End Action

I'm working in the Adobe CS4 Suite.
I've created an Encore project as simple as possible. There is a main menu with ONE play button, the actual video/audio timeline, and then back to the main menu. That's it. Nothing fancy. You can't make them any more simple.
I've made the dvd and when you put it into a dvd player the main menu comes up and plays this very cool music. Looks great. You hit the play movie button and the video plays just fine w/audio. At the end of the movie, however, it just stops. It does not return to the main menu as I've asked it to.
I used the curly cues and thought I linked it correctly. I have now changed it to every possible configuration, but it still just stops.
What am I doing wrong????? It's driving me crazy. Can anyone help me on this?

I used the curly cues and thought I linked it correctly.
That little "coil" is the Pickwhip. It works very well, so long as one hits the right target - usually pretty easy to do.
For your Timeline, you will want the End Action to be either Return to Last Menu, or to the exact Menu. With one Button, you will not have that many choices from the drop-down list. If you had multiple Buttons, you would have options to choose to Return and have any of those Buttons ready to go. Nice touch.
Now, do you have ANY Overrides set anywhere? If your End Action is per the above, then you most likely do. You do NOT want any Overrides. Be very careful, when you go looking for an Override, as they can be almost anywhere. Do NOT use any Overrides, and as you find them, make sure that each and every one is set to Not Set.
Good luck,
Hunt

Similar Messages

  • End action doesn't work

    Okay, it doesn't matter what I do end action doesn't work. Here's the situation. I have three timelines. The Title for starting, the main video, and the credits rolling at thend. When the Title timeline is done playing at the end, it should go to the main video and the main video timeline is done, it should go to the credits but it's not working. In each of the End action of three timelines, I did specify where it should go next. But this doesn't work. So I try to specify where it should go next on the End Action of the last chapter for three timeline but that doens't work either. So I tried specify in the last chapter and also the timeline end action and nothing changes during preview. Please help.

    Stupid question:- what exactly does the override do? Override the remote control action, or the end action or both?
    Linking each chapter to the next, and the next timeline, allows for the whole project to play continuously, but the end action on the final chapter is always messing things up.

  • "Orphan Timeline" & "End Action Not Set." What does this mean????

    I am setting up a Blu-Ray DVD in Encore. I have a project on a Premiere Pro CS 5.5 Timeline, which is 2 and a half hours long with 24 Encore chapters in it. I have not yet Encoded it in Media Encoder as of yet.
    I am setting up all my menus and buttons in Encore so all I have to do is link the buttons to them main project when I do encode it and then I can just Check it and Burn it.
    I did check my project just now though and all buttons came up with 2 Errors:
    1) Orphan Timeline
    2) End action not set.
    1) "Orphan Timeline", I assume that means that the button is not linked to any timeline as of yet, correct? (This would be true because there is no main project timeline in there yet.)
    2) "End action not set." What does this mean? Will this go away once I add my whole project into Encore and I link up all of the buttons to the timeline?
    Thanks in advance
    Premiere Pro CS 5.5
    Encore 5.5
    Media Encoder 5

    1) Orphan Timeline
    2) End action not set.
    Both of these suggest that you created a timeline in the Encore project, perhaps with no "asset" in it.
    Yes, ignore both messages for now. But I prefer creating the timeline after, or along with, importing the asset into the Encore project.
    If you believe you have not created a timeline, post a screenshot of your "flowchart."

  • How do you set the End Action on last slide of slideshow

    Encore DVD CS3.
    I must be the village idiot. I have setup a slideshow with manual advance. I cannot find a way to set the end action for the last slide. When I click on the last slide in the slideshow timeline there is no option that I can find for end action. When I preview the slideshow the last slide goes to black. I set the manual advance for all slides. There is several mentions of end action but no info on how to do it.
    Appreciate advice. Very frustrating.
    Clif
    BTW Why are there no reference books for Encore CS3? It seems very strange. It has been out for a while but NO books.

    Thank you for your help. I did what you said but the last slide still goes to black. The last slide also ignores the "manual Advance" and goes to black.
    I highlighted the slideshow timeline in the project window and set end action on the properties panel on the right to the slideshow itself. But the last slide quickly goes to black. Each slide except the last one has a box in the upper right corner indicating a cross dissolve transition. I set the slide duration to "manual advance" for the whole slideshow. I feel like an idiot but nothing seems to change the end action of the slideshow or the last slide. Always cuts to black and stops.
    Clif

  • End action vs Override

    Encore CS4:  I'm confused on the override function.  Page 146 of the manual says:
    "... If the viewer wants to play the clips individually, you can make the player to return to the main menu after playing a single timeline. For achieving this, you create separate buttons for each timeline. Then you link each button to its individual timeline and set the override for the link..."
    I only have one timeline and several chapter makers.  Should I be able to substitute "Chaper Makers" for timeline in the above?
    For example, I have one time line with Chapter markers A, B, C, D, E
    1st menu option is "Play All" and plays A-E in order.
    "Play A" button plays A then goes back to menu.  Same for B, and D button.
    "Play C' button plays C chapter then E (since they are related) then goes back to menu.
    I have use chapter playlists in the past but can this be accomplished using end actions and overrides?

    Thanks, that's what I thought.  Playlists are easier even though they need a few more mouse clicks.
    (Not Blu-Ray).

  • 'End Action' not working in Hardware player when chapter skipping. Suggestions?

    Hey all. I am building a 2 disc BD set of my old band and have everything built using Encore CS5. The majority of functionality is working correctly however, I have a couple nagging issues that I can't seem to figure out. I am getting different results when simulating in Encore and testing on a hardware player (Panasonic BDT210, and PS3).
    - The first disc has 10 buttons on a single menu page. The second disc has 1 menu page with 3 sub pages (4 total). Each button plays a different clip. At the end of media (End Action), it is supposed to return to the main menu with the button highlighted. Here's the kicker: When simulating in Encore, each clip plays through and returns to the main menu correctly, whether playing through, or chapter skipping through to the end. However, when playing back on a hardware player, all clips return correctly when playing through. But 3 out of the 10 clips on disc 1, and 2 out of the 7 clips on disc 2 will NOT return when trying to chapter skip out. I keep getting a player error stating "this option is not allowed" and you have to watch the remainder of the clip to the end, or Top Menu out. In each of the 5 clips, all chapters work but you can't skip out.
    It doesn't seem to be a problem with the amount of chapters because some only have one, and some have up to 8. I double checked the "End Action" settings for every clip and they are set correctly. Plus everything works in Encore but not on disc. Why is there a problem with some clips and not others? They are all encoded the same.
    Any help for this would be great. I work in the industry and it's frustrating when you can't figure out something simple like this. Thanks.

    Could you post a screen shot of the flowchart window showing all the links and navigation?
    -Ramesh.

  • In Encore I get an error in the check project window of "can't execute end action because of final chapter marker"

    I have imported a project to Encore and while it worked the first time, this time I get an error in the check project winder of can't execute chapter 2 end action because of final end marker?  I have two different sections that have buttons on the menu.  When you get to the end of the first sequence I need it to go back to the menu and it is saying that it can't because of the end action on the final marker.

    The 'unable to locate' message means that you don't have those music files on that computer, or that they are not where iTunes is expecting them to be. How did you get the entries for those tracks in your new computer's iTunes ?
    If you still have your old computer then you can try copying them over again : http://support.apple.com/kb/HT4527
    You may also be able to re-download them from the store (checking for available downloads only checks for items that have not yet been downloaded, not for past purchases) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page (re-downloading music isn't possible in all countries). You may need to delete them form your library first (where you are getting the 'unable to locate' message), otherwise iTunes will assume that you still have them somewhere and won't let you re-download them.
    Re-downloading : http://support.apple.com/kb/HT2519

  • Chapter playlist end action not working right

    Using Encore CS4 I have created nine sub-menus and each one contains a Chapter Playlist assigned to a button. The submenu's are titled by year starting with 2002. The problem I am having is that no matter what I set the end action or override to all the sub-menus return to the 2002 sub-menu. I have tried all the options for end action and override: return here, stop, link back to that same years sub-menu, stop, return to last menu and they all return me to the 2002 sub-menu.
    Any suggestions?
    Thank you.

    Please outline how you want the finished DVD to behave.  You'll help yourself out *a lot* if you hand-draw (with pencil and paper) a flowchart that shows how you want the audience to get from here to there and back again.
    Until you do that, you will struggle with your disc's navigation.
    That said, there are always several ways to achieve your navigation goals.  Your existing design may work once all of the overrides are removed.  You still haven't described what happens when you change all of the overrides in the project to Not Set.
    -Jeff

  • Chapter point End Action not working

    I'm creating a a training DVD in which one timeline has several spots where the DVD should pause while the class discusses the scene that has just played. I've added 5 seconds of black to mark those spots, and at the beginning of the black I have a chapter point that has an End Action to go to a menu with a "Continue" button. At the end of the black I have another chapter point that the "Continue" button links to. On one of the point that route to the "Continue" menu, it doesn't route to the menu, but just jumps back to the last chapter point...essentially looping that section. It doesn't do this when I "Preview" from the main menu...all works correctly there, but when I Build the project to DVD Folders and play on my PC, that's when it happens.
    Steve Brame

    Nope...no overrides are set. I have several other chapter points on the timeline that are set up identical to this one, and they link correctly to their respective menus...only this one didn't. I deleted the point and recreated it and now it works. I'd noticed several other Chapter Point issues here that were solved by this action.
    Thanks!

  • Chapter end action triggers General Error - Help please!

    Hi, I am working on a project and have come to a big problem in the last hurdle, classic! Really need your help, experts!
    I have 2 Timelines, each one with 6 audio tracks and 2 subtitle tracks
    One of the timelines is longer than the other one because it has two different films in it.
    Everything was working fine until I realised I had forgotten to set the end action to the last chapter of the first video in the timeline, I need it to either stop or return to main menu or last menu, otherwise it will go on to play the second film and i don't want this to happen.
    When I set the end action to the chapter 10, it looks fine, I check and no problems.
    But when it starts transcoding... after a bit, when it has transcoded all the languages it goes to prepare to build and I get GENERAL ERROR and it freezes.
    Please please please if somebody can help me it would be very much appreciated.
    Mariana
    ps I have no overrides or anything like that in the whole project

    Please list the Assets on each of the two Timelines with full detail. A screen-cap of each would probably be very useful and save you some typing.
    Some things to also think about is are there any spots where your Audio is longer (even very slightly) than the accompanying Video? Are there any gaps on any of the Timelines? When you added that "End Action," exactly how/where did you add it? Also, if you have any Chapter Playlists, or Playlists, please give details on those.
    Note: to attach the screen-caps, us the little "camera" icon on the editing screen:
    Good luck,
    Hunt

  • Exporting to Encore - build errors - ? "end action" and "Title remote"

    Hello,
    When I choose to export to encore, I and when it is time to build the DVD, it tells me I have 2 errors:
    - End action not set
    - Title remote not set
    Why are these errors appearing, does anyone know ?
    What I am doing, is exporting a portion of my timeline to encore, when the DVD is ready to be burnt, the DVD tray opens, I then cancel the process because I don't wish to burn to DVD, and then from there, I press "build" which will build the .vobs directly to the hard drive. It is then, after pressing "build" that I get the 2 errors above.
    Any help is much appreciated.
    Dave.

    You can also learn about them by reading the Encore manual or Help file.

  • Black pause between timeline and end action

    I am using Encore DVD 2.0 and After effects 5.5
    I made my menu in Photoshop and animated it in After Effects. I brought them both into Encore DVD, set the animation as first play and the end action as the static menu. When I preview it, there is a few seconds of black between the 2. I want the transition to look seamless. Is there a setting to get rid of the black? or is there any other way to do this without having to go out and buy a better version of after effects?

    I want to solve the same issue!! Did you solved yet???
    Where are you observing the black "pause," in Encore's Preview, or on a burned test DVD RW on a set-top player?
    That can make all of the difference.
    Good luck,
    Hunt

  • Adobe Encore CS4: End action will not execute because of end action on the final chapter point

    Error screen:
    Error I’m getting for section titled Notes (PP 45 second video): “End action will not execute because of end action on the final chapter point.”
    The icon that shows error is in top line second from end.  I’m trying to 'end action' that portion of the video by going back to 'menu default'; also tried end action w/ ‘Stop’ and neither work.
    I saw a post about checking timeline.  Not sure what I’m looking for there.  I have nothing in Orphanage area.  I also tried building despite Check Project error and it will not build project.  Any suggestions on how to fix: “End action will not execute because of end action on the final chapter point.”?

    Select chapter one on that timelne. Look in the properties panel. Does it have an end action? You do not want an end action on the chapter; just on the timeline itself.
    That will not generally prevent a build, however. So you may have other issues.

  • Encore's (cs5) 'end action'- more like 'no action'

    anyone know of issues with CS5 Encore's end action not working. I've linked my end action from chapter one to chapter two, etc and/or end actioned my time lines in many trial and always errors ways. I can't seem to get passed the second chapter before it links to Main menu page.
    Also, getting a runtime error when trying to open Encore...??
    StuckinFlorida

    End actions work fine for me in CS5.
    I am not using the link one chapter to another workflow, however.
    This method is often paired with overrides; do you have any set?

  • Encore CS3 First Play and End Action problems

    I have one menu, one timeline. I'm trying to have the DVD start with the menu for about 2 minutes, the length of the audio asset linked to, then start the first chapter of the timeline. No overrides used in the project.
    First Play of the disc: set to the default menu.
    End action of the menu: set to first chapter of timeline.
    Menu-motion: Audio linked to an audio asset, duration about 2 minutes.
    In Encore DVD 2.0 this was trivial and worked. Not in CS3!
    Most of the time it loops the menu indefinitely. Sometimes it will loop twice, then start the chapter.
    Preview from the menu works. Preview from the disc doesn't, nor the final DVD burn. I've seen this was discussed here before, I just can't find the topic.
    Any fixes?
    Thanks

    Johnathan,
    Tell us more about your Assets on this Play First Timeline. What are the files, format, Duration, etc.? Is this file muxed, or elemental streams? The greater the detail, the better.
    I have not seen the behavior that you observe, hence my questions.
    Hunt

Maybe you are looking for