Encryption software for WD MyPassport Wireless, please give feedback

I just started using this and it's very easy to set up. But I had to change the path in all your sh sript files to ENCFS=/home/root/wdcrypt/encfs from ENCFS=/home/root/encfs/encfs. I could have renamed wdcrypt folder to encfs, but I don't know whether that will affect anything else. Thanks for your contribution.

I created some software for storing encrypted files on the hard drive, please test it and tell me what you think! But do NOT use it to store anything valuable until you have at least tested it for a while and read some feedback from other users! https://github.com/maglar0/wdcrypt Read everything on there and try the demo of the web GUI (at https://maglar0.github.io/wdcrypt/?demomode=1 ), then grab the installation file located under "releases" on the github page.

Similar Messages

  • My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......

    My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......
    And my Airplort utility does't catch any other wireless devices please provide help....

    fubar

  • 10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

    HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

    I suggest you try the very clean and very forceful AutoLoader method:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT6114 i wantthis for my loptop macbook please give me a chance to download for free

    please give me free download of OS XMAVERICKS for my macbook loptop

    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • Encryption software for Mac book

    I need to send a few Word Documents via email and I was told to encrypt them.  Can anyone recommend an encryption software that can do this?

    When you ZIP a file and password protect it, the archiver encrypts the files. On the receiving end, they'll be prompted for the password. The password acts as the decryption key.
    In Terminal, you can use zip to fulfill the requirements. Here's an example:
    Gaia:~ trane$ zip -9 -e myfile.zip myfile myfile1
    Enter password:
    Verify password:
      adding: myfile (stored 0%)
      adding: myfile1 (stored 0%)
    In this example, the zip utility is set to maximum compression (-9) and encryption (-e) to create the zip archive called myfile.zip, adding two files (myfile and myfile1) to the archive. It asks for the encryption password twice and then creates the archive.
    As a note about security, it's a good idea to send the password for the archive in a separate e-mail; otherwise, encrypting the files has no meaning at all.

  • Hotel management software for mac - need assistance PLEASE read..

    hello everyone! thanks for taking the time to read this. I am managing hotels and they requested going via computer compared to hands-on. what programs do you recommend for the hotel management software when one does a reservation online to send a notice and when guests check-in?
    also, does anyone recommend a good GDS type program to have customers do online reservations via my website and to help advertise it? thank you again!
    p.s. this is for MAC only - not PC. thank you..

    For any online activity, personally I would have a customized application written in something like PHP (for scalability instead of being fixed and needed eventual upgrades as in ASP or dotNet).
    Perhaps you can search at cnet for a review. I do not know of any specific software for hotel/rest management for Mac, but I'm sure there are commercial programs of some sort that could be repurposed.

  • Please give feedback on some searches (and the search experience generally).

    Please read
    this post on my blog and give feedback on your search experience.

    Not bad for a beginner.
    You might want to consider working on your image optimization
    - the projects
    page is >300K in weight, and it should be no more than
    100K. You should
    also NOT name your files/folders with names containing spaces
    (or any other
    punctuation, other than hyphen and underscore).
    You might also consider these validation results -
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.tallis-surveyors.co.uk%2FProj ects.html
    Pages with invalid code/usages lead to pages that render
    unreliably in
    various browsers.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "datsomset" <[email protected]> wrote in
    message
    news:fr5tlh$r7e$[email protected]..
    > Could anyone please give me some feedback on this site
    (below)? I am not a
    > web
    > builder, just a business person having fun building a
    site for my
    > business. I
    > know I need to reduce the size of the images, can you
    suggest any other
    > improvements?
    >
    > I would also like to build an email template using the
    same css layout. I
    > tried this, but the css design did not show up in the
    inbox of the pc I
    > sent it
    > too. Do I need to do an inline css?
    >
    > Thanks in advance for your help, I always find great and
    friendly
    > assistance
    > on this forum :)
    >
    >
    http://www.tallis-surveyors.co.uk
    >

  • No WPA2 encryption option for Intel 2200BG wireless on T42 w XP SP3

    Hi, trying to upgrade my wireless network to WPA2 so i can use the higher 802.11n speeds for my new T500 so I want to upgrade my T42 now on WPA to WPA2. (Yes I realize my T42 needs to be turned off from the wireless network before I can get the higher speed for my T500 but I still want to have both machines set up for WPA2 so I don't need to change any options in Acess Connections before using the T500 on wireless.)
    On my T42 I have upgraded to the latest Intel PRO/Wireless driver 12.01.1000 dated Jan 5 2009. I have latest Access Connection 5.12. When trying to install Microsoft patch KB893357 it responds that it is no longer needed on latest release (I am on XP SP3.)
    Setting my DIR-655 Dlink router to WPA2 only I can access it with my T500  with encryption set in Access Connection to WPA and AES. I can't access the network from my T42 with these settings. (Dropping the router down to WPA and setting encryption on the T42 to WPA and TKIP works.)
    What can I do to achieve WPA2 encryption on my T42?
    Message Edited by zilla on 2009-02-08 08:40 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

    Googling on WPA2 and SP3 there seems to be quite a few people who lost their WPA2 ability as they installed SP3 on XP. Did anybody here find a solution for their WPA2 SP3 problems?
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Need an encryption software for MAC n XP

    does anyone know a good encryption USB software that will work on both MAC and XP?

    You might look into TrueCrypt. I've not used it myself, but comments I've seen on the Web have been favorable.

  • My ipod won't connect. I get an Apple Snyc error on pc startup. I think it's because I failed to install some software for my iphone properly, please help!

    See subject title above pls

    This is an Apple support document, it may help.
    http://support.apple.com/kb/TS3694
    Relevant section
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • Any recommendations for encryption software for iPhone?

    Hi,
    I want to store some work data on my new iPhone. A mixture of file types - documents, pictures, Powerpoint, applications.
    I also want to keep some of my home information - such as documents, pictures, apps.
    Where can I put them on the iPhone, and can I encrypt them in a few folders to keep the data secure?
    Thanks
    Pete

    Actually there are a few apps that do just that. I personally use MobileFinder, but there is also datacase and others I can't remember.
    However these are not password protected they simply allow you to transfer documents onto the iphone and view them. MobileFinder has limited text editing facilities.
    Theres an application called PicVault which allows the encrypted storage of pictures, using a password.

  • SP01: More than 200 downloads of SP01 - great! Please give feedback here:

    Hello,
    2005A SP01 PL02 has been downloaded by more than 200 different SAP Business One partners. That's great and proves the high demand for allowing early hands-on across the partner community!
    However, feedback is rare. Usually this means that no major issues occured and that the information given (e.g. in the documentation of DB and UI changes + potential compatibility issues) is OK as well.
    That would be great!
    Could you confirm - or reject that interpretation?
    Thanks in advance,
    Frank

    I have been studying SBO 2005 A SP1 for a while. I have come to terms with the License Server issue.
    However, I now have a new problem.
    All the add-ons (for different databases) cannot start anymore.
    When I tried Outlook Integration, I will a series of error messages, including
    1. Resource error (no title)
    2. Initialization failed (no title)
    I am given a choice to
    a. Restart Add-on
    b. Log off the company
    c. Continue without the Add-on
    I chose the last option and I get a dialog box that says
    BO_Outlook.exe - Application Error (Title)
    The instruction at "0x016cf850" referenced memory at "0x02de2f48". The memory could not be "read".
    Click on OK to terminate the program.
    When I tried XL Reporter, the error messages are slightly diferent.
    1. Unable to connect to DI. Resource Error (title = XL Reporter)
    I was given the System Message with the 3 options. I chose 3. No further messages.
    Any advice? These add-on modules were working fine.

  • Please give me the Vietnam's localization for implementation SAP (FI-CO)

    Hi experts,
               I am going to implement SAP (FI-CO) project into Vietnam company but I cannot find the Vietnam's localization or the information that is important for my implementation.
    Please give the information which is helpfull for me.

    Hello,
    If you want to localize SAP in Vietnamese, please let me know.
    We are a leading independent software vendor providing Next Generation Language Technology Solutions. LinguaNext provides consistent, flexible, and expedient Enterprise-scale solutions for language localization of the entire diverse set of applications that typically exist in todayu2019s Enterprise IT environments.
    The LinguaNext SPeeDu2122 Suite is a technology and a deployment methodology that delivers multi-lingual capabilities to Any application regardless of its platform or architecture, and without any access to its source-code. SPeeDu2122 Localization does not require any changes to the application source-code and it does not affect users who do not need localization.
    Br, Manish

  • Need 256 Bit AES Full Disk Encryption for a Mac.  The other discussions regarding this issue are very old.  Does anyone have any current advice regarding encryption software?

    Does anyone have any advice regarding 256 bit full disk encryption software for Macs?  The other discussions on the topic are years old, so I would like some current input.  Thanks for your help in advance.

    Depending on your Mac, you might not want to upgrade to OS X 10.7 or 10.8 as it will not run the PowerPC based software your currently using costing a bundle to replace it all, also they will slow down your machine if it's not a more recent issue. You don't want to upgrade OS X without AppleCare defending your possibly bricked logicboard that's for sure.
    Filevault encrypts the boot drive, however in doing so makes it near impossible to fix if you have a software issue and need to recover files directly or by using specialty software. Also it robs the machine of performance even more than the Lions do. So you will really need a SSD to work best with 10.7/10.8 and Filevault, then it has to be freshly installed. Filevault needs 50% free space on the boot drive, then it's going to write to the slower 50% half of the hard drive where performance is terrible compared to the first 50%.
    Also Filevault is cracked under certain conditions, and if someone gets their hands on the machine (like the law) and knows what they are doing.
    If you take your Filevaulted machine to Apple to fix, they are going to require the password to fix the machine obviously.
    Software based encryption is vulnerable, you might want to instead place your sensitive data on external self-encrypting hardware that doesn't rely upon software or computer hacks/bypasses (ike freezing the RAM) to get to it.
    http://www.datalocker.com/products/datalocker-dl3.html
    Iron Keys for portable USB self encryption, both work with any computer, so your not locked into one platform.
    With the senstive data off the computer and on a external device, there is the option of removing, hiding and securing the device. If used with a computer that's never connected to the Internet, it's safe from snoopers, except from a survelliance van parked outside your door.

  • Updating Device Software For Torch 9800

    Every time I try to update my device software it backs up Ok and the gives me the following message:
    An error has occurred while downloading software for your device. Please verify your Internet connection or try again later, if the problem persists.
    I have an internet connection through my desktop. Does it need to connect through my Blackberry device or does my desktop connection suffice.
    I would appreciate anyones help with this.

    Hey col253col253,
    Welcome to the BlackBerry Support Community Forums.
    Have you tried performing the update through www.blackberry.com/update?
    If not, I would suggest trying.  
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

Maybe you are looking for