End call Answer in verizon

My friends and I are iphone 4S users throgh Verizon. None of us is able to get "End Call + Answer" (AT&T users are getting this with Red background as 3rd and last option) button when we receive another call while talking on one call. We are just getting "End Call" (in red background). First 2 options in the scenario of getting another call are same on AT&T and Verizon users' iphones.
As effect of lack of this option, we cannot end our current call and accept another. We have to take second and keep swiping between two calls, if we do not want to redial. Also, we cannot end either of call, it has to be end of both calls!!
When I went with this issue at several Verizon service centers, they were surprised with the problem, but had no other answer other than to contact apple.

Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414?viewlocale=en_US

Similar Messages

End Call + Answer

When you are on a call and another call comes in the choices it gives are "Ignore" call & "Hold Call + Answer." Most of the time I just want to end the call I am on & answer the new call. Why does it give such screwy options?

Page 58 of the user guide:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

No "End + Answer" or "Merge" calls options on Verizon iPhone???

Hello,
I had the iPhone 4 on AT&T, but recently switched to the Verizon version. There are several major problems that I have noticed:
1) When on a call, there is no "End + Answer" button when a new call comes through. The only buttons are "Ignore" and "Hold + Answer". This is a MAJOR problem for me right now
2) When on a call and I use the "Hold + Answer" button, there is no "Merge" calls option. How can this be possible?
3) On the Phone settings, there is no easy way to forward calls like on the AT&T version.
Any help is GREATLY appreciated as I am ready to switch back.
Thanks,
Danny
Message was edited by: witts

This is obvsiously a response to and old post, but I just compared the difference between the call functions on the Verizon iPhone 4S and the AT&T iPhone 4. For Verizon, when someone is talking on the phone, and another person calls, your only options are to Ignore, Hold Call and Answer, or End. The first two operate the same on both each type of phone. The "End" function on the Verizon ends the current conversation, and waits for the new call to be rereceived. That's not exactly a technical term, but what happens is that all phone calls end (the screen actually goes back to the phone app recent call screen or keypad), and the 2nd call that was received rerings the phone. The person calling the phone hears a normal ringing tone with the intermittent beeps that signals the other person is on the other line. I hope this makes sense to you. When someone calls the AT&T phone, the options are Ignore, Hold Call and Answer, and End Call and Answer. If you select the End Call and Answer, the phone immediately ends the current call and changes to the new call. Interesting difference, particularly when compared side-by-side, or when an AT&T iPhone user tries to help a Verizon iPhone user. Have fun figuring out why this exists and who is to blame!

What happened to the end call and answer button

When you are on a call and someone else calls in, there used to be an option for end call adn answer. Now there is ignore, hold call and answer, end, send message and some other option, but no "end call and answer". Any help??

This seems to be GSM (AT&T) vs CDMA (Verizon) issue, not an Apple h/w or iOS issue.
Here is a link that sheds some light on it: https://discussions.apple.com/thread/2753071?start=0&tstart=0
Another link with some tips: http://forums.macrumors.com/showthread.php?t=1317331
I used to be w/ AT&T, and recently switched to Verizon for LTE+iP5, and lack of this option (end call and answer) drives me nuts. But, one learns to live with it, until someone at Verizon decided to do something about it.
Message was edited by: moemann

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HF-300 & answer/end-call key

Argh! I can't get the answer/end call key to answer or end my calls on my HF-300. I'm using a 3110 classic which is listed as a compatible phone on the front of the box.
I have tried it out with a 6300 also and I have the same problem (6300 is ALSO listed on the front of the box).
The only one I can get to work is my N95. I presure that symbian has something to do with it?
I have read that older batches of the HF-300 have had problems maintaining calls for longer than 5 minutes but no one has listed my problem.
I cannot find any specific information that states that the 3110 classic is NOT fully compatible with the functions of the HF-300.
Oh and I have already tried 4 different HF-300's to see if the first one had a fault.

I think you've pointed out the issue, the 3110 and 6300 use the S40 interface, whereas the N95 (and my 6110 Navigator) use the S60 3rd Edition interface, both of which have no problems with the HF-300. You might try and download any updates, if available, to sort out your problem.

IPhone not hanging up on "End Call"

This occurs frequently, about 1 out of every 5 calls I make. When I hit the red "End Call," at the conclusion of a conversation, my phone hangs with it reading, "call ending..." It does not ever read the normal "call ended" and will stay that way until the screen dims. I then have to reboot the iPhone and everything works normally on the iPhone until it happens again within a few phone calls.
I am running 1.1.1 (3A109a) and have done nothing peculiar to the iphone. (No 3rd-party apps or jailbreak.)
Just wondering if anyone else is experiencing this…thanks.
Message was edited by: JKosh

First thing that you should do is update to 1.1.2. Apple fixed many bugs like that in that patch. Normally its something to do with the call line itself, like if you're phoning a Verizon person or a T-moble machine.
Do you end the call or does the other person end the call? Try having the other person end the call and see what happens. Also, ask who their provider is and if that doesn't help call AT&T and see what they say.

Can I transfer a call to another Verizon cell in the middle of a call?

Does anyone know if it is possible to transfer a call to another Verizon cell in the middle of a call? Not call forwarding, but transfer during the call?
So, I answer the phone and talk to the caller. Then, I want to transfer the caller to Joe on another cell phone. Is there any way to put the caller on hold and transfer the call to Joe's Verizon cell?
My understanding is that call forwarding only works for the initial phone call - the call forwards to another number, but it won't work in the middle of a call.
Any help is appreciated!
Thanks

All the older Nokia phones you answer a call – you can put it on hold – call someone else, tell him/her that you are transferring a call – press 4 and hang up. Those two can continue the conversation together.
That’s what I’m looking for.
With Lumia I don’t want to be the 3rd wheel in the conversation...
I haven't found the way to end the call so that the others could continue (not even with conference call)

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to access my calendar while on a phone call on my Verizon iPhone?

When I'm on a phone call on my Verizon iPhone 4, it doesn't appear that I can leave the phone screen to view, for example, my calendar. Is there a way to access my calendar while on a phone call? Thanks in advance for your time and responses.

During a call, press the home button (note the green bar at the top of the screen). Navigate to your Calendar app and open it.
The Calendar app won't be able to update OTA during the call but you should be able to see everything that was there before the call.

When in phone mode black screen and no option to "end call" power dwn req

ok so heres my problem after i updated to 4.0.2 now when i use the "phone" to make recieve call screen goes blank and i loose the option to "end call" then to get outta call i have to press power button and home button to reset i hav already went to itunes and rebooted my phone hoping that would fix it but nope its still jacked up anyone can help?? any ideas

in phone mode, I face the same problem. I call and then I have to enter a series of numbers to make an international call, but the screen goes blank completely
This is little bit weird. I am using iphone 3gs; works with other functions, but for the phone. The phone becomes completely useless after I make any call.
Good that it is still in the 30 day trial period; plan to return it.

Bug in LP: smart call/answering machine 1.28

Bug in smart call/ answering machine in Lp 1.28
Smart call have 2 bugs and one suggestion.
1. Sometimes smart call isnt work. After restart phone its works again. I test in some devices and all of them have this bug.
2. While talking phone if someone is waiting on another call, after seprate phone from ear and see who is on another call. So after bring device to ear call accepted and old call end. This is so annoying.
3. Seprate smart call options. I dont want answer my phone with bring device to ear but i need to reject and mute mode.. Plz
And about answering machine.
In lollipop answering machine have some problems.. For example sometimes i am taking with phone and answering machine starts automatically and call ended. Or sometimes calls dont go to answering machine.
Some ui bugs:
3 dot icon is bigger in phone/contacts app vs other stock apps
Small apps page isnt material yet
Sorry for my bad english..my phone is z2 23,1.a.1.28

Contact Sony Xperia Support with your bug report .
http://support.sonymobile.com/global-en/contactUs/

Iphone screen is black when I remove the phone from my ear; can't end call

This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

Hey jps42247,
Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
If you don't have a case on the iPhone, try resetting or restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
Jason

Iphone 5 doesn't end call and Siri problems. Need help.

I can barely open my screen before it closes and when I hit end call--it doesn't. The screen kicks off and goes black--anyone else experiencing this?
Plus, Siri is acting up and doesn't get the question and the screen goes blank quickly.
I was switched out for a new phone after all the other issues relating to lack of signal and battery drainage. So, I now have a new phone with a complete new install and now this. I have rebooted to the apple screen--nothing seems to be working to solve this.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help make an appointment at an App,e Store to have your iPhone looked at by a service technician.

Ios5.0.1, can't receive calls, can't end call, can't take video!!!!!

After installed ios5.0.1, can't receive calls, can't end call, can't take video!! The screen become frozen! Any help please? Thx!

How about going to a corporate store and see if they will let you put your SIM card in a display model. Your number will transfer over with the SIM card. Then if you call your number from your wife's phone or one of store landline phones and the call goes through, you have ruled out the SIM card being the problem.
You don't have the phone number set to automatically forward to the voicemail, do you?

End call Answer in verizon

Similar Messages

Maybe you are looking for