End dated responsibility are visible once login as sysadmin
Dear Gurus,
There are some responsibilities are End-Dated for the user SYSADMIN.
But once i login as sysadmin user i can see all the responsibilities are present in the Navigatior responsibility tab.
It took a long time for login as sysadmin user.
Is this the reason because there a more number of responsibilities are atteched to SYSADMIN user?
I have checked the responsility most of them are end dated but they refelect in the responsility tab.
Please suggest me ...
Thanks
Hi,
Please review the following notes:
End Dates are Populated for All Responsibilities (Doc ID 743408.1)
End Dated Responsibility Still Appears when User Logs On (Doc ID 780392.1)
User Responsibility Assignment End Date Not Immediately Effective (Doc ID 1551779.1)
Unable To End-Date a Responsibility Assigned To The User (Doc ID 1348270.1)
Thanks &
Best regards,
Similar Messages
-
Oracle application r12 Shows End dated Responsibility
Hi,
I am using R12.1.2 Oracle E Business suit. I have couple of responsibilities with same name (Small letters and Caps Letter name). after disabling (End-Dated) All lower case responsibilities also i am able to see all these end-dated lower case Responsibilities via> System Administrator >profile>system
Is there any method to hide/delete these end dated responsibilities.
Thanks,
VishalHi,
Is there any method to hide/delete these end dated responsibilities.
i want to hide that end dated responsibility.Deleting responsibilities/User cannot be done as this would cause referential integrity issues.
There is no direct way to hide end dated responsibilities, but you may try forms personalization to achieve that.
By the way, what is the point of hiding responsibilities?
Thanks,
Hussein -
Unable to use Un-End dated Responsibility
Hi All,
Having a bit of a problem un-end dating responsibilities within existing user records.
Step1. Assign responsibility to a user
Step2. End date responsibility on user record
Step3.Delete end date from responsibility from user record
This is constantly causing problems with user access. We also run the Sync tables report, but this does not appear to give us any success, any tips would be greatly appreciated.
SimonHave a look at the following thread:
User Responsibility on User profile in Sys Admin
User Responsibility on User profile in Sys Admin -
Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
We are facing a new issue.
1. Removed the end-date against an assigned responsibility for an user in the users screen.
2. When the user logs in from the "http://<url>:<port>/OA_HTML/AppsLocalLogin.jsp" screen, the responsibility does not show up.
But, when the user logs in using the http://<url>:<port>/dev60cgi/f60cgi URL, he can see the responsibility in the LOV.
Any idea what could be the issue?
-AmrutCheck Note: 388018.1 - Unable to See a Responsibility in the Navigator After End Date Has Been Removed
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388018.1 -
Unable to view end dated supplier (Employees set up as supplier)
Hello All,
Recently we upgraded from ORacle R12.1.2 to R12.1.3, after this we are not able to query for an supplier which is end dated earlier. The end dated suppliers are actually employees set as suppliers for the sake of iExpense.
If anyone has encountered this error before kinldy let me know of how to handle this.
Thanks and Regards,
ShivaHi Shiva,
We currently have the same issue. It would be helpful if you can let us know how this issue was resolved at your end.
Thanks & Regards,
Supriya -
Hi,
We are using 11.5.9. We noticed, for one of the active employee, user account is end dated automatically. I checked the record histroy of it, it shows,
"Updated By : <shows this employee's manager user account>".
"System Logon: Unknown" and
"Terminal : Concurrent".
I checked the responsibilities owned by this employee's manager who have only self service responsibilities. There is neither concurrent program nor function related to sysadmin user define screen is attached.
This issue occured to only one employee. How it would have happened?
Thanks in advance.Hi;
Please review:
We want to disable 100+ users, can we simply update end_date in fnd_user. Or we need to update wf_user_roles etc.
disabling user in FND_USER
Automatically disable user accounts after specific number days Oracle Apps
Re: Automatically disable user accounts after specific number days Oracle Apps
which users should not be end dated
Re: which users should not be end dated ?
Setting specific timeline for user login in EBS
Re: Setting specific timeline for user login in EBS
To Find Users with end dated responsibilities
Re: SQL Query - To Find Users with end dated responsibilities
Regard
Helios -
Auto User Creation on Hire, and Auto User End Dating on Termination
Hi Everyone,
We are using HR and OTL in an environment with very high employee turn over. Currently we need to create a user and assign an OTL responsibility so that employee timecards approve in OTL. At the moment, we do it manually (ie HR ask the sysadmin to create a user and add the resp).
Does anyone have any suggestions on how we might automate this? Ie when an employee is created in HR, a user is created and the OTL responsibility is added. Additionally, how can we have the user and resp end-dated when the employee is terminated?Hi
Please see this note - Batch Creation Of User Accounts [ID 226738.1]
You can use User Hooks to automatically assign OTL responsibilities.
Srinivasa -
In an Multi Record Block last previous record should be end dated
Hi all,
can any one help me in this,.....
i a multi record block i need to end date the last previous record,..
Thanks
RajRaj,
My guess is that you would want the previous record end-dated even if the user uses a Hot-Key to save the record in addition to using the SAVE button. That being the case, I would add or alter the Pre-Insert trigger on the block to update the find the record that does not have an end-date and update the end_date to SYSDATE. This assumes that there will always only be one record that needs to be end dated. If there are more than one, each record will have the end_date updated. Using your data, you can accomplish this a couple of ways. The first would be to simply update the base table using a simple update statement in an Anonymous Block in the Pre-Insert trigger:
BEGIN
UPDATE verify_table
SET enddate = sysdate
WHERE enddate is null;
END;Second, you could loop through the block in the Form and update any records where the enddate is null.
BEGIN
GO_ITEM('MYBLOCK.FIRST_ITEM');
FIRST_RECORD;
WHILE :system.last_record = 'FALSE' LOOP
IF :myblock.enddate is null THEN
enddate := sysdate;
EXIT;
ELSE
NEXT_RECORD;
END IF;
END;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks! -
Weblogic portal admin - delegates book contents are visible to anonymous us
weblogic portal admin - delegates book contents are visible to anonymous users !!!
In the weblogic portal administration console, we have configured a desktop and under which there are some portlets and one delegates book (delegates book contains portlets which are visible to the logged in users only by configuring entitlements)
The desktop URL is something like : http://10.0.1.1:7010/TTDPortalWeb/appmanager/TTDPortal/desktop
accessing this URL shows the main page contents perfectly before and after login (ie. it only shows the services which are supposed to show to the logged in user)
but if somebody accesses the below url delibrately, all the contents are shown even without login.
http://10.0.1.1:7010/TTDPortalWeb
when i select a portlet inside the delegates book, I can see the Portlet publishing link URL as:
http://10.0.1.1:7010/TTDPortalWeb/bea/wlp/api/portlet/publish?context=/TTDPortalWeb/appmanager/TTDPortal/desktop&portlet=CompletionCertificatePortlet_1
but when I roll mouse over the service's link on the actuall page, I see url as http://10.0.1.1:7010/TTDPortalWeb/wlp.c?__c=7d6 (also when I click the service, I takes me to this URL)
When I roll mouse over the forgot password which is at the main desktop (not inside the delegates book) it shows the correct URL which is http://10.0.1.1:7010*/TTDPortalWeb/appmanager/TTDPortal/desktop*?_nfpb=true&_windowLabel=portlet_3_1_1&portlet_3_1_1_actionOverride=%2Fttd%2Fportal%2Fpageflow%2Fuser%2Flogin%2FforgotPassword
Any help would be highly appreciated
Thanks and Regards
Ushas SymonSolved the problem by editing the entitlements on the books under the Library section at the portal admin...
-
SQL Query - To Find Users with end dated responsibilities
Oracle Apps ver: 11.5.10.2
Oracle DB - 9i
How can i list users and the access assigned to them for a specific division irrespective of the responsibility being end dated at responsibility levelHi Sakshi,
Try out this query if it can help you !
SELECT a.user_name, a.description, c.responsibility_name, c.creation_date as ASSIGNED_DATE>FROM apps.fnd_user a,
>apps.fnd_user_resp_groups b,
>apps.fnd_responsibility_vl c
>WHERE a.user_id = b.user_id
>AND b.responsibility_id = c.responsibility_id
>AND a.creation_date < = '01-JUN-07'
ORDER BY a.user_name;Thanks,
Anchorage :) -
Oracle financials end user responsibility in implementation project
Could any body tell me the Oracle financials end user responsibility in implementation project
SO what is the variance in the responsibilities for Functional consultant and Key user in implementation or support project.
=========================================================================================
See in implementation project, the resource who is performing the implementation needs access to all the forms i.e. setup, transaction forms etc.
Also within an implementation project, there may be resources who are not associated with set, hence they responsibility will have only transactiion forms or inquiry forms.
=======================================================================================================
In Support project, the following may be valid users associated with the functions:
the Invoice entry folk who keys in the invoice needs access to Invoice form only.
Similarly The invoice inquiry folk who needs to inquire the invoice will need to have access to Invoice Inquiry form only.
Similarly a person who is incharge of the overall control within a support project will have access to all the forms, functions, menu etc.
=================================================================================
Hope this helps.
Thanks and Regards
Manish Jain. -
Hidden report items with toggle are visible in Excel when a report is exported to Excel.
Hi
I have 4 Bar charts and 4 text boxes in one report in SSRS Report . These charts are hidden based on parameters. I have one visible chart and one text box when report is rendered .
When report is exported to excel 4 charts are visible. Each Bar chart has one textbox in toggle box. If I set toggle to None all hidden charts will be invisible in excel file.
I used iif(Globals!RenderFormat.Name=" EXCEL",False,True)
but it does not work when the chart is toggled by a text box.<v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:6in;height:396pt;"
type="#_x0000_t75"></v:shape>Hi Katherine
Thank you for your quick response.
I am working with three versions .(SQL SERVER 2008, 2008 R2 and 2012)
I designed all reports in SQL Server 2008 and uploaded them in other versions.
For example, I have a chart that it is invisible when the report is initially run.
I want to hide this chart in excel when I export it to Excel format.
In SQL Server 2008: If the toggleitem of a chart sets to a text box the chart is visible in excel when it is a hidden item in the report .
I checked in PDF and word format it is fine and hidden items are not displayed.
There is this scenario for SQL Server 2008 R2 and SQL Server 2012. I tested Globals! RenderFormat in two versions but it does not
work. The main issue is toggleitem. If I remove toggleitem from hidden items they are invisible in three versions when they are exported to Excel. I am not sure if I design report in Sql Server 2008 R2 I can hide some
report items with toggle in Excel format or Not?
Thanks -
Ways to show only the non-end dated portofolio manager.
Hi All,
I have a fund raising application (Raiser's edge), and I have to show each donor along with his/her primary portfolio manager. Each donor could have more than one manager but there could be only two current manager (primary & secondary). If the portfolio manager is neither primary nor secondary, we end-date them. So I tried to create a formula to show only Current Primary Manager, but was unable to:
IF ( ISNULL({GfCnRelSol_1.GfCnRelSol_1_Date_To}) or
({GfCnRelSol_1.GfCnRelSol_1_Date_To} = ""))
and
({GfCnRelSol_1.GfCnRelSol_1_Solicitor_Type} = "Foundation Primary") then
{GfCnRelSol_1.GfCnRelSol_1_Name}
else
This formula will show each donor with their primary manager whether it is an old/end-dated or not.
I also set the Convert Database Null Value to Default
***The Date To is considered "String" data type as opposed to Date Data Type.I thought that is what you wanted it to do.
All that formula is doing is filtering records based on
{GfCnRelSol_1.GfCnRelSol_1_Solicitor_Type} = "Foundation Primary"
and
{GfCnRelSol_1.GfCnRelSol_1_Date_To} being blank
That means it will only find donors that that have an account manager listed as "Foundation Primary" AND that has no Date_To value.
If that is not what you are wanting just let me know.
Jason -
Hi All.
How to end/terminate and assignment with end dated entered by user Apps R12.1?
when i try to end or terminate and assignemnt the sysdate is begin registered for effective_end date.
any help is reaaly greatly appriciated
thanks and regards
SoniHi Soni,
What is the end date you want to enter as. Are you talking about 31-Dec-4712. If not, please change the sytem effective date (calendar icon on the oracle menu) to the date you want to terminate and follow the termination process.
Thanks,
Avinash -
Terminated employees assignment not being end dated
Dear Gurus,
I have terminated an employee and his status is shown as Ex -Employee but his assignment is not being end dated till the termination date. I dont know what is the problem? in fact is is even letting me open assignment form after the termination date where as in normal cases it does not even allows us to go to assignment form after the termination date.
Help Please
Muhammad Noman ShafiqueHi Muhammad,
There are 3 important dates on the Terminations form -
Actual Termination date(ATD)
Last Standard Process date (LSPD)
Final Process date(FD)
If all the above are the same, then you cannot navigate into the Assignment form, after the termination date. i.e. the assignment is end-dated as of the termination date.
If the LSPD or FD are later than the ATD, then you can still navigate into the assignment form as the assignment is still active with a termination status.
There is a special use-case, for the above scenario. Consider this -
You have terminated an employee as of 15-Apr-2012 (ATD). Now you can process the employee payroll only till 15-Apr-2012, if all the above dates are the same.
Now, if you want to process some elements like Termination-pay or Leave-salary, which you want to calculate at the month-end, then you can give the LSPD as 30-Apr-2012. And at the month-end you can process the payroll.
Say, you want to process an element called commission or Extra-pay for a terminated employee, 6 months after his termination, then the Final process date can be changed to the month you want to process the element(If you see closely, the FD is the only date which can be amended on the termination form).
So depending on your use-case, you need to enter the dates.
Hope that helps.
Thanks,
Vigneswar
Maybe you are looking for
-
dear all: phased a problem , if anyone know what i can do please let me know problem: i was working with a fh9 file while i was working i received an error mesage whilke i was trying to copy something , and well i was not able to copy it so i closed
-
My laptop crashed and I had to get a new hard drive. How do I get the music from my iPod back into iTunes Library?
-
Oracle CRS(10.2) installation fails - service OracleCSService in improper
Hello, I been trying to install Oracle RAC 10g R2, in a VmWare client machine with Windows 2003 SE, as you can see, the check commands run, showing all configuration is fine, except for the VIP part, installation passed smoothly, till the Configurati
-
Page navigation problem using template method pattern
Hi all, I've built a rather simple app implementing the template method design pattern. I've built a shared session bean which holds a hashmap of beans associated with pages I've visited. All of my JSPBeans extend from a common abstract class which c
-
It would seem as if this would be simple, but I'm not finding any documentation. I have a map of the US. Each U.S. state is a simple button. I'd like to change the button fill color (and potentially, the outline color) in AS3. I've created the button