End of file on comms channel after install of 8.1.7 on RH7

Hi
Afetr discovering that no tech support is available with RH7.1 and 8.1.7 (NOT supported!!) we have downgraded to RH7.
When trying to create a database using svrmgrl, the thing just hangs after about 2 minutes saying :
ORA-03113: end-of-file on communication channel
Once this has happened you cannot use svrmgrl again until you reboot the box :(
Any ideas on where to look for this one?
Ta
GR

I encountered the same problem. I even ignored the messages and finished creating database.
But no matter what method I tried to connect to the database afterwards I got the same message.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by GR ([email protected]):
Hi
Afetr discovering that no tech support is available with RH7.1 and 8.1.7 (NOT supported!!) we have downgraded to RH7.
When trying to create a database using svrmgrl, the thing just hangs after about 2 minutes saying :
ORA-03113: end-of-file on communication channel
Once this has happened you cannot use svrmgrl again until you reboot the box :(
Any ideas on where to look for this one?
Ta
GR<HR></BLOCKQUOTE>
null

Similar Messages

HELP! ORA-03113 End of file on comm channel

Hi
I'm new to Oracle but old-timer in Linux.
I have just installed Oracle 8.1.7 on RedHat 7.0 successfully.
Unfortunately, I could not create a new database.
It's always prompt "ORA-03113 End of file on comm channel"
whenever i run sqlplus or svrmgrl command.
I have followed the instructions closely. Except that I did not
create the 4 mounting points. ie. /u0 /u1 /u2 /u3 Because I do
not know how to use it.
Someone pls enlighten me. Is it the reason that it's failed?
Pls help me to solve this ORA-03113 problem. Thanks!
Samuel

Hi
I'm new to Oracle but old-timer in Linux.
I have just installed Oracle 8.1.7 on RedHat 7.0 successfully.
Unfortunately, I could not create a new database.
It's always prompt "ORA-03113 End of file on comm channel"
whenever i run sqlplus or svrmgrl command.
I have followed the instructions closely. Except that I did not
create the 4 mounting points. ie. /u0 /u1 /u2 /u3 Because I do
not know how to use it.
Someone pls enlighten me. Is it the reason that it's failed?
Pls help me to solve this ORA-03113 problem. Thanks!
Samuel

ORA-03113: end-of-file on comm channel

Oracle8i 8.1.7 on Redhat 7 (i686) with jdk and jre 118: I've been trying to create the starter database using dbassist. It failed with ORA-03114. So I decided to create a service named oralin.waytoofar.com and It seems to start OK with lsnrctl START. When I test this service with netasst it almost always fails with the same error messages. Sometimes I can start sqlplus with sys/oracle as sysdba, (after a reboot) but usually I get a ORA-03113. Any ideas?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Thomas Finneran ([email protected]):
Oracle8i 8.1.7 on Redhat 7 (i686) with jdk and jre 118: I've been trying to create the starter database using dbassist. It failed with ORA-03114. So I decided to create a service named oralin.waytoofar.com and It seems to start OK with lsnrctl START. When I test this service with netasst it almost always fails with the same error messages. Sometimes I can start sqlplus with sys/oracle as sysdba, (after a reboot) but usually I get a ORA-03113. Any ideas? <HR></BLOCKQUOTE>
Okay, NOW I found the other linux postings after doing a lot of digging. What a complete waste of my time! Three days of fiddling around with installations and searching for the Linux bug postings. I'm amazed at how long it took me to find these postings on the world's leading database vendor's website. It would be nice to search for things by error code, or even "Linux." Why aren't these SHOWSTOPPER BUGS and their workarounds more prominently posted?

Java Stored Proc - ORA-03113: end-of-file on communication channel

Help with error please.
Running java stored procedure and getting
end-of-file error. This error occurs after successful connection established.
Simple function returns a java.util.String that is a coded version of the DATE parameter. Procedure does not use a connection object.
Error message and description list below.
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two task, software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
I am currently looking into the trace file as suggested.
Thanks

Check parameters in intisid.ora:
java_pool_size > 50 Mbytes
java_soft_sessionspace_limit = 4 MBytes
max_java_sessionspace_size = 2 Gbytes
See note 103855.1, 105472.1 in Metalink.
null

8.1.7 Post-installation end-of-file on communication channel error

Hi everyone,
I got a problem with a new install of Oracle 8.1.7. First, I had 8.0.5 installed on Linux which contained a relative huge database. I wanted to upgrade to 8.1.7 and so, I installed it (with no default database). After I applied the patch (the setup_stubs.sh script) I tried to migrate the existing database with the odma (oracle data migration assistant). However, during the process odma gave me an error "An error occured while starting up the database..." I checked the log that came with the error message and it occured when it was trying to open the database i.e. the instance started, but when it came for mounting the database it displayed: ORA-03113: end-of-file on communication channel
I attempted to do the migration manually. So I tried to start the database using svrmgrl:
startup restrict pfile=$ORACLE_HOME/dbs/initSID.ora
and, of course, I get the instance started, but when it comes to mount the db, it gave me:
ORA-03113: end-of-file on communication channel
Anybody knows why I get this error on startup?
I checked my environment variables, my PATH and also made sure that svrmgrl was the version for 8.1.7. Everythings seem fine.
Any ideas?
Anything would be very much appreciated.
Thanks
joss

Oracle unable to spawn job slave processes should not prevent the instance from starting - these are not critical system processes and the instance can function without them (as it can when the job queue is set to zero processes).
The o/s failure message also does not make much sense.. overlapped I/O is Microsoft Windows term for async I/O. This can be used at file I/O level, but is also supported for any other file handle like sockets - thus applicable at the network layer too.
I'm a bit confused to how a PFILE versus a SPFILE startup can cause this. If that is the case, then surely there are something different ito init instance settings that triggers this error?
Can you copy and paste the actual SQL*Plus session (as already requested). Show us startup command (and params) used in SQL*Plus and the resulting messages (and errors displayed) in response to the startup.

Help need for "ORA-03113: end-of-file on communication channel" on startup

Hi everyone,
After install the oracle 8.1.7 on Solaris 2.7, I can not start the oracle server, below is the problem I got,
$ ./svrmgrl
: Oracle Server Manager Release 3.1.7.0.0 - Production
: Copyright (c) 1997, 1999, Oracle Corporation. All Rights
: Reserved.
: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
: With the Partitioning option
: JServer Release 8.1.7.0.0 - Production
: SVRMGR> connect internal
: Password: oracle
: Connected.
: SVRMGR> startup
: ORA-03113: end-of-file on communication channel
Can someone tell me what is wrong with my
oracle server? Thanks a lot.
null

Hi,
the answer is simple. check first if TWO_TASK parameter is set to value from Ur tnsnames.ora. usually this environment variable must not be set for servers, only for client side. that means try 'unset TWO_TASK' and then should work.
best regards,
nicky

ORA-03113: end-of-file on communication channel, Please help

hello Seniors,
i have strange situation, facing it for the first time.
i m/s detail form and i am entering data. i successfully saved few records.
i completed entering one more record and for a reason i left it unsaved.
after lets say may be a minute or so, i got back to work and then tried to save the unsaved record
displayed on screen. when i pressed save button i got error;
ORA-03113: end-of-file on communication channel
leaving the form as is with this error displayed, i notice that i can very well use the db at server level
by running other sqls, meaning other resources are functioning. even i tried to open the same application again
leaving the erroneous form as is, and tried to enter in another form , it communicated well and saved without any errors.
also there is one more errro along with this, when i query; says "Unable to perform query"
ORA-01041: internal error. hostdef extension doesn't exist
and when exit the current form it quits the entire application and kills that particular session,
but the db is still up and running with no errors.
The Tnsping <hostname> is responding.
i want to know while entring on a form, is there any time-out limit between the entry and saving point?
or any other solution please help. vm thankful.
my db
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jul 25 09:31:46 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
form;
Forms [32 Bit] Version 6.0.8.25.2 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
Oracle Toolkit Version 6.0.8.25.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.25.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Edited by: user10967485 on Jul 25, 2009 12:47 AM
Edited by: user10967485 on Jul 25, 2009 12:52 AM

i was testing entering into different forms of my application.
what i notice that this problem persist with just one form i.e. my purchase order header-details form.
whats happening is, it allows just the first or rather 1 record (incase if are in a query mode and select create record),
saving the next or IInd record returns this error. God knows why..?
can you please suggest any debugging technique to catch the theif?
i have WNFI, POSt-FORM-COMMIT, KEY-COMMIT, PRE-COMMIT, PRE-FORM at form level
at heade block i have ;
PRE-INSERT,UPDATE,DELETE, PRE-RECORD,POST-QUERY, KEY-ENTQRY, ON-POPULTE-DET
at detail blcok i have;
PRE-INSERT,UPDATE,PRE-RECORD,POST-QUERY,WHEN-REMOVE-RECORD.
sqlnet.ora, i have at 4 different dir;
C:\orant\NET80\ADMIN & C:\orant\NET80\ADMIN\SAMPLE AND
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN & C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\SAMPLE
I am not so good with Dba interface, so please suggest me which particular file should refer and
where & what exactly should i look for..? as the file contains a comrehensive entries.
thankyou once again.
on displaying error from Help i get this;
INSERT INTO PURCHASE_ORDER_DETAIL) VALUES ) RETURNING ROWID,POD_COMP_CODE,POD_DATE,POD_POH_CODE,POD_POH_NO,POD_REMARKS,POD_CR_UID,POD_CR_DT,POD_UPD_UID,POD_UPD_DT,POD_PROD_CODE,POD_UOM,POD_QTY,POD_RATE,POD_CURR_CODE,POD_FX_RATE,POD_fc_AMOUNT,POD_LC_AMOUNT INTO :1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18
ORA-03113: end of on communication channel.

8i - End-of-File on Communication Channel

Hi,
I managed the install of 8i on Red Hat v6 after experiencing
many of the install difficulties mentioned elsewhere in the
forum. Downloading the patch resolved most of them.
However, I have a number of major process to run to load my
database. This load worked OK in 8.0.5, however near the end
(when else?) of running these process on 8i I got the "ORA-03113
end-of-file on communication channel" error message. This is a
hard error condition - I get it whenever I try and start the
database.
I have the trace files in case they are useful - they are
meaningless to me.
For now I am returning to the more tried-and-true territory of
8.0.5.
null

Stuart Housden (guest) wrote:
: Hi,
: I managed the install of 8i on Red Hat v6 after experiencing
: many of the install difficulties mentioned elsewhere in the
: forum. Downloading the patch resolved most of them.
: However, I have a number of major process to run to load my
: database. This load worked OK in 8.0.5, however near the end
: (when else?) of running these process on 8i I got the
"ORA-03113
: end-of-file on communication channel" error message. This is a
: hard error condition - I get it whenever I try and start the
: database.
: I have the trace files in case they are useful - they are
: meaningless to me.
: For now I am returning to the more tried-and-true territory of
: 8.0.5.
Please see my answer titled "SOLVED! Re: Migrate from 8.0.5 to
8.1.5".
Maybe you have to rebuild the control files and migrate the 8.0
datafiles to 8.1 version.
Regards.
Vittorio
null

Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel

Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?

Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2    db_id          VARCHAR2(10)
3 , xml_message    XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8    PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id=("144283","9085802")]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation                              | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                       |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                          |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   2 |   VIEW                                 | VW_SQ_1                      |     1 |    25 |    32   (4)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                         |                              |     1 |    47 |         |             |       |       |
|* 4 |     HASH JOIN SEMI                     |                              |     1 |    47 |    32   (4)| 00:00:01 |       |       |
|   5 |      PARTITION SYSTEM SINGLE           |                              |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 6 |       TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 7 |        INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
|   8 |      COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE        | 8168 | 16336 |    29   (0)| 00:00:01 |       |       |
|* 9 |   TABLE ACCESS BY USER ROWID           | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
              SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
   6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
   7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
   9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
   - Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id="144283" or id="9085802"]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation                                | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                         |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                            |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   2 |   VIEW                                   | VW_SQ_1                      |     2 |    50 |     8   (0)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                           |                              |     2 |   180 |         |             |       |       |
|   4 |     CONCATENATION                        |                              |       |       |         |             |       |       |
|   5 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
|   6 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
|   7 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 8 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 9 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 10 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 11 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 12 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
| 13 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
| 14 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
| 15 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 16 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 17 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 18 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 19 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 20 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 21 |   TABLE ACCESS BY USER ROWID             | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
   9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
              (LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
              LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2    xmlcast(
3      xmlquery('/main/id' passing XML_MESSAGE returning content)
4      as varchar2(10)
5    )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4          XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5          AS VARCHAR2(10)
6        )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation                           | Name               | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
|   0 | SELECT STATEMENT                    |                    |     2 |   236 |     2   (0)| 00:00:01 |       |       |
|   1 | INLIST ITERATOR                    |                    |       |       |            |       | |       |
|   2 |   TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE     |     2 |   236 |     2   (0)| 00:00:01 |     1 |     1 |
|* 3 |    INDEX RANGE SCAN                 | INT_PART_TABLE_IX1 |     2 |       |     1   (0)| 00:00:01 |       |       |
Predicate Information (identified by operation id):
   3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
              varchar2(10)   )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
              ) AS varchar2(10)   )='9085802')

ORA-03113: end-of-file on communication channel while running utlrp.sql

Hi All,
I am getting ORA-03113: end-of-file on communication channel while running utlrp.sql.
Actually I ran utlrp.sql before in my test database and terminated the session in middle after that when ever I am running utlrp.sql i am getting the above error.
how to resolve the issue.
Kiran

Hi,
Check as follows;
select owner,object_name,object_type from dba_objects where object_name like
'UTL%'The objects should only belong to SYS, if they do belong do some other user (example HR, etc). Drop objects belong to other users (not sys).
Then connect as sys as sysdba and rerun the script utlrp.sql.
You can also review Oracle Metalink Document: ORA-03113 Error When Executing Utlrp.sql: Doc ID: Note:413922.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:5496440446026841247::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,413922.1,1,1,1,helvetica
Adith

EAL extract fails with ORA-03113 end-of-file on communication channel error

Hi,
We are trying to run an EAL (v11.1.1.4) extract from an HFM (v9.3.1.4) environment onto Oracle database. We are able to run the extract successfully for few hundred records, but when the records exceeds 10 million we get the error below
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13579: Cannot execute statement for insert
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03113: end-of-file on communication channel;Process ID: 16323;Session ID: 15 Serial number: 8288; (code=3113)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13580: Cannot rollback
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03114: not connected to ORACLE; (code=3114)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] WARN : HR#13674: Data move region job failed: HR#00000: some operations failed, see details in the log file; 81877900 cell(s) processed in 70348 second(s)
We checked on the DB and the Oracle session that was doing the insert was open even after the extract failed with the above error.
Any idea what could be causing this??
Thanks
Ramya Suresh

Hi,
I was able to fix this issue.
From the trace file identified the related objects and validated them.
More details can be found in below MOS note.
[ID 421711.1]--Understanding and Diagnosing ORA-00600 [17069] Errors
Thanks for all the inputs...

ORA-03113: end-of-file on communication channel

Hi
While I startup Oracle database, i get the following error. What could be the issue and how to resolve this.
SQL> startup
ORACLE instance started.
Total System Global Area 864333824 bytes
Fixed Size 2231368 bytes
Variable Size 704644024 bytes
Database Buffers 150994944 bytes
Redo Buffers 6463488 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6507
Session ID: 580 Serial number: 5
Below is the content from alert log and trace log
*#alert_orcl.log#*
Bad header found during crash/instance recovery
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080f01b (file 2, block 61467)
Data in bad block:
type: 255 format: 2 rdba: 0x0000a2ff
last change scn: 0x0000.0080019f seq: 0x0 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x4ff
consistency value in tail: 0x643e0346
check value in block header: 0x0
Read datafile mirror 'ASM5' (file 2, block 61467) found same corrupt data (no logical check)
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080019f (file 2, block 415)
Read datafile mirror 'ASM4' (file 2, block 415) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 61467) found same corrupt data (no logical check)
Hex dump of (file 2, block 34539) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008086eb (file 2, block 34539)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008086eb seq: 0x0 flg: 0x00
Read datafile mirror 'ASM3' (file 2, block 415) found same corrupt data (no logical check)
spare1: 0xbb spare2: 0xe1 spare3: 0x4ff
consistency value in tail: 0x02c20304
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008086eb (file 2, block 34539)
Read datafile mirror 'ASM2' (file 2, block 34539) found same corrupt data (no logical check)
Hex dump of (file 2, block 420) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x008001a4 (file 2, block 420)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 2 rdba: 0x0000a206
last change scn: 0xe1f3.008001a4 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x474f4c20
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008001a4 (file 2, block 420)
Read datafile mirror 'ASM4' (file 2, block 420) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 34539) found same corrupt data (no logical check)
Read datafile mirror 'ASM3' (file 2, block 420) found same corrupt data (no logical check)
Hex dump of (file 1, block 3097) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 2 format: 6 rdba: 0x0000a202
last change scn: 0x0000.00400c19 seq: 0x0 flg: 0x00
spare1: 0xdf spare2: 0xe2 spare3: 0x4ff
consistency value in tail: 0x09c10280
check value in block header: 0x0
Hex dump of (file 2, block 34765) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc block checksum disabled
Corrupt block relative dba: 0x008087cd (file 2, block 34765)
Reading datafile '+DATA/orcl/datafile/system.256.762570243' for corruption at rdba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe27b.008087cd seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
Read datafile mirror 'ASM5' (file 1, block 3097) found same corrupt data (no logical check)
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087cd (file 2, block 34765)
Read datafile mirror 'ASM3' (file 2, block 34765) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 1, block 3097) found same corrupt data (no logical check)
Hex dump of (file 3, block 272) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Reading datafile '+DATA/orcl/datafile/undotbs1.258.762570243' for corruption at rdba: 0x00c00110 (file 3, block 272)
Read datafile mirror 'ASM1' (file 3, block 272) found same corrupt data (logically corrupt)
Read datafile mirror 'ASM5' (file 2, block 34765) found same corrupt data (no logical check)
Hex dump of (file 2, block 34771) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008087d3 (file 2, block 34771)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008087d3 seq: 0x0 flg: 0x00
spare1: 0x3a spare2: 0xe3 spare3: 0x4ff
consistency value in tail: 0x00045055
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087d3 (file 2, block 34771)
Read datafile mirror 'ASM3' (file 2, block 34771) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 3, block 272) found same corrupt data (logically corrupt)
RECOVERY OF THREAD 1 STUCK AT BLOCK 272 OF FILE 3
Read datafile mirror 'ASM5' (file 2, block 34771) found same corrupt data (no logical check)
Wed Jun 27 05:49:55 2012
Hex dump of (file 2, block 65353) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff49 (file 2, block 65353)
Bad header found during buffer corrupt after write
Data in bad block:
type: 1 format: 6 rdba: 0x0000a206
last change scn: 0xe2bf.0080ff49 seq: 0x74 flg: 0x00
spare1: 0xf5 spare2: 0xe0 spare3: 0x602
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff49 (file 2, block 65353) found different data
Hex dump of (file 2, block 65356) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff4c (file 2, block 65356)
Bad header found during buffer corrupt after write
Data in bad block:
type: 2 format: 6 rdba: 0x0000a206
last change scn: 0xe2a7.0080ff4c seq: 0x74 flg: 0x00
spare1: 0xbf spare2: 0xe2 spare3: 0x602
consistency value in tail: 0x00000059
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff4c (file 2, block 65356) found different data
Hex dump of (file 2, block 66114) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292893):
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9, _wordcopy_bwd_dest_aligned()+185] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293021):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 2]
Wed Jun 27 05:49:59 2012
Dumping diagnostic data in directory=[cdmp_20120627054959], requested by (instance=1, osid=6831 (P000)), summary=[incident=293021].
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293022):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293022/orcl_p000_6831_i293022.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292894):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20120627055004], requested by (instance=1, osid=6713 (DBW0)), summary=[incident=292893].
Wed Jun 27 05:50:08 2012
PMON (ospid: 6679): terminating the instance due to error 471
Wed Jun 27 05:50:08 2012
ORA-1092 : opitsk aborting process
Wed Jun 27 05:50:08 2012
License high water mark = 4
Instance terminated by PMON, pid = 6679
USER (ospid: 6860): terminating the instance
Instance terminated by USER, pid = 6860
*#trace logs#*
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
kcra_dump_redo_internal: skipped for critical process
kcbz_try_block_recovery <1, 8454722>: tries=0 max=5 cur=1340797795 last=0
BH (0x7bbe0fc8) file#: 2 rdba: 0x00810242 (2/66114) class: 1 ba: 0x7b8f4000
set: 12 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,0
dbwrid: 0 obj: 68150 objn: -1 tsn: 1 afn: 2 hint: f
hash: [0x912f45b0,0x912f45b0] lru-req: [0x7bbdfdb0,0x90deff60]
lru-flags: on_auxiliary_list
obj-flags: object_write_list
ckptq: [0x7bbfc4c8,0x7bbea0a8] fileq: [NULL] objq: [0x8b251480,0x8b251480] objaq: [0x8b251450,0x7bbe0e88]
st: INST_RCV md: NULL rsop: 0x90d110e0
flags: buffer_dirty being_written block_written_once recovery_resilver
recovery_read_complete
cr pin refcnt: 0 sh pin refcnt: 0
kcra_dump_redo_internal: skipped for critical process
Incident 292893 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident 292894 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []

Did you actually read the alert-log ??
The problem is clear in there. Your datafiles are corrupted!!!
While the database is trying to correct these, a lot of ORA-00600 and ORA-07445's are generated.
Consult Oracle Support to get this resolved
Thanks
FJFranken

End-of-file on communication channel

Hello,
I'm using Oracle9i Release 9.2.0.3.0
My success SQL:
SQL> SELECT livro_isbn FROM tab_livros w where w.livro_cont.extract('/Livro/Livro_Titulo/text()').getStringVal() LIKE 'Geografia SNEM Prof.';
LIVRO_ISBN
8508081707
My unsuccess SQL:
SQL> select livro_isbn from tab_livros, table (xmlsequence extract(livro_cont,'//*'))) t where extra
ctValue(value(t),'/*/text()') like 'Geografia SNEM';
select livro_isbn from tab_livros, table (xmlsequence(extract(livro_cont,'//*'))) t where extractVal
ERROR at line 1:
ORA-03113: end-of-file on communication channel
In time: Livro = Book in portuguese.
How can I find a term in any node from my XML?
Thank you

If the data is that confidential then the best way to prcoceed with this would be for your authorised support contact open up an iTAR with Oracle support. This will provide a non-public way for you to submit the document. If post the iTar number I can then take a look.
If you prefer you can also mail it to my hotmail account ([email protected]). If you choose to post it here I can use moderator privlidge to delete the post after i see it.
Remember that Oracle does not guarantee any level of support in these forums. In theory they are meant to be self-help forums, where users help each other. However since XML DB is new, and I am the product manager, I do try to make some effort to provide a some level of support, even though my management does not necessarily regard this as one of my primarly responsibilities..

ORA-03113: end-of-file on communication channel ERROR

After applying Database patch 3095277 to my 9.2.0.1.0 installation
in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
I've even tried creating a new test database but the result is the same.
The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
ERROR at line 1:
ORA-03114: not connected to ORACLE
I would be grateful of any pointers as to how to resolve this problem.
Regards
Gary.

Chris, Thanks for the suggestion,
I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
This is only a test database so there's no great loss if
I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
Regards
Gary.
Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
Wed Sep 17 16:25:14 2003
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Instance name: test01
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 2556, image: ORACLE.EXE
*** 2003-09-17 16:25:14.046
*** SESSION ID:(7.17) 2003-09-17 16:25:14.031
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** 2003-09-17 16:25:14.281
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
Current SQL statement for this session:
select 1
from resource_view
where any_path = '/xdbconfig.xml'
----- PL/SQL Call Stack -----
object line object
handle number name
6A4FA348 6 package body XDB.DBMS_REGXDB
6A504D88 1 anonymous block
6A576AB8 639 package body SYS.DBMS_REGISTRY
6A1DBB6C 1 anonymous block

ORA Error : end-of-file on communication channel

Hello everyone !
Every time i excuted a simple select query of type
select X from Y where (z=1 or z=2 or z=3) i got a oracle error "ORA-03113: end-of-file on communication channel ".
Can anybody tell me why this error occurs, also sometime i got the result also again some time i end up with this error.
Is there anything wrong with my pro*c application or i need to do some configuration for the same.
thanx in advance.

Hiii ....
We don't have any firwall between the clients and the server it is directly connected through the gateway.
onece i received the error : "end-of-file on communication channel ", its not restoring back the connection and all queryies made after that is giving the same error untill i stop and rerun the pro*c application.
oracle ver: 9.2.0.4 os: linux 8.0

End of file on comms channel after install of 8.1.7 on RH7

Similar Messages

Maybe you are looking for