Encrypting files 1 of 1 - C:\rms\test.pdf ... Skipped, file not supported

Dear All ,
 I has 1 AD (Windows 2008R2) , AD RMS windows 2012 
i use AD RMS Bulk Protection Tool to Encrypt file and i has log 
Encrypting files 1 of 2 - C:\rms\test.pdf ... Skipped, file not supported.
Encrypting files 2 of 2 - C:\rms\Test1.docx ... Failed, Unknown Reasons..
RMSBulk.exe /encrypt  "C:\rms"  "\\10.30.1.1\Public Share\RMSTemplate\Read_Only.xml" [email protected] /log C:\Logs\RMSBulk.log
-- Coding for life --

Hi VUPV,
Why don't you use RMS Sharing App to that? AFAIR you can select multiple files and click to protect them. And I guess it works from command line as well... (to be checked)
If you need to use RMSBulk.exe tool - what happens if you try to protect the docx manually (from the Word itself) using the same user?
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Similar Messages

  • I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported?  I am on a Mac using Parallels 6

    I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6.  before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume.  The file system of this volume might be damaged or not supported.  How do I increase the size??  I just also did a disk repair utility with Apple on the Apple side of my IMAC.  Please Help!!   I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

    This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
    Have you checked the XP file system while running the Parallels XP yet ?
    However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
    Stefan

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • How to save an illustrator file that contains gradients as a pdf print file without the gradients streaking on the print

    When I create files in Adobe Illustrator, Photoshop, and Indesign if the design includes gradients and I save or export it as a pdf for print, whenever I have the file printed the gradients often come out with lines and streaks in the print. I usually work around this by copying the gradient to a file of its own, save it as a jpeg, and then insert the jpeg back into the original file before saving it as a pdf. This can be a big hassle and I was wondering if there's a setting in illustrator, photoshop, and Indesign in order to avoid the hassle.

    You would have to check your color management and things like overprint settings or the ink levels of the color components. Streaking is usually a sign of areas getting oversaturated and the automatic adjustments in the printer driver being unable to compensate. and then of course other factors may figure in like banding inherent in using gradients across large areas, out of gamut issues for certain colors and what have you. You'd have to be much more specific about all of that for anyone to even begin to advise specifically...
    Mylenium

  • My new iPhone 4s paired with my iMac but it will not connect to transfer files by bluetooth. It says the iMac is not supported!

    My iPhone 4s will pair sucessfully with my iMac, but it will not connect so that I can transfer files via bluetooth. It says "bluetooth network not available" or "iMac not supported". Just insane. What to do now??

    I can't pair my iphone 4s with my imac.  It is very frustrating.  I can walk by anything resembling a  bluetooth and my iphone with pair...but not with my mac.  Any assistance would be appreciated.

  • MJB: when I try to open a pdf-file within Firefox, a message tells me this is not supported

    When I go to a webpage that contains a pdf-file, Firefox tells me that "The Adobe Acrobat/Reader that is running cannot be used to view PDF files in a Web Browser. Please exit Adober/Acrobat/Reader and exit your web browser and try again.
    It is ONLY in Firefox that I get this message, IE and Crome works fine.
    == Operating system ==
    Win XP pro

    Please follow this Adobe TechNote[http://kb2.adobe.com/cps/405/kb405461.html Error "The Adobe Acrobat/Reader that is running cannot be used to view PDF files in a web browser"] and see if it helps.

  • Report in PDF format can not support double byte character ?

    Hi :
    I am developing the simplified chinese application , when i generate the report in PDF format , i found all double byte character did not display correctly . i am using dev6i+patch5 , why ?
    it is a bug of form or not ???????
    HELP !!!

    try this ,Install acrobat4.0 or above and make sure you got acrobat distiller which will add a acrobat distiller printer in you windows. print report direct to that printer (don't change desformat) and you should got your PDF file with correct font setting.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xie min ([email protected]):
    Hi :
    I am developing the simplified chinese application , when i generate the report in PDF format , i found all double byte character did not display correctly . i am using dev6i+patch5 , why ?
    it is a bug of form or not ???????
    HELP !!!<HR></BLOCKQUOTE>
    null

  • 12.1 - AddMultiPageBitmap Rule  - UNIX - PDF & Word Doc Not Supporting

    Hi
    I am trying to add a word/pdf document using the AddMultiPageBitmap Rule in Documaker 12.1 in Solaris . We use the PDFPrint Driver for generating the PDF Output. I see that rule works properly when we have a Tiff file to be added.
    When we trying adding the PDF document , we don't see any error but the document doesnt get added.
    For the word doccument , we get the below error and the document doesnt get added either:
    DM20316: Error in AddMultiPageTIFF: An error occurred while attempting to load or include images from the TIFF <../mpath/eup.doc>.
    Do we need to add any options in the INI file to support PDF/Word Document. Also the error files refers to "AddMultipageTIFF" even though we have used the AddMultiPageBitmap in the section.
    Rule : ADDMULTIPAGEBITMAP
    Data : File(../mpath/eup.doc)
    We tried using the Type option for the PDF document as below , Not sure what should be used for the Word Document.
    Rule : ADDMULTIPAGEBITMAP
    Option I : Data : File(../mpath/eup.pdf) , TYPE(P)
    Option II : Data : File(../mpath/eup) , TYPE(P)
    Thanks in Advance.

    Hi Steven
    You got it absolutely right. I set the TGC variable to the direkctory where the software was copied and it was able to import a PDF. As per the 12.0 rulebook(Page no :285: http://docs.oracle.com/cd/E17552_01/rul_book.pdf), the rule is expected to work for the .DOC file type (Microsoft Word). But when I try using a word document , the rule doesn't import the word doc. I tried the below options and none of them doesn't work.
    Option 1: File(/../eup.doc)
    DM20316: Error in AddMultiPageTIFF: An error occurred while attempting to load or include images from the TIFF </../eup.doc>.
    Option 2: File(/../eup)
    DM20316: Error in AddMultiPageTIFF: An error occurred while attempting to load or include images from the TIFF </../eup>.
    Option 3: File(/../eup) , TYPE(P)
    No Error. But the word document doesnt get embeded in the PDF.
    Option 4: File(/../eup.doc) , TYPE(P)
    Error Type: syntaxerror
    Current Object: nostringval
    Module: psiparse.c
    Line Number: 203
    File Offset: 0
    WARNING: size==0 @ sysalloc.c # 251
    Unable to allocate image buffer
    Also the infomation to import .DOC file type is available only in the 12. Manual . I couldn't see the support for .DOC type explicitily mentioned in the 12.1 rulebook.
    Please advise.
    Once again , thanks a lot for your timely responses.

  • Acrobat XI PDF maker files missing

    Have just installed XI. I run Win7 and 32bit Office 2010. PDF export ribbon in showing in word and you can create pdf from this.
    The problem arises if you use the right click 'create pdf' function. More importantly, when using the merge multiple files to PDF function. In both cases it works ok with excel but fails on word (in the case of the merge multiple file function all other types f file go in but the word file fails)
    I get he message 'PDF maker files missing'. It suggests a repair that I have tried but that doesn't help.
    I have checked the COM add in isn't disabled. It's not.
    Just can't get this working. Help!!!

    Is it that none of the right click options are not working (Create PDF, Create PDF and Email or Combine only)?
    Try converting the word file by dragging and dropping the file to Acrobat interface/icon.
    Are you able to convert the word document to PDF from Acrobat Ribbon (Acrobat-> Create PDF) from within the word application?
    Is the issue with a particular word file or happening with all the word files?

  • How do I maintain high resolution of my Publisher file when I convert it to PDF?

    How do I maintain the high resolution of my Publisher file when I convert it to PDF (I do not have access to a PostScript printer). Am I correct in understanding that the simple answer would be to convert the .pub file into a .ps file and then save this as a PDF?  Which is no use to me because every time I try to convert my Publisher file to PostScript, the process fails because it is looking for connection to a PostScript printer. I need to send a high resolution (minimum 300dpi) PDF version of high resolution MSPublisher files to a commercial printer. And time is running out!

    Hi,
    The version set information and the tag hierarchy are stored within the catalog. It sounds as though you haven't brought over the catalog from your old computer.
    The recommended way to transfer elements from one computer to a new one is to use the Backup catalog to CD, DVD or Hard Drive on your old system and then use Restore catalog from CD, DVD or Hard Drive on your new system. Is this how you did it?
    That should have preserved your version sets.
    Brian

  • "This type of file is not supported" - Premiere Elements 9

    I've recently begun learning to use Premiere Elements 9, but I've run into a problem. I am trying to import videos that were recorded with a Canon G9 DSLR camera. I can add them to the Orgnizer and view/watch them from there, but when I try to drag them from the organizer to the timeline in a project, it says "This type of file is not supported, or the required codec is not installed".
    I followed the instructions on this page:
    http://forums.adobe.com/thread/415317?tstart=0
    and used Super to convert one of the videos to a DV Digital Video file using the default settings as the instructions explain. It output a file with the extention ".avi.dv" which seems to have the correct attributes. However, I get the same error when trying to drag it into a project timeline - "This type of file is not supported, or the required codec is not installed".
    Am I doing something incorrectly? I've tried several different project files settings (including DV 48kHz) but this happens in all of them.
    I'd greatly appreciate any help anyone can give me. I'm hoping I'm just doing something wrong.

    Steve Grisetti wrote:
     When you start a new project, click on the Settings button. In the preset panel, open the DSLR options and look for settings that match your specific video.
    I tried that, but the videos' resolution is 1024 x 768 at 15fps, which doesn't match any of the DSLR settings. The camera can record in 640x480 30fps, but the only setting with a matching resolution is 60fps, and it gives the same error when I try to drag in a 640x480 30fps video in the 640x480 setting.
    In any event, can't you import and use any video file (avi, wmv, mov, etc) in any project regardless of the project's setting? I tried converting the videos to .wmv format with the same resolution (1024 x 768) but at 25fps and was able to import and work with them in that format perfectly. It just won't let me import them in their original .avi form or in the Super©-exported .dv format.
    the_wine_snob wrote: Though my wife has a Canon G-10, I cannot recall the exact CODEC that is inside the resultant MOV format files ...If you are getting a "missing CODEC" message, then it is likely that you either do not have the proper CODEC installed, the installation is corrupt or that PrE cannot work with that particular version.
    The G9 outputs .avi files rather than .mov. I don't know what codec they use, but the codec is installed and functioning because the videos can be played in any player on this computer (eg Windows Media Player), and can also be played within the Premiere Organizer screen (where you import them and create libraries). I just can't preview/play them in the project window, or drag them to the timeline (it gives the missing codec error in both cases).
    Regardless of that, when I convert the video to DV-AVI format in Super© using the default settings as recommended by the link I posted, shouldn't the resulting video be useable regardless of its original format? It exports with the extension .dv.
    However, either I was mistaken before or something has changed, because now I can't import the .dv files at all (it isn't even listed as one of the supported file extensions in the import dialog box dropdown menu, and if I chosoe "all files" and try to import it it gives the "not supported/missing codec" error). Windows 7 also is not recognizing the .dv file as videos, and although I can play them in Windows Media Player, I first have to OK the error message that it doesn't recognize the file extension but "may still be able to play it" (which it does). I assume a DV codec must be installed, otherwise it wouldn't be able to play the converted videos at all.
    Am I missing something? Is ".dv" the wrong extension? The tutorial says it's "DV-AVI format", but if I change the extension to ".avi" the files won't play at all.
    Hopefully this makes sense, as you can tell I'm very new to this and am not yet familiar with all the files types / extensions and resolutions etc.
    EDIT: The program MediaInfo reports the .dv files exported by Super© are:
    Format :
    DV
    Format_Commercial_IfAny :
    DVCPRO
    at 720x480, 29.970fps with Windows PCM audio.
    It says the original .avi files are JPEG format with Windows PCM audio.

  • I have a Nikon D7100 I have tried to open a raw file but it staes it does not support the format. I am up to date on all downloads.

    I have  Nikon D7100 and shoot in raw. I have tried to open a raw file in elements 10 but it states it does not support the format. I also have a D800 and these open file in elements camera raw. Can anyone help please?

    Hi,
    You need version 7.4 or higher to read raw files from, a D7100. Unfortunately, ACR 7.4 is not compatible with PSE 10.
    You need to either
    - update to a new version of PSE or
    - download the DNG converter - use it to conver your NEF files to DNG files which can then be read by PSE 10.
    DNG  Converter 8.4
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
    MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
    DNG Converter 8.3 (if running on XP or Vista)
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
      Good luck
    Brian

  • Canon .MXF files "Not Supported"

    I sent a project file over to a colleague to help out with an edit, and we're using .MXF files from a C300. I created the project file and imported the clips, everything was fine on my end; my colleague was able to open the project and locate the clips, but when she tried to connect the clips to the Premiere project file she was told that the .MXF clips were "not supported". Can't understand why, considering we're both using the latest version of Premiere Pro CC and the same clips - and they worked fine for me.
    I'm using a PC and she's using a Mac - not sure if that has anything to do with the problem...
    Any help would be greatly appreciated, thanks!

    Hi Kinbote,
    See if this article helps you: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ho w-to
    More info: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    Thanks,
    Kevin

  • Hyperlinks in FrameMaker 8 File don't work consistently when PDF'd

    I have a FrameMaker 8 file with internal hyperlinks. When I test them in FrameMaker they work but when I PDF the file SOME of them are not working. I'm using Acrobat 8 as well.

    This thread may be dead already, but I'll chime in anyway....
    Kelly (response #5) touches on something that I think is important:  character style changes in a heading or other paragraph style (such as table title) can cause the link to end at the point where the character style changes.
    For example, consider a heading containing italics:  "Configuring the Merlin System."  Whether the hyperlink is broken depends on how you apply the italics:
    If the italics are applied using a named style such as Emphasis, the hyperlink breaks at the "M."  "Configuring the" is hyperlinked, but "Merlin System" is not.
    If the italics are applied without assigning a character style but only by setting Angle to Italics in the Character Designer, the entire heading is hyperlinked.  That's the good news.  The bad news is that your italics are missing in the TOC.
    This behavior is not necessarily buggy.  It is required, in fact, for creating hyperlinks manually:  you mark your text with a named character style and then create a "hyperlink" marker in it.  What would be nice is if Adobe would separate the feature into two flavors:  one that works for generated links regardless of character style, and one that works in its current form for user-created links.
    Fixing bad links:
    If you have Adobe Acrobat Professional, use Tools > Advanced Editing > Link Tool.  It draws a box around each link.  Drag the box handles to resize a link around the proper area.

  • When I open a pdf file, Firefox opens a blank window, then the file opens in a Adobe Reader window. How can I stop the blank window?

    Whether I am using Firefox 3.6.8 or Thunderbird 3.0.6, clicking on a pdf file opens a new window. After a few seconds the pdf file opens in a separate Adobe Reader window. When I am done with that and close it, I still have to go back and close out the blank window. Got to be a configuration issue some place. I have tried several settings under Tools/Options, but haven't found the right setting yet. Any suggestions?

    Thank you very much for the reply. I followed your instructions. This fixed half of the problem. Links to pdf files that are on web pages now come up with a box that asks if I want to open or save the file, without a blank browser window in the background. That is great.
    When I tested the fix with pdf file links in email, the problem still exists. I tested links in Outlook Express, Yahoo mail, and Gmail. Any time I click on a pdf link in an email, a blank Firefox window opens and then I get the small window that asks me if I want to open or save the file. Sounds like this is a configuration issue, not a technical problem. Thanks for your help.

Maybe you are looking for