Encrypted Profile Migration from XP to Windows 7 (Windows & Program Files Folder not Available)
I'm trying to migrate a few encrypted profiles from Windows XP to Windows 7
I have a disk without "Windows" and "Program Files" Folder with the userprofiles without a backup of recovery agent and related certificates.
By USMT or in another way it is possible a deployment and recovery (also partial) of these userprofiles folders? These data can be accessible in some way or there are lost forevar?
During USMT deployment by scanstate/loadstate cmdline tools: I used to be specify a KeyString
after the switch command "/encrypt /efs:". I can blank "/efs:" argument during USMT Deployment?
Thank you.
Sadly, without a backup of encrypted userprofiles, related data are unusable after scanstate phase.
Anyway, what
Hetti
Arachchige V Aravinda had written is very important to know when you copy or move ecrypted folder and files in a different partition or in a another disk.
Thanks Hetti
Arachchige V Aravinda for your good info and tips.
Similar Messages
-
Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365
Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserverHi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
Critical BitLocker Drive Encryption system files are not available
Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps ======= -
I read in one of the forums that I need to delete the npYstate.dll file from the Yahoo/Shared directory but this file is not available in this directory on my system. Mozilla still continues to quit when I log in to Yahoo mail.......
== URL of affected sites ==
http://www.mail.yahoo.comYup, it just copies all the information on that page to your Windows clipboard, for you to paste anywhere (email, text file, etc.).
http://en.wikipedia.org/wiki/Clipboard_%28software%29 -
I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?
Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
Hi,
I am trying to get all web parts from our sharepoint site by calling web service method GetWebPartProperties of WebPartsPages service. The method works fine for the root page (Home Page) but for pages in sub site i get this in the xml
node, Outer XML - <WebParts xmlns="http://microsoft.com/sharepoint/webpartpages"><!--The file is not available. Either the file does not exist or it cannot be edited from its current location.--></WebParts>. I am struck here.
Please help me understand why i am getting this?
Regards,
KalimHi,
We can do as follows:
1. Mark sure the page URL is correct.
2. Check whether current user has permission to access the page.
3. Use SPServices to get web part properties.
http://spservices.codeplex.com/wikipage?title=WebPartPages
Best Regards
Dennis Guo
TechNet Community Support -
download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3
As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions? -
How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?
How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?
Souvent eu ce problème,
Je cree un dossier sur le bureau et glisse les photos à partir d'Iphoto dans ce dossier. Ce geste a pour effet de creer des copies dans le dossier.
Il ne reste plus qu'à selectionner ces photos pour les envoyer en pièces jointes. -
Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.
The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.
-
I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????
Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene -
I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?
You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O. -
Critical BitLocker Drive Encryption system files are not available- which was working earlier.
Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud HussainHi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SAP R/3 4.7 Migration from HP-UX to Windows
Hello Everyone,
I am doing migration of 4.7 system from HP -UX to windows.The export completed successfully but I am stuck during the import phase (Database upload(Post processing) .All the log files in sapinst directory shows the code page error as below.
>>>DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(CNV) ERROR: rscpMCInit rc = 2048
----2-
code: 2048 RSCPENOCONV
convert MDMP to Unicode during export only
module: rscpexmh location: 4 line: 460
TSL01: CQI p3: MDMP&->&1100&during export only&&
E:\usr\sap\DRP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\DRP\SYS\exe\run/R3load.exe: END OF LOG: 20110112183108
>>>
I had followed the step "System copy of MDMP systems" from Note
Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2 ,,,but still it is failing at the same step and the Dialog.xml is overwritten with the original as it was before modifying.Not Sure where exactly the problem lies.Can someone please help.
Original :
<field sid="fiDBCodePage_i" highlight="false" enabled="true">
<caption>DB code page</caption>
<whatsthishelp>The DB code page or rather the code page used by the DbSl interface on the platform where R3load is run</whatsthishelp>
<value maxlength="4" minlength="4" type="numeric">1100</value>
</field>
<field sid="fiNumberOfJobs_i" highlight="false" enabled="true">
<caption>Number of parallel jobs</caption>
<value maxlength="4" minlength="1" type="numeric">1</value>
Modified to before starting the import as per the above Note:
<field sid="fiDBCodePage_i" highlight="false" enabled="true">
<caption>DB code page</caption>
<whatsthishelp>The DB code page or rather the code page used by the DbSl interface on the platform where R3load is run</whatsthishelp>
<value maxlength="4" minlength="4">1100</value>
</field>
<field sid="fiNumberOfJobs_i" highlight="false" enabled="true">
<caption>Number of parallel jobs</caption>
<value maxlength="4" minlength="1" >1</value>
Modified at two places in dialog.xml file, the SAP note doesn't mention "1100" in Dialog.xml as it currently shows in my Dailog.xml ,Not sure if I have to remove that too and start the import again from begening.
While export I had given "1100" as the code page and before starting import I modified the xml by removing the "Type numeric" and later during the import in selection field I couldn't enter the "MDMP" as it is allowing only numeric values.
Thanks
Edited by: Khaiser Khan Mohammed on Jan 15, 2011 7:10 AM
Edited by: Khaiser Khan Mohammed on Jan 15, 2011 7:58 AMI already checked in SMLT tcode ,My system is MDMP .I passed that error and now I am getting this
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname = "D3320110118070143 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "SAPTST2K3E32 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SAPTST2K3E32"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 29 Step 1)"
(VK) ERROR: invalid migration key
E:\usr\sap\D33\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\D33\SYS\exe\run/R3load.exe: END OF LOG: 20110118215221
any idea on this?? -
Migration from sun/solaris to windows
While performing a migration of SAP from solaris to windows OS what are the implications, issues and things to keep in mind. Also which database would give the best performance (Oracle or MS SQL) and what are the specific requirements if latest release of MS SQL is to be used the database.
> That is fine but I rather need to know that if the database is changed from Oracle10.2 to MS SQL 2000 then what can be the implications and what will be the additional hardware requirements, if the current SAP configuration is 4.6D and it is migrated to 32 bit windows server 2003.
Why do you plan to use the almost 10 year old SQL Server 2000? It's like going back to Oracle 7.x times! SQL Server 2005 would be the way to go.
> Whether shifting to MS SQL server 2000 would give an added advantage?
Advantage for whom?
- Oracle is expensive, the licenses and the annual maintenance is higher compared to SQL Server
- Oracle is complex, SQL Server is much easier to maintain
- Windows adds an additional risk (Virus, Malware) which is has to be dealt with separately (Firewalls, Virusscanners etc.) which in turn is additional work and hence costs additional money
- Windows is not always a deterministic operating system ("it works again after reboot, nobody knows why")
> My job is to give the pros cons of both configurations.
I would do some research what both combinations are able to do, if you need certain Oracle features that are not available on SQL Server, if you developers and administrators are more convenient with Oracle, if you have specific requirements about performance that can't be fullfilled with SQL server etc.
All that are things you have to evaluate and check. Since we don't know how you use the system and what you do with it we can't tell you what's "best" for your environment.
Markus
Maybe you are looking for
-
How do I update podcast title, artist & artwork without affecting URL or subscribers?
Is this possible? I currently produce an iTunes podcast entitled "The Drop" (https://itunes.apple.com/us/podcast/the-drop/id491023811). The listing is currently as "The Drop" by "15 STEP & mass7." I'd like to update this listing to "The Drop Radio"
-
Hi all, i have a mac mini early 2009, the sound dont work and i run apple hardware test and show me following error 4mot/1/40000002 master-0 Any ideas to solve it or explaint what happen? Thanks for the help
-
If I create a slideshow in iPhoto & import to iDVD, can I add the imported images from the slideshow to DVD-ROM
-
Method ResetRelease of object BUS2012 is hanging in background
Hi, We are using PO release Workflow, when some approver reject the PO, another workflow triggers which will reset the release strategy. But the method ResetRelease of object type BUS2012 is hanging in background, it is showing in process status, and
-
I really want to update my iMovie, but I guess I need to update a lot of things first, which costs a lot of money. Is there any way I can just update iMovie and nothing else?