to my iPhone 4S on the go. Simple in theory, right? After some basic tag editing -- changing genres, a simple alteration to a title here, deleting the composer there -- and then updating iTunes Match (Store > Update iTunes Match), I notice I'm getting duplicates of a bunch of my songs appearing on my iPhone. I haven't downloaded anything to the device, they're all just listed with the cloud icon next to them.
So I'm thinking, whatever, I screwed something up. I'm only several CDs into the process so I'll just delete the iTunes library and start over again. Shift + right click, delete everything. Do you want to delete these songs from iCloud as well? Yes. Update iTunes Match. There are 0 songs in iCloud. Okay.
The songs are still showing in my iPhone Music app. Strange. Swipe to delete does nothing, they're not on the device. They're pointing to files in the cloud that are either no longer there or somewhere that I cannot access anymore. Broken aliases. The album artwork still shows up, but playing the songs just kicks me back to the album menu. Navigating to Settings > General > Usage > Music shows me there is no data on the device. 0 bytes.
One thing I notice is that sometimes after syncing a handful of these broken songs will show up in a "Purchased" playlist on my iPhone within the iTunes browser -- I haven't purchased any music from the iTunes store, not one song -- and inspecting them with right click > Get Info reveals them as Stream files, not iTunes Plus AAC files.
Turning iTunes Match off and on again both from within iTunes and on my iPhone does nothing.
Syncing wirelessly or via USB does nothing.
Backing up and restoring my iPhone does nothing.
Double clicking the Home button and quitting the Music process, then opening it again does nothing.
Hard resetting the iPhone does nothing.
This is something that's happening with my Apple ID on the service end, not locally or on the user end. As long as iTunes Match is turned on in my iPhone settings, all of this broken music -- everything I've matched to iCloud and deleted -- shows up. I've done everything within the parameters of proper usage, and iTunes tells me there is nothing in iCloud after it updates but my phone keeps seeing crap that isn't -- or shouldn't be -- there.
I WANT to use iTunes Match, I just paid 25 freaking dollars for it, but its completely busted for me right now and I know ripping and matching some more CDs is just going to make it worse and populate my iPhone with an even bigger broken library. I just ripped and matched one more CD an hour ago without editing any of the tags, just let iTunes Match do its thing, and then after right clicking and following the prompts to delete the 18 songs both from both iTunes AND iCloud its still showing up on my iPhone. Busted like all the others.
Can we please get an update on this as soon as possible? This is driving me nuts and I don't know what else to do.It's a slightly convoluted process.
Disable iTunes Match on your iPhone
Settings > Music > Itunes Match
Now, make sure you've killed the Music app by double-tapping the home button, and deleting the app there where it is running. Important step. The app should not be active.
Next step:
Settings > General > Usage (it takes a while to load) > then delete the Music app there
Power your phone down, and back up again.
Sync your music via iTunes like you always have ...
... and this should fix your problem. -
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When I select files to archive, they move from my file folder, but then I go to the archive folder and it says Empty? Where are those files?
Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes. -
My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?
My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?
It means a valid system cannot be found. You need to reinstall OS X.
If you have Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you have Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??
If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I locked my MacBook with the find my iPhone app, then it switched itself off and now, when i restart it there is a white screen with a folder and a questionmark appearing on the screen, I can type in the password or do anything all. I really didn't wipe it, and in the app it says: MacBook locked toay at 15:49.
I am really desperate. Plz help me.
Thanks.Did you setup a lock code? I have done this operation via iCloud just few minutes ago and it's booted with 4 numbers lock code just fine. When you lock your Mac, it's restarts automaticly and then loads with lock screen and you are only able to enter password of 4 numbers to unlock it.
-
im trying to reset a iphone 4s that i bought from someone. it is in the middle of the restoring process and it says it needs the origional apple id and password. i dont have this and the person i bought it from got it from someone else so there is no way for me to get that info. is there any way around this issue?
No. There is no way around this. Without the credentials used to lock it, you can't use it at all. Return it to the person you got it from and get your money back. Failing that, turn it over to the police. There is a high likelyhood that it's stolen.
-
I'm trying to copy music from my PC to itunes. I open itunes, go to 'file', go to 'add folder to library', select the folder and nothing happens. What am I doing wrong?
Hello there, gleab.
The following Knowledge Base article reviews the ways to import content into iTunes:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Also keep in mind which formats can be added:
You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.
In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in. Then try to sync your purchased music to your phone again.
-
I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again
Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases. -
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?
Troubleshooting issues with iTunes for Windows updates - MSVCR80
Maybe you are looking for
-
How to set up older version of Java JDK?
I am a Java Developer, and I recently bought a Mac. I also just started working for a Client who is using JDK 1.6.0_23, and this is not going to change. The code fails to compile when running through the latest Java 1.6 JDK, so I REALLY need to dow
-
LSMW IDOC method to upload material master
hi, i want to upload the Material Master using LSMW Idoc Method. I have not worked in LSMW IDOC MEthod previously can anyone help me.. please.. ThankS IN ADVANCE GUHAPRIYAN
-
Dear all What tcode use for inbound idoc monitoring when data is transfer from one sap system to other sap system Thanks Amit
-
Attributes of result container
Hi! At design time of the sequence file I want to add additional information to the result containers to control the reporting of the step result. This additional information must be possible to attach to every kind of step - even to NI step types.
-
Fire Fighter Mail Notification
Hi Gurus, I have an issue with fire fighter....if i am not wrong...When i add a firefighter id to a user id ...it should send a mail...Fore Fighter controller and owner with a link to approve and then they approve the access...then it will send the u