End Call Not Working

Is anybody else having problems ending a call with the stop button on screen on Iphone 5?

OK, I was having the same problem, but it was with a Lifeproof case on the phone. I was searching this site and saw someone here mention the Lifeproof case. I took my phone out and the END button majically worked. I was very maticulous on how I reinstalled the phone in the case, and the END button is working fine. Guess the Lifeproof case is part of the problem at least in my case.

Similar Messages

Merge call not working in ios7 on Iphone5

Merge call not working in ios7 on Iphone5 ?

Same here. We have this call center in our company where after i have added a call to merge i have to push no. 4 and dial from the keypad. This has never been possible in ios but it have been possible to create a contact called "Merge" and add number 4 as it's phone number. Now by merging first my clients call to my collegegue and then to this "Merge" contact it has been dropping me out of line and my client and collegue are merged.
Now ios 7 wont let me call to this "Merge" contact's number "4"

Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
It always says call back ...
incoming is working
i tried number of sim cards from different networks but same issue
tries resetting network settings but it also didnt worked

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Calling not working

I continuously try calling and getting called by my friends who live across the state, only to have the call not work for me. I don't get any ringing or the pop-up window, it just shows me that they are in a call. When I do try to join, it sits there for approximately 30 seconds trying to connect and then kicks me out of the call. I have reset Skype, I have checked for updates; I have the most recent one, I'm up to date. They all have no problem calling with each other but I cannot join or make calls. Oddly enough, there is only one person I can call or get calls from out of our group, but I don't receive a notification unless it's from her. I have tried calling echo and it works every time but not with my friends. Please send help or something to try to fix this problem, it is making Skype unuseable.

Glad we found a workaround. On which network and in which country are you roaming? And who is your home network operator?
This would help Nokia to investigate. And it helps those to find the workaround who find this thread via an search on the Internet.

Click to call not working with Firefox 31 in Windo...

Hello All,
I have a problem with Click to Call in my new computer.
Windows 8.1
Skype 6.20.0.104
Click to call 7.3.16540.9015
Firefox 31
Click to Call not working with Firefox.
With IE11 it ok.
When I directly copy the URL "skype:+48xxxxxxxxx?call" into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
Please help me.
Maybe someone have a solution ?
Best Regards
Jarek
ps. Sorry for my english

Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

Skype Calls Not Working

I always used skype and it worked perfectly fine. But about a month ago, calls stopped working. When I tried calling someone it would say Connecting, but the timer would stay at 00:00. Then after the call ending/going to voice mail, it would tell the person that there was a missed call. However, they wouldn't get a notification popping up saying that I was trying to call. Same for me when they tried calling it wouldn't work and I will see that there was a missed call even though I was looking at my screen when they were trying to call. There would be no window popping up asking to accept the call as well. I tried doing stuff like deleting the Db temp files and renaming the skype program folder and it did not help. I need help with this because it is so frustrating. I even tried making new account and it would keep doing this.

Have you got this question resolved ever since? I've got the same problem with my iphone 5S. I've bought it a month ago as part of a 2 year contract with Orange France. My plan has 2Gb data on 4G. But only when I'm on wifi does any of those work (viber, facetime, skype). Once on data plan, no matter where I am in Paris, I can't hear people answering my facetime/skype/viber calls and they can't hear me either. Even though the status shows 4G (or sometimes 3G). I've tried disabling 4G and forcing 3G, the same. I've got the iphone replaced, then the SIM card replaced, the problem stays. I still have more than 1Gb left from my data so that's certainly not the problem. All softwares are updated (certainly downloaded, re-installed everything several times, phone factory reset, etc). I pay like 45 euros a month so I can't imagine this would be a 'simple plan' or maybe my VoIP got somehow disabled by mistake? I've been to 5 Orange stores and they sent me away that it must be application problem they don't know what's wrong. As I said, Apple got my iphone even replaced but didn't have more suggestions when it still didn't work. I'm kinda hopeless, doomed to go for 2 years with an iPhone 5S that can't use any audio communication applications from its data plan. Which is ridiculous cause that's one of the main reason I've bought a 5S, I was told this one can do Facetime on data plan too, not just on wifi.

AT END OF not working?

LOOP AT itab_opltext1 WHERE aufnr = itab_header-aufnr AND txtid = 'AVOT'.
New Text Starts .
          ON CHANGE OF itab_opltext1-tname.
            first = 'X'.
          ENDON.
          DATA: v_opno(4).
          v_opno = itab_opltext1-opno.
          SHIFT v_opno LEFT DELETING LEADING ' '.
    padding zeros into OPN NO field.
          str_len = STRLEN( v_opno ).
          no_of_zeros = p_field_opn_len - str_len.
          DO no_of_zeros TIMES.
            CONCATENATE '0' v_opno INTO v_opno.
          ENDDO.
          IF first = 'X'. " first Text for oprn no
            SELECT SINGLE aufpl FROM afko INTO v_aufpl
            WHERE aufnr = v_order.
            SELECT SINGLE aplzl FROM afvc INTO v_aplzl
            WHERE aufpl = v_aufpl AND vornr = v_opno.
            MOVE 'AUFK' TO lv_header-tdobject.
         CONCATENATE sy-mandt v_aufpl v_aplzl INTO lv_header-tdname.
            MOVE 'AVOT' TO lv_header-tdid.
            MOVE 'EN' TO lv_header-tdspras.
        to insert blank line
            MOVE '*' TO lt_lines-tdformat.
            MOVE '' TO lt_lines-tdline.
            APPEND lt_lines.
            CLEAR lt_lines.
            CLEAR first.
          ENDIF. "FIRSTENDIF.
INSERTING KOPF LONG TEXT INTO OPERATION 10 LONG TEXT
          IF itab_opltext1-opno = '10'.
           LOOP AT itab_opltext2 WHERE aufnr = itab_opltext1-aufnr AND txtid = 'KOPF'.
              IF sy-subrc EQ 0.
                MOVE '*' TO lt_lines-tdformat.
             MOVE itab_opltext2-txline TO lt_lines-tdline.
                APPEND lt_lines.
                CLEAR lt_lines.
              ENDIF.
            ENDLOOP.
appending Opearion long text
          MOVE '*' TO lt_lines-tdformat.
          MOVE itab_opltext1-txline TO lt_lines-tdline.
          APPEND lt_lines.
          CLEAR lt_lines.
         <b> AT END OF opno.
            last = 'X'.
          ENDAT.</b>
the above code i want to put last = 'x' whene all the operations completed in the internal table itab_opltext1.
Please help me

hi friends before inserting the following code for above code AT END OF was workign now it is not working.
where i am doing worng.
INSERTING KOPF LONG TEXT INTO OPERATION 10 LONG TEXT
IF itab_opltext1-opno = '10'.
LOOP AT itab_opltext2 WHERE aufnr = itab_opltext1-aufnr AND txtid = 'KOPF'.
IF sy-subrc EQ 0.
MOVE '*' TO lt_lines-tdformat.
MOVE itab_opltext2-txline TO lt_lines-tdline.
APPEND lt_lines.
CLEAR lt_lines.
ENDIF.
ENDLOOP.
my total logic loop and endloop as follows.
-- Operation long text (begin)
        LOOP AT itab_opltext WHERE aufnr = itab_header-aufnr.
          itab_opltext1-aufnr = itab_opltext-aufnr.
          itab_opltext1-vornr = itab_opltext-vornr.
          itab_opltext1-opno =   itab_opltext-opno.
          itab_opltext1-txobj = itab_opltext-txobj.
          itab_opltext1-tname = itab_opltext-tname.
          itab_opltext1-txtid = itab_opltext-txtid.
          itab_opltext1-lang = itab_opltext-lang.
          itab_opltext1-counter = itab_opltext-counter.
          itab_opltext1-txline = itab_opltext-txline.
          APPEND   itab_opltext1.
          CLEAR itab_opltext1.
        ENDLOOP.
        itab_opltext2[] = itab_opltext1[].
        SORT itab_opltext2 BY aufnr txtid.
        SORT itab_opltext1 BY aufnr txtid opno.
        LOOP AT itab_opltext1 WHERE aufnr = itab_header-aufnr
                                AND txtid = 'AVOT'.
New Text Starts .
          ON CHANGE OF itab_opltext1-tname.
            first = 'X'.
          ENDON.
          DATA: v_opno(4).
          v_opno = itab_opltext1-opno.
          SHIFT v_opno LEFT DELETING LEADING ' '.
    padding zeros into OPN NO field.
          str_len = STRLEN( v_opno ).
          no_of_zeros = p_field_opn_len - str_len.
          DO no_of_zeros TIMES.
            CONCATENATE '0' v_opno INTO v_opno.
          ENDDO.
          IF first = 'X'. " first Text for oprn no
            SELECT SINGLE aufpl FROM afko INTO v_aufpl
            WHERE aufnr = v_order.
            SELECT SINGLE aplzl FROM afvc INTO v_aplzl
            WHERE aufpl = v_aufpl AND vornr = v_opno.
            MOVE 'AUFK' TO lv_header-tdobject.
            CONCATENATE sy-mandt v_aufpl v_aplzl INTO lv_header-tdname.
            MOVE 'AVOT' TO lv_header-tdid.
            MOVE 'EN' TO lv_header-tdspras.
        to insert blank line
            MOVE '*' TO lt_lines-tdformat.
            MOVE '' TO lt_lines-tdline.
            APPEND lt_lines.
            CLEAR lt_lines.
            CLEAR first.
          ENDIF. "FIRSTENDIF.
INSERTING KOPF LONG TEXT INTO OPERATION 10 LONG TEXT
          IF itab_opltext1-opno = '10'.
            LOOP AT itab_opltext2 WHERE aufnr = itab_opltext1-aufnr
                                    AND txtid = 'KOPF'.
              IF sy-subrc EQ 0.
                MOVE '*' TO lt_lines-tdformat.
                MOVE itab_opltext2-txline TO lt_lines-tdline.
                APPEND lt_lines.
                CLEAR lt_lines.
              ENDIF.
            ENDLOOP.
          ENDIF.
appending Opearion long text
          MOVE '*' TO lt_lines-tdformat.
          MOVE itab_opltext1-txline TO lt_lines-tdline.
          APPEND lt_lines.
          CLEAR lt_lines.
          AT END OF opno.
            last = 'X'.
          ENDAT.
          IF last = 'X'. " last Text for oprn no
            CALL FUNCTION 'SAVE_TEXT'
              EXPORTING
                header          = lv_header
                insert          = 'X'
                savemode_direct = 'X'
              IMPORTING
                newheader       = lv_header
              TABLES
                lines           = lt_lines
              EXCEPTIONS
                id              = 1
                language        = 2
                name            = 3
                object          = 4
                OTHERS          = 5.
            IF sy-subrc = 0.
              UPDATE afvc
               SET txtsp = 'E'
               WHERE aufpl EQ v_aufpl
               AND aplzl EQ v_aplzl.
              COMMIT WORK AND WAIT.
              REFRESH lt_lines.
            ENDIF.
          ENDIF.
        ENDLOOP. "LONG TEXT
        CLEAR last.
        REFRESH lt_lines.
        CLEAR:lv_header,v_opno,v_aplzl.
        REFRESH itab_opltext1.
        CLEAR itab_opltext.
Operation long text (end)

End Call not responsive

When I start to make a call, pressing the END Call is not responsive and the recipient receive a missed call. It takes 3 seconds to respond.

Hi and Welcome to the Community!
Can you clarify please...why would you be using the "End Call" when you "start to make a call"?
In any event...anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Also please check your BB10 OS level:
Article ID: KB23393 How to check the model number and version of the operating system on a BlackBerry smartphone
If you are on anything prior to 10.2.1.3247, then it is strongly advised that you update to that level ASAP. Sachesi is a very good method to do so:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BC Next API call not working on webapp detail page

Hi all
I'm trying to get the CRM data for a specific record using the front end API call...here's the code (fields minimal for posting here)
{module_data resource="customers" version="v3" fields="id,firstName,lastName,email1" skip="0" limit="10" where="\{'id':'10734478'\}" order="id" collection="myData"}
<pre>{{myData|json}}</pre>
This code works fine on a normal page, rendering the expected JSON output, but the exact same code does not work on a webapp detail page, instead I get this result rendered on the page, obviously failing on the where clause for some reason.
{'id':'10734478'\}" order="id" collection="myData"}
Anyone know how to make this work? or is it a BCNext bug?
Thanks
Dave

Hi Dave, if you make this as an Idea so BC can track - its a bug.
It has happened with other things as well where it is not render properly, I thought they had fixed it, but looks to be back
As a side note...
<script>console.log({{myData|json}});</script> Is a lot nicer to manage

Subscription calls not working

I have a 1 year subscription for unlimited calls to UK landlines. I have used it for months without problems but now when I try to call landlines the call doesn't work properly - the connection is bad and although I can usually hear the person on the other end, they cannot hear me. I am using the same computer to make calls that I always have previously. I can still make skype-skype calls with no problem including using video etc but I do not understand why this works when calling landlines doesn't? It is frustrating that it is the service I have paid for that is not working - I am having to call the UK on my mobile phone at a great deal of expense. My subscription is still active and I am calling landlines not mobiles.
Any advice or help resolving the problem will be greatly appreciated. Thank you.

I cannot make calls to the UK .One number I call says I need skype credit or subscription which I have .the other one will not go through.What advice do you have to solve this problem.

Incoming Calls Not Working, Spotty Service

I've been having a issue with my Verizon landline (copper) service for several weeks now. Basically, outgoing calls work fine, but incoming calls are very spotty. Sometimes calls come through as normal, but most of the time the caller will hear one ring then silence, or no rings at all. In any of these circumstances, I can pick up the phone while it is "ringing" and the call connects. When there is a problem, calls do not go to voicemail.
I did the *73 business to deactive call fowarding, but that did not do anything.
I have tried every combination of having devices (DSL modem, cordless phone, corded phone) plugged in or not, but nothing seems to fix the situation. I cannot replicate the situation given a certain set of circumstances, i.e. the porblem exists no matter what combination of devices I have plugged in. It is completely random; a call from my cell phone will connect fine, but if I try 30 seconds later, it doesn't work. Even if no devices are plugged in, I still have the same issue!
I called Verizon, who ran numerous tests, and said everything was fine on their end. Naturally, they offered to send someone to my place for some insane fee; since I rent I obviously would not let them come to fix my lines -- that's my landlord's job. I can have them look at it, but I don't think it will really make a difference.
Oh, and I'm not the only one having this problem:
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/Home-Phone-is-not-working/td-p/163581
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/flaky-incoming-calls-no-rings-sometimes/...
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/Short-chirp-for-in-bound-call-ring/td-p/...
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/Phone-can-call-out-but-cannot-receive-ge...
At this point, I'm sick of dealing wtih this issue. I felt like I got the brush-off from Verizon, who does not seems to care of their copper infrastructure any longer, but is only interested in FiOS customers. I am seriously considering just dropping my landline service entirely, and getting Internet-only from either Verizon (if that's possible, they say I can get FiOS in my apartment, although I don't see how that's possible) or Comcast. I really like having a landline and would not mind paying for decent service, but this rapidly becoming not worth it.

can you please collect debug voice ccapi inout as well?
does the outbound call work through the same gateway?

Mac 10.6.8's video calls not working! Please help!

Reposting the text below because there was no reply to the last message. Ack! Please help. Skype, is there a solution yet? Or even just an explanation and a time frame so we know when we can expect video calls to work again? Thanks! ---------------I have a Mac laptop, version 10.6.8. I have the most updated version of Skype available for my computer, Skype version 6.15. For the past few months, I've been unable to use video chat or file sharing. I can receive some files, but cannot send files. Other people can video chat with me and I can see them, but they can't see me. My built-in camera works just fine for other purposes, so I know it's not an issue with my camera. I've also noticed that a lot of Mac users seem to be having trouble with Skype lately. I've checked my audio/video preferences for Skype and my computer's camera preferences, and everything is as it should be. Does anyone know how to fix this?
Thanks in advance for any help!

See: How to perform a "clean install" of Flash Player in Mac OS X
In addition to these steps, I recommend, BEFORE emptying the trash:
Go to: [User]/Library/Preferences (hold the "Option" key when clicking "Go" from the Finder menu to reveal the hidden Library folder)
Trash the ENTIRE Macromedia folder from there
Aside from that additional step, follow the rest of the instructions to the letter and you should be back up and running.

Skype Click to Call Not Working for Landlines and ...

Hello,
I am trying to use Skype Click to Call, but it does not seem to be working. I was able to call contacts using callto://CONTACT_NAME, but the second I try to call any mobile or landline number (I.E. - callto://9731234567), it does not work. Skype will come up, but it will not make the call. I am running on:
Windows XP - 2002 Version
4 core Pentium processor (1.7 GHz)
256 MB of RAM
Google Chrome
If anyone could provide any insight or ideas, I would really appreciate it. I have already tried a large number of things to fix this issue. Thank you so much for any help!

Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

Function call not working - why?

Hmmmm. I just don't see why this is not working. I have an application with a new class I just created. The class loads, but will not call it's own internal function.
package com.parkerandkent.components.classic.photogallery {
     import caurina.transitions.Tweener;
     import flash.display.MovieClip;
     import flash.events.Event;
     import flash.events.MouseEvent;
     public class CallTag extends MovieClip {
          trace ("test1");
          init();
          private function init():void {
               trace ("test2");
               b_arrow.buttonMode = true;
               b_arrow.addEventListener(MouseEvent.CLICK, arrowMenuCLICK);
          private function arrowMenuCLICK():void {
"Test 2" will not fire here. And I get this error message:
CallTag.as , Line 10        1180: Call to a possibly undefined method init.

package com.parkerandkent.components.classic.photogallery {
     import caurina.transitions.Tweener;
     import flash.display.MovieClip;
     import flash.events.Event;
     import flash.events.MouseEvent;
     public class CallTag extends MovieClip {
function CallTag(){
          trace ("test1");
          init();
          private function init():void {
               trace ("test2");
               b_arrow.buttonMode = true;
               b_arrow.addEventListener(MouseEvent.CLICK, arrowMenuCLICK);
          private function arrowMenuCLICK():void {

SIP Call Not Working

Hello Everyone,
I have two CME sites connected via P2P. I have configured dial peer for calling between two sites. Calls from one site are working but from other site I am not able to make calls. Anyone can help me with this issue?
I am attaching debug ccsip all herewith.
Thanks

Hi Carlo,
This is the output of the debug from where calls are not working. There is no output on the other router.
Log Buffer (6000000 bytes):
001892: Mar 2 2015 11:44:57.370 IST: %SYS-5-CONFIG_I: Configured from console by TSAL.ADMIN on vty0 (192.168.100.12)
001893: Mar 2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   Calling Number=, Called Number=1039, Peer Info Type=DIALPEER_INFO_SPEECH
001894: Mar 2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=1039
001895: Mar 2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
001896: Mar 2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0
001897: Mar 2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
     1: Dial-peer Tag=6
Thanks

End Call Not Working

Similar Messages

Maybe you are looking for