End dated the Element link, redo the changes.

Hi,
I have end dated element links as of 1-JAN-2012, now I have to undo the changes.remove the end date. How can I do that?
Thanks

Set your effective date to a couple of days before the end date, e.g. 30-DEC-2011. Then query back the link in question, then click the 'Delete' button. Say 'Yes' to the next question, then when it gives you date-track options, choose 'Delete Next Change', and choose 'Save'. Be warned, it could take some time if it's a heavily-used element!
Clive

Similar Messages

  • How to Disable/End Date an Element Link/Element in HR 11.5.7(Fam.Pack G)

    We want to disable some element links that are no longer valid. These element links are assigned (element entries) to certain employees based on the eligibility criteria set (e.g. Organization/Job/Grade/etc). However we want to disable these elements from a specific date onward as they are no longer valid. I tried to end date either the element entry or the element link but I got the message "Field is protected against update".
    From help the only thing I found regarding deleting an element is to delete all element entries linked to that element link and then delete all element links linked to that element to be able to delete or end date the element.
    But what we need to do is only to disable the element links and not to delete them all together and lose any historical records related to these element entries.
    If anyone has any idea on how to deal with this issue will be highly appreciated.
    Thanking you in advance.
    Elena

    Hi again,
    I made a search regarding elements/links and managed to find an old document (2002) regarding links and following the suggestion there I managed to end date the element links in request.
    In order to end date the Element Link since it does not allow
    you to make any updates you have to try to DELETE it and then select END DATE instead of PURGE.
    Thank you!
    Best regards,
    Elena

  • Getting error when trying to end date the element links

    When i am trying to end date the element link and i am getting a error message as ORA-01403: no data found if i click on the details button the following message is displayed:
    ORA-01403: no data found
    FRM-40735: ON-DELETE trigger raised unhandled exception ORA-01403.
    If i click on Ok button it bringgs another popup message that reads as follows:
    An Unexpected Error- 1403 has occured.An alert has been sent to the system administrator.
    ORA-01403: no data found
    I am really not getting why my link is not end dating.
    Could anyone advice me on how i can end date my element links.
    NB:the date track i am using is 01-DEC-2009 and no prayroll or quick pay has been processed as of this date

    Pl see if enabling an Forms Runtime Diagnostics (FRD) trace can help identify the cause
    MOS Doc 373548.1 - How To Collect And Use Forms Trace (FRD) in Oracle Applications Release 12
    MOS Doc 167635.1 - How To Perform Forms Runtime Diagnostics (FRD) Tracing in Applications 11i
    HTH
    Srini

  • Cannot end date the element

    There was an element defined wrongly in the system as follows:
    the element is defined as final close while it was suppose to have been defined as Last Standard process. I have managed to end date its links as of 01-JAN-2010 now when i am trying to end date the element as of 01-jan-2010 it is giving me the follwoing error"
    APP-PAY-06213: Formula result rule use this input value
    Check you formula result rules for indirect results that feed this input value.
    I have checked the formula result rule there is no formula attached to this element.
    Kindly help me!

    Please run this query to find out which elements are using the element you want to end date as indirect results.
    Remove the indirect results and try end dating the element.
    SELECT  ET.ELEMENT_NAME,psp.PROCESSING_RULE, ff.FORMULA_NAME, pfr.RESULT_NAME,
    pfr.RESULT_RULE_TYPE, et1.ELEMENT_NAME et_to_end_date,iv.NAME,iv.UOM, et.REPORTING_NAME
    FROM
    PAY_STATUS_PROCESSING_RULES_F psp,
    PAY_FORMULA_RESULT_RULES_F pfr,
    ff_formulas_f ff,
    PAY_ELEMENT_TYPES_F ET,
    PAY_ELEMENT_TYPES_F ET1,
    PAY_INPUT_VALUES_F IV
    WHERE
    psp.FORMULA_ID=ff.FORMULA_ID
    AND pfr.STATUS_PROCESSING_RULE_ID=psp.STATUS_PROCESSING_RULE_ID
    AND et.ELEMENT_TYPE_ID=psp.ELEMENT_TYPE_ID
    AND et1.ELEMENT_TYPE_ID=pfr.ELEMENT_TYPE_ID
    AND iv.INPUT_VALUE_ID=pfr.INPUT_VALUE_ID
    AND pfr.RESULT_RULE_TYPE = 'I'
    AND ET1.ELEMENT_NAME = :element_to_end_dateHTH

  • Employee Termination after payperiod end dates and before end of the year

    I need a best possible senario at my current client one of the employees is going to be terminated *(resignation)on  Dec 29th 2010 and his last payroll for the year runs up to Dec 26th 2010 (12/13/2010-12/26/2010: Check Date 12/24/2010), and there will be a reminder of three more days because his termination on 12/29/2010. But the business is looking to not to carry his additional three working pay days for the next year and W2 and wanted to pay in regular check that will be 12/24/2010 as an additional payment.
    We dont do OCWB checks...can you please give us a best possible senario in SAP will be greatly appreciated

    Hi,
    A few things could be done here:
    1. Put the employee on unpaid leave for the extra three days and pay them out using a one time payment in the last pay period of the year.
    2. Terminate them at the end of the pay period and pay them out with a one time payment in the last pay period of the year.
    It really depends on a few factors.  You have to think about how end dating the employee on a different date them the actual termination date will effect other configuration/customization you my have and should the employee really get a year end tax form next year for those 3 days.
    thanks.
    JB

  • Element link problem!

    Hello Gurus, I need a bit of advice.
    In my organization, we have a single element link for basic salary. Now we have a requirement to cost the Basic Salary element as per 2 different assignment category. I tried the following steps
    1. Date tracked to 01Sep 2010
    2.Tried to create a new element link for Basic salary, but not able to bcoz the elemnt is already linked to all employees thru the existing element link.
    MSG : Element link is not mutually exclusive.
    3. I tried to delete the existing element link for Basic Salary, but I am not able to. MSG "APP PAY07134 You cannot delete links which have entries within the deletion period."
    The recommended action is delete the element entry after the session date.
    3. I try to delete the Basic Salary from element entries, but not able to do that, as the delete button does not get enabled for Basic salary.(It is enabled for the other elements).
    Pls advise how to proceed.
    Thanks
    George

    There are a lot steps involved with this one.
    1. End date salaries for all employees/ contingent workers with basic salary
    2. End date old element link
    3. Create new element link
    4. Upload salary again for all employees.

  • I have several news sites as my home page. Previously if i clicked a link...it would open a new tab at the righthand end of the row....now it opens in the middle of the row of tabs. Cannot find the setting to change back to righthand end of row

    runung xp pro sp3....i use news sites(7 of them) as my home page. If i click a link on a news page...I am used to it opening in a tab at the far right hand end of the row of tabs. Since f'fox 5 , the new tab is opening in the middle of the row.....Can i change a setting to send the newie back to the right hand end?

    see item #36 Open new tabs on far right, restore pre Fx3.6 behavior, set '''browser.tabs.insertRelatedAfterCurrent''' to '''false''' in about:config
    *http://dmcritchie.mvps.org/firefox/firefox-problems.htm#prefx4
    You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic
    *[http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
    '''More information on configuration variables''' available in
    [http://kb.mozillazine.org/About:config_entries about:config (entries)] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config (How to change)] -- Specialized list of only [http://dmcritchie.mvps.org/firefox/tabs_config.htm Tabs configuration] variables.

  • "Email link" option changes font to "Times New Roman" at end of the URL in Outlook

    When using the "Email link" option in Firefox, it then calls Outlook, then inserts the title of the webpage, as well as the URL. This is a handy feature that I have been using for years, but has always had an annoying bug.
    The URL in the body of the message conforms with Outlook's settings (font is Calibri 11 for me), but then Firefox also adds a space at the end of the URL, which is formatted in Times New Roman 12. I have gone through every template and setting Outlook and checked for TNR. It is nowhere to be found. This is something that Firefox is doing, and has been doing for many, many years (at least as far back as version 3.6, all the way to 17, which I'm running now.

    Seems obvious now, just added the css class to the body div.

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • Firefox 8 puts new tabs opened from links in another tab at the end of the tab list, NOT next to the tab it came from like in V3.6. I want it next to the tab it came from. How do I get it to do this?

    Question as stated, sums it up. When I click the mousewheel on a link in a tab I want a new tab open with that link and I want it next to the tab I clicked the link in just like Firefox V3.6 did. Firefox 8 is always opening the new tab at the end of the list and boy is this annoying!
    Please tell me how to fix this.

    type in the address bar '''about:config'''
    then press the button '''i'l be careful i promise'''
    then type in the bar '''browser.tabs.insertRelatedAfterCurrent'''
    then '''Right-click''' click on it, and select '''Toggle''', and you see changing the value from True to '''False'''.
    exit firefox and restart.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • API error: Element link does not exist for the duration of the entry

    I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
    While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
    ORA-20001: Element link does not exist for the duration of the entry
    Cause: The link has been purged or date effectively deleted.
    Action: Check the effective start and end dates on the link definitions for this element.
    I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
    The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
    Any idea?
    Message was edited by:
    briard

    Here are the parameters I use in my call.
    DECLARE
    L_EFFECTIVE_START_DATE DATE;
    L_EFFECTIVE_END_DATE DATE;
    L_ELEMENT_ENTRY_ID NUMBER;
    L_OBJECT_VERSION_NUMBER NUMBER;
    L_WARNING BOOLEAN;
    BEGIN
    APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
    P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
    P_BUSINESS_GROUP_ID => 1,
    P_ASSIGNMENT_ID => 122147
    P_ELEMENT_LINK_ID => 233,
    P_ENTRY_TYPE => 'E',
    P_INPUT_VALUE_ID1 => 313,
    P_ENTRY_VALUE1 => 'T',
    P_INPUT_VALUE_ID2 => 314,
    P_ENTRY_VALUE2 => '5',
    -- out params
    P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
    P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
    P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
    P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
    P_CREATE_WARNING => L_WARNING);
    END;
    François

  • I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
    If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

  • Changing the default bullets insertion location closer to the left end of the document

    hi friends
    i am new to office 2013 & i have a problem
    in office Word, in a documents when i click on Bullets, system insert it but the space between Bullets & left end of the document page is much for me.
    how can i configure Word application so that every time in insert a Bullet structure, it be located somehow more left so that less space from left end
    thanks in advance

    Hi John,
    You can make the change by selecting the "Define New MultiLevel
    list...", Or create a new list style by clicking "Define New List Style...".
    Then adjust the value for "Aligned at:" and "Text indent at:" option.
    More reference about bullets, numbers, and lists:
    http://office.microsoft.com/en-us/word-help/bullets-numbers-and-lists-RZ010216185.aspx?section=12
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    hi ethaun
    thank you very much for guide
    best regards

  • Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

    Thunderbird puts a new message at the end of the thread.
    Is there any way of changing this preference so that new messages are displayed at the top of the thread.
    This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

    No it is not possible. The newest message is attached to the message it is in reply to.
    The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

Maybe you are looking for