Encryption bit of Lotus Notes ID files

Hello All
Prior to implementing OIM, the user.id files were being created with an encryption rate of 630 bit (compatible with all releases).
However after OIM the ID files are now being created with an encryption rate of 1024 (compatible with only certain version of Notes).
Is this a setting within the Lotus Notes connector? If so, where can I find that?
If not, any ideas as to where this setting is located?

Have you checked the connector documentation?
The logical place to keep this setting would be the IT resource but it is likely this is hard coded in the connector code or potentiall just set by default on the Lotus side. Jad will help you with finding out if it is in the connector.
Hope this helps
-Martin

Similar Messages

How to view of damaged lotus notes nsf file?

After the restoration of utilities through almost all the bases when opening throw an error "File is not database", "File
does not exist" or "Database is corrupt - Can not allocate space".
How to view of damaged lotus notes nsf file?

Hello Rzher,
The forum is for MS Office related questions. I'd recommend asking Lotus Notes related questions on the
IBM forums instead.

What do view of damaged lotus notes nsf file?

A disc that was formatted lotus base. After the restoration of utilities through almost all the bases when opening throw an error "File is not database", "File does not exist" or "Database is corrupt - Can not allocate space".
What tools can be used to restore a disk utility to repair nsf-file. What do view of damaged lotus notes nsf file?

If you see an error "File is not database" then try to use the program to restore the
NSF Viewer Tool from http://www.nsf.viewertool.com/
as well as detailed information look here
http://www.filerepairforum.com/forum/other/other-aa/lotus-notes/1122-can-i-restore-corrupted-nsf-fileand

Servlet for reading lotus notes nsf-file via corba-interface

Hello,
we have written a servlet for reading lotus notes nsf-file via corba-interface.
So we can read lotus notes-files in a portal url-iview.
Are you interested?
Best regards
Oliver Prodinger

If you check out the thread from my question (524480), we found
that we had to enable the IIOP task on the domino server as we
were not running it, this cured the problem I think you are
encountering.
This has not solved all our problems as I only see Notes data in
the Inbox Portlet Preview mode, this problem is refered by other
contributors as the collapsing Portlet problem (496625) and I do
not know whether there is a solution to this problem yet.
Hope this helps.

Importing Lotus Notes .NSF files into iPhone

Does anyone know how to import LN .NSF files into the iPhone?

you will need to purchase on of the NSF to EML or NSF to Mbox programs that are available on the web

Lotus Notes Backup data .nsf file corrupted

Hello friends,
One of my users backed up data (nsf file) of Lotus notes got corrupted. The file size is 4 GB. Now the user is asking me to retrieve the data (mails) and i am not able to find any utility.
Anyone having idea about any such free utility / tool to repair corrupt .nsf file.
Thanks in advance.

Lotus Notes Database data corruption usually occurs when the software application or the operating system crashes while the .OND data file is open in memory. In most cases, headers or parts of the data file are not saved to disk causing the data
corruption or the application to fail. There are ways to recover all or part of your data file. U should immediately make 2 or 3 backup copies of the corrupted OND file(s) and stop using the computer except to send the file(s) for recovery analysis.
There is a very good tool NSF Repair Kit such is powerful that repairs & Recovers Lotus Notes NSF file & restores them in original format to any user-intended location.
1. Make a new copy of the database and deselect Access Control List in the “Specify What to Copy” section of the Copy Database dialog box. This will bypass the corrupt ACL and create a default ACL that you can then modify as necessary.
2. Replace the design of a mail database with a non-mail template and then do a replace back to the mail template, which has been known to correct corrupted ACLs.
3. From the Administration client > Files tab, select a healthy ACL database where the ACL is similar to the one that needs to be replaced. Right-click and select ACL.Copy. Select the bad ACL database then right-click and select ACL.Paste. This
is an easy way to reset the ACL.
U may try to download and repair to link
http://www.nsf.repair/
If all are failed, then go to ur Lotus dir and search for data directory and take full backup of archieve directory.
Or other source of solution your trouble can be at:- http://www.filerepairforum.com/forum/other/other-aa/lotus-notes/247-lotus-notes-8-5
Hope this may help u!

Lotus Notes password change not working

Hi,
I'm integrating Lotus Notus and currently we are able to create users in the Domino server, so we have many doubts:
Lotus Notes Id Files are created in the Domino server, but this Id Files needs to be copied in the users own laptops or desktop pc's. What is the best way we can give the user the Id File?
For password changes: I have test password change from OIM self-service, I mean, I create a user, then I provision the user account to Lotus and finally I login with the user account to OIM user self-service interface and try to change password, connector log says everything is ok and the user Id file is correctly modified but, in Domino's server, Lotus internet/http password is not modified, so it is correct? I expect the http/internet password to be changed too. For test purposes I have to copy the new Id file from the Domino server and paste it in the client pc where Lotus Notes client is installed, I put the new password and I'm able to login, but http/internet password is not changed.
So I don't know if this is a limitation from the connector or if I miss something in order to be able to perform password changes, I have read many times connector documentation but this is not clear for me. I also have read oracle waveset Domino connector documentations but seems to work in a different way OIM do.
Please help me
Regards.

Hi SaikatDas,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation
Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue, it is related to the IIS, so I’m afraid that it is not the correct forum for this issue. therefore, I suggest you can post this issue directly to the IIS forum:http://forums.iis.net/
, maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lotus Notes Portlet

I have been having similar problems as forum messages # 520072 &
524480 (ref. below). my only difference is that in the apache
error log I get the following:
java.net.MalformedURLException: unknown protocol: https
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.net.MalformedURLException.<init>(Compiled Code)
at java.net.URL.<init>(Compiled Code)
at java.net.URL.<init>(Compiled Code)
at
sun.net.www.protocol.http.HttpURLConnection.followRedirect
(Compiled Code)
at
sun.net.www.protocol.http.HttpURLConnection.getInputStream
(Compiled Code)
at java.net.URL.openStream(Compiled Code)
at lotus.domino.NotesFactory.getIOR(Compiled Code)
at lotus.domino.NotesFactory.createSession(Compiled Code)
at
oracle.lotus.application.ApplicationLogin.authenticateUser
(Compiled Code)
at oracle.lotus.application.ApplicationLogin.performLogin
(Compiled Code)
at oracle.lotus.application.LotusProvider.process
(Compiled Code)
at oracle.lotus.application.ExternalServlet.doGet
(Compiled Code)
at oracle.lotus.application.ExternalServlet.doPost
(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at org.apache.jserv.JServConnection.processRequest
(Compiled Code)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
Our Lotus notes web sever is running HTTPS (on a Sun Box) and
the portal (v3.0.9x) is running on Sun Solaris 8. And like the
others, I have followed the Oracle doc on creating a Lotus
Portlet to the letter. But, I'm at a lost since I can not find
a resolve for the error or what it really means. I've searched
MetaLink and Technet and even put in a TAR (which Oracle said
they do not support their own demo portlets - thanks a lot :^
( ) Any insight to this problem would be great.
thanks,
kurt
reference msgs:
**part of msg #524480
I am trying to install these portlets from the PDK and am having
problems. Looked through all other threads relating to these
portlets and have not found a the answer to my problem.
I have followed instructions to the letter and can access
mailbox in browser by using http://
[lotus_host]/mail/mailbox.nsf.
Having set up the External Application as instructed, when I
attempt to logon to the application, I am presented with a page
headed Lotus with the five input fields from the previous form,
Username, Password, MailFilename, MailServer, Hostname. When I
complete these fields nothing seems to happen.
part of msg #520072
Using the downloaded Java PDK framework and the Lotus Notes zip
file, I have successfully configured and tested the 'sample'web
provider.
I then configured the apache configuration files
jserv.properties and zone.properties for Lotus Notes (as
described in the Lotus Notes Portlets help file.
All went well until I got to Registering the Provider with
Oracle
9iAS Portal :
I got as far as the Input form for the Lotus Notes Inbox (i.e.
clicking on the hyperlink for the external application).
This form asks for Username, Password,Mailfilename, Mailserver
and Hostname.
The form is headed 'LOTUS', the only other item on the Form
being the 'Submit' button.
When I submit the form the entries are cleared (returning an
empty input form as before) but nothing happens.

If you check out the thread from my question (524480), we found
that we had to enable the IIOP task on the domino server as we
were not running it, this cured the problem I think you are
encountering.
This has not solved all our problems as I only see Notes data in
the Inbox Portlet Preview mode, this problem is refered by other
contributors as the collapsing Portlet problem (496625) and I do
not know whether there is a solution to this problem yet.
Hope this helps.

How to Convert Outlook to Lotus Notes ?

I'm looking for the way to convert my Outlook email archive (.pst) to Lotus Notes mail file (.nsf). I found that there is some commercial 3rd party tool doing this job which is too expensive for me. Is there any good and manual way to
convert .pst to .nsf or to move my mail data from Outlook to Lotus Notes ?

Hi andy
Here is a free utility to convert Outlook to Lotus Notes known as Nupgrade.exe. With the help of this tool you will easily transfer Outlook data to Lotus Notes. With this tool you will need to remember few things like:
• The Upgrade Wizard is not installed with the Notes client, by default. To obtain the Upgrade Wizard, perform a custom install of the Notes client and select to install the Migration Tools components.
• Confirm that Microsoft Outlook is configured on the workstation as "Corporate or Workgroup" instead of "Internet Mail Only"
• Confirm that Microsoft Outlook is configured as the default mail application on the workstation.
Verify which Outlook .pst files are linked to a profile on that workstation.
After that with the help of few easy steps you will easily convert Outlook PST to Lotus Notes:
1. Open a Command Prompt window by selecting Start --> Run and then type in:
cmd.exe
2. Change to the Notes client program directory. For example:
cd program files\lotus\notes
3. Enter the following command to launch the Upgrade Wizard:
Nupgrade.exe 3
4. Click "Next" to continue past the Welcome Screen.
5. Select your profile that is linked to the .PST and .PAB files to be migrated and then click "Next" to continue.
6. Specify the type of Upgrade Method to be performed, either "Express" or "Custom", and then click "Next" to continue.
Note: If you select "Custom", on the following screen, you can specify which items that you want to convert to Notes. However, if you select "Express" (the default upgrade method), all .PST files and .PAB files linked to the selected profile will be converted
to Notes.
7. Click "Next" to accept the defaults for Personal Folder Conversion Options. By default, the Upgrade Wizard will convert the contents of .PST files into a Notes database based on the default mail template (e.g., Mail6.ntf). The Notes database created by the
upgrade wizard is created in a Mail folder below the Notes client data directory.
8. Select "Finish" to begin the conversion process when you reach the begin upgrade screen. Once the Upgrade Wizard begins the conversion process, you will need to supply the password for the Notes User ID.
But if your MS Outlook account is connected is “Internet Mail Only” then you will need to use a third party tool like
Outlook to Notes Converter which easily convert Outlook data to Lotus Notes file format. Because a right third party tool is always guarantee for secure data conversion process. Read more:
http://www.en.psttonsf.org

Could not load file or assembly CrystalDecisions.ReportAppServer.Controller

Hello
I am getting this error in Visual Studio 2010 on Windows 7 64 bit.
Could not load file or assembly 'CrystalDecisions.ReportAppServer.Controllers, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692....1304' or one of its dependencies. The system cannot find the file specified.
I installed CR redistributable on the workstation and verified that the file does in fact exist and is the correct version.
Please help.

Hi Ludek, thanks for your reply. Sorry if I'm confusing you, but I'm a bit confused myself
Here is what I hope is a better explanation.
The way it works is that we have a web application in IIS on Windows Server 2008 64-bit. What we do is copy the templates (ASPX files) and bin (DLL) files to the Windows Server's IIS via Team Foundation. The files are accessed with a web browser. We don't compile/debug because previously, our CMS's code behinds were mixed C# and VB and the application would not compile. However, the files can still be accessed via a web browser and the dynamic website worked fine. "Debugging" was done via trial and error on a testing server.
Now, we have upgraded the CMS so all the code behinds are C# and the site should compile. One of our web apps (that doesn't use Crystal Reports) has compiled successfully and I am currently doing the second one. I am trying to compile the whole application for the first time on my workstation, but the Crystal Reports DLLs are causing errors. I used the 64-bit re-distributable Crystal Reports for Visual Studio version 13_0_1 because I wanted to make sure I had the same version as our Web servers.
We do not run the web app from the IDE (have never been able to), except for now when I am trying to build/compile on my workstation via Visual Studio. In production it is accessed on the web server via web browsers only.
I hope this makes more sense as to what I am trying to do. Thanks for the link but I am afraid if I install 13_0_2 I will start getting version conflicts.as the server has 13_0_1 64-bit.
Thanks for your help so far and I hope this helps!

Migration from Lotus Note / Domino to Microsoft office 365

Core functionality has been agreed to be tested which include:
- Provisioning of user account (create, delete, amend)
- Authentication
- Data Migration and
- Usability.
The Background of the project is the migration of data from Lotus note/Domino to Microsoft Office 365.
A: How would we go about testing the product?
B: What are the main features to look out for in order to achieve test coverage in this type of project?

For migrating Lotus Notes (NSF files) & Domino Server Mailboxes in Office 365 accounts use only a Good-Quality Lotus Notes to Office 365 migration application. The product executes Bulk migrations with high-speed and data security. Perform migration
of emails, contacts (mailing lists), calendars and task (to-do lists) completely into Office 365.
Get Product Overview at:
http://www.export-notes.com/lotus-domino-to-office365.html
(Facility to Migrate Lotus Notes as well as Domino Server Mailboxes)

Lotus Notes to Mbox converter, Lotus Notes to Mbox converter

Anyone have an idea how to convert Lotus Notes email files (.NSF) to a MBox format? I have 25 GB of email that I need to convert over

Migration from Lotus Notes to MS Outlook email environment is a complex process. It entails migration of user mailboxes from IBM Domino Server to MS Exchange Server. RecoveryFix for Lotus Notes to Outlook successfully
exports emails from NSF file to PST file of MS Outlook. With this email migration tool, you can export emails, attached files, contacts, journals, appointments and tasks from IBM Domino Server to PST files of MS Exchange Server. It also allows the use to save
the Lotus Notes user mailboxes in EDB files of MS Exchange Server.
Thanks

Created with PDF Maker files from Lotus Notes appears warning to Flash Player disable?

Lotus Notes 8.5.3 FPX
Windows 7 64 bit,
Acrobat 11.0.6 XI.Pro
When files are generated from the PDF Maker PDF from Lotus Notes, then a warning is displayed to Flash Player. How can I disable this warning?
Is there an option in the Adobe Customization Wizard XI?
Flash Player has been updated.
Thanks for the help

Good morning, I have Adobe Flash Player aktualisert-> problem is solved. Is there no way to check to disable permanently?

Migration Lotus Notes to Exchange, how to migrate confidential emails (in LN encrypted)

Hi,
we're investigating a migration of Lotus Notes to Exchange. One issue is the migration of encrypted mail. How to keep them confidential in Exchange?
We have users like a secretary that has read/write access to a mailbox of a manager. If another user mails the manager with confidential information, he encrypts it in LN before sending it, so only the mailbox owner can open the message. Is this possible
in Exchange 2013 and in Exchange online? Heard that you can set things via IRM, but that with Outlook web access the secretary can set the manager's mailbox as primary and than will be able to open the confidential email....
best regards,
Hans

Hello,
I would also like to suggest here a very proficient software for NSF to PST Conversion, which can be downloaded as a free trail from here http://www.howconvertnsftopst.convertnsftopst.biz/ . It is very simple and affordable third party software that can
instantly convert Lotus Notes data to Outlook or exchange files without facing any error. For nay other query visit http://www.notestooutlook.net/

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra

Encryption bit of Lotus Notes ID files

Similar Messages

Maybe you are looking for