Encountered an error while activating

Hi!
cant authorize my ipad air. Error appears "encountered an error while activating"

Please quit ADE app, relaunch ADE again.
Now try to authorize.

Similar Messages

Run Time error while activating the cube 0pp_c03

Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
Rohit

Hi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa.

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while Activating Inventory record in WM

Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVK

I am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated.

The test encountered an error while signing in to Outlook Web App. HTTP code: 200

Infrastructure: Exchange 2010 SP3 RU2 environment on 17 servers worldwide with CAS, MB, HUB and UM roles. Server 2008 R2 VM's on Hyper-V 2008 R2.
Trying to run the following command to test OWA connectivity on a server in the same Active Directory domain but in a different AD site:
Get-ClientAccessServer -Identity Server1 | test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate
I get the reponse:
WARNING: [11:04:51.276] : An Outlook Web App page wasn't received.
WARNING: [11:04:51.276] : The test encountered an error while signing in to Outlook Web App.
HTTP code: 200
WARNING: [11:04:51.276] : Test failed for URL 'https://server1.domain.com/owa/'.
ClientAccessServer        MailboxServer            URL
Scenario       Result       Latency          Error
Server1.domain.com      Server2.domain.com  https://server1.domain.com/owa  Logon           Failure
The test encountered an error while signing in to Outlook Web App. HTTP code: 200
This is the same error message received from SCOM on its tests also.
I have created a test account on all 17 servers using ./new-TestCasConnectivityUser and ensured their mailboxes reside on the correct server in the correct database.
All internal servers are set for OWA and ECP for Windows Authentication. Only public facing CAS servers are set to Forms based. That said, have checked the 'Microsoft Exchange Forms-Based Authentication service' is running on both Server1 and Server2 as
are all Exchange services except 'Microsoft Exchange IMAP4' (not used) or 'Microsoft Exchange POP3' (not used).
However, if I run this command:
test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate -URL
https://server1.domain.com/owa
I get the following success after I have entered my correct credentials:
Windows PowerShell Credential Request : cmdlet Test-OwaConnectivity at command pipeline position 1
Warning: This credential is being requested by a script or application on the Server2.domain.com remote computer.
Enter your credentials only if you trust the remote computer and the application or script requesting it.
Supply values for the following parameters:
MailboxCredential
ClientAccessServer MailboxServer URL
Scenario              Result      Latency    Error
(ms)
                                                        https://server1.domain.com/owa
Logon                 Success    6282.13
So if I login with my domain username, it works and logs in. If the script runs using the 'extest....' user account created by the above ./new-TestCasConnectivityUser.ps1 , it does not work.
Has anyone got any ideas please? I know its not the network as it works under my username, I know all fo the services required are running as it works under my username. There are no entries at all in the receiving server's error logs for Application, System,
Exchange or Powershell at all.
Any help greatly appreciated.
Danny

Did you read this? http://support.microsoft.com/kb/2277649/en-us
Did you run Test-MapiConnectivity? If not, can you run and post results?
HossFly, Exchange Administrator

Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???

Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support

New Virtual Machine Wizard error: The server encountered an error while configuring hard disk on SEPmW8

on a backup DNS w2008 R2 server I tried create a new VM.
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
The server encountered an error while configuring hard disk on SEPmW8.
[Content]
You might not have permission to perform this task.
[Close]
when I tried creating v a new Vhd using default or custom folder, I get
[Window Title]
New Virtual Hard Disk Wizard
[Main Instruction]
The server encountered an error trying to create the virtual hard disk.
[Content]
You might not have permission to perform this task.
[Close]
But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
------------Platform info ---
the physical quad core Xenon server for backup dns also works as exchange server
has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.

These actions are not performed in the security context of the user. The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

"Sync encountered an error while connecting: Failed to connect to the server. Please try again."

"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
Thanks

Hi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error While activating 0Material(BI7)

Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arun

Dear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun

Encountered an error while activating

Similar Messages

Maybe you are looking for