Encrypted External NOT Mounting

I have a 1TB WD external I have encrypted and used for Time Machine backups. I decided to erase the hard drive and reinstall OS. I reinstall the OS to OSX 10.8.2 Mountain Lion. Once this was finished I plugged in the hard drive to access important data. My intentions were to use this hard drive as the primary to keep clutter off my Mac. I noticed that Time Machine had finished its daily back up but was doing something. I opened it and it stated it was decrypting the drive. I could not find a way to pause/stop this process and did not activate it to do such (took forever to encryp it in the first place). I was in recliner and got up to plug the computer in to charge. While setting it down the hard drive slipped out of my hands and came unplugged. It was a short few inches fall so no damage to the HD. Now when I plug the HD in the lights shine on the hard drive and you can hear it working. But it will not mount on the desktop. Called WD for assistance and we found it in Disk Utility. It checked out fine there. Plugged into a PC and would not mount. Found it in a debug panel and checked good. He stated the drive was good but something was going on with the Time Machine/ File Vault. I need to access this HD and is very important to get the information off at the least. I know the password. I just can not get to put it in. Any help??????

...we found it in Disk Utility. It checked out fine there.
What exactly do you see in Disk Utility? Post a screenshot if possible.

Similar Messages

Firelite Firewire external not mounting

I am running OS 10.4.7 and my external hard drive will not mount. I went back to the install CD and tried that but it says that it needs a system folder in order to complete the installation. Where can I find this sort of folder? Do I need to download any new software updates or any drivers?
Help please!!!

Here's the strange thing. Boot up Mavericks....not mountable. Not visible in Disk Utility.
Boot up Snow Leopard. It mounts and (obviously) visible in Disk Utility.
I've tried a slightly different MyBook and that works fine and so it looks like some WD problem perhaps?

Iomega Firewire/USB External NOT MOUNTING!

I have a 320Gig Iomega hard drive and i've been having some issues with it. when i try to mount it on my powerbook, it only shows as greyed out in the Disk utility, i can verify and repair, i ran the repair which took a VERY long time, and restarted, but nothing changed. ideas?

Did a repair, said nothing to repair, i guess it just takes a little while to mount these days. might be going out...not sure.

HOW TO FIX MOUNT ISSUE ON OSX 10.8.3 AND ENCRYPTED EXTERNAL DRIVES

OSX version 10.8.3 doesn't mount my encrypted external drive (MAC OSX extended journalled encrypted). When I enter my password the window greys out and stays there forever without mounting the drive. I have two seperate drives on this HDD ( one Fat and the other one journaled encrypted) the Fat one mounts without any roblem. The only option in the first aid tab is verify disk and everything else is greyed out. Resault of verify is "Error: This disk needs to be repaired. Click Repair Disk." but I can't run repair since it is greyout.

If the volume won't mount, you can't repair it.
Triple-click anywhere in the line below to select it:
diskutil list; echo; diskutil cs list
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

External Hard drive will not mount on desktop

I have a 17" Powerbook G4 that has replaced a broken iBook G4. I've been using a Western Digital MyBook Pro Edition as a secondary drive for my multimedia as well as my iTunes Library. It worked fine on the old iBook.
When I plug it into the Powerbook, using either USB2 or Firewire 800, it will not mount to the desktop. It DOES however appear in the System Profiler as "External HD Button and Lights". The drive is formatted for FAT32 and works fine on my Windows XP desktop machine, so I know the drive functions mechanically. A different hard drive, a Maxtor mounts to the desktop fine using USB2, so it isn't a bus issue.
This is driving me nuts. I LOVE this computer, but I have WAY more invested in music than the cost of the computer.
Thanks in advance.
Message was edited by: hempomatic

It took a while to figure it out but apparently there was a conflict with bluetooth. I disabled it and all is well.

Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD

Help!
I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
Now iPhoto won't open and I get this error:
"Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
So I do this and try to repair the database as suggested and I get another error:
"iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up."
But it's not - no external hard drive is connected.
I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again).
So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive).
But I can't even get the hard drive to work....I get this error
"NTFS-3G could not mount /dev/disk2s1
at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)"
I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly?? I don't know....
(a) how do i fix iphoto
(b) how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
Any assistance would be magic for this little lady!

(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
First see if you can reformat the EHD to MS-DOS FAT with Disk Utility. If you can
open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
Select the destination for the export to be the EHD or a folder on the EHD. This process will create a folder for each Event in your library with the same name as the Event and contain the original image files. The EHD will be useable by a PC and the photos will be available also.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

How to make external devices (like iPods, etc.) NOT mount as connected drives when plugged in via USB to a Mac?

If I plug my iPod (or a thumb drive or whatever) to my Mac's USB port, the device appears as a icon representing a connected drive on my Mac's Desktop.
This is normal, expected behavior.
HOWEVER, in some cases, I'd prefer that the device not "mount" as a connected external drive.
With thumb drives or external USB drive, of course, I want them to "mount" so I can transfer files on or off them -- that would be the only possible reason to connect an external drive like that.
But with other Apple devices like iPods or iPhones, there are TWO possible reasons to connect them to a Mac: either to "sync" them or transfer files on/off them; OR, to simply recharge the device's battery. (Or, both sync and recharging functions at once.)
For those people who use their Apple devices in ways that require transferring files (i.e. most people), then having the device "mount" as a connected device is a desirable behavior.
But in my circumstance (and I bet there are a lot of people in a similar circumstance), I have no need or desire to transfer any data to or from my device every time I plug it into my Mac: I'm plugging it in SOLELY to recharge the device's battery.
Specifically, in my case, I have a 6th-gen iPod Nano, and I use it exclusively as an FM radio and a pedometer. I don't have any mp3s or songs or any other external files loaded on it, nor do I plan to add any in the future.
The only reason I ever plug it into my Mac is so that I can recharge the iPod's battery.
But the "problem," which is a minor one I admit but a problem nonetheless, is that every time I connect the iPod to the Mac, the iPod appears as a "connected drive" icon on my Mac's desktop. Which means that I'm not supposed to just unplug the iPod when I'm done -- first, I have to find its icon on the Mac Desktop, and then drag the icon to the Trash, to "unmount" it -- and only then can I freely unplug the iPod without getting an error message telling me that I shouldn't just disconnect connected drives without first properly unmounting them.
This would be bothersome enough if I only had to do it once per connection, but in the case of the iPod Nano, there's no way to tell how recharged it is while it is in the act of recharging, so that to see if I'm "done," I have to unplug it, check the battery status, and if it's not fully charged, re-plug it back in. So that each time I recharge it, I often have to unmount the drive several times, depending on how impatient I am.
There has to be a way to prevent the mounting of the drives of devices that one is connecting simply for the purpose of recharging. But how?
Strangely, I also have an old iPhone, and when I plug that in for recharging in the same way, it DOESN'T appear as a connected drive on the Desktop. I'm not sure how I managed to do this, but long ago I must have changed some setting or preference for this to happen. And by now I've forgotten what I did.
I'd prefer that I could change the "mount/don't-mount" setting on a device-by-device basis -- i.e. make it such that this particular iPod doesn't load, but perhaps a different iPod would load -- but if that's not possible, then is there a way to stop ALL iPods and iPhones from loading as connected drives when plugged in?
(I'm not talking about appearing as connected drives within iTunes -- I'm talking about appearing as an icon on the Desktop in the Finder.)
And please don't tell me to just buy a wall charger! I prefer to recharge off my computer if possible, using the charging cord that came with the iPod.
I presume there's some simple setting to toggle this on or off, but I haven't yet found it. Any clues would be appreciated. Thanks!

Well, I already know about that Finder Preferences option, but that is not what I'm looking for. Why not? Because I still need CDs and DVDs to appear on the Desktop and mount properly! If I uncheck the "CDs, DVDs and iPods" option, then I lose the ability to access CDs and DVDs, which creates a whole new problem for me. What I want is to not mount iPods only -- actually, what I really want is to not mount this particular iPod -- but if that level of specificity is not possible, then I want to exclude just iPods from mounting, without also condemning CDs and DVDs (or whatever) to invisibility.
Also, I was confused by the way the Preference is worded: It says "Show these items on the Desktop," with a series of options to check. But this phraseology seems to mean that the unchecked items will still "mount," they simply won't appear as Desktop icons. One would still have to "Eject" them using a menu command, rather than dragging the icon to the Trash -- right? Or am I mistaken, and is the Preference Pane simply badly worded, and when they say "Show these items on the Desktop," what they really mean is "mount these external devices as connected drives." So that if a category is unchecked, then they won't load as external drives at all?
But if so, then what purpose could possibly be served by inserting a CD or DVD that is not recognized by the computer? And if it isn't recognized, then it would seem that there would be no way to ever Eject the CD or DVD disk. Right?
Thus, if I uncheck that Finder Preference box you suggest, one of two outcomes will result:
-- Either CD, DVDs and iPods are still mounted, they just won't appear as icons on the Desktop; but they would still need to be Ejected via a menu command, which doesn't solve my problem.
-- Or, CDs, DVDs and iPods are not mounted or recognized by the computer at all, which means that if I insert a disk into the disk drive, it will get stuck there forever, since there's no way to Eject it, since the OS doesn't recognize that it's even there. Which is thereby a new problem.
Either way, I'd have a problem! Or...? Clarification, anyone?

Seagate Goflex external drive not mounting

Upgraded to Yosemite with no problems. However my Seagate 3tb external drive will not mount, but it is recognized in the disk utility and it is recognized on a pc but will not mount? Is there anything I can do? I tried the goflex thunderbolt dock, Ive tried usb, Ive plugged it into an older imac with 10.7 on it and it says "unrecognizable drive" and gives me options to initialize or eject. Is there anything I can use to just get these files off of here on win or osx?
I have also plugged in two 1tb drives seagate and toshiba and they both work perfectly. And, I have also updated the thunderbolt drivers and all that... I am at a loss of what to do next.

Okay found out the problem, on my exfat formatted drive, after I upgraded to Yosemite it basically created a new partition, a corrupted partition and would not mount my drive. However, I could open it and see it in Disk Utility.
Here's what I did to fix it:
Goto disk utility to see the name of you drive.
Open Terminal and type: sudo fsck_exfat -d disk1s1(this should be the name of your disk)
It will ask for your password then press, enter and it will display all files on the disk.
Then is will ask: Main boot drive needs to be updated?
Type: Yes
It will update and say that you can repair disk in disk utility.
Do that, and it will show up on the desktop.
Link to original forum post if you need more information:
https://discussions.apple.com/thread/4154638?start=0&tstart=0
Hope this helps, it was a headache for about a week but, Ive read osx does not handle exfat formatting very well.

External Hard drive and dmg files not mounting

External Hard drive and dmg files suddenly not mounting. Im running Mavericks on 27" iMac. Anyone have a fix or has anyone else suddenly had this problem? There was a Mavericks update a few weeks ago, but things were fine until today. This is weird. Ive checked in disk utility and can see one of my two external HD's, the one that I back up. But not even this will mount. Ive tried repairing HD thinking it was damaged but now see that all my ext hd's suddenly dont mount. Ive tried several mac restarts.

Solved the problem. My external HD is a WD (My Book Studio). I needed to install updated driver manager and this fixed it:
http://support.wd.com/product/download.asp?groupid=114&sid=62&lang=en
If you have a WD external HD goto the above link and search for your model and a list of updates will be shown, Yay!!

External Hard Drive will not mount

My external hard drive that I been storing all my aperture files on is not mounting to the desktop. I can see the hard drive when I use my disk utility, but it doesn’t show up in the desktop.
When I purchased the hard drive originally I didn’t format to apple but it worked fine.
Please help…
Jethro Acosta
Infocus Studio
Imac with intel chip Mac OS X (10.4.4)

Make sure the drive is powered from from its separate power source, not solely through the FW or USB connection.
If it is a dual connectivity drive, try connecting from the second method (e.g. if you are using the much preferable FW, try switching to the much-less-good USB).
Repair Permissions, even though that is fairly unlikely to have any impact.

External hard drive is not mounting via hub

Hi mates,
I bought LaCie D2 Quadra external hard drive and when I connected it to LaCie Huby firewire port it would not mount at all, but when I connected the hard drive straight to my MacBooks firewire port it mounted nicely.
what could be the problem that its not mounting with the hub?
Message was edited by: tarts

Just tested with USB and it works.
oh.. just remembered that I sync my iPod through one of the Hubys fw ports, so I guess that ports are OK.
Maybe I have a faulty fw cable?

USB 3 external drive volume not mounting on restart

I've bought an external USB 3 full size hard drive enclosure case and put in a 2TB drive. The drive is partitioned into 3 volumes. I've noticed from time to time that the volumes have gotten dismounted some how. If I unplug the USB cable and plug it back in the volumes mount again. After a long time I finally figured it out that what's really happening is that the volumes are not mounting when I do a restart, I just didn't notice it before. Once the volumes are mounted they stay mounted until the next restart. I replaced the enclosure and cable with a different and more expensive brand but that didn't make a difference. No matter what I do the volumes never mount on restart.

I think this might be due to the fact that my iMac as a fusion drive and it boots so fast that the exteranl drive isn't finished starting up when OS X is looking for drives durring it's bootup.

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External Hard Drive will not mount after upgrading to Yosemite

After upgrading to Yosemite, my external 3TB hard drive will not mount... can't see in Finder, but does appear in Disk Utility. Follow steps to Repair disk, but get a message that D.U. cannot repair disk.

See mount section.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

Encrypted External NOT Mounting

Similar Messages

Maybe you are looking for