Encore not loading codecs!!

Ok, so I haven't seen any kind of solution to this issue, and was hoping somone may have found a work around.
I have a full copy of CS5
No Trial.
When I launch Encore it tells me:
"Additional codecs that are not included in the trial version of adobe encore cs5 must be installed"
So I press ok, and it gets about 6-7% through downloading the codecs and then all of the sudden stops and says:
"Installation was successful. Encore must be restarted before the new codecs are available"
So I again I press ok and absolutely nothing happens. So I try starting encore again with the same results. It goes through this over and over and over.
I'm not going to uninstall my entire creative suite because of this crap. I'm sorry but its not worth the hours of going through all that, I can't afford that much downtime. So please god, someone tell me there is something I can do beside throwing adobe out my window.
-Thanks!

I'm not going to uninstall my entire creative suite because of this crap. I'm sorry but its not worth the hours of going through all that, I can't afford that much downtime.
Never say never!
But try a repair install of Encore only:
For the repair install, see this - for CS4, but the filenames are more up to date than other links available.
http://kb2.adobe.com/cps/408/kb408826.html

Similar Messages

PS3 (Playstation 3) issue not loading BDR Bluray | Adobe Encore CS6

I recently created a Bluray using Adobe Encore CS6, and the Bluray is not loading on my PS3, but is working fine on my other player (LG, Toshiba and PC). Does anyone have the same issue and found a solution? I need help on this as most of my client use their PS3 as Bluray player.
Authoring program: Adobe Encore CS6 with the Creative Cloud latest update
PS3 with latest firmware update (PS+ member with auto-update: on)
Video files: 1920x1080 FPS 23.976 Program Stream MPEG-2 for Bluray *.m2v (transcode with FCP Compressor)
Audio files: Dolby Digital Audio *.ac3
Burner software: CyberLink Power2Go V6
Burner hardware: HP BD Writer bd340i
Media: Verbatim BD-R 25GB 6x Speed
Project size: 20/25GB
The project setting in CS6 is: Blu-ray NTSC with MPEG-2 Codec at 1920x1080 at 23.976FPS
The “Check Project” shows no error. I build (output) as an image, then burn the *.ISO file using CyberLink Power2Go.
The BD-R work fine everywhere (LG & Toshiba player) except on my PS3. The BD-R has the BDMV and CERTIFICATE folder, so I don’t know why my PS3 don’t recognize it. And I have three PS3 at home; 1xPS3 80GB version (3yrs old) and 2xPS3 super slim (1yr old). All three are unable to see the BD-R. My PS3 work fine with all other media (games & movie Bluray); and I highly doubt that all three have trouble with the Bluray player.
I did the same process last time (in 2013) and everything is working fine, all the same configuration, except I used Adobe Encore CS4. My PS3 was able to read and recognize the BD-R. But since CS6, my PS3 don’t see the BD-R. I also put back the copy that I did last year with CS4 (just to make sure that is not a PS3 firmware issue) and the Bluray work fine. The media (Verbatim) come from the same tower (leftover from last year).
So everything point toward CS6…is there something that change from CS4 to CS6 for Bluray creation? Jumping from Encore CS4 to CS6, I don’t see anything different, but look like there is, because the Bluray can no longer be played on my PS3. Please help!
Toronto Montreal Wedding Photographer | one-blink Montreal & Toronto Wedding Photographer | one-blink photography

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Encore CS6 not loading under windows 8

I have purchased a new computer running windows 8. Everything runs fine in Creative Suite CS6, except that Encore will not load. Any thoughts?

>I have the same problem as Gregoryden and this worked.
>There's no error message for me. Encore just crashes as it starts up.
>That's what I was referring to in my first comment. Encore will run as Administrator
That that solves your problem... you Run as Administrator
Since gregoryden who started this discussion has never returned, we can only hope

Adobe After Effects CS4 will not load to Snow Leopard

Recently My hard drive crashed. I reloaded Snow Leopard on my computer and all of my support applications.
I attempted to load Adobe After Effects CS4, but it would not load.
I read where others had problems back in 2009.
Is there a fix for this problem?

Mmh, something is leaking. Are there any other Adobe products on the system that use MPEG CoDecs (Premiere, Encore, Adobe Media Encoder). If so, my best guess would be that those are not installed correctly or were messed up during an update or so. That stuff is shared by all apps and while your system is not ideal, it certainly should work and not give this error. Depending on what is going on, only a full re-install of everything might fix it, though, unfortunate as it may be. So make friends with the CS3 and CS4 Clean Scripts from the support pages, set aside a good afternoon and take some deep breaths...
Mylenium

"could not load any writer" when changing render settings?

When I change my render output settings from Quicktime Movie to something like H.264, I get an error saying "could not load any writer, adobe media encoder will now exit". Does anyone know how to fix this?
When I select Quicktime Movie then change the compression type to H.264, After Effects then tells me "for reliable output with H.264 compression, please choose it directly fro the Output Module..." which then puts me right back where I started with this posting.
Any suggestions?
Thanks!
Kristin.

@Kevin: The MPEG stuff being defunct should not affect fresh installs. So it's definitely some other app "stealing" the CoDecs. In what order are you installing? Perhaps having Nero, some DVD-player software or something similar inbetween? Did you deactivate the products before re-installing? what formatting options did you choose?
@kristin: As Jonas said, check QT. In addition, I would attempt yet another re-install, but this time taking care to really manually survey the progress. I'm suspecting that some of your files never get overwritten, so the config issue remains in place and your modules don't show up. So deactivate the app, uninstall it, run the CS3 clean scripts. Before re-installing, check your Library/Application Support/Adobe directory and the Preferences directory. Rip out any pieces that look suspicious and may be related to After Effects or Premiere/Encore, in particular MediaCore. Furthermore, remove any installer logs and remnants in the respective directories (Library/Logs, library/Application Support/Adobe/Installers). The packages are recognizable by their icon and the logs have the respective names of the product.
Mylenium

Photos not loading correctly, distorted colors, lines, etc.

So, my wife's Macbook is having a problem... it will not load pictures correctly in iPhoto or from the Finder. to give you an idea of what the pictures look like, see here:
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v1949/149/17/633596272/n63359627222288712218.jpg
Every time you remove the drive/ camera it will change how messed up it is, and sometimes the pictures come through fine... it's not the camera, as we have tried her old and new camera, and it loads fine on another computer, just not on hers.
She's got a macbook loaded with the latest version of the OS with all the updates... she is running an old (5.5 I think) version of iphoto, which could be a problem, but it's hard to say because they load wrong even if you do not open iphoto... the only way I can get the pictures to load correctly on her computer is by opening them from the image capture application... they open fine inside the program, but once you download the images to the computer, they look messed up again, like in the linked photo...
It definitely seems like a software related issue, maybe an incompatible codec associated with iphoto, or something else...
I've tried trashing the iphoto prefs, and I don't know how long ago this started and AFAIK, there hasn't been any software installed that should create a conflict...
Any ideas?
Thanks!
Will

I just moved quicktime components to the trash to where quicktime will not load or work at all,
What won’t “load or work at all”? Quicktime Player?
I don't think that all of the imaging on the computer goes through quicktime somehow, that is a bit ridiculous and far fetched to think that...
“ridiculous and far fetched”, like confusing QuickTime Player with the Quicktime technology? But what the heck, why don’t you explain to me how it all works then?
Regards
TD

CS4 media encoder will not load

I started having this problem on Saturday.
To begin with media encoder was not encoding properly, certain transitions were freezing in the final output.
Then it ceased to load altogether. I have rebooted, re-installed, gone back to a previous restore point (this crashed everything) and spent the best part of yesterday and today fixing it to the point where I am back to square one, despite a complete re-install.
When I load up media encoder either from premiere or standalone, it gets to the end of the splash screen and then comes up with this message "Adobe Media Encoder CS4 has encountered a problem and needs to close. We are sorry for the inconvenience."
I am at my wits end as I need to be able to encode my current project desperately.
S'funny because I tried installing it on my laptop, which has a lot less memory and a slower processor than this machine, and it worked. Only trouble is that machine has not the power to run premiere so I am still stuck
I am attaching the log file it wants to send each time it crashes incase that means anything.

Your text file is still queued, so I can't see it, but even then it would be doubtful it would be any help to solve your problem. The not loading message is most likely caused by another process running in the background, an incompatible codec in your material and/or project or a driver issue. You need to be far more specific with lots of extra details if you want our help. Look in the WIKI under troubleshooting and try all the suggested steps. If that does not help, answer the 16 questions at the bottom to start with.

Lessons not loading

Whenever I try to open a lesson, I get signs of activity and then nothing happens. The lesson does not load, but there is no crash. I have been through this post: http://discussions.apple.com/thread.jspa?threadID=1882820&tstart=210 and I still have the problem - I had not deactivated the font concerned.
If I try to load the lesson by double-clicking on the file, it eventually tells me that the file cannot be opened. Except I just tried again, with Activity Monitor running, to see if there were any clues there, and instead I quickly get a message "The operation could not be completed. No other information is available about the problem". Very helpful!
The MacBook is one of the new 2.4GHz Intel Core 2 Duo ones, with 2Gb of RAM, and the install of iLife 09 is a fresh one. I don't usually use the laptop for GarageBand, but I need to for the lessons - so the cruft is all on the G5 desktop! I have no Jam Packs, Soundfonts, Audio Units or anything else that did not come in the default installation. The only thing I have done is install the update via Software Updater. I have an M-Audio Keystation 49e USB keyboard attached.
The only other relevant oddness is that it's the Family pack of iLife 09. When I put it on the desktop (a dual 2GHz G5 tower with 4.5Gb of RAM), it installed about 5Gb of stuff (according to the installer), but only about 1.5Gb on the laptop. Is this difference normal between PowerPC and Intel machines?

MP4 is a wrapper, what is inside YOUR wrapper -Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Safari not loading particular web sites

Safari 5.1.7: Snow Leopard 10.6.8: MBP 2.53 Mid 2009: 8/500
For some reason, Safari does not load drudgereport.com or rushlimbaugh.com. This just started today.
Firefox has some problems too. Chrome loads both sites just fine.
Here is what I've done to try and remedy this in Safari - my browser of choice:
Re-Installed Safari
Deleted Drudge and Rush cookies
Reset Safari
Checked my fonts for duplicates (none found)
Restarted modem & Apple router (shut down for 1 minute +)
Ran applejack
Ran Coctail
De fragged hard drive
Shut down and restarted after a minute or two
Used terminal to find and enter the IP address. (host drudgerepord.com and host rushlimbaugh.com)
Limbaugh took me to Premier Radio Network and Drudge took me nowhere.
All the other sites I visit regularly load just fine.
Can't think of anything else.
UPDATE: I just spent 20 minutes trying to post my problem in an intelligent and comprehensive manner. But... just now I tried both sites again and they loaded fine. So, if you've read this far, I won't be wasting anyone's time. But I'm just going to leave this here anyway.

If you are using an Intel Machine, the 3.0 codec is not available - only for the older iMac machines. Have a look at this thread from the Real Player Forum.
Assuming you are using an Intel machine - To use the 3.0 codec, which is necessary to play the sound files you referenced, you would need to start Safari in Rosetta mode first.
Back to Real Player and your original question:
This is from Real Players on-line help data base:
When you install RealPlayer for Mac OS X, you are prompted to decide which types of files you want to open with it. RealPlayer becomes the default media player for the file types you choose to associate with it.
If you install another media program after installing RealPlayer, some of these file types may be associated with the new program.
To reassign these file types to RealPlayer:
Open RealPlayer for Mac OS X, click the RealPlayer menu, and choose Preferences. The Preferences box opens.
Select the Media Types category.
Select the file types you want RealPlayer to play by default, and then click Save Media Types. The changes will take affect after you restart RealPlayer.
If you are still experiencing problems, Safari may be overriding your choices. To reassign file-types for Safari:
Find one of the downloaded files in the Finder.
Hold the control key down and click on the file.
Select Get Info from the file's menu.
In the Open With area of the file's Info window, choose RealPlayer as the application.
Click Change All.
Follow the above instructions and post back.

Icwebclient not loading?

Hi Guys,
we just migrated from a 32bit sql 2000 environment to 64 bit servers.
We have imported ABA/BASIS support packs 55-62 to be able to upgrade to sql 2005.
We have copied profile parameters from old system. Now that system is up and running icwebclient is not loading.
When checking document.domain it shows up as the old domain what transaction we use to change the document domain? Also if you have any suggestion please let me know.
old document.domain = companyx.xxx.com
new document.domain=xxx.com
KG.

MP4 is a wrapper, what is inside YOUR wrapper -Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

HP Laserjet M2727nf - Firmware not loading to Printer

My printer display was not working so I ordered a new one. But as I read some postings it seems to be by formatter board. I baked the formatter board. After I baked it, the display would show: Hewitt Packard >>>>>. I did the below
but the firmware utility update is not going to the printer. The display shows ***BootDimm*** Ready 2 download.
I have left the jumper on and have taken it off to upload the firmware to the printer. Nothing has happened.   I have not even seen the display changing to erasing firmware, then programing firmware.
I baked the board and it started to work. I then Download the firmware utility update for my printer.  I Removed the printer left cover. Turned the printer on while it’s was connected by usb. Jumper or short the 2 pin connector - the display read "ready to load firmware". I heard the printer usb driver connect / initialize in windows-
Next I started the HP firmware update utility, select your printer from drop down list.   However the display did not change to erasing firmware, then programing firmware; finally it will display "firmware rom upload complete" - or something close to that. The computer did do this: the progress bar on the firmware update utility in windows completed and displayed the smiley face (about 3 min). Then I turned the printer off - unpluged it and disconnect the usb cable from the printer. It did not load. So where did I go wrong.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

Adobe photoshop will not load on computer???

i just got a new imac with tigar and the leopard update.
i updated to leopard as soon as i started the computer.
then i went to the adobe website and downloaded the trial version of photoshop cs3.
i installed it fine, but when i try to open PS, and error mesage tells me that the licence has ended and to reinstall. so i did, 4 times.
still nothing. what is the problem?
Thanks

i did not load anything on 10.4, when i goto the new imac, i just loaded 10.4 and then immediatly updated to 10.5. i have CS3 on my pc, so i just want to test CS3 on the new mac, to see which runs better. if i like it then i will buy the mac version. so far, my pc will surf the net about 3-4 times faster than the mac. i did not get the mac for net use, only for sound video and photo editing. but i do surf google for images.
right now i am trying to erase and reinstall OX S back to 10.4, then i will try to install CS3 again, then if it works, ill update to 10.5 and see if that works.

Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!

Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

Encore not loading codecs!!

Similar Messages

Maybe you are looking for