Encountering Error while executing excel report in Reports 10g

Hi,
I have got Oracle 10g developer environment which has been implemented on Web browser through Oracle Jinitiator. I am running an excel report and encountering 105101: non-ORACLE exception -105101 when the output file exceeds a size of around 23MB. Where is this configuration done on Reports Server? Can we change this?

Hi
What do you mean by Install portal? Where should I install?
While installing the server i have choosen the Usage type EP also!!
Thanks
mv_d

Similar Messages

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

0ADHOC error while executing the query from Report Designer

Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVR

Hi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine

Run time error while executing Project Info system Reports

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Run time Error while executing Project Info system Reports (CN41/CN41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Error while executing sales tax report S_ALR_87012394

Hi,
I am getting the below error while executing the sales tax report S_ALR_87012394.
Infomration: I have maintained the tax jurisdiction code 9 digits initially.after that i have maintained with 10 digits
Tax jurisdiction LA0000000 has defective structure
Message no. FS790
Diagnosis
When calling the GET_JURISDICTION_LEVEL_TTXD function module, a tax jurisdiction code was transferred which does not correspond to the structure specified in the table.
Procedure
Check the calculation procedure for the company code and determine the respective tax jurisdiction length and structure in Customizing. Check that the tax jurisdiction code transferred corresponds to the tax jurisdiction length and structure.
kindly help me
Thanks
Supriya

check is there any notes which you have to apply to correct already posted entries with 9 digits. because of this its generating this error

ABAP Run time Error whle executing the Balance sheet report in FGI0

Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06/12/2009 15:17:17
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     RAISE RKD_CONDITION_READ       (internal error)
     Long text of error message:
      Diagnosis
          The program was terminated because a situation occurred which
          should not have arisen.
      Procedure
          Analyze the situation and contact SAP.
     Technical information about the message:
     Message class....... "KH"
     Number.............. 299
     Variable 1.......... "RKD_CONDITION_READ"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLKYPR
    Include                                 LKYPRU31
    Row                                     36
    Module type                             (FUNCTION)
    Module Name                             RKD_CONDITION_READ
Thanks
Supriya

Hello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Error while executing report : Error in program CL_RSR_RRK0_CURR

Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.

Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay.

Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

Time Our Error while executing a BW reports.

Hello BW experts ,
We are getting the 'Time Our Error while executing some BW reports.'
Could anyone help us to solve the above issue.
regards,
Amol.

Hi,
previous answer is necessary, always check the shortdumps ... it can tell you alot about your problem
(ST22)..
what also could help is the following ... go to the infopackage, go to <u>scheduler</u> in the upper taskbar and there you can also set the time out parameters ..
But first, get your problem solved by the things you can read in the shortdump analysis report
also clever, is doing an extract test before you start loading ... rsa3
hope this helps ...
best regards,
Davy

Encountering Error while executing excel report in Reports 10g

Similar Messages

Maybe you are looking for