Encryptor for Cisco SX20

Hi,
May i seek your support regarding external box KV 19 encryptor if it is compatible with SX20 of later firmware. Also, if the said encryptor can provide functional interoperability with Cisco IP Phone of any model.
Please see below link for details:
https://www.sypriselectronics.com/information-security/secure-communications/kiv-19m/
Thanks,
Acevirgil

A KIV 19 appears to be just an encryption device. Provided your network has routes to whom you intend on calling, a SX20 or any codec would be able to make a call. The SX20 is unaware of the KIV 19 and the KIV 19 is unaware of the SX20. I would potentially back off the MTU on your codec seeing how your networking traffic passing through the KIV 19 would have a larger then normal 1500 transfer unit. I hope that helps.

Similar Messages

Xhistory calllog from Cisco SX20 codec

Hello All,
Someone can help me? I have a Cisco SX20 with the software version TC7.2.1, I´d like know, If has limitation to extract call logs from SX20 using the command line:
xhistory calllog call
I need extract the last 30 days, always, one time the month.
Tks,
Cesar

You may have been able to see some logs, but it wasn't a complete list of all the calls made (unless you really didn't use the unit much at all).
With TC7.2.1, you can grab the call history via the web interface in a much more readable format (Diagnostics, Call History) - but having a look at that, it only shows the last 100 calls (which for the unit I looked at is only a few days worth, not the "last 30 days" you're after).
You really need TMS to capture and record the CDRs to be able to report for any significant time frame. You can download TMS and run it as a demo version to report on up to 3 devices without any licencing.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Cisco SX20 extension cables

Recently I've installed a Cisco SX20 for a customer. The codec was placed a few meters away from the camera itselfs and so it whas necessary to extended the cable between the codec and the camera by use the Cisco splitter with product code CAB-PHD4XS2-SPLIT. See the left picture below.
The HDMi cable can be extended with a normal HDMi cable but the ethernet cable is not standard. Instead of a straight UTP cable a specially engineered cable is needed (still RJ45 on both sides but with a special PIN layout).
QUESTION: does anyone know what the Cisco product code is for this special UTP cable? Does Cisco have them at all or do I need to create it manually everytime?

Did you get an answer to this? I am installed an SX20 and for the first time require to use the Y splitter cable. I have Video but it states there is no camera control.
WARNING: Camera Detection
No cameras found.
Make sure that the control cable between the camera and the system is connected.

Cisco SX20 SIP Registration Failed

Hi,
I would like to share the issue we encountered on a Cisco SX20 endpoint that is failing to register on a VCS Control using SIP.
The endpoint is running TCNC6.2.0 version. The other endpoints running on TC5x.x, TC6.x.x, TC7.x.x has no issue.
The endpoint can register on the VCS but when we try to call one of the other endpoints, the call is not successful. The endpoint will ring and when we accept the call, there's no audio and video then call disconnects. After call disconnection, the endpoint failed to register on the VCS.
We tried to re-register again, restart the system then tried to do another call. Same issue encountered again.
On the VCS, we tried to create a subzone for that specific endpoint (subnet) with treat as authenticated policy. Problem still encountered.
We also tried to restore the codec to factory default settings but didn't resolve the issue.
Seeking for your advise.
Thank for help in advance.
Thanks & best regards,
Acevirgil

Since you are using the TCNC version of code, any encryption will not work for calls, so are you forcing encryption anywhere on the VCS or seeing the call try as TLS in the call history?

Contacts search for cisco Jabber for Windows & MAC

Hello,
Please assist on given below query !!
System Deatails of CUCM & IM Presence Server
CUCM:
1> System version: 9.1.1.20000-5
2> VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with IM & Presence
IM & Presence:
1> System version: 9.1.1.20000-5
2> VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with CUCM
Requirement:
1> User Search base for Cisco Jabber for Windows & MAC Client
2> Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
Every reply would highly Appreciated!!

Hi Karthik,
Thanks for your reply!
I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
1> The contacts does not appear when I perform a search
2> Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
3> Please also provide If any specific system requirement for LDAP server.
4> Is it possible without LDAP integration?
It is really urgent and every post would highly appreciate..........

No variable audio output for Cisco CHS 435HDC set top box.

Background: Until the other day I had my stb connectected to a TV, using TV sound, with an HDMI cable. The P265v2 remote volume control changed the TV volume. No problems.
My new TV & home theater system was recently installed. We don't use the TV speakers. While my first preference was to program the Verizon remote to change the volume on my Onkyo receiver, this did not appear to be an option on the remote's programming instruction page on the Verizon website. Instead, I am directed to change a setting on the remote that makes the Verizon remote change the stb output volume vs the tv volume. I changed the setting on the remote and ensured the stb box was set up for "variabe" audio output.
Problem: Using the stb variable audio settings, volume settings 1 through 30 produce the same volume. (Volume setting 0 produces no volume, as one would hope.) It appears the "variable" setting isn't producing a variable output as it should be on this unit.
Thinking that maybe the receiver was complicating the sitation, I tried connecting the stb to the old TV and the new TV directly and had the same results.
Now, while I am watching TV, I need to have the receiver remote at hand in addition to the Verizon remote. It would be nice to have the volume be adjustable as it should be while using the Verizon remote. I don't like the idea of using a seperate universal remote because then I would lose some of the functionality that the Verizon remote provides when watching TV, using the DVR, watching on demand, etc.
I would like to know if this is a problem just with my unit, or if it exists with all of these units, which would hopefully be fixed with a Cisco/Verizon firmware update soon, hopefully.
Thank you.

soups230 wrote:
Having same issues with hdmi and optical. Any fix to this.
Hello,
In order to control the volume on your home theater system, you'll need a FiOS TV Universal Remote that has the 4-buttons on the top for 'DVD', 'Aux'iliary, 'TV' and 'STB'. The audio receiver would have to be programmed into the FIOS TV Remote, and controlled using the 'Aux'iliary button.
Verizon's 4-Button Universal Remote Controls are available for purchase:
a) online via www.verizon.com/fiosaccessories
OR
b) at a local FiOS TV store (call first to check if they have them in stock). For a list of stores: http://www22.verizon.com/support/residential/tv/fiostv/general+support/account+issues/questionsone/8...
Presently, the default remotes for new set top boxes are the 2-button P-265 (newer version) remotes.
Regarding a problem with HDMI/optical on Cisco 435 STBs, check out the following:
Go to this webpage: http://www22.verizon.com/Support/Residential/TV/FiOSTV/Receivers/Equipment+Issues/QuestionsOne/12839...
Click on the link for 'Cisco CHS 435 HD DVR User Guide'.
Open the PDF and go to page 22 for 'Connecting to a Home Theater System...'.
Hope this helps!

What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

Hello All,
UCCX version 8.0.2.11005-20
UCCX is running in HA mode.
Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
Any thoughts would be much appreciated!
Thanks in Advance,
Matt

Has your problem cleared up? Did you do anything, such as a reboot or open a TAC case?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Rrack mounting brackets for Cisco switch SF300-48P ?

Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

You might be able to get them through Cisco support. Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

RAID Configurations for Cisco servers

Hi All,
What is the RAID configuration for Cisco Appliance(Version 8.5) like CUCM, CUPS, CUIC, Unity etc?RAID Configuration will be done while installtion itself or we need to do it explicitly?
Regards,
Adithya

Hi Geoff,
Thanks for the reply. Just wanted to know whether if this RAID configuartion is similar to the other server RAID where we install Cisco applications.(Like OS & Application Software is RAID 1 and Database is RAID10).
Regards,
Adithya

Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.

Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
Samir

Hi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir

Has anyone develped an EM plug-in for Cisco switches or routers

Folks,
Has anyone develped an EM plug-in for Cisco switches or routers? Please reply to this thread if you have developed one and would like to share your experience in developing this plug-in?
Thanks,

It's probably not the conversion from CMYK to RGB that's causing the problem, but color profile (ICC) embedding in Photoshop. Fireworks doesn't read color profiles. You might be able to create an action to remove the color profile in Photoshop and then batch process the images with it.

RTP for Cisco IP Phones

Hello friends!
I'm developing an application for Cisco IP Phones that whorks with JMF. Since there are some programmers in this forum that knows Cisco IP phones, I send my question here.
I was send succefully the XML message to phone (CiscoIPPhoneExecute), I was customized the paket's size to 160, etc. All works aparently. But audio stream does not reach to phone. Can anyone tell me why??
Below I write my source code.
Tanks!
Max.
import java.io.*;
import java.net.*;
import java.util.*;
import org.apache.xerces.impl.dv.util.Base64;
import javax.media.*;
import javax.media.control.*;
import javax.media.format.*;
import javax.media.protocol.*;
* @author Administrator
public class MMHTTPPost {
    /** Creates a new instance of MMHTTPPost */
    public MMHTTPPost() {
        try {
             * Envia el CiscoIPPhoneExecute al telefono
            String xml = new String("<CiscoIPPhoneExecute>"+
                                        "<ExecuteItem Priority=\"0\" URL=\"RTPRx:Stop\"/>"+"<ExecuteItem Priority=\"1\" URL=\"RTPRx:10.1.15.10:23480\"/>"+
                                        "</CiscoIPPhoneExecute>");
            String userId      = "Max",
                    password    = "12345",
                    basicAuth   = "Basic ",
                    params      = "XML=" + URLEncoder.encode(xml, "ISO-8859-1" );
            byte[] bytes       = params.getBytes();
            // Create a URL pointing to the servlet or CGI script and open an HttpURLConnection on that URL
            URL url = new URL( "http://10.1.15.56/CGI/Execute" );
            HttpURLConnection con = ( HttpURLConnection ) url.openConnection();
            // Indicate that you will be doing input and output, that the method is POST, and that the content
            // length is the length of the byte array
            con.setDoOutput( true );
            con.setDoInput( true );
            con.setRequestMethod( "POST" );
            con.setRequestProperty( "Content-length", String.valueOf( bytes.length ) );
            // Create the Basic Auth Header
            Base64 encoder = new Base64();
            basicAuth = (String)encoder.encode( ((String)(userId + ":" + password)).getBytes() );
            System.out.println("Codificado: " + basicAuth);
            con.setRequestProperty( "Authorization", "Basic " + basicAuth.trim() );
            // Write the parameters to the URL output stream
            OutputStream output = con.getOutputStream();
            output.write( bytes );
            output.flush();
            // Read the response
            BufferedReader input = new BufferedReader( new InputStreamReader( con.getInputStream() ) );
            while ( true ) {
                String line = input.readLine();
                if ( line == null )
                    break;
                System.out.println( line );
            input.close();
            output.close();
            con.disconnect();
             * Aca empieza la parte RTP/JMF
            // Create a Processor for the selected file. Exit if the
            // Processor cannot be created.
            Processor processor = null;
            try {
                String mediaUrl = "file:\\C:\\pruebas execute\\spacemusic.au";
                processor = Manager.createProcessor( new MediaLocator(mediaUrl));
            } catch (IOException e){
                System.out.println("Exception occured (1a): " + e);
            } catch (NoProcessorException e){
                System.out.println("Exception occured (1b): " + e);
            // configure the processor
            //processor.configure();
            //Espera el estado Processor.Configured
            boolean result = waitForState(processor, Processor.Configured);
            if (result == false)
                System.out.println("No se pudo configurar el procesador...");
            // Block until the Processor has been configured
            TrackControl track[] = processor.getTrackControls();
            boolean encodingOk = false;
            // Go through the tracks and try to program one of them to
            // output ulaw data.
            for (int i = 0; i < track.length; i++)
                if (!encodingOk && track[i] instanceof FormatControl)
                    if (((FormatControl)track).setFormat( new AudioFormat(AudioFormat.ULAW_RTP,8000,8,1)) == null)
track[i].setEnabled(false);
else
encodingOk = true;
else
// we could not set this track to ulaw, so disable it
track[i].setEnabled(false);
*Aqu? se cambia el tama?o del paquete a 160
if (((TrackControl)track[i]).isEnabled()) {
try {
System.out.println("Cambiando la lista de codecs...");
Codec codec[] = new Codec[3];
codec[0] = new com.ibm.media.codec.audio.rc.RCModule();
codec[1] = new com.ibm.media.codec.audio.ulaw.JavaEncoder();
//codec[2] = new com.ibm.media.codec.audio.ulaw.Packetizer();
codec[2] = new com.sun.media.codec.audio.ulaw.Packetizer();
((com.sun.media.codec.audio.ulaw.Packetizer)codec[2]).setPacketSize(160);
((TrackControl)track[i]).setCodecChain(codec);
catch (Exception e){
System.out.println("Error al cambiar el tamano del paquete: " + e);
System.out.println("Encoding ok?: " + encodingOk );
// At this point, we have determined where we can send out
// ulaw data or not.
// realize the processor
if (encodingOk)
//processor.realize();
// block until realized.
// get the output datasource of the processor and exit
// if we fail
//Espera el estado Processor.Realized
result = waitForState(processor, Processor.Realized);
if (result == false)
System.out.println("No se pudo realizar el procesador...");
DataSource ds = null;
try
ds = processor.getDataOutput();
catch (NotRealizedError e)
System.out.println("Exception occured(2): "+e);
// hand this datasource to manager for creating an RTP
// datasink.
// our RTP datasink will multicast the audio
try
String mediaUrl= "rtp://10.1.15.56:23480/audio/1";
MediaLocator m = new MediaLocator(mediaUrl);
DataSink d = Manager.createDataSink(ds, m);
d.open();
d.start();
catch (Exception e)
System.out.println("Exception occured(3): "+e);
catch ( MalformedURLException murlex )
System.out.println( murlex );
catch ( IOException ioex )
System.out.println( ioex );
* @param args the command line arguments
public static void main(String[] args) {
new MMHTTPPost();
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realize, the processor will be closed
     if (ce instanceof ControllerClosedEvent)
          setFailed();
     // All controller events, send a notification
     // to the waiting thread in waitForState method.
     if (ce instanceof ControllerEvent) {
          synchronized (getStateLock()) {
          getStateLock().notifyAll();

ignore my last post.. I didn't properly read the source code.
Anyway, I got g.711 streaming to work. I started out using the AVTransmit2 sample, but set the audio output format to what is used in the source code posted here. I've also applied the same codec chain described above, and that was it.
I could never get streaming to work using the first RTP streaming method described in the JMF Programmers guide (and this is the method used in the source posted above), but using the RTPManager, things work just fine.

Enquiry on RMA for Cisco Products

Hi,
Recently i ran into some issue when processing a RMA for Cisco 3925 router.
I've RMAed the chassis but the i got the part, it didnt have a system board.
When i contacted Cisco, they mentioned that the system board can/must be RMAed separately.
Is there any documentation or list for Cisco Products that has system board as a FRU?
Thanks

Recently i ran into some issue when processing a RMA for Cisco 3925 router.I've RMAed the chassis but the i got the part, it didnt have a system board.
Before the replacment part/unit is shipped, you always get a shipping document in an email. This document will list down what item(s) are being shipped.
Did you get this?

Reporting & Audit Compliance Solutions for Cisco Secure ACS

The Cisco Secure ACS Access Control Server is probably the worlds best selling remote access security solutions and its quite likely that you're already using it! Wouldn't it be great to know exactly what it was doing? Further still, when you have to provide audit documentation regarding your policies and how effective they are, how long does this take and what valuable data remains locked inside the ACS database and logs?
extraxi offer a range of products that deliver a complete solution for harvesting, managing and analyzing your ACS/SBR log data to meet the increasing demands for regulatory compliance (SOX, COBIT) and overall enterprise monitoring and security.
We are proud to supply customers including Intel, Ford, Lego, T-Mobile, US Dept of State, US Army, British Telecom, First Energy, TNT Express, Kodak and JP Morgan and many more so why not take a look at our industry leading solutions and evaluate the benefits for your organization...
Featured Products:
* aaa-reports! enterprise edition - Automated Reporting
The best reporting system for Cisco Secure ACS and Funk SBR just got a whole lot better! Improved reports, enhanced filtering and query builder and now with up to 48GB internal storage based on SQL Server technology makes this the ideal solution for large or complex AAA deployments and those that need the additional functionality from the standard aaa-reports! tool.
With aaa-reports! enterprise you have a complete application for reporting including many canned reports (each with flexible filtering options) and a point-n-click query builder for designing custom reports.
For historic trending, forensics and audit compliance there simply is no better reporting application for Cisco Secure ACS or Funk/Juniper SBR.
* csvsync - Automated ACS Database & Log File Collection
csvsync allows you to download CSV log data (RADIUS, TACACS+, Passed/Failed Attempts etc) directly from any number of Cisco Secure ACS servers (Windows & Appliance) via http(s). Version 3.0 now supports the collection of ACS database itself for import into aaa-reports and detailed reporting based on the ACS security policies. Simple, secure and efficient, csvsync is the best solution for harvesting log data from your Cisco Secure ACS servers.
Download fully working 60 day trial versions at http://www.extraxi.com/rq.asp?utm_source=technet&utm_medium=forum
Fore more information please visit http://www.extraxi.com/?utm_source=technet&utm_medium=forum

bump

Encryptor for Cisco SX20

Similar Messages

Maybe you are looking for