Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.

Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks.

Similar Messages

  • ERROR: UDLD is rejecting a config that is valid only for the copper port on

    I am getting while doing port-configuration. It is taking same configuration in rest nexus 5548 and nexus 5020. Except one nexus 5548.

    You can try to find someone in the U.S to give it or sell it to.
    You cannot use it.
    Sorry

  • Error in MDDataSetBW.GetCellData.Please enter a valid value for character

    Hi All,
    We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
    The query works fine in Dev , but in Quality it shows the following error
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
    The universe is on BW Query and the BW Query works fine.
    Can someone please help on this

    Thanks Sathish for your input.
    We have created report level prompts and facing this issue because  we were selecting multiple values for prompts.
    Its working fine for single selection. Is there any way to  enable multi selection for the particular object at the BW end ?
    Or else we have to create the prompts (Single selection) at the universe level.
    Regards,
    Pranay

  • FV50-- Editing Option Error "Enter a valid value" Message 00002

    Hello FI experts,
    An user is trying to execute a tcode FV50 and clicking "Editing Options" to make changes to "Doc.Type option" from "Document type hidden" to "Enter with short name" under " Special functions for single screen transactions" section.
    When the user clicks SAVE button in "Accounting Editing options" screen, user is getting the the error message  "Enter a valid value".
    Can anyone tell me how to change this option and resolve this error?
    There are users they are successfully able to change it and I am even able to change the document type options without encountering this error.
    Any help on this is much appreciated!
    Thanks,
    Himadama

    Dianne,
    Thank you for your prompt response.
    The user has done modifications in FB00 but issue is still there.
    Could you elaborate more on what has to be done in this FB00 tcode?
    Thanks much.
    Thanks,
    Himadama

  • Enter a valid value error

    Hi,
    Can anyone pls. help us figure out the problem with the newly created business partner master records?  We get an "Enter a valid value" error message when the agent (user) tries to confirm the business partner in CIC.  The user got the same error after she created another bp master record.
    I created a third bp master record for the same customer but in another application server.  I didn't get an error so I asked the agent to use this bp master record instead of the first 2.  Unfortunately, the user got the abovementioned error again after editing the bp master record that I created in the original application server. 
    Hope you can help us.
    Thanks in advance,
    Theresa

    Perform theses steps
    - In LSMW read and convert only one entry from file
    - go to SM35 -> select your session with that one entry
    - select process , option process/foreground
    - choose process
    You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
    Regards
    Marcin

  • Error in VA01: Message 00002 'Enter a valid value'

    Hello Experts! When I try creating a sales order in VA01 after entering the order type and other mandatory information, I get the error message (no. 002 of class 00) saying 'Enter a valid value'. When I searched other threads in SCN with the same message, I found that this is probably because of authorizations or incorrect values in user parameters. I executed SU53 immediately after the message was issued and found that the check was successful. I even checked the profile parameters for my user ID and everything seems perfect. In fact, I was able to create sales orders until two days earlier and no user settings were changed since then. I tried creating orders from other user IDs and the same message is issued.

    after entering the order type and other mandatory
        information,  I get the error message
    If possible, share here after entering which mandatory field, system was throwing this pop up error.
    G. Lakshmipathi

  • Error in LSMW : Enter a Valid Value

    Dear All,
    I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
    I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
    I am selecting 14 Views in a single LSMW.
    Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
    Can anybody tell me why I am getting that error.
    Thanks in Advance.
    Tulasi

    Perform theses steps
    - In LSMW read and convert only one entry from file
    - go to SM35 -> select your session with that one entry
    - select process , option process/foreground
    - choose process
    You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
    Regards
    Marcin

  • ERROR BRAIN (599): for characteristic 0FISCPER  Please enter a valid value

    Hi,
    We’ve an BI 7.0 System with Patch Level SP12 which is previously connected to an NW 7.0 Portal System + BI Java that has SP13 installed.
    We’re able to create Queries and Web Templates via Query Builder and WAD for BI 7.0 and publish to portal.
    Recently, we’ve installed a new NW 7.0 Portal + BI Java with same package level. We made the configurations for Bex via Template Installer and everything is ok.
    Our reports has a 0FISCPER characteristics and when we run the reports in new portal, it displays the report. But when we want to change period and click the button created to set period, a popup opens and errors like “"for characteristic 0FISCPER  Please enter a valid value " displayed on popup.
    #1.5#005056915E48007200000013000016D000044A7EAFACF8B0#1207807880509#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#bcepik#2422##sapportal_TFP_5354550#bcepik#96c2d31006c411ddae48005056915e48#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR BRAIN (599): for characteristic 0FISCPER  Please enter a valid value
    MSGV1: 0FISCPER
    MSGV2: 200.001.#
    When we change BI’s Portal back to old one by changing the RSPOR_T_PORTAL table (default portal), it still works there.
    What may be cause this situation as it works on one portal and not works on another?
    Best Regards

    Hi,
    Pls chk the  Note 770174 - Values for 0FISCVARNT not correct - BRAIN E 599
    Symptom
    In case of web templates the value help for 0FISCYEAR doesnot work
    correctly.  Error message
    For characteristic 0FISCVARNT, enter value in permitted format
    comes up
    Other terms
    OLAP: F4 - 0FISCYEAR, 0FISCVARNT ,
    0fiscyearvalues_generate, master data read class , value help , F4
    Reason and Prerequisites
    Program error
    The selection option sent to the method 0fiscyearvalues_generate
    based on 0FISCVARNT are not porcessed and hence as null row is
    inserted in the resultset that cause the problem .
    Solution
    BW3.0B
               Import Support Package 24 for Release 3.0B (BW3.0B Patch 24 or SAPKW30B24) into your BW system. The Support Package will be available when note 0723193 with the short text "SAPBWNews BW 3.0B Support Package 24", describing this Support Package in more detail, is released for customers.
    BW3.1C (Content)
               Import Support Package 18 for Release 3.1C (BW3.1C Patch 18 or SAPKW31C18) into your BW system. The Support Package will be available when note 0723260 with the short text "SAPBWNews BW 3.1C Support Package 18", describing this Support Package in more detail, is released for customers.
    BW 3.50
               Import Support Package 9 for Release 3.50 (BW3.50 Patch 09 or SAPKW35009) into your BW system. The Support Package will be available when note 0763335 with the short text "SAPBWNews BW SP09 NetWeaver'04 Stack 09", describing this Support Package in more detail, is released for customers.
    This note may already be available before the Support Package is released.  However, the short text will still contain the words "preliminary version" in this case.
    Hope this helps,
    Regards
    CSM Reddy

  • Error message - KD199 Enter a valid value when Closing the Project at CJ20N

    Hi All,
    As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
    I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
    Could you pls let me know how to resolve this to close the Project.
    Thank you
    Chandu

    Hi Chandu,
    I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
    If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
    Hope this helps,
    Srinivas Potluri

  • Cannot create RFQ : Please enter a valid value

    Hi all,
    Kindly help me in my problem. I was trying to create a RFQ from my RFI. However, upon clicking on the "Create Follow-on Document", the error message "Please enter a valid value" appears. This message also appears when I tried changing the RFI. Please help me. Thanks!
    Thanks and Regards,
    Happy

    Hi All,
    This was resolved after our patching
    Thanks and regards,
    Happy

  • Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.  Error Code: c0000005  Address: 76f73ac3     I clicked on the OK button and the downloader closed.     I then tried to download from the organizer. I

    Photoshop Elements 12
    Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
    Error Code: c0000005
    Address: 75e32f71
    I clicked on the OK button and the downloader closed.
    I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
    I don't even have the Camera hooked up and I get this error on download.  I redownloaded everything and reinstalled.  I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work.  I tried support and they wouldn't help because I bought it in March this year.  Pretty frustrating as I have re-purchased Elements about every 2 years.  I think I might need a new CODEC?   I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

    I finally found that it was missing a picture so the Catalog was "corrupted".  I just deleted the picture and it started working.
    I hate Adobe and their total lack of support - thanks for nothing Adobe .  Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old  but they still don't support it on errors.  Only install errors!
    I have upgrade and repurchase this product 4 times now.  I will find something else next time!

  • SM30: "Enter a Valid Value" Issue?

    When I do an SM30 to maintain a table, the cursor jumps to a field, a yes or no field, and says enter a valid value. When I cjheck the possible values for this it is N or Y, exactly like is in the field? I am not sure what SAP is giving me the message for.
    Thank-You.

    How is the yes/no field declared in the table?  Typically a yes/no or true/false field is set as a "X" for true or yes, " " for false or no.

  • Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience

    Ver 8 installed fine but can't get it to launch from any application. Have tried going back to earlier versions (6.1,6.2,7) but the same problem occurs.
    Same error message each time:
    "Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience"
    AppName: acrord32.exe AppVer: 8.0.0.456 ModName: acrord32.dll
    ModVer: 8.0.0.456 Offset: 00020916
    Tried every troubleshooting tip in the Support Knowledgebase to no avail.
    Have been using Reader for years with never any problems and now I can't seem to get this fixed after numerous hours.
    Any suggestions would be appreciated. Is there a free support line I can call or is it paid support only?
    Thanks,
    Dee

    Like others my problem was Adobe Reader 8.1.2 died terribly and with a buggy stench with the following error:
    AppName: acrord32.exe AppVer: 8.1.0.137 ModName: msvcr70.dll
    ModVer: 7.0.9466.0 Offset: 000013d6
    RESOLUTION ON XP SP2
    1. Control Panel, Users
    2. Create a new user account NewUser (for example)
    3. Start, Log Off
    4. Switch Users to the NewUser
    5. Wait the mini eternity for new user to be set up.
    6. Start Adobe Acrobat 8.1.2 and you will see a red splash screen along with some license updating things.
    7. Adobe 8.1.2 now starts fine under NewUser
    8. Switch back to your regular user name. Start, Log off, Switch Users
    Now a note to Adobe. Do you folks really have to make this such a frickin pain to get working? Do you at Acrobat have any idea of how much time we users blow and how much of our lives pass by while we try to re-download and work with this product? You are directly responsible for a small slow down in the world economy by this. Get the hint.... create an 8.1.3 that omits the secret code steps above.
    The only thing that kept my sanity during this were nice songs on channel 86 on SIRIUS. Thank you SIRIUS.
    Thanks,
    Jim

  • "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."

    please... help. i can't to sync my tones to my ip5s. i don't know why....
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    "Please tell Microsoft about this problem."
    And bla bla bla... Already send error report, but everytime i want to sync tone to my phone that toolbox will appear.
    So frustrated.
    So please help me....T____T

    hi David!
    okay, it's time to check if you have a weird registry problem. (the problem i'm thinking about produces the same error message.)
    we diagnose that by creating a new user account (with full administrative privileges). you can do that in your "user accounts" control panel. there's help documentation on it to the left of the screen. while you're in there, also switch off "fast user switching" in your logging-on preferences.
    now log on to the new user account. can you successfully launch itunes from inside there?
    keep us posted on your progress.
    love, b

  • "iTunes has encountered a problem and needs to close. We are sorry for the

    HI all
    I've got know this problem:
    ""iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." With the option to send error report or don't send.
    and the error signature is:AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
    ModVer: 0.0.0.0 Offset: 01a21040
    Does anyone know what should i do?
    Thanks
    Wouiners

    I had the same issue. I found a solution under a different thread posted by scubastevee32. It worked for me. I copied pasted his solution below.
    after countless hours of dead ends.... I found this to fix the problem(thank you "b noir")
    hat one could be being caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    HP Pavilion   Windows XP Pro  

Maybe you are looking for