Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

Similar Messages

We encountered a problem during use the Configtool access JAVA engine.

We encountered a problem during use the Configtool access JAVA engine.
Our environment of system as below:
HardWard: IBM i570
OS: IBM as/400 V5E3
DB: DB2/400
Application system:SAP XI 3.0
The problem we encountered as below:
Our company used XI 3.0 SR1 for exchange data between SAP R/3 and no-sap system.For now,we wanna create a backup system(for
offline recovery),so we backup the XI product system throught entiry system save in AS/400(we stopped the XI system before
save process start).And following,we restored from the tape that we save from XI product system to the new backup system(they
are whole different paratition),but the problem is coming.Describe as following item:
1. The application seem to can be started but the java node always restart circularly(We have 4 java node now),I think
because of different of hardware configure(between XI product and Backup system) and lack of hardware resource.(XI prduction
have 5 CPUs and 22G Mem,Backup system have 2 CPUs and 16G MEM ).Therefore we wanna decrease the number of java nodes for
start application in backup system(throught configtool).
2. We wanna use configtool to decrease the java nodes for start backup system.But we encountered a problem during running the
configtool ,the information of prompt dialog as following:
Error occurred while working with Configuration (Scanning).
Msg:Error while connecting to DB.
We also see the system.log that below the directory of usr\sap\PXI\DVEBMGS00\j2ee\configtool,and found some error as
following text:
#1.5#C0000A0008A8000000000000017A906E000423BFFC7246E0#1165207387826#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS
[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5#C0000A0008A8000000000001017A906E000423BFFC73A670#1165207388006#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jce_export.jar#
#1.5#C0000A0008A8000000000002017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jsse.jar#
#1.5#C0000A0008A8000000000003017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_smime.jar#
#1.5#C0000A0008A8000000000004017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_ssl.jar#
#1.5#C0000A0008A8000000000005017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
w3c_http.jar#
#1.5#C0000A0008A8000000000006017A906E000423BFFC9C25A0#1165207390660#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStore
FSResources#
#1.5#C0000A0008A8000000000007017A906E000423BFFC9C4CB0#1165207390670#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5#C0000A0008A8000000000008017A906E000423BFFCAC7D38#1165207391731#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure
store.#
#1.5#C0000A0008A8000000000009017A906E000423BFFCDA3070#1165207394726#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5#C0000A0008A800000000000A017A906E000423BFFCDB41E0#1165207394796#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnect
ionFactory#######Thread[main,5,main]
##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error
occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester
cannot establish the connection. (XIPRD)#jdbc:as400://XIPRD/SAPPXIDB;transaction isolation=read uncommitted;data
truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor
hold=false#<null>#
The "SQL error occurred on connection" happened during start run configtool.
We don't know how to solve this problem.
Thanks

I am unable to start my configtool.bat to administer JVM memory settings for my J2EE.
Wait......
Thanks

Workflow problem during upgrade ?

Hi,
We are Upgrading the system from 4.6C to ECC6.0.
What kind of general problem will happen to workflow during upgrade?
So that we would take necessary precautions.
Thanks!
Richard A

Hi Richard,
The following document is a very useful source of information for upgrading to ECC 6.0:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/103b1a61-294f-2a10-6491-9827479d0bf1
Best Regards,
Trevor

Problem during upgrade

Hello,
I'm in a process of upgrading R/3 4.6c system to ecc6.
the upgrade is ran on windows server 2003 with sql server 2000.
during the upgrade in phase - parconv_upg(already passed phase
modprof_trans) the upgrade process stops with the following error -
MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990814.ELP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EETP345 17:36:33: Retcode 1: SQL-error "2705-Column names in each
table must be unique. Column nam
2EETP345 e 'J_SC_SUBCONTYPE' in table 'LFB1' is specified more than
once." in DDL statement for "LF
2EETP345 B1 "
2EETP334 17:36:33: error in DDL, nametab for "LFB1" not activated
1 ETP111 exit code : "8"
i can't go into the system since it is locked (as mentioned earlier - i
already passed phase modprof_trans).the above error appeared in
parconv.elg log file.
please assist asap since this stops the upgrade process.
please let me know if you need to connect to my system - the only way
to connect to the system will be to the server itself - since as
mentioned before - the system is locked by the upgrade process.
Kind regards,
Moshe

Do you have a special addon installed (Asian Best Practice)?
Markus

Problem during Upgrade 10.2.0.4

Hi Gurus !!!
During upgrade from 9.2 to 10.2 we have install 10.2.0.4 patches and now we are ready to call dbua (upgrade assistant).
When we call dbua an error occurs :
./dbua
Error message
Failed to load Main Class: oracle.sysman.assistants.dbma.Dbma
We've check enviroments variables and all are Ok.
Any ideas ?
Thanks in advance.

Hi Xavier Canals Asin,
You also need to set the JAVA_HOME environment variable.
For unix after login to the oraSID user
setenv JAVA_HOME /opt/java1.4(java location may differ check in ur system)
then check the version of the java with command java -version
if still you are getting the error
check the metalink
Exception in thread "main" java.lang.NoClassDefFoundError [ID 359067.1]
If still it is not working please reply back to me.
Thanks,
Chaitanya

Problem during upgrade of 7.4.1 and now i cant open ITUNES!!!!!

OK so theres the upgrade box popping up. I decide of course ill update now. I click download.... and while im on the internet later on . Something appears saying a problem happened with something to do with the windows... that took 2.mb and the other upgrade took like 50mb. Since it still continued installing i allowed it. Then after it. I exited itunes to see the new features. I click on it and... i get an error saying * Itunes cannot open because it is missing some files. Please reinstall. * IM a lil irritated that an update did that. But wat the **** i just reinstalled and then... while unistalling the same box appears. i X it and the unistallation finishes.
when i restart i install it again( this was my old version 7.1) and during the installation the same stupid box appeared. but the installation continued. When it was finished i took my mouse clicked on itunes and....
THE STUPID BOX IS BACK!!!!!! reinstalling did not help. This ***** i need my musiuc and thats like 800songs that will only work with itunes. PLEASE HELP

omg. I download the new version off the site and now it works. Sorry . This problem was resolved about 30 seconds after i posted it XD

Problem during installing sap Netweaver abap 2007s Trial

Hello,
I hope somebody could help me:
I tried to install the 2007 on my server (Windows XP SP2). But the installation stops at 17% when installing the maxDB.(Preparing Packages for installation).There's the error log:
INSTALLER_INFO: Version = 7.6.04 Build 001-003-153-115
INSTALLER_INFO: Changelist = 000000
INSTALLER_INFO: MakeId = 000000
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = Server
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 2
CALL: SDBINST -t sapmds -f C:/sapdb/NSP/_tempLocation/sapmds.txt -p DBNAME=NSP -p SOFTWAREPATH=C:/sapdb -p INSTANCEBACKUP=C:/sapdb/NSP/_tempLocation/load/load_datasave -b
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
STDOUT:
     Installation of MaxDB Software
STDOUT:      *******************************
STDOUT: starting installation Tu, Aug 21, 2007 at 15:32:14
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 2
STDOUT: callers working directory: D:/NetWeaver SAPNW7.0/SAPNW7.0ABAPTrialSP12/SAPNW7.0ABAPTrialSP12/image
STDOUT: installer directory: C:/sapdb/NSP/_tempLocation
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
STDOUT: archive directory: C:/sapdb/NSP/_tempLocation
STDOUT:
debug package SDBBAS.SDB not found
debug package SDBKRN.SDB not found
debug package SDBUTL.SDB not found
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
STDERR:
One or more validation errors occured:
PARAMETER     ERRORMESSAGE
=========     ============
DBNAME     Instance already exists
Database NSP must not exist
STDERR: installation exited abnormally at Tu, Aug 21, 2007 at 15:32:22
Any help?
Message was edited by:
        Robert Karlovic
Message was edited by:
        Robert Karlovic

There was an older version (2004). Unfortunately I forgot to uninstall everything properly. I already uninstalled and deleted the old system and registry keys with this regCleaning tool(and deleting regs manually including a reg of SAP DBtech).
I've read several times that you should install the sneak preview on a "fresh installed" OS, to prevent errors during the installation.
Is there any way to install the 2007s without reinstalling a new OS?
*****Update:
Problems fixed! Server installation was successfully and the server is running and reachable.
The problem was that there was some stopped services of the older trial version(that I deleted manually in the regedit).
Message was edited by:
        Robert Karlovic

Installation problem during install SAP R/3

During my installation of SAP R/3 which appear some error messages that:
" INFO 2007-07-07 14:15:50
Changed working directory to C:\SAPinst ORACLE SAPINST.
PHASE 2007-07-07 14:15:57
Prepare SAP System Instance
PHASE 2007-07-07 14:15:57
Create a temporary license for SAP System
INFO 2007-07-07 14:15:58
Creating file C:\SAPinst ORACLE SAPINST\saplicense.log.
INFO 2007-07-07 14:15:58
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2007-07-07 14:16:03
<b>See 'C:\usr\sap\S01\SYS\exe\run/saplicense -R3Setup S01 "SQ7LTH48" TRACE=2' output in 'C:\SAPinst ORACLE SAPINST\saplicense.log</b>'.
ERROR 2007-07-07 14:16:03 "
Anbody can tell me what is the problems? In this stage, I think the computer name(host name) of server(WIN2K3) have more than five caracters, so that the NETBISO of SAP R/3 cannot detect more than five caracters host name.

Hi,
<b>SAP R/3 cannot detect more than five caracters host name.</b>
SAP R/3 does support host name up to 20 characters as per the following tables.
/BDL/TRHOSTS - Host names changed by the customer
MECONFIG_J2EE - Host Name and Port of J2EE Engine for MI
BSPHOST - Mapping Table for Host Names and Ports in BSP
Post your query either in the following forums to get efficient answers.
Application Server Forum:
/community [original link is broken]
Database and Operating System Forum:
/community [original link is broken]4
Regards,
Naveen.

TP version problem during upgrade from 4.7 sr2 to ECC6

Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
   #====================================================#
Requests and information for module Initialization #
   #====================================================#
ERROR:   The upgrade needs a patched version of R3trans which is
         build on 21.06.06 or later.
         The R3trans in your active SAP kernel is either older or
         the version could not be determined. Call it without
         any option to determine the build date.
         If the build date is too old, you have to replace it
         before you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
INFO:    The version check of the disp+work in your active SAP kernel
        determined that it has a sufficient level.
         No update of disp+work is necessary.
ERROR:   The upgrade needs a patched version of tp with version
         number 340.16.05 or higher.
         The tp in your active SAP kernel is either older or the
         version could not be determined. Call it without any option
         to determine the version.
         If the version is too old, you have to replace it before
         you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
       the ST-PI software component with at least Support Package Level 8
      After the update is done, the module must be repeated!
       For more information, see the upgrade documentation
INFO:       The upgrade strategy for the addon ABA_PLUS
            is described in note: 632429
INFO:       The upgrade strategy for the addon APPINT
            is described in note: 632429
INFO:       The upgrade strategy for the addon BP-R3PF
            is described in note: 632429
INFO:       The upgrade strategy for the addon FINBASIS
            is described in note: 438521
INFO:       The upgrade strategy for the addon LSO
            is described in note: 503468
INFO:       The upgrade strategy for the addon LSOFE
            is described in note: 503907
INFO:       The upgrade strategy for the addon PI
            is described in note: 700779
INFO:       The upgrade strategy for the addon PI_BASIS
            is described in note: 555060
INFO:       The upgrade strategy for the addon SLL_PI
            is described in note: 1306751
INFO:       The upgrade strategy for the addon ST-A/PI
            is described in note: 69455
INFO:       The upgrade strategy for the addon ST-PI
            is described in note: 539977
INFO:       The upgrade strategy for the addon WP-PI
            is described in note: 632429
   #===========================================================#
PREPARE module Initialization finished with status failed #
   #===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
Mani

Hi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia

Problem during upgrade from 10g R1 to R2 - background color

We are using Oracle 10g Forms , where we will have date and time display in every page of the form. Now we have upgraded the version from 10g R1 to R2.
In R1 , when the date&time flickers the background color will be in white color.
But in R2, when the date&time flickers the background color is in Grey color.
How to change the background color back to white. the date & time display calls the jar file to display the time. No change in the jar file.. I have changed the background color in the property palette of the date&time as white.. but still the problem exist..
Any suggestions or solutions , plsssss.......

In R2:
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = self;</SCRIPT>
# HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=frmall.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
In R1 :
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar
# heartBeat 8/16/2006 czlapinski
# heartBeat changed to 30 8/29/2006 czlapinski
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
Using the same Jinitator version , but the version for jpi differs.

Problem during Upgradation from 9.2.0.6 to 9.2.0.8 in production.URGENT!

Hi ,
Let me give you some background..
we were sailing well with our 9.2.0.6 version in Sun 64 SPARC for our Data Warehouse till we hit what is called one million bug!! Segement and extent does not match!! In order to get rid of it we decided to upgrade our Production database from 9.2.0.6 to 9.2.0.8.We tested first in Stage and it was running fine all our ETL job was running without any issues.Then we tried changing some parameter as given below
Parallel_automatic_tuning set to false
parallel_max_server set to 64 from 160.
After making this change we hit a bug in stage which we resolved by applying the patch 5523799.This bug says that oracle gets hit with
ORA-600 [KCBGTCR_3] AND ORA-600 [KCBGTCR_12] WHEN DOING OWB MAPPING
But in production even with this patch applied we are unable to make select count(*). One mistake what what we did,which makes the stage and production processes different is that while making parameter changes in production we changed
parallel_max_server set to 64 from 160 keeping
Parallel_automatic_tuning set to true!!
Then we truncated a Master table with 8 million rows through a job before we realized the mistake.But now nothing is working!! Do you have any idea how to fix the issue.
If you need anymore information please let me know.
I appreciate your helping hands.
AD

First off, note that a number of folks around here intentionally avoid posts marked "urgent"-- that's generally considered impolite. Others avoid threads that are cross-posted in multiple forums. Either of those could slow down responses...
What does "unable to make select count(*)" mean? Are you getting an error in prod? Is it the same error you're getting in staging?
Normally, urgent production issues, particularly those that seem to be related to a particular Oracle bug, need to be dealt with by Oracle support. Unless someone here happens to have dealt with this very particular scenario, the best we could do would be to try to read the same Metalink notes you're probably already reading to try to come up with suggestions. In the end, though, it's likely that Oracle Support will need to be involved to figure out what the safe options are.
Also, please understand that we're all volunteers here, so certain types of issues are just outside the scope of what anyone here is likely to be able to help with. I'm more than happy to spend hours reading Metalink notes, building test systems, and testing approaches to resolve issues for a client when I understand the systems in place (and where my hours are billable). I, and most of the other folks around here, can't generally commit that sort of time for free to resolve very specific errors on production systems we don't understand. Even if we had the time, OTN isn't an ideal forum for the sort of back-and-forth that would be necessary before anyone could responsibly suggest changes to make to a production system.
Of course, someone may come along that has hit exactly the bug you've hit and happens to know of a quick and easy solution. If there is no Metalink note that is directly on point, though, I'd tend to doubt that the perfect person will come along, certainly not in the very near term.
Justin

Idoc problem during upgrade from 4.0 to 4.6c

Hi All,
Currently we are upgrading our system from 4.0 to 4.6c.
We uses Basic idoc type DELVRY01:it has so many segments which have new definition now in 4.6c, for example segment E1EDL20:- new definition of this segemnt has 3 new extra fields in 4.6c.
Now due to it, whenever we are creating an idoc in 4.6c it comes with extra fields in them.
But after upgrade we want our idoc fields to be same as it was in 4.0.
How we can do it i.e creating an idoc in 4.6c but using the same segment definition used in 4.0.
Thanking in advance.
Nazir.

Hi Martin,
Thanks for the reply.
I even put the Seg Rel as 40A in partner profile, but after idoc creation it comes with extra fields only.
Is there anyother setting that needs to be change ?
Nazir.

OLE problem during upgrade

It is still unsolved mystery.
Why OLE is not working after upgarde??
Pls check below thread & I have same problem.
My prog run fine in 46C but in ECC60..it's open MSWORD but did not include table.
I have done & checked all config settings related to SOLE. I thought it could be issue with SAPGUI since we have 620 but then why is running in 46C?
OLE: ms word (Textbox)
Any one has any idea?
Thanks,
Arpit

Pls see below code....
System is failing at bold statements.
FORM CALL_MSWORD.
DATA: WORDOBJ TYPE OLE2_OBJECT,
I TYPE I.
DESCRIBE TABLE ADRS_DATA LINES SY-TABIX.
CHECK SY-TABIX GT 0.
CREATE OBJECT WORDOBJ 'Word.Basic' .
CALL METHOD OF WORDOBJ 'FileNew' EXPORTING #1 = 'normal.dot'.
CALL METHOD OF WORDOBJ 'AppShow'.
<b>CALL METHOD OF WORDOBJ
'ToolsCreateLabels'
EXPORTING #1 = '0'
#2 = PETTY
#3 = PETNO
#4 = '0'
#5 = '0'
#6 = '0'.
</b>IF NOT PETFT IS INITIAL.
CALL METHOD OF WORDOBJ
'Font' "WBIK018729
'Schriftart' "WBIK018729
EXPORTING #1 = PETFT
#2 = PETCS.
ENDIF.
DO PSKET TIMES.
CALL METHOD OF WORDOBJ 'NextCell'.
ENDDO.
LOOP AT ADRS_DATA.
IF SY-TABIX NE 1 AND ADRS_DATA-XFELD EQ 'X'.
CALL METHOD OF WORDOBJ 'NextCell'.
IF NOT PETFT IS INITIAL.
CALL METHOD OF WORDOBJ
'Schriftart' "WBIK018729
'Font' "WBIK018729
EXPORTING #1 = PETFT
#2 = PETCS.
ENDIF.
ENDIF.
<b>
CALL METHOD OF WORDOBJ 'Insert' EXPORTING #1 = ADRS_DATA-LINE.
CALL METHOD OF WORDOBJ 'InsertPara'.
</b>
ENDLOOP.
ENDFORM. " CALL_MSWORD
Any clue??
I tried all ways..
Message was edited by:
Arpit Nigam
I solved the problem. Hence I am closing it.
Message was edited by:
Arpit Nigam

Problems during upgrade

itunes not detecting iPod touch after iOS5 upgrade.

Hi,
without ICM running, you cannot run webreports.
to start ICM you can just do it from SMICM transaction.
Check with your basis people whether they have configured the system to enable ICM, http port ,etc.
Hope this helps
Regards
Pavan Prakhya

Problems during upgrading to iOS6-error 1602

I just tried to upgrade to iOS6 on my iPhone 4S, but just after being prompted that it will be transferred to the phone, an error 1602 interrupted it and now there's no communication between my phone and Windows 7 computer what so ever. My phone isn't responding as well with only a picture of a USB cable pointing to a iTunes icon on the phones' display?

It's just giving nothing, it's as though it's not even existing to the computer. I tried another USB port but it stays the same.Every now and then it turns off and on again, but with the same display of the cable and icon! I upgraded iTunes in the meantime and checked at my Coputers devices and there it states "recovery mode". But still iTunes doesn't pick it up?

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Similar Messages

Maybe you are looking for