Encrypt SSN in idoc for infotype 0002
I have to encrypt a field SSN for IT 0002 in idoc.
after transporting i should have ssn in encryptred form.
Is there any function module to encrypt desired field ?
Thanks in advance.
Encryption at database level is implemented using the BAdI IDOC_DATA_MAPPER and the enhancement spot IDOC_DATA_CRYPT.
If it only needs to be encrypted for display check transaction WECRYPTDISPLAY.
Similar Messages
-
Add button in transaction transaction PA20 for Infotype 0002
Hi All,
Hope all are doing good progress in their works... I had one question.
Has anyone added a button in the transaction PA20 for the Infotype 0002. I need to add a button in this screen so that the User can navigate from this screen in PA20 to the transaction CV04n.
Helpful answers will definetly be rewarded..
Thanks,
Susanth Kumar.Hi,
Package name PBAS.
Check in SMOD with F4 help and give pakage name.
We can find the exits. But for your requirement we need to have a screen exit or menu exit.
FM exit-
HRPBAS01-User Exit for HR Master Data-EXIT_SAPLRPIN_001.
User exit-
PBAS0002-PA: Enhancements for Personnel Administration - Menu-EXIT_SAPMP50A_001.
Reward if helpful.
Best Wishes,
Chandralekha -
IDOC HRMD_A for Infotype 0002 (Personal Data)
Hello,
I'm trying to send the modifications that I make in a person in the transaction PA30 in the table PA0002 automaticly. But when I go to thew program "RBDMIDOC" and select the message type "HRMD_A" (HR: Plan data and HR master data) it says that it doesn't have anything to send. But when I modify a Object (o, c, s), and I execute the program it send information. The object(o,c,s) has sent correctly. But when I want to send the Personal Data (P), it doesn't send anything. I have the trigger activated.
Have I selected the message type correctly?
PMupdating id for malasian employee is not working.
Q0002-perid. it come only for malasian employee.
screen no 2044
Use transaction PA30,
Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab
You can use any Malaysian employee #
Click on change button
Enter in an ID number. (There is no validation on ID number field.)
Click either the enter or save button. The ID number disappears and a message says No change found. -
Personal Profile service for Brazil - Type Conflict for infotype 0002
Hello All,
We are enabling personal profile service for Brazil. And we did all the required configuration for that.
When I access the personal info service I can see the overview page with personal data. But when I click on display link, I get the error message saying -
Type conflict with ASSIGN in program CL_HRPA_UI_CONVERT_0002_BR
Is there any configuration missing?
Thanks,
BhushanShort text
Type conflict with ASSIGN in program "CL_HRPA_UI_CONVERT_0002_BR====CP".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_HRPA_UI_CONVERT_0002_BR====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
How to correct the error
Adapt the type of the field symbol to the type of the field or use an
untyped field symbol or use the "CASTING" addition.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSIGN_TYPE_CONFLICT" " "
"CL_HRPA_UI_CONVERT_0002_BR====CP" or "CL_HRPA_UI_CONVERT_0002_BR====CM003"
"IF_HRPA_UI_CONVERT_STANDARD~OUTPUT_CONVERSION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Line SourceCde
6 DATA: attributes TYPE hrpad_field_attribute_tab.
7 DATA: l_object_key TYPE hcm_object_key.
8 DATA: l_subrc TYPE sysubrc.
9
10 FIELD-SYMBOLS <r0002_br> TYPE hcmt_bsp_pa_br_r0002.
11 FIELD-SYMBOLS <p0002_br> TYPE p0002.
12 FIELD-SYMBOLS <p0625> TYPE p0625.
13
14 is_ok = if_hrpa_ui_convert_standard~true.
15 ASSIGN screen_structure TO <r0002_br>.
16 l_object_key = <r0002_br>-object_key.
17 MOVE-CORRESPONDING pnnnn TO super_screen_ref.
18
19 CALL METHOD super->if_hrpa_ui_convert_standard~output_conversion
20 EXPORTING
21 screen_structure_name = a_super_screen_structure_main
22 pnnnn = pnnnn
23 message_handler = message_handler
24 field_metadatas = field_metadatas
25 IMPORTING
26 screen_structure = super_screen_ref
27 is_ok = is_ok
28 field_attributes = field_attributes.
29
30 MOVE-CORRESPONDING super_screen_ref TO screen_structure.
31
32 CASE a_super_screen_structure_main.
33 WHEN 'HCMT_BSP_PA_XX_R0002'.
34 ASSIGN pnnnn TO <p0002_br>.
35 ASSIGN screen_structure TO <r0002_br>.
>>>>> ASSIGN pnnnn2 TO <p0625>.
37 MOVE-CORRESPONDING <p0002_br> TO <r0002_br>.
38 MOVE-CORRESPONDING <p0625> TO <r0002_br>. -
Sending the enhanced Infotype 0002 outside SAP via an IDOC
Hello Friends,
We have added couple of Z fields to the standard 0002 Iinfotype table PA0002.
I can see the custom fields in the trans : PA30 screen for infotype 002.
Now, we want to send these custom fields value outside SAP via an IDOC.
Here are the steps I followed :
I created a Z Segment in an extended idoc with the structure PA0002.
I went in transaction PM01 for Infotype 0002 and added the above created Z segment as a 2nd IDOC segment.
In transaction PA30 for 002, I made changes to the custom field value for a person 12039.
Created an idoc via BD21.
IDOC generated with the Z Segment but it doesn't contain any Z custom fields.
Which step am I missing here? Do I have to have a user-exit or BADI to achieve this OR can it be done without writing any code?
Basically I
I will really appreciate your help.
Regards,
Pooja PandeyPooja,
you need to fill each field manually.
check this code i am filling ZHCMS_PI_SEMENT
data: sgmnt_e1pityp type e1pityp.
field-symbols: <wplog> type any.
field-symbols: <wplog1> type any.
data: ixxxx type e1pityp, iyyyy type e1plogi,sgmnt_hcms_pi type zhcms_pi_segment,wa_idoc_data_x type edidd, ls_idoc_data type edidd.
data: lv_p0001 type standard table of p0001 ,lv_p0002 type standard table of p0002 ,lv_p0007 type standard table of p0007 .
data: lv_p0521 type standard table of p0521 ,lv_p0710 type standard table of p0710 ,lv_p2001 type standard table of p2001 .
data: ls_p0001 type p0001,ls_p0002 type p0002,ls_p0007 type p0007 ,ls_p0521 type p0521 ,ls_p0710 type p0710 ,ls_p2001 type p2001 .
data: row_index type sy-tabix,del_index type sy-tabix.
data: lcx_root type ref to cx_root.
fILL THE E1PITYP
try.
Keep the segments which have changed date greater than last run date in update mode
read table idoc_data into wa_idoc_data_x with key segnam = 'E1PITYP'.
assign wa_idoc_data_x-sdata to <wplog> casting type e1pityp.
ixxxx = <wplog>.
loop at idoc_data into wa_idoc_data_x where segnam = 'E1PLOGI'.
row_index = sy-tabix + 1.
assign wa_idoc_data_x-sdata to <wplog1> casting type e1plogi.
iyyyy = <wplog1>.
sgmnt_e1pityp-plvar = ixxxx-plvar.
sgmnt_e1pityp-otype = ixxxx-otype.
sgmnt_e1pityp-objid = iyyyy-objid.
sgmnt_e1pityp-infty = '0001'.
sgmnt_e1pityp-begda = ixxxx-begda.
sgmnt_e1pityp-endda = ixxxx-endda.
clear ls_idoc_data.
ls_idoc_data-segnam = 'E1PITYP'.
ls_idoc_data-sdata = sgmnt_e1pityp.
insert ls_idoc_data into idoc_data index row_index.
APPEND t_idoc_data .
Get the ZZSWISSREID
sort lv_p0001 by begda descending.
read table lv_p0001 into ls_p0001 index 1.
sgmnt_hcms_pi-zzswissreid = ls_p0001-zzswissreid.
Get the custom data from IT0002
sort lv_p0002 by begda descending.
read table lv_p0002 into ls_p0002 index 1.
sgmnt_hcms_pi-zzglobalid = ls_p0002-zzglobalid.
sgmnt_hcms_pi-zzsource_id = ls_p0002-zzsource_id.
sgmnt_hcms_pi-zzlegacy_emp_id = ls_p0002-zzlegacy_emp_id.
ls_idoc_data-segnam = 'ZHCMS_PI_SEGMENT' .
ls_idoc_data-sdata = sgmnt_hcms_pi.
row_index = row_index + 1.
insert ls_idoc_data into idoc_data[] index row_index.
clear : lv_p2001[] , lv_p0001[] , lv_p0002[] , lv_p0710[] ,lv_p0007[], lv_p0521[], ls_p2001 , ls_p0001 , ls_p0002 , ls_p0710 ,ls_p0007, ls_p0521 .
APPEND t_idoc_data.
endloop.
Thanks
Bala Duvvuri -
Idoc creation for infotype PA006
Hi All,
i am developing idoc for infotype pa0000, paooo1,pa0002,paoo03 and pa0006.
Data is inserting for first three info type but for infotype pa006 (address data), data is not inserted/updated in database but idoc status is : aplication data posted(here i am not giving object id for E1PITYP)
but if i will give object id for E1PITYP then i am getting idoc status as aplication data partially posted and idoc status number is 52 with description : Object 01 ,P ,00000010 does not exist: infotype 0006 cannot be created
i have given all appropriate information
Pls advice
Thanks
SantoshHi srini,
i have already given subtype as 1 (permanat adress)
i have given all information
but i am getting said error.
regards
santosh -
How to validate the Male or Female in for infotype 002 in LSMW at FieldMapp
Dear freinds,
Small problem in LSMW for infotype 0002.
Whiel recording for infotype 002 ihae done for an employee based on FeMale(GESC2) , no when i uploading data i am having for male (GESC1) ...how can i toggle in my
Field mapping please can any body tell me
My field mapping presenlty have is :
__BEGIN_OF_RECORD__ Before Using Conversion Rules
Rule : Default Settings
Code: ZPA30_002 = INIT_ZPA30_002.
TABNAME Table Name
Rule : Default Settings
Code: ZPA30_002-TABNAME = 'ZPA30_002'.
TCODE Transaction Code
Rule : Default Settings
Code: ZPA30_002-TCODE = 'PA30'.
PERNR Personnel Number
Source: ZP0002_STRUC-PERNR (Personnel number)
Rule : Transfer (MOVE)
Code: ZPA30_002-PERNR = ZP0002_STRUC-PERNR.
TIMR6 Time period indicator: Period
Rule : Constant
Code: ZPA30_002-TIMR6 = 'X'.
CHOIC Infotype selection for HR master data maintenance
Rule : Constant
Code: ZPA30_002-CHOIC = '0002'.
BEGDA Start Date
Source: ZP0002_STRUC-BEGDA (Start Date)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-BEGDA0(2) = ZP0002_STRUC-BEGDA6.
ZPA30_002-BEGDA2(2) = ZP0002_STRUC-BEGDA4.
ENDDA End Date
Source: ZP0002_STRUC-ENDDA (End Date)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-ENDDA0(2) = ZP0002_STRUC-ENDDA6.
ZPA30_002-ENDDA2(2) = ZP0002_STRUC-ENDDA4.
ZPA30_002-ENDDA+4(4) = ZP0002_STRUC-ENDDA.
ANREX Form of address text
Source: ZP0002_STRUC-ANREX (Title)
Rule : Transfer (MOVE)
Code: ZPA30_002-ANREX = ZP0002_STRUC-ANREX.
NACHN Last Name
Source: ZP0002_STRUC-NACHN (Last Name)
Rule : Transfer (MOVE)
Code: ZPA30_002-NACHN = ZP0002_STRUC-NACHN.
VORNA First Name
Source: ZP0002_STRUC-VORNA (First Name)
Rule : Transfer (MOVE)
Code: ZPA30_002-VORNA = ZP0002_STRUC-VORNA.
GESC2 Gender key -
> how can i put MAle condition
Source: ZP0002_STRUC-GESC2 (Female)
Rule : Transfer (MOVE)
Code: ZPA30_002-GESC2 = ZP0002_STRUC-GESC2.
GBDAT Date of Birth
Source: ZP0002_STRUC-GBDAT (Date of birth)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-GBDAT0(2) = ZP0002_STRUC-GBDAT6.
ZPA30_002-GBDAT2(2) = ZP0002_STRUC-GBDAT4.
ZPA30_002-GBDAT+4(4) = ZP0002_STRUC-GBDAT.
GBLND Country of Birth
Source: ZP0002_STRUC-GBLND (Country of Birth)
Rule : Transfer (MOVE)
Code: * Leave date value in internal format (YYYYMMDD)
ZPA30_002-GBLND = ZP0002_STRUC-GBLND.
Caution: Source field is longer than target field
Code: ZPA30_002-NATI2 = ZP0002_STRUC-NATI2.
FATXT Marital Status
Source: ZP0002_STRUC-FATXT (Marital Status)
Rule : Transfer (MOVE)
Code: ZPA30_002-FATXT = ZP0002_STRUC-FATXT.
Note : however my SourceField if i click i can see both GESC1 & GESC2.
Please help me in this regard
Regards
SyamlaHello,
Male or female in 0002 is determined the field ANRED. (Mr. Ms.) based on this only the GESCH(Gender key is determined).
So if a employee is a male fill ANRED with 1 else with 2.
Thanks.
Krishna -
How to validate the Male or Female for infotype 002 in LSMW at FieldMapping
Dear freinds,
Small problem in LSMW for infotype 0002.
Whiel recording for infotype 002 ihae done for an employee based on FeMale(GESC2) , no when i uploading data i am having for male (GESC1) ...how can i toggle in my
Field mapping please can any body tell me
My field mapping presenlty have is :
__BEGIN_OF_RECORD__ Before Using Conversion Rules
Rule : Default Settings
Code: ZPA30_002 = INIT_ZPA30_002.
TABNAME Table Name
Rule : Default Settings
Code: ZPA30_002-TABNAME = 'ZPA30_002'.
TCODE Transaction Code
Rule : Default Settings
Code: ZPA30_002-TCODE = 'PA30'.
PERNR Personnel Number
Source: ZP0002_STRUC-PERNR (Personnel number)
Rule : Transfer (MOVE)
Code: ZPA30_002-PERNR = ZP0002_STRUC-PERNR.
TIMR6 Time period indicator: Period
Rule : Constant
Code: ZPA30_002-TIMR6 = 'X'.
CHOIC Infotype selection for HR master data maintenance
Rule : Constant
Code: ZPA30_002-CHOIC = '0002'.
BEGDA Start Date
Source: ZP0002_STRUC-BEGDA (Start Date)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-BEGDA0(2) = ZP0002_STRUC-BEGDA6.
ZPA30_002-BEGDA2(2) = ZP0002_STRUC-BEGDA4.
ENDDA End Date
Source: ZP0002_STRUC-ENDDA (End Date)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-ENDDA0(2) = ZP0002_STRUC-ENDDA6.
ZPA30_002-ENDDA2(2) = ZP0002_STRUC-ENDDA4.
ZPA30_002-ENDDA+4(4) = ZP0002_STRUC-ENDDA.
ANREX Form of address text
Source: ZP0002_STRUC-ANREX (Title)
Rule : Transfer (MOVE)
Code: ZPA30_002-ANREX = ZP0002_STRUC-ANREX.
NACHN Last Name
Source: ZP0002_STRUC-NACHN (Last Name)
Rule : Transfer (MOVE)
Code: ZPA30_002-NACHN = ZP0002_STRUC-NACHN.
VORNA First Name
Source: ZP0002_STRUC-VORNA (First Name)
Rule : Transfer (MOVE)
Code: ZPA30_002-VORNA = ZP0002_STRUC-VORNA.
GESC2 Gender key -
> how can i put MAle condition
Source: ZP0002_STRUC-GESC2 (Female)
Rule : Transfer (MOVE)
Code: ZPA30_002-GESC2 = ZP0002_STRUC-GESC2.
GBDAT Date of Birth
Source: ZP0002_STRUC-GBDAT (Date of birth)
Rule : Transfer (MOVE)
Code: * Date Value as DDMMYYYY
ZPA30_002-GBDAT0(2) = ZP0002_STRUC-GBDAT6.
ZPA30_002-GBDAT2(2) = ZP0002_STRUC-GBDAT4.
ZPA30_002-GBDAT+4(4) = ZP0002_STRUC-GBDAT.
GBLND Country of Birth
Source: ZP0002_STRUC-GBLND (Country of Birth)
Rule : Transfer (MOVE)
Code: * Leave date value in internal format (YYYYMMDD)
ZPA30_002-GBLND = ZP0002_STRUC-GBLND.
Caution: Source field is longer than target field
Code: ZPA30_002-NATI2 = ZP0002_STRUC-NATI2.
FATXT Marital Status
Source: ZP0002_STRUC-FATXT (Marital Status)
Rule : Transfer (MOVE)
Code: ZPA30_002-FATXT = ZP0002_STRUC-FATXT.
Note : however my SourceField if i click i can see both GESC1 & GESC2.
Please can any one let me know .
Regards
SyamlaHello,
Male or female in 0002 is determined the field ANRED. (Mr. Ms.) based on this only the GESCH(Gender key is determined).
So if a employee is a male fill ANRED with 1 else with 2.
Thanks.
Krishna -
Iam getting any error in infotype 0002 while doing enhancement ...
Dear all
could any one let me know why iam getting this error ,
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
i have just added an one custom field ...(zzname , data element is zzname type char 20)as per the business requirement.
regards
vamsiIam getting any error in infotype 0002 while doing enhancement .
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
when iam activating .................the structure i got the above error...........please urgent i have just added only one field -
Need Fcode in User Exit For Infotype
Hi,
I am writing a User exit for Infotype 0002 at Customers Site. I need Fcode to realize a specific logic. I am using the exit PBAS0001 for this purpose. can anyone tell me how to I get Fcode so that I can use it in the code ?
Regards,
SumaHi Suma,
sorry that i posted the false BAdI.
You have to use HRPAD00INFTY. That is for PA.
The BAdI HRBAS00INFTY is for PD/OM.
Regards
Bernd
But there is no paramter ok_code
Message was edited by:
Bernd Köhn -
Poland Infotype 0002 - standard screen
Hi,
In infotype 0002 there are many standard screens for countries for example Japan has screen 2022. Is there a standard screen for Poland for infotype 0002 or should I use 2000 or 2044?
Regards,
Warren.you can use one of these 2 or copy into some new screen and use
-
Hi experts,
I have an requirement , when I change any infotype record from pa30 or pa40, i.e
suppose I am changing the infotype 0002 in pa30 , the idoc only generated for that changed infotype only,
but I need it to generate the idoc for some other infotypes also I.e(0000,0002,t528t, 0016).
So please give me some help to generate idoc when I run a rbdmidoc(bd21).
Thanks in advance.
Venkatyes, visible bounds is reading the non-visible masked objects too.
you're going to have to do it the hard way, loop through all your objects to get your bounds manually, and while you're at it, test for clipping masks and use the masking path instead. -
Calling infotype 0002 in ALV report for showing employee photo
Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAYHi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
| [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSUU5'.
wa_bdcdata-dynpro = '0050'.
wa_bdcdata-dynbegin = k_ok.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'USR02-BNAME'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'USR02-BNAME'.
wa_bdcdata-fval = g_value.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'SHOW'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSUU5'.
wa_bdcdata-dynpro = '0100'.
wa_bdcdata-dynbegin = k_ok.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=ACTG'.
APPEND wa_bdcdata TO it_bdcdata.
g_opt-dismode = 'E'.
g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
CALL TRANSACTION 'SU01' USING it_bdcdata
OPTIONS FROM g_opt.
Regards,
Selva K. -
ALE: Missing infotype 0002 in Idoc Creation
Dear experts,
I need your help regarding ALE configuration. Currently IT02 is included in the customer distribution model for HRMD_A message type but everytime we create a change in an employee that triggers the change pointer it doesn't capture the changes for IT02. I can only see IT0, IT1, and IT3 but IT02 is also in the filter? do you have any ideas how can I troubleshoot this scenario? thanks in advance!
Regards,
MikeDear Krishna,
Hope you are doing good.
I know its very late in getting into this conversation. Since I am also experiencing the same issue, i need some inputs from you.
The error you posted on the top is same what i am getting when I am doing data transfers from SAP HR to E-Rec systems. Our iDoc is working file in Development server but not in Quality server. I am experiencing the same errors what you have mentioned above.
When i checked the error, this error has occurred in subroutine read_namtb for structure of infotype.
Proceedure is to Check the entry for infotype in table T777D (structure, IDoc segment,
expanded structure) and the corresponding structures.
As you have resolved this issue before, can you please suggest what needs to be maintained in the tables such as T777D, T777E, and T777Z.
Appreciate your valuable inputs on this.
Thank you. -
ALE - IDOC Infotype 0002 additonnal fields...
hello all
We have add 2 customers fields in the infotype 0002, and we would like to sent the infotype 2 with these
2 new fields.
So we have created an extension which contains a segment with these 2 fields. But unfortunately
with the pfal transaction , these 2 fields are not filled by values.
Has someone have an advice ?
thank youhello all
thx for your contribution
it works well for a specific message that we have updated with an extension which include the segment Z1P0002 , but in our case we have a lot specific message . so we update table Table T777d in order to include specific segment Z1P0002 ( the 3rd after E1P0002, E1Q0002 )
but unfortunately, the fact to update T777d , occurs error for all the message they are not concerning with this extension.
Maybe an another way exists ?
Thx for help by advance.
Maybe you are looking for
-
Hi When we click on AP Invoice add button I need to open another user define form and fill the grid with AP Invoice matrix data how it is? Help me please Regards Sai krishna Edited by: Rui Pereira on Dec 23, 2008 3:40 PM Edited by: Rui Pereira on Dec
-
How to sum the quantity in opportunity ?
Hi all, On the opportunity detail page, you can add an "opportunity product revenue". For each record you define the quantity and the purchase price. When you click on the "Update opportunity Totals", the revenue field from opportunity is automatical
-
How to make the buttons INVISIBLE in the Application toolbar
Hi All, I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition. Could you please let me know how to make that part
-
Video driver for IBM 300GL?
Hi, I need to install Solaris 8 on an IBM 300GL. I have tried a few of the S3 and Number Nine drivers (these seem to get PnP'd under NT/2000) with no success. Can anyone suggest a generic driver that should work on the 300GL? Thanks, JB
-
Preflight Panel. Could this be DONE?
Hello. I'm fairly new with creating custom panel for Photoshop CS4/CS5 and I'm just wondering if creating a mini Preflight panel that reports details about an active document is possible. Similar to the screenshot below. Thanks.