End call by sliding down slider on nokia n95 - any...

I have a nokia n95 and was wondering if there were any settings/freeware signed applications you could install to end the call by sliding down the slider?
Thanks
Andrew

The N95 doesn't have this built in, but there's a 3rd party application out there called "ShutUp", I think, which should do the trick for you.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • My volume slide on my itouch keeps sliding down to silent...any suggestions?

    While playing my iPod on my iTouch, the volume control button won't stay put and keeps sliding down to mute.

    Try resetting the iPad first. It will not cause any loss of data.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that does not work, reset all Settings. Settings>General>Reset>Reset all settings. This will cause no loss of data either, but you will have to enter all of the iPad settings in the settings app again.

  • Slider issue nokia n95 8gig

    Hi
    had my n95 8gig just 4 day's ( purchased 1/09/08 ) and already the slider is loose.
    i know this matter has been brought up in past posts but just wondering if other new owners/users are experiencing the same.
    under warranty can this be repaired? or is it normal?
    Apart from the slider issue, the n95 8gig is great !
    i realise its not a perfect world but for $800 i expect the slider to be sturdier than it is.
    look forward to other users comments.
    Message Edited by warmride on 05-Sep-2008 09:20 AM

    It can be fixed mate but i'd ask at a Service center as trying to fix them yourself could end up with you mucking the slide mechanism up which you don't want.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • Ending calls with slider on N95?

    I just today received my new N95 and love it but was wondering if it possible to end calls by closing the slider or indeed to cancel menus by doing the same thing ... I am used to using other slide phones which have these functions but the N95 doesn't seem to work in the same way and I was wondering if there was an option somewhere to change this?
    Thanks, Matt
    3210 > 3510i > 6230i > N73 > N73 ME > N95

    /discussions/board/message?board.id=smartphones&thread.id=76456
    can't wait for n97 successor

  • My volume slide on my itouch keeps sliding down to silent???

    my volume slide on my itouch keeps sliding down to silent???

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. Done
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Nokia lumia 800 end call problems

    I had a problem ending calls which looks like a common problem. I had a screen protector which was not a genuine Nokia item. I removed this screen protector and problem solved it now works hooray.
    Solved!
    Go to Solution.

    Hi
    Glad to hear you solved your issue, the screen protector will interfere with the proximity sensor so it is not recommend to use one.
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • HT4528 My iPhone 4S won't let me end calls. I have read to restart your phone, but my power button doesn't work so I can't do that. Does anyone have any suggestions.

    My Iphone 4s wont let me end calls. It freezes on the call screen. I can press END CALL many times and try to end it, but it wont end. I have read that I need to restart my phone or turn it off then turn it back on, but my power button doesnt work.  Can anyone help me or give me suggestions. Thank you!

    i think its the assistive touch bc i got that when my home button broke and my lock button is also broken and now it wont let me slid the unlock button, and i shut it down then turned it back on so it automatically showed the keypad and it would only let me press 3 and thats it. i also read a few other topics about it not unlocking and they all used the assistive touch.

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Iphone 5 doesn't end call and Siri problems. Need help.

    I can barely open my screen before it closes and when I hit end call--it doesn't. The screen kicks off and goes black--anyone else experiencing this?
    Plus, Siri is acting up and doesn't get the question and the screen goes blank quickly.
    I was switched out for a new phone after all the other issues relating to lack of signal and battery drainage. So, I now have a new phone with a complete new install and now this. I have rebooted to the apple screen--nothing seems to be working to solve this.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help make an appointment at an App,e Store to have your iPhone looked at by a service technician.

  • End Call not responsive

    When I start to make a call, pressing the END Call is not responsive and the recipient receive a missed call. It takes 3 seconds to respond. 

    Hi and Welcome to the Community!
    Can you clarify please...why would you be using the "End Call" when you "start to make a call"?
    In any event...anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Also please check your BB10 OS level:
    Article ID: KB23393 How to check the model number and version of the operating system on a BlackBerry smartphone
    If you are on anything prior to 10.2.1.3247, then it is strongly advised that you update to that level ASAP. Sachesi is a very good method to do so:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Sudden "end call" during a call

    It regularly happens so that during an answered phone call,
    there is a sudden beep (short slighly annoying signal) and
    call ends right afterwards.
    If this is due to screen sensitivity -  is there a possibility to change
    the screen sensitivity settings or change the way how the "end call"
    button work (not by simply pressing, but, say, by some sliding gesture) 
    p.s. just swapped from iOS to android 

    Hi ruslanskalvans,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    When you are on a call, does the screen stay on the whole time? 
    As Uliwooly stated it could be the proximity sensor, you may want to try a diagnostics test.
    Menu > Settings > About phone > Diagnostics > Proximity sensor.
    Let us know.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Can't end calls?

    I have an iPad mini, received it six days ago, but a couple days ago, I can no longer end call, be it phone or FaceTime, does anyone have any suggestions? All other buttons work, and they're all onscreen but pressing end call does nothing.

    Try the basics. Close the Facetime and Messages apps, and reset the iPad. No data will be lost.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
    If that didn't work, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

  • Lumia 610 Can't End Calls

    Hi,
    I just got my Lumia yesterday evening. I'm from Malaysia by the way. The problem presist whenever I'm making a call or even when someone calls me, I can't seem to end the calls. Whenever I'm making an outgoing calls, the screen goes blank, and all the buttons including the back, home and search buttons becomes unresponsive. The only way to end calls is to wait for the other party to end the call, or I just have to wait until the dial tones end. What if the other party has their voicemail enabled? I have to wait until the voicemail call ends, then only I can continue using my phone. either those or I just had to switch off the phone by pressing the power button for 10 seconds.
    please rectify and solve this issue immediately.
    Solved!
    Go to Solution.

    Hi shazzmania,
    Thanks for posting and welcome to the forum.
    Did you leave the factory screen protector on or did you place a 3rd party protector? What you describe is often caused by the screen protector covering the proximity sensor. On the Lumia 610 this protector is on the top-left on the front.
    You can test the sensor by entering ##634# and starting the proximity test. A yellow circle should appear and when you move your hand over the sensor it should turn green. If it comes up and stays green the sensor is either blocked or defective. In that case make sure it is free and if it is return to your supplier or visit a Nokia Care Point.
    Hope this helps, let us know how you get on.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • When i try to make a call it automatically goes to end call and back to my contacts

    when i try to make a call it automatically goes to end call and back to my contacts

    This is a common problem with iPhone 4s (and IOS 5)  There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.

  • Skype End Call buttons fails, logging fixes?

    So, I was originally using Skype, wanted to call my friend today.
    I tried to call him, only for him to im me saying he couldn't chat. I tried to end the call.....
    Only for the call not to end, ever. Alt and page down, Right click and end call, tab and spam enter over end call button, nothing worked!
    So, i reloaded skype after ending skype exe by taskmanage.. Same issue occurs with another friend. It repeats, multiple times. The only time it stops, is after i restart my computer, and only for 10 seconds.
    So, I get the logging tool, run it to try and track the source of the issues, run skype, and try to call a friend.....
    I was able to succesfully end the call that time, and other times after that.
    Question: Why? Was it because the logger fixed a skype registry or something? or was it because of something else entirely? I would show logs, but it would probably show nothing out of the ordinary!

    Try to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
    Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
    Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Maybe you are looking for

  • Having problems with gradient fill.

    Having problems with gradient fill. Not sure how to select the gradient circles between outer circles consistently especially when there are more than 3 colors.

  • OS discs - wrong ones?

    Well, was loving my new refurb Mac until two nights ago...did a software update, during which i got a message saying the update had unexpectedly terminated. so i surfed a bit then switched my Mac off. Went back to it about 30 mins later, tried to tur

  • Solaris 10 x86 stable on Intel Xeon Woodcrest CPUs?

    We are looking at deploying Solaris 10 x86 for a new mail server project (using ZFS as the FS). In the past, we've purchased mostly Dell PowerEdge servers, and this will be our first foray into Solaris. I'm looking at using a HP Server for this proje

  • Starting my macbook resets keychain on all other devices

    I had activated the icloud keychain on my MacBook (mid 2010). Now every time I boot up my MacBook the icloud keychain on my iMac and iPhone is reset and I have to reactivate it doing the whole process entering the apple ID and safety codes, and so on

  • I still cannot access gov tax form VA-5, although I have the latest updated Adobe Reader version.

    Although I have the latest version of Adobe Reader, I still can't bring up the gov form VA-5, which I've always used to file & pay our qrtly state withholdings tax.  I get only a blank, white screen.  Can you help?