Encore WT8 - screen Mirroring on TV does not work

Hello,
I have a KDL42-W653A television which supports screen mirroring over WiFi.
However, I cannot get it to work with the Toshiba Encore W8 tablet.
The tablet detects the television, I enter the number, but the television never shows the tablet's screen.
Both the television and the tablet are on the latest firmware.
Another thread indicates there is an update for HDMI in January. I hope that covers this too.
Anwar

Hi
> I have a KDL42-W653A television which supports screen mirroring over WiFi.
By mirroring over WiFi what technology you mean exactly?
Miracast, Intel WiDi, DisplayLink?
Toshiba Encore supports *Miracast*
To use Miracase both devices needs to support this technology.
Then you can connect to external display very easy:
Tab Settings -> Change PC settings -> PC and devices -> Devices
Here you have to Add a device and you tablet will start searching for a Miracast devices
After the connection has been established, the name of the Miracast device will appear under Projectors
Did you test the video output connecting the table to the TV with an micro-HDMI cable?
Does it work?
Here is also an nice youtube video about the Toshiba Encore WT8 screen output options
http://www.youtube.com/watch?v=kBmInOnrS2U

Similar Messages

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4061 iphone 3GS screen locked, slide bar does not work

Iphone 3GS. The slide bar does not work, ie the screen lock does not unlock. I have tried to reset (power and home buttons) and also to restore my iphone several times using iTunes without any success. Any suggestions? My son uses the phone now for games, so it has no carrier.

A reset can be done by tapping and holding the Home button and the Sleep/On/Off buttons at the same time for approximately 10-15 seconds, until the Apple logo reappears.
Stedman

Encore WT8-A - External monitor doesn't not work

Hi all,
I have problem, when I connect an external monitor to Toshiba Encore WT8-A with an HDMI cable, Windows does not recognize it. I tried to use monitors from Samsung, Philips and LG.I use a standard HDMI cable. The cable is OK tested on other devices.
win 8.1 (all updates)
bios 1.6
All the drivers used from the Toshiba Service Station
Thank you for help.
RM

Hello gaizkot,
We've an article that can help get your MacBook Air and your display working together.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Full screen auto-hide feature does not work with Adobe Acrobat Reader add-on 11.0.0.379 in Firefox 17.01.

"Full screen" menu item and its keyboard short cut F11 stop working with Acrobat Reader. The Firefox top edge border does not hide once you have moved around in the Acrobat document. Therefore it is not possible to display PDF documents in a true full screen mode within Firefox. The auto-hide full screen mode works nicely with other Firefox windows, so apparently the Acrobat Reader add-on breaks the feature. Windows 7 64-bit.

From the JS API Reference of the print method:
Non-interactive printing can only be executed during batch, console, and menu
events.
Outside of batch, console, and menu events, the values of bUI and of interactive are ignored
and a print dialog box will always be presented.

IPhone 5 frozen on black screen but "hard restart does not work

My iPhone 5 is frozen on a black screen and buzzes when i plug it in but when i connect it to my computer to attempt to reset it on iTunes, it does not appear on my computer. I tried a "hard restart" but my sleep/wake button is broken can anyone help

Hello there, vsanfilippo2.
If you're iOS device isn't recognized at all on your computer, then the following Knowledge Base articles provide some great troubleshooting steps to follow, depending on the Operating System running on your computer:
iOS: Device not recognized in iTunes for OS X - Apple Support
or
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

N580 white screen, external display also does not work

I have an N580 that I purchased about 9 months ago. Last night, the screen went completely white, and upon reboot, the screen instantly comes up white.
After trying many of the troubleshooting steps seen throughout the interwebs for this, I tried plugging the VGA into a known good external monitor, but the LCD remains white, and Function F7 does not switch the display over to the external monitor.
I am thinking that this must be the graphics chip, as the backlighting still seems to work, and the display won't transfer to external monitor.
Any other suggestions?
Also, what are my options seeing that this is within the 1 year warranty?

Dear oviyach,
Welcome to Lenovo Community,
There are some simple Troubleshooting steps that you can try.
1)     Completely shut down the machine.
2)     Remove the Battery.
3)     Remove the Charger / AC Adaptor.
4)     Press and Hold on the Power Button for 20 continues Seconds.
5)     Connect the Charger / AC Adaptor.
6)     Press and Hold on the Power Button for 10 continues Seconds.
7)     Press The Power Button once and check please if you still have the White Screen issue.
This procedure is used to discharge any extra charge in the mother board. Please try this solution and if the problem still exists, just tell me know.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My screen z1 crashed and does not work only touch the buttons below

I had my phone in my back pocket and I was driving and when I get to my destination , I realized that the screen had crashed , , and now only the buttons below function , do not understand how they work only 3 buttons, the damage screen is on the inside, not the outside in help¡

@zamora07
Replacing the LCD it's quite simple, just requires a lot of work and the correct tools, keep in mind that doing so will void your warranty and your phone might not be waterproof after this.
this is how to replace the LCD
video
https://www.youtube.com/watch?v=SvJKVxfKqFc
step by step picture
http://www.xperiablog.net/2013/09/15/xperia-z1-disassembly-guide/
You will need to buy a new LCD/Digitizer
http://www.ebay.com/itm/like/131214968274?lpid=82&chn=ps
http://www.smartphonebay.net/LCD-Screen-for-Sony-Xperia-Z1-p/lcdp-syz1.htm?gclid=Cj0KEQjw-OCqBRDXmIW...
https://www.strivemobile.com/sony-xperia-z-lcd-touch-screen-assembly-replacement?gclid=Cj0KEQjw-OCqB...
and TWO double sided tape
http://www.ebay.com/itm/like/331105420623?lpid=82&chn=ps
one for the bacak pannel and another for the new LCD
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

My iPod nano (newest version) screen lights up but does not work how can I fix this?

Need help please!!
I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers.
Does anyone know how to fix this?
Any help would be greatly appreciated,
Thank you for your time

Did you already try to reset the iPod?
How to reset an iPod nano (6th generation)
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.

HT1414 The screen is non responsive, does not work to touch. I have restored it 3 times now. Is there a permanent solution to this problem ? We have a total of 6 Ipods in this house not including Iphones. I keep loosing purchased apps!!!

This is the 3rd time in less than 2 months that I need to restore my Ipod 3rd gen because it does not respond to touch commands. What can I do to resolve this problem ?

If it keeps happening after restoring to factory settings/new iPod (not from backup) that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Mirroring to AppleTV does not work, sound works, but no video. How do I fix this?

I have a new Macbook Pro, and I am unable to mirror to my AppleTV, 2nd generation. I can play music from the Macbook through my AppleTV, but I am unable to mirror. I click the button to mirror, but a blue screen breifly pops on on the computer, then the TV goes black. How do I fix this?
Thank you.

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

X1 carbon - On screen display (brightness) does not work anymore..

I have an X1 Carbon.
Usually when i raise or decrease the screen brightness i had an on screen indicator showing me how much i decreased ot increasing either of the obove.. Now, when i do the same actions nothing apears.. can any one give me a hand?
thanks
Moderator Note: Edited subject to match content.

Hi Joben,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with on screen Display on ThinkPad X1 Carbon.
Please check if the you have enabled on-screen display option in graphic properties. Please click here to know the steps for enabling on-screen display.
If the issue still persists then I suggest you to update Power Manager, Power management and Hot key feature applications.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Closed connection in stalled screen sharing and now does not work

Using screen sharing I created a second admin account on the computer 2. I enabled quick account switching and tried to switch user accounts to the new admin account. I linked the new admin account to be shared with my existing admin account on computer 1. The screen never switched over to my new admin account and I couldn't quit screen sharing so I closed the connection with computer 2. Now I can't share the screen with computer 2 at all, even using my original admin account (not the newly created one). I can't reboot my computers because it will abort jobs that need to remain running.
I can still share screens between computer 1 and other computers (i.e. not computer 2) but when I try to share with computer 2, it doesn't even ask me to log in.

This issue remains unresolved, but since Apple Discussions decided to archive my question it is impossible to receive any replies.
GRR.

Encore WT8 - screen Mirroring on TV does not work

Similar Messages

Maybe you are looking for