Encrypting my linksys WRT110

i'm not a guru of computers or routers
i have comcast wireless/cable hooked up to a linksys WRT110
what do i have to do to encrypt the mac address?

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to anything by Linksys. I suggest you contact Linksys support.

Similar Messages

Connecting to a Linksys WRT110

I just purchased a Mac Book Pro running Mac OS X 10.6 and am trying to connect it to my wireless network. I have a Linksys WRT110 router with version 1.0.03 firmware running WPA2 Personal TKIP or AES encryption. When trying to connect from my Mac, I get an "Invalid Password" error. I've entered and re-entered the password several times to no avail. Any ideas?
Thanks

Thanks Sig..wish I could say that solved it, but I'm still getting the "Invalid Password" error. I'm using a 63 character ASCII password with WPA2 personal. I saw some info in other posts about using the $ sign for hex passwords with WEP and enclosing ASCII passwords in quotes for WEP as well. I tried the quotes with my WPA2 password and it would not even let me save the password.
Any other thoughts?
Thanks

Linksys WRT110 Wireless Router

I need to setup my Linksys WRT110 wireless router for wireless use as well as a router between my cable modem and my desktop PC. So far, I cannot find any documentation on how this is done or if it is possible at all. When I called Linksys support they told me it can be done and provided me with a link to the instructions, however, they did not work. Does anyone know if this is possible? I need to setup in order to work from home and I cannot use a wireless connection to my cable modem but I need a router between my desktop PC and my cable modem. Oh, by the way, I have a new HP desktop which is running Windows 7. I would appreciate any help someone can lend me. Thank you. SHH

From what i read on your post looks like your trying to use your wrt110 as a wireless access point and you want to still use your router near your modem.
To do this what you have to do is disable your wrt110 as a dhcp server since your other router near your is acting as the dhcp server.
So what you do is hook a cable to your wrt110 in port 1. type in 192.168.1.1 in the address bar of your internet explorer.For now this 192.168.1.1 number will get you into the wrt110 until you change it to 192.168.1.5 under setup you will see 2 areas. Under the ip address type in 192.168.1.5 so this make your wrt110 have this ip address.
Below that you will see DHCP server setting disable this. So your wrt110 will not act as the dhcp server it will act as a wireless access point.
Now if you type 192.168.1.1 in your web brower that will open the configuration screen of the router next to your modem. Which that dchp server setting will be enabled.
So basically from your modem your first router will route the signal from the modem thru the router to the computers hooked to it. then say you run a cable from that router to the wrt110.So basically your just uplinking to the wrt110. only thing is your wrt110 will have to act as a access point instead of a router.
Your main router configuration screen to get into it. you would type 192.168.1.1 in your brower after you setup your wrt110 an disable the dhcp server and set the ip to 192.168.1.5 when you type this number the 105 number in your browser it will go into the web config screen of the wrt110
So to access the web config screens of both routers they will have different numbers.
1st router by your modem will be 192.168.1.1
2nd wirless one will be 192.168.1.5 which you changed when you when in and disable it as a dhcp server since your 1st router by your modem acts as the dhcp server.
Hopefully this will help. I know it does get a little confusing been there and done that more then once. If not call linksys on the phone tell them what products you have and how you want it to work they will walk you thru it.
My setup in my home from my modem it connects to a 4 port router, then from there to a 24 port switch then uplinks with a Power over Ethernet adapter which sends power thru this little adapter over the brown pair in the cable so you dont need a electrical outlet where you put your wireless access point/router. Then from my switch it uplinks with that POE to a Wrt110 upstairs in my home. I know what a pain this can be i've call them more then once to get mine setup and working.
GOOD LUCK HOPE THIS HELPS

Unable to connect to home network using a Linksys WRT110 router

I recently had to upgrade from a Linksys G router to a new router--the Linksys WRT110. I was able to connect to the WiFi using my Palm TX prior to doing a firmware update to the Linksys WRT110. Now, my Palm TX doesn't even recognize that there is a network. I put the network name in manually and it still won't connect. I don't know what else to do! Incidentally, my home computer and my laptop connect to the router wirelessly just fine. I appreciate any help that i can get to enable me to use my WiFi on my Palm TX at home.
Thanks.
Post relates to: Palm TX

Please read through the Wifi Checklist at the top of this section for some hints.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Linksys WRT110 keeps disconnecting

I have a Linksys WRT110 and it worked fine for about the first year or so, but recently it has been intermittenly droping the signal to the point of no connection at all. Is there an update or anything I can do about this? I contacted tech support, and conveniently since my warranty is up I have to pay for their help with this...
(Mod note: Off topic remarks removed. Thanks!)

It would drop it when I was using my iPhone and when my wife used her laptop. It was very intermittent and never stayed offline for the same amount of time. Sometimes it would be less than a minute, sometimes more. Occasionally I had to turn wifi off on my phone, then turn it back on just to get the wifi going again.
It was dropping the wired connection a few months back, but it got solved on here. Had to to a complete reset.

New Toshiba wireless turns Internet connection off (thru Linksys WRT110)

I "commissioned" a new Toshiba A660 (customized) yesterday. We have a DSL line with Motorola modem and Cisco Linksys WRT110 router with one Cat5-connect. For a brief period the Toshiba could access the Internet thru the wireless (I registered the computer and the Norton AntiVirus.) Subsequently I "activated" or allowed the Toshiba to self-install Bluetooth (built in, but, it appears, not listed in the device manager).
Before the afternoon was over I found that the Toshiba, with WiFi antenna "on" effectively killed my Internet connection. My Dell, which was hardwired thru the Cisco could not get to the Internet; my Mac, which works wirelessly, could not access the Internet. When I turn the Toshiba's wireless antenna OFF, Internet access to the other two computers is restored within 45-60 seconds. This situation persisted after a "Restore to Factory" procedure this morning, where the Toshiba killed our Internet access during or shortly after the "configuring the desktop" portion of the hour-long restoration.
Another call to, and call-back from, Toshiba tech support resulted in their suggestions that 1) I should see if my computer crashes someone else's Internet connection and 2) that it must be the Cisco.
The Toshiba behaves itself when connected to the Cisco via Cat5 (as long as the wireless antenna is not turned on).
So, Cisco, Do I need a router upgrade to keep the Toshiba from killing my Internet connection?
Pat (and James)
Solved!
Go to Solution.

If your new computer is running windows 7, disable IPv6 under LAN properties for both the wired and wireless adapters. Reboot computer and connect again.

Zoom X5 GS Ver 2.1.0 & linksys WRT110

All I want to do is hook up a wireless access piont, but no matter how I seem to hook it up, the WRT can't find my zoom ...... getting ready to chuck both out the window and just watch tv.. I've just toasted away 6 hrs, The zoom is hooked to verizon, using a network ID of 10.0.0.2 and works just fine, I can plug in my pc to any port and works great, I can post my settings page on here..............
LAN Configuration System Mode:   Routing Get LAN Address:   Manual
External DHCP Server
Internal DHCP Server
Actual LAN IP Address:   10.0.0.2 Actual LAN Network Mask:   255.255.255.0 Conf. LAN IP Address:       Conf. LAN Network Mask:       Speed:   100BT Duplex:   Full IGMP:   Enable
Disable
MTU:
its also set to dhcp server, again, I just want to add the linksys as a WAP, but I can't get it to connect to the zoom, anyone got a suggestion? I hate networking.....never learned enough about it to do it right. Let me know if you need any other shots or info from the set up screens. thanx

the wireless is a wrt110, I had to totally unload all software and reload everything and then it picked the linksys up, so problem has been solved thanx anyway

Linksys WRT110 Wireless Dropping

Hi,
I'm having a really frustrating problem and would be really grateful for some assistence:
Set up:
Router: WRT110
1 computer connected via ethernet cable
1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
Thanks for your time,
Daniel

On all your Win 7 computers, disable IPv6 under LAN properties for both wired and wireless adapters, reboot.
In the router disable UPnP. Under wireless settings Beacon Interval 50, RTS and Fragmentation threshold 2304. Set to channel 1. Save settings. Now try.

Linksys WRT110

I'm trying to connect my xbox 360 with a linksys router and that's going fine, but when I play online i lag out or get connection interruped midway through everytime. I tried open up some ports(Not sure if i got the right ones) And also tried DMZ that's no working. So I dunno what else I can try. I need some assistince.
Any Suggestions?

Have you done the procedures here?
CLICK THIS
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Problems with my router cisco linksys wrt110 and my android cellphone and android table

i updated my router from 1.0 to 1.07 and one week later my phone and my tablet both with android 2.3(phone) 4.0(tablet) connect to the router wireless but don't navigate internet, they connect to google.com sometimes and if i do a search it bring it but if i try to open any of the search it doesn't open. and they connect to google play but doesn't download any app. if i open any app that needs to connect to internet it doesn't connect either. My wife has a blackberry phone and she doesn't have problem with internet connecting to the wifi router, i have a pc with windows 7 and connect wireless too and either connect to internet without problems. It's only happen with android. i download terminal app and i ping different web pages and respond by name and by ip but when i go to internet app and try to connect it doesn't bring the page. i don't have firewall and the firewall of the router i disble it but the problem persist.
i factory reset the router and my phone but problem persist. i set static ip and nothing. my cellphone and tablet connect to internet fine in others wifi routers. What else can i do? should i downgraded the firmware to the router? if it is so where can i download a previous version of the firmware and what are the steps to install it?

If the other wireless devices are working fine connected to the router, then it might be that the Android phones and tablet needed to be configured properly. Had you tried to use another web browser on the problem phone and tablet to further isolate the issue? Had you tried to connect the phone and tablet to other wireless network and check if you still have the same issue? Please try to make sure that you are connected to the router’s main wireless network. And please try to delete preferred wireless networks, including your wireless network, on the phone and then try to reconnect.
Check this link for your reference:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ac433a5ab0944f4e9f43338a8dd32465_Removing_a_networ...

Linksys WRT110 firmware problem

I have been trying to update the firmware on this think for ages. I bought the router because I had problems with other brands and heard this was the best brand for gaming. With all the complaints lately I think this sentiment has changed dramatically over the past couple of years. I have had problems with this router turning of UpNp for no reason, so I thought maybe updating the firmware might fix it, but it won't even let me do that...
It just keeps saying please designate path of update even though I picked it a hundred times.

I understand you're having difficulty upgrading your router's firmware. I have encountered the same problem when I was using Firefox to download the firmware. But the upgrade was done successfully using Internet Explorer. Follow this link to learn more about udating the router's firmware.

WRT110 with Intel WIFI Link 5100

I have just bought a Dell laptop with a Intel WIFI Link 5100 Wireless-n Mini Card. Went and bought a Linksys WRT110 Wireless N router. It worked fine for a couple of weeks now, it's losing connection all the time. I have a Dell PC that is also connected to the router and I have a connection but it's wired not wireless. Any ideas will be helpful?

Try this :-
Download Firmware 2.77 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Adjust Wireless Settings -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
If you keep loosing the wireless signals, then you should download and upgdate the drivers for your wireless adapter...

Linksys works on windows but not mac

I am running boot camp on my early 2009 MBP. I have not been able to connect to my wireless for about 9 months using os 10.6.4. If I switch to windows 7 on the same computer I can connect to it with no problem. Why is this? I have tried everything to get os10.6.4 to work and nothing has worked. I have scoured these forums for solutions and nothing works. Any clues would be great? the router is a linksys WRT110. It finds the sig and shows it connected Green indication and all but its not really connected. Evil trick I think.

"...I have not been able to connect to my wireless for about 9 months using os 10.6.4..."
In as much as 10.6.4 has not been out for 9 months let's just start with the easy stuff. Have you the latest firmware for the router? How are you protected security wise? WEP, WPA,etc... Can you connect via an ethernet cable? Can you connect without any security protection? What happens when you try to connect to the web? More pertinent info will always help.

Conecting 2wire AT&T modem to Linksys Router

Please help. International tech support has hung up me 3 times. I am looking up a simple Linksys WRT110 Router to an SBC/AT&T 2wire modem. The modem is hooked up to the wall using a coaxial TV cable. Thus, I assume that this is a cable modem. When I run the Linksys provided setup software, it "detects" a router already in place and advises to connect the Router internet port to the existing modem Local Ethernet 1 port. Whatever the case, it doesn't work after conclusion of the setup.
any suggestions?

2-Wire AT&T Modem is suppose to be DSL...Don't run the cd...Kindly follow this link

WRT110-EU with D-Link DSL-320T

Hi, I have just bought a Linksys WRT110-EU router, to work with my D-Link DSL-320T ADSL modem. The computer works well with the DSL-320T, but I do not seem to be able to configure the WRT100 to work with it. I am using the EasyLink tool, and I cannot get it past the step of setting up the WAN interface. I guess I am missing something, probably in the configuration of the DSL-320T, but I cannot figure out what to do. The output from ipconfig /all, on current connection (DSL-320T modem only) is below: Windows IP Configuration Host Name . . . . . . . . . . . . : pcbport1 Primary Dns Suffix . . . . . . . : ualg.pt Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : ualg.pt Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC Physical Address. . . . . . . . . : 00-1B-38-AC-48-DB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 151.32.20.144 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 193.70.152.15 Lease Obtained. . . . . . . . . . : terça-feira, 7 de Outubro de 2008 00:55:05 Lease Expires . . . . . . . . . . : terça-feira, 7 de Outubro de 2008 00:56:05 Any help will be appreciated

Check these two settings on your computer (1) If your computer has a static ip on it .Click on the Start button >>> Settings >>> Control Panel >>>Network
Connections- Right click on th icon for Local area connection and go to
properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Check if it is set to Obtiain and IP . (2) On network connections check if have any other ICON than Lacal area connection Lan or high speed internet. and wireless network connection or 1394 connections disable it. Then try the CD set up.

Encrypting my linksys WRT110

Similar Messages

Maybe you are looking for