Encore turning my 16:9 into 4:3

Encore is creating a 4:3 Monitor window, Preview, and DVD from my 16:9 Premiere sequence so that there ends up being black borders on the sides.  I'm using CS6.  Any solutions?

Thanks for replying!
In Encore, the Premiere sequence, when I right click on it and go to interpret footage, is automatically set at:  Use the asset's par:  sqare pixels (1.0).  Changing it to any of the other options doesn't appear to make a difference on the Monitor window or Preview window.
Regarding my footage, for some reason some of it, instead of being fullsize (4096 x 2160), is 3072 x 1620 or even smaller.  Anyway, I let Premiere Pro decide on the sequence settings based on the first piece of footage I put in the sequence, which was one of the fullsize clips.  The settings include square pixels 1.0.  By the way, I've (top and bottom) letterboxed the 16:9 sequence so that it's 2.35.
Any further thoughts?
Many thanks.
Dominic

Similar Messages

  • CAN I TURN MY MACBOOK PRO INTO A MONITOR?

    Help I want to turn my Macbook Pro into a monitor for my Playstation 2 so that way I can record on my screen using quicktime. please help I used a vga adapter from apple a AV to vga converter, and is their any way for me to use an iphone on a mac to play ios games while recording?

    I don't think you can without some sort of capture card (very expensive, and because most MacBook Pros don't have a card, you need to use the FW800).  MBP's Thunderbolt port only sends video signals out, you can't attach an HDMI to Mini DisplayPort cable from your camera to the MBP and expect to show video.
    You could try a utility like Sofortbild. 

  • I am trying to transfer my photos from old mac to new mac.  I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto.  It turned my 2000 photos into 12,000!!  What happened?

    And how do I turn off FACES? 

    I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto.  It turned my 2000 photos into 12,000!!
    According to you youo did not do what I instructed - you said you imported the old library into th enew library which can easily take a 2000 photo library and turn it into 12,000 including two ro three versions of each photo pus all the face thumbnails
    The correct procedure has NO importing involved
    drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac
    That is it
    LN

  • How to turn an animated .gif into a hyperlink

    Hey everyone,
    Im new to the forums and dreamweaver. I created an animated .gif file in photoshop that i want to use as an advertisement banner on a website. Now that the banner is created (on photoshop), I would like to turn the whole image into a link so that when someone clicks on it, it will redirect them to another website. How do I do this in dreamweaver??
    Any help is greatly appreciated!

    is JQ iweb compatible?
    jQuery is a very popular JavaScript library with which you can bring interactivity into web pages.  I know almost nothing about iWeb except that it is consumer level software for non-coders.  That said, if you can access the source code (HTML and CSS), you should be able to use jQuery plug-ins in your web pages.
    jQuery Cycle Plug-in (click on examples, view source in browser to see the code).
    http://jquery.malsup.com/cycle/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • How to turn my macbook pro into router via a usb dongle

    hello guys,,,
    would you please help me in this matter,,,
    how could i to turn my macbook pro into router via a usb dongle, in order for my other apple products can have internet connection too.
    im connected to the web via vodafone usb dongle.
    thank you!

    System Preferences>Sharing>Internet Sharing. Your MBP needs to be on all the time and not sleeping.

  • Is there a way to turn a text character into an image?

    Is it possible to turn a text character into an image/shape...using Pages or any other iLife or iWorks app?
    Reason being - I want to use a certain font and a character in it, but that particular font is not being recognized/shown properly by another computer. I want to make sure the text character shows up as I intend, and I figure the way to do that is by turning the text character into an image/shape (like a jpeg maybe? or a tiff or gif? I don't know too much about the difference between these last two). Then I can paste that image onto any background and have it still look like text laying on top of the background.
    Hope that makes sense, and many thanks in advance for any insights!

    Although it saves the text character as an image, it also saves the background (the white of the page) as part of that image. So when the character is pasted into a document whose background is anything other than white, it doesn't look like a simple text character anymore. It looks like a white box with a text character in it. You know what I mean?
    I'm thinking I might need to use whole 'nother graphics program to do this whole deal...what do you think?
    Rather than using Preview, create the new image from the clipboard in GraphicConverter & use the transparency wand to make the background transparent. Then use ⌘ E to select just the image & save, choosing to save just the selection.

  • How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

    How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
    I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
    I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

    You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
    There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
    http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
    Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
    I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
    -Mark

  • The keyboard shortcut that turns an exclamation mark into an apostrophe no longer works in iOS 6. How can I restore that shortcut?

    the keyboard shortcut that turns an exclamation mark into an apostrophe no longer works in iOS 6. How can I restore that shortcut?

    Well, I for one really hate when they change this stuff.  They get us used to doing it one way for years and then they change it.  Why?  Really, seriously, truly......WHY?
    In fact, I originally noticed it had changed and then when I'd hit it, I thought it required me to touch both so I ended up with an apostrophe but then also a letter "l".  I just left commas everywhere I went for a while cuz it ticked me off so bad I just rebelled.
    In ios5 it was actually faster because it's the same move and time involved, but without the extra "slide".  So, in essence, Apple went backwards.
    Nice, eh?

  • Turn My iPhone 4 into an iPod Touch?

    Hi,
    I'm sorry if this question has been asked (seems like it would be a fairly common question). I've used the search feature, as well as Google, but most of the threads/answers I've found seem to be "one-off" type of questions that don't really address the general issue.
    Anyway, I had an iPhone 4. I just bought a new iPhone 5s. I simply want to turn the iPhone 4 into an iPod touch so that I can continue to use it to listen to music and podcasts while I'm exercising (seems like a better option than to risk dropping my brand new iPhone). What do I need to do this? Do I need to remove the SIM card? If so, how do I do this?
    Thanks.

    Hi All,
    I too have a question on this. I have upgraded to the 5s and want to give my iphone 4 to my daughter to use as an ipod touch with no sim. I'm having difficulty setting up imessage and facetime on the device? I've followed a few posts an have erased all contents and all settings, put the old sim in (it is still active with network), set the phone up using itunes account with sim in with no success.... Waiting for activation...... is the status
    You could/can use imessage and facetime on my old ipod touch so am I right in thinking that you can also do this with the iphone 4 with no sim?
    If so how..............

  • Can I turn my ID document into a true e-newsletter similar to Mail Chimp or My Emma?

    Can I turn my ID document into a true e-newsletter similar to Mail Chimp or My Emma?

    Can I turn my ID document into a true e-newsletter similar to Mail Chimp or My Emma?

  • Can i turn my airport express into a switch?

    Can i turn my airport express into a switch?

    A switch is a device with multiple Ethernet ports...and the AirPort Express has only one.
    Can you clarify how you would plan to use the AirPort Express as a "switch"?

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • How do yo turn a pdf file into reader so i can edit the form?

    how do yo turn a pdf file into reader so i can edit the form?

    I have no idea what you are trying to say; your are trying to open a PDF with Reader?

  • How to turn a pdf file into excel document and keep original format

    I Have an excel bid form that i use all the time ,then i convert it into a PDF  And once in a while i need to add something to it  I paid for acrobat but when i try to turn the PDF back into an excel document the format is changed , the columns are in the wrong places And it does not look at all like the original excell form is there any thing i can do to  fix this If not this will be useless to me  any help appreciated

    A PDF does not contain any spreadsheet, word processing or page layout file format information.
    No "format", columns, rows, etc.
    "When you create a PDF, you’re painting a picture. Your paintbrush is the is the result of a combination of the software used to create the source document and the software you’ve chosen to convert your source document into the universal electronic document format we all know as PDF.
    Like the painter’s brushstrokes, each character, each line and each image is fundamentally independent, but they can interact with each other to produce particular visual effects. On the PDF page, objects are connected by a coordinate system and not a lot else. There’s no logical, semantic connection between the letters comprising a word; characters simply happen at a series of locations on the rendered page.
    As originally designed, PDF is fundamentally a system for painting objects onto a page, plus a whole lot of other features we aren’t talking about right now! There’s no innate concept of words, sentences, paragraphs, columns, headings, images, tables, lists, footnotes – any of the semantic structures that distinguish a “document” from a meaningless heap of letters, shapes and colors. PDF is fundamentally about how the document appears on the page, not how it looks when abstracted from the page."
    Duff Johnson, Each PDF Page Is a Painting
    http://talkingpdf.org/each-pdf-page-is-a-painting/ 
    Be well...

  • Hello! I would like to know the procedure to turn a word document into a PDF document via Adobe Reader.

    Hello! I would like to know the procedure to turn a word document into a PDF document via Adobe Reader. Do I have to pay for it or just sign up? Thank you in advance.

    "...the procedure to turn a word document into a PDF document via Adobe Reader." 
    Not possible.
    No version of Adobe Reader can:
    --| create PDF 
    --| manipulate PDF page content  
    --| export PDF page content
    Adobe Reader XI does provide a "connection" to various Adobe hosted online subscription services (that are under "acrobat.com").
    There is a subscription services can create PDF from supported file formats that are uploaded to the service.
    This subscription service is "PDF Pack".
    With an active (paid up) subscription to a service one can make use of the service.
    Be well...

Maybe you are looking for