Encore not playing AVI clip the way it was made...

...I have a video with titles that are supposed to move closer to the viewer as they pop on screen. Now when I view it on my PPro 1.5 timeline it works great. When I view the avi on windows movie player, it plays great. When I put it into Encore the titles now hold still for a second or two and THEN move forward and fade out. Anyone else have a similar experience? How do we correct this? Any help is greatly apprecited.

Disable the "Optimize Stills" setting in PPro's project
and export settings and export the AVI file again. That will probably cure the problem.

Similar Messages

  • ITunes 10.4 not playing songs all the way through

    Hi all,
    I am having an issue with iTunes 64bit 10.4. My songs don't play all the way through, sometimes playing a few seconds before skipping to the next one and sometimes well into the song before skipping (without any predictable pattern even for the same song). It doesn't seem to be an issue with the transfer of music files from old computer to new computer b/c the same thing happens with new iTunes Store downloads and when I play music stored on my old computer through Home Sharing.
    Any ideas what may be causing this? Thanks for your help!
    Lenovo ideapad Y470
    Intel Core i5
    Windows 7 64 bit

    Same problem on my daughter's MacBook Pro that we bought last month. She started off with iTunes 10.4, upgraded to iTunes 10.7. Probably 64 bit, though I haven't checked. I think all the new Macs are obligatory 64 bit. The problem occurred with iT 10.4, and still happens with iT 10.7 So far, we have noticed the problem only on files transferred from an old computer. In particular, these are the m4p format, which are drm protected. It does not happen with all m4p files, though.
    1) In this incarnation, the problem is entirely reproducible. If the same track is played over, it skips to the next track at exactly the same point.
    2) The files are not corrupt. They can be played all the way through using Quicktime Player.
    Other than that, I haven't a clue.

  • What remedy might there be when I download music, an entire album, and a few of the songs do not play all of the way through.  They go so far and then jump to the next song.

    not sure if I'm doing this right...am I online with the community?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • HT201272 Songs/albums i purchased on iTunes do not play completely all the way to the end of the song. What happened? And what can I do to remedy this? I feel short-changed.

    What do I do please?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those incomplete songs from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

  • I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

    I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

    Try this:
    http://support.apple.com/kb/HT2519

  • I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get them but I got a 404 error. Can anyone help?

    I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get the proper codecs but I got a 404 error. Can anyone help?

    You can also use VLC
    http://www.videolan.org/vlc/download-macosx.htm
    It woks very well, can read almost anything, and also lets you do conversions to other formats.

  • My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
    The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
    As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
    1) You can add component support so that QT can play the files natively or
    2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
    Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

  • My 4G Ipod shuffle does not play songs in the correct order? Already restored to factory settings and no success.. Can anybody help me?

    My 4G Ipod shuffle does not play songs in the correct order? Already restored to factory settings and no success.. Can anybody help me?

    I FINALLY GOT IT! after months of relentless synching/autofilling problems on my 4th generation i figured out the solution.
    this is what i did: plugged in ipod on off mode~>manually deleting my ipod's songs~>restored factory settings~>unchecked automatic synch~>made a new playlist with exactly the songs & order i wanted for my ipod (just dragged old playlists into the new one)~>then autofilled that new playlist into my ipod. came out like a charm! (before u autofill UNCHECK random add songs)
    my ipod always ended up autofilling/synching my customized playlists wrong or it would automatically do my music library (and that was way unorganized), so this worked.

  • HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    See this previous discussion:
    https://discussions.apple.com/message/16962474#16962474

  • I have updated my phone to 4.3.3 and I was told there would be more bells and whistles. I haven't found more texting sounds. Have I updated my phone wrong or just not completed it all the way? Please help me. Still trying to figure this iphone 3G out.

    I have updated my phone to 4.3.3 and I was told there would be more bells and whistles. I haven't found more texting sounds. Have I updated my phone wrong or just not completed it all the way? Please help me. Still trying to figure this iphone 3G out.

    You have the iPhone 3GS, not the 3G. The last update to support the iPhone 3G is 4.2.1.
    iOS 4.3.3 includes bug fixes etc. There is nothing really special about this update that wasn't introduced in iOS 4.3. iOS 5 is the one to wait for - it will be released in the Autumn/Fall and includes over '200' new features/improvements.
    The additional text tines and ringtones were an iPhone 4-only feature.

  • HP Pavilion Slimline s3707c PC will not boot up all the way

    HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
    Entering Setup
    <F10=setup>                          <F11=System Recovery
    <Esc=Boot Menu>                 <F9=Diagnostics>
    Tried to install recovery disc; did not respond.
    [Personal Information Removed]

    Hi wjackson95,
    When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
    You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
    For more detailed boot troubleshooting, see this HP Support document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
    Let us know how it goes.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

    My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
    Thanks

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • After upgrading my iPhone to new 5.1 iOS, and reloading all of my files back in , my music appears to be in the phone, but when I press play, the music does not play, even though the pause button is now lit.

    After 6 hrs. Of upgrading to 5.1 iOS , and reloading all data my music will not play. The music was reloaded from iCloud, and shows up in library, but will not play.

    Basics from the manual are restrt, reset, restore.
    Have you tried each of these?

  • Is there video capture software which will capture only the canvas and not my cursor or the way I move the canvas?

    Hi,
    Does anybody know of a video capture software which only captures the canvas and not my cursor or the way I move the canvas?
    I want to simulate a painting being created brush stroke by brush stroke. It would also be good if I could select the layer that it is meant to be recording.
    I guess this would have to be a plugin of some sort.
    If not - do you have any good suggestions of the best workflow of creating this from Photoshop to After Effects (I don't want to use revealing paths etc...)
    Thanks for any help,
    Luke

    It would also be good if I could select the layer that it is meant to be recording.
    That won't work. Screen cap tools by their nature always capture the display buffer of the whole active window. At best, they respect GDI "drawing layers" and regions like Camtasia does, meaning they differntiate between mouse cursors, window frames and the actual content to get more efficient compression. For the rest - see the previous answer.
    Mylenium

Maybe you are looking for