End Date of the Selection Period defaults as tax year end date in P45
Hi,
We have recently implemented both HRSP'S and CLC'S. In addition to this, we have also applied the following SAP Notes:
1. 1305238
2. 1309852
3. 1310431
4. 1316197
Despite this, we are still having the below problem with the P45 Program.
The End Date of the Person Selection Period automatically defaults to the end of the tax year, we are now unable to overide the date suggested by the system.
Can anyone suggest the cause of this issue.
Rgds
Sandy
Hi,
With the Inyear movement legal changes ,HMRC have now introduced a check where in P45 cannot be produced for leavers who have a future leaving date 30 days from the current date.
In line with the above changes,the chance of issuing P45 for future leavers is now checked by the P45 program even though the person selection end date is the tax year end date . So that's why the date is getting defaulted from the tax year.
Hope this could solve your issue.
Regards
Roop
Similar Messages
-
Function which determines the selection period dropdown on MSS Reporting
Hi
I need the function which detemines the dropdown of the selection period on the MSS reporting screen on the Portal.
I know that function: HRWPC_GENERAL_KEYDATE_GET determines the default keydate.
Can anybody please assist?
Regards
MargarietHi
Is there anybody who can assist me with this please?
iet
Regards
Margar -
Team Calendar warning - No Team setup for the user in the selection period.
Good morning,
I am attempting to replace the older iViews (leaverequestapprover and teamcalendar) with the newer iView (approveleaverequest) which seems to combine the two functions.
When implementing the approveleaverequest iView, I get the following mesaage "No Team setup for the user in the selection period. Contact Administrator."
However, looking at the older Team Calendar iView, teamcalendar, I can see the team. Both iViews are assigned to the Team page for comparison.
Not sure what's wrong but I'm confident I have all the configuration correct else the test team members wouldn't be appearing in the older iView. I've read some other unanswered posts that asked the same question and rechecked all the objects people had suggested.
What's even more puzzling, if I have one of my managers submit a leave request to their manager, the approveleaverequest iView will show the entire team with the leave request for the manager waiting for approval.
I'm stumped and could use some guidance on how to get the team calendar to work.
Kind Regards,
Garrett MeredithRe: Manager unable to approve employee leave
chk above thread once and chk any authorisations are missing or else assign and test once for some users
and you need to activate wdabap business function ess_wda_2 in swf5 if ur using abap functionality HCM, ESS on Web Dynpro ABAP 2 - Human Capital Management - SAP Library -
How long is the $24.99 subscription period for iTunes Match, nowhere does it show the time period? Week, month year?
It's an annual amount - it's at the top of that page :
iTunes Match requires an annual subscription fee of $24.99 -
MacBook pro 13 mid '09 not going to sleep after the selected period
Hi i am kinda new to this so i don't know if I am doing this right. Well this is the problem, when i leave the mbp on it's own for a while it doesn't go to sleep after the designated period of time. The laptop goes to sleep when the lid is closed and i have tried the usuals such as resetting the PRAM, restarting, restoring the default sleep times etc. I know this is not a major problem and I probably wasting your time and I'm sorry but it's just one of those annoying things!
Thanks in advance!Is this a new Apple battery? If so bring it to an Apple store for evaluation and probable replacement. If it is a third party battery, it may be suspect.
Ciao. -
No Data Stored For 0006 in the selected period
Can any body help to resolve this issue. it is confirm that record exist for employeenumber because i am getting address information for that employeenumber and i want to update only telephone number only for testing.
my code is as below:
private void changeAddress()
CSApplication.proxyAddrChange proxyaddchange = new CSApplication.proxyAddrChange(destination1.ConnectionString);
CSApplication.BAPIRETURN1 Return11=new CSApplication.BAPIRETURN1();
try
proxyaddchange.Connection.Open();
string subType = "1";
string timeIntervalHigh = "31129999";
string timeIntervalLow = "01011900";
proxyaddchange.Bapi_Addressemp_Change(txtSapId.Text,"","SBTP00095","",subType,"999999",timeIntervalLow,timeIntervalHigh,out Return11);
catch(SAP.Connector.RfcCommunicationException exp)
Label1.Text += exp.Message;
proxyaddchange.Connection.Close();
return;
catch(Exception exp)
Label1.Text += exp.Message;
proxyaddchange.Connection.Close();
return;
finally
if (proxyaddchange.Connection.IsOpen)
proxyaddchange.Connection.Close();
Message was edited by: Adil SiddiquiHi,
Thanks for reply.
i used both
string timeIntervalHigh ="99991231"
string timeIntervalLow = "1900101"
As well as
string timeIntervalHigh ="31129999"
string timeIntervalLow = "01011900"
i tried to run the BAPI by using SE37 Transaction code. same error displayed there and when i tried to enter 99991231 date, system not accepting then i tried 31129999 and system accepted but getting same error.
one strange thing happen that i used same thing
(string timeIntervalHigh = "99991231"
and
string timeIntervalLow = "19000101" )
in Bapi_Persdanl_Getdetailedlist and i am getting records for the same employee.
i am not getting any error. code are working fine but in return table i am getting this message and information not updated in system.
Message was edited by: Adil Siddiqui -
Definition of selection periods to use as defaults in the agent Inbox ICwin
Hi,
I am trying to define the selection periods to use as default in the agent Inbox (planned activities) in the IC Win Client. Any idea how to customize?
Thanks,Please go to transaction SPRO: CRM/IC Win client/Visible Components/Navigation Area/Assign Time Period for Search in Locator
Search type: ONE_ORDER_PLANNED
Search ID: ORDER_PERIOD_PLANNED
And That's it. -
ESS Workplace - Change Default Selection Period
Hi All,
We are on 4.6C, using Workplace 2.1.1 on ESS.
Through ESS, we want to display all items under "SAP Office -> Outbox -> Started Workflows" (and also "Work Items Executed by Me").
The default seems to be 30days.
Our SAP Office (Workplace) on ESS does not have any buttons or toolbar options for users to change the "Selection Period".
My question: Where is this default period set? How can I change it for ESS (eg to be 90 days instead of 30days)?
Is there a setting in the IMG (SPRO)?
Please, I really hope you can help.
Cheers,
Tom
Message was edited by:
Tom PeouHi Tom,
unfortunatelly this function is hard coded in BWSP, there is no option to change the date in customizing or somewhere else, only in coding:
l_seldate = sy-datum - 30.
CALL FUNCTION 'SWI_OUTBOX_CREATE'
EXPORTING
seldate = l_seldate
folrg = w1_fol
TABLES
worklist = worklist
STATUSFILTER =
EXCEPTIONS
READ_FAILED = 1
OTHERS = 2
The problem that BWSP is not developed in the future, what you can do is to change the standard... SAP does not recommend to do thatof course.
I hope I could help you!
Cheers,
Tibor -
Last date of the selected quarter
hi all - I have been struggling to figure out how to get the last date of selected quarter. for example, if the user has selected 2014 Q1 from the date hierarchy, I want to show 2014-03-31.
any idea how to accomplish this? thanks in advanceHi Sam,
There are several ways to do this in MDX.
One way is to use LastChild a few times. For example, if your hierarchy had Period, Week, and Day below Quarter, and you were sure the user had selected a Quarter (the MDX could check) try this assuming your date hierarchy is calle [Date].[Fiscal
Calendar]. [Date].[Fiscal Calendar].lastchild.lastchild.lastchild
The first lastchild will get the last Period in the Quarter, the second lastchild the last week in that Period and the third lastchild will get the last day of that week.
Another way, which will work for any level they selected would be something like; assuming the Day level is called [TheDate]. Tail(Descendants([Date].[Fiscal Calendar],[Date].[Fiscal Calendar].[TheDate]),1).item(0) The descendants
gets all the days in the selected period, the tail gets a set including just the last day, and Item(0) gets that particular day.
Of course, the MDX snippets above could be used in larger MDX expressions.
Hope that helps. It really is worthwhile to learn a little MDX. Remember, anything is possible in MDX if the cube has the data.
Richard -
Review period and Selection period in Enterprise Compensation Management
Dear all,
Anybody can explain about review period and selection period???
Theory says u2026
Review period
The period when manager can plan and submit recommendations through MSS
Selection period
The period which system retrieves the set of objects (Org units, positions and employees) for compensation on portal.
But I am bit confused with thisu2026 when this review will happen? In the beginning?
Say example
If itu2019s a merit increment and 01.01.2011-31.12.2011 is the valuation periodu2026 and we will give the increment in effective 01.01.2012 .Then when it be will the review period and when it will be the selection period?
Anybody can explain with examples plsu2026.
Thanks and Regards
RichardHi Richard,
You supplied the correct definitions, but your explanation is not correct.
The Review Period is that period of time the manager can access the system to enter the recommendation for a pay change. In your example it might be 12/15 to 12/31. Only during this period will the review be available for entry. The 1/1 effective date is set in the Item attributes.
The Selection Period indicates for which employees the manager can make recommendations. For example, if a person is transferred on December 20th in the above scenario - you would want the first manager to still create the recommendation and the individual not to appear for the new manager. Thus, you would put 12/15 as the beginning and ending date for the Selection period. Each manager would then see his/her direct reports as of that date in the recommendation area. If you put 1/1/ to 12/31 in this field, any manager of the individual during the year could see and make entries in the recommendation area for the employee.
Hope these examples help.
Paul -
Validation problem with the selected Month-Year and Days in the Month.
Hi,
I am unable to figure out the logic for the below senario.
There are two fields Period and Date
If Users sets the Period to FEB-11
and User has to select the Dates of the February Month only and if he selects any other month It should throw an error.
How could I restrict the user to not enter any other date from the selected period.
Please suggest.
Thanks,
KrishnaHi Gyan,
Thanks for the update.
I am just tring to copare the values
able to get the period value and unable to compare to the date format.
just look at the below code with the output of sop
OAMessageTextInputBean mtb =
(OAMessageTextInputBean)webBean.findIndexedChildRecursive("item1");
OAMessageDateFieldBean mtb1 =
(OAMessageDateFieldBean)webBean.findIndexedChildRecursive("item2");
String period = (String)mtb.getValue(pageContext);
System.out.println("Value of Period:::"+period); // FEB-11 is the out put
Date date = (Date)mtb1.getValue(pageContext);
System.out.println("Value of Period:::"+date); // 2011-02-09 is the output
// Converting the date to string using SimpleDateFormat
DateFormat df = new SimpleDateFormat("dd-MM-yyyy");
String date1 = df.format(date);
System.out.println("String Date::"+date1);
String date2 = date1.substring(3,5);
System.out.println("SubString::"+date2);
// 02 is the out put I am not able to Format the month in SimpleDateFormat("dd-MON-yyyy") to get the
// month as FEB is there any converter.
String date3 = date1.substring(8,10);
System.out.println("SubString2::"+date3);
//11 is the out put
if (period.equalsIgnoreCase(date2.concat(date3)) )
// after concatinating the format is 02-11 so its going to exception
System.out.println("Date in the same Period");
else {
throw new OAException ("Date Selected is out of range::");
}I am not able to Format the month in SimpleDateFormat("dd-MON-yyyy") to get the month as FEB is there any converter.
The logic is working fine but the month is not getting converted.
Thanks,
Krishna -
Document overview : my Purchase order - change selection period ?
Hi,
in ME21N, ME22N or ME23N transaction i use the Document overview, for the item 'my Purchase order' by default the selection period is determinated to 1 week, can i extended this period to 1 month (for example) ? if yes how can i do this ?
Thanks a lot.
CheersGo to Me23N and click on the Personal setting from header and on Basic settings tab
on Selection timeframe for my Docs make it 1 month by drop down and save
now you will see for 1 month document -
Customizing MSS reporting selection period dropdown list
We have diffrent ABAP programs that uses the PNP logical database and we want to customize the period selection dropdown list on the MSS reporting iview. In same scenarios we want to display only 'Today'. In these scenarios we use the report together with a variant.
When the user execute the report, the selection period on the variant is used and that is 100% correct. The problem is that the user change the selection period on the frontend (on the Iview) and this is not what is reflected on the output of the report, becasue the report uses a variant.
Therefore we want to customize the period selection dropdown list on the Iviewin the scenarios where a report uses a variant.
I know that we cannot customize the perido selction on the Iview, beacue we cannot set the properties on the Iview.
Is anybody familiar with how we can accomplish this.
Regards
Margariet
<< moved by moderator - check out the list of other forums on top of portal forum >>
http://forums.sdn.sap.com/thread.jspa?threadID=1239838&tstart=0
Edited by: Anja Engelhardt on Feb 9, 2012 11:42 AMHi Darren,
We do have a property in the iview for which you can set the period. You need to know the name of the property. Give us the iview name so that we can have a look.
Cheers,
Sathya -
How can I extend the budegt period?
I defined a budget in Define Budget form(Oracle Applications R11i) and its data in the screen as follow:
Name= mybudget
Status = Open
First Period= Feb-09
Last Period = Jan-10
Latest Open Year=2010
I entered a Budget journals already for this budget
I want to extend the budget period to Jun-10 to be able to enter budget journals in the new periods
Any way to achieve that?
Thank you in advanceHello.
Once you save the budget, you cannot change the first period.
To change the last budget period:
You can change the last period to a later period only if the period you are changing from corresponds to the last period of your fiscal year.
Octavio -
FSG - Need to determine the first periode value in year
Hi
can anyone help me please
i need to create a column or row in FSG with the first period balance value in years
for example of the template is:
parameter period is Mar-12
Amount
Balance of Jan-12 10,000
Balance of current period 12,000
thanks
Lim JohnyHi;
What is EBS version?
Please review:
How to Create FSG Report to show a Row Only if the Balance is Debit or Credit [ID 754162.1]
How to Create a Row Set, Column Set, or Content Set report [ID 108305.1]
FSG Functional Troubleshooting Guide [ID 136328.1]
Hope it helps
Regard
Helios
Maybe you are looking for
-
Can't sync music on Ipod after formatting
I recently formatted my computer and so, lost Itunes. I installed it all over again. No problem until then. I put my music and videos from my Ipod (Fifth generation, 30go) on my computer and then on my new Itunes. Doing this, I lost over 500 songs an
-
How do I get back my files from an erased hard drive? (disk utility)
Under the advice of another Mac user, I used the Disk Utility application to 'erase' and reformat my MacBook Pro to 'Mac OS Extended (Journaled)' so that I could copy files that were on my MB to my hard drive and it erased everything on my hard drive
-
Hi I have requirement to install Jinitiator 1.1.8.19 in 64bit machine. Is this version available in 64bit. regards.
-
can anybody answer this question
-
Different types of table nodes?
Ok this is probably a silly question but I have two different kind of of tables. The first looks like 3 columns the first one yellow and the second two are white. This one I build table lines on the table painter and when I add nodes under it I hav