"END OF FILE REACHED"?????

IT WILL NOT ALLOW ME TO CREATE INSTRUMENTS- NONE OF MY FILES ARE WORKING -IM GETTING NO SOUND WHATSOEVER--I AM COMPLETELY LOST AND GOING CRAZY WITHOUT MY MUSIC-- CAN SOMEONE HELP ME OUT HERE PLEASE
[email protected]

Hi,
1. Inspect your audio hardware and drivers pane. Make sure you have enough audio tracks in the "max no of audio tracks" box.
2. Go to your Environment (F8)
Look at the layer entitled "Audio". What is in there? Only 4 audio objects? More? Does this make sense to you?
3.Make a new autoload. go to your audio layer (from step 2) and make new audio objects until you have enough for your needs. (hint=you can copy and paste existing audio objects). Make SURE you rename them to the appropirate channel they are representing. For each NEW audio object, go the the parameter pane (the info at the left side) and where it says "device" make sure it is the correct audio driver, and also the correct channel. IE if you create a copy of channel 1, you need to change the parameters to channel 2, rename it, etc...
It is a bit of a pain, so you can also use the "Setup Assistant". Consult your manual on how to invoke this in Logic Express.
Cheers

Similar Messages

Logical end-of-file reached during read operation

Hi,
Something strange happened to my Logic a couple of days ago - all of a sudden. When I start Logic up it gives me the following error message:
*Error reading/writing file “com.apple.logic.pro.cs”: Logical end-of-file reached during read operation.*
I have re-installed Logic, as well as updated it (8.0.2), I have repaired disk permissions in Disk Utility, and it still keeps popping up. I cannot get on with my projects and I have deadlines!
I found an IT support site, according to that I don't have enough space on my HD. However, I do... I'm confused, and desperately need help.
Thank you so much, I'm looking forward to hearing from somebody.
Agnes

I am not opening any files, just launching Logic.
I know. And when you launch Logic, it loads its preferences files - and it seems this is failing - most likely due to file corruption. So delete the file, as I said, and Logic should load fine.

U201Ccom.apple.garageband.cs\U201D - Logical end of file reached...

Hello,
I'm getting two errors. Hopefully someone can help with one or both.
1) U201Ccom.apple.garageband.cs\U201D - Logical end-of-file reached during read operation.
From other posts, I've tried to go into Library -> Prefs -> but, there's no file there to delete. I also have reinstalled Garageband, with the same issue popping up.
2) "Garageband unexpectedly quit." - Not sure what's going on here. Anytime I close the program, it has a 2 second lock-up, and then the yellow triangle with the exclamation point pops up with that message?
I do not have any 3rd party apps or add-on's.
Thanks in advance.
Cheers,
Sean

I've tried to go into Library -> Prefs -> but, there's no file there to delete.
http://www.bulletsandbones.com/GB/Tutorials.html#deleteprefs

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Error "logical end of file reached during read operation"

I am trying to burn a dvd of a wedding I did, and this is the error I am getting. After 5 hours of it trying to burn when I click cancel this it says " logical end of file reached during read operation". Does anyone know what this means, and how I can fix it? I am anxious to get this wedding finished and out to the customer. Any help would be greatly appreciated.

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

EXS 24 Logical end-of-file reached during read operation Result code = -39

EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try and fix I extracted two kits with the same name but oddly they are slightly different sizes and have different creation dates, one 2004 the other 2007 hmmm (one goes in Garage band for remix tools the other gets placed in 02 Electronic Drum kits) from the install disks using Pacifist hoping to replace corrupted files. NG. I also reinstalled all the samples from the LP8 install disk, still NG. Anybody have a solution. THanks.

To further clarify, the samples are all located in the folder Garage band/.../.../.../Sampler Files/Treated Percussion Sets/Perc-DnB+Triphop. They are used in the EXS24 Trip Hop Remix kit.exs. The 3 samples that seem to be causing the error are, YT2BGLRHTX02_3ue.aif, YT2BGLRHTX03_3ue.aif, YT2BGLRHTX04_3ue.aif. The kit is useless and my song is screwed up now that the kit will not load. Any ideas for a fix out there ?

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

What mean "logical end-of-file reached" messaage ? (screen attached)

I see that when loading project. Is all ok after i press OK but what is that means ?

Not seeing a picture... are there audio files associated with this project?
Logical-end-of-file-reached usually refers to a corrupt audio file where the data header file end does not match the actual file length. In other words, the audio file it truncated or the file header describing the file is corrupt.
It could also be an audio file has been marked "read only" but that is less likely.
Are you sure all of your audio files are working correctly.

Can't save=Error -39 Logical End Of File Reached

Hi whenever I try to re-save a .jpg file, I get the "Error -39 Logical End Of File Reached."
I have tryed everything I can think of: Copy/Pasting; Importing, etc. with no success. Any help would be greatly appreciated!
Thanks.

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

Opening mp3 file in KM Content w/ Windows media player end of file reached

Hello all, when I am in KM content, I click on an mp3 file and I get end of file reached w/Windows media player. If I select the mp3 file and say "Save target as" and download it to my pc I can open it just fine in windows media player. Also opening the file in km content with Real Audio Player, I get a login prompt to the portal. When I click cancel the file plays in real audio. If I enter my login credentials in the real audio prompt the file won't play. Any ideas anyone?
thanks in advance
-- Steve

I am getting the same problem. I usd YouTube downloader (YTD) to download videos to Music Folder and Then YTD converts them from mp4 Video to mp3 Audio and then adds the audio to the WMP then when I go to play them theres a few with the blue? with
the same error but most the rest play fine I cant figure it out but if you do , please let me know and viceversa thanks

I really need help asap please..i have deadlines.."the end of file reached"

im currently running logic pro 7 academic on my g5--"the end of file reached" pop up occured (i think it was error code 43) and it said something about preferences i accidently hit the save button and i guess it saved the preferences(since then it has not popped up again)--i cannot hear anything from any of my files--all i am able to is basically look at the arrange window with 4 audio tracks and tracks from my keyboard---when i try to create audio instruments a pop up says "no more tracks available"--ive reloaded both of the logic discs and still am unable to get anything to work

OK, that's quite a lot in one go...and you have deadlines..let's see if we can clear things up?
You say you cannot hear anything...Have you ever had output coming out of Logic or is this your first try? If you can't hear anything, how on earth are you recording?
(I take it the "end of file" message shows up while recording?)
Are you using an audio interface or running straight out of the G5's internal audio card?
I've never had that "end of file" message but I suspect it can have something to do with the maximum recording time.
You set it under the Audio menue/Set Audio Record Path (Apple/A)
Now, to the Tracks:
Have you ever run the Set-Up Assistant (Logic Pro menue/Preferences/Logic Set-Up Assistant)? If not, I recommend you do. Here you can set the framework for your Audio Environment, How many tracks, busses etc.
Sorry if this is too basic for you, i'ts hard to tell how deep in to the application you are.
Good Luck,
Erik

Help!! Unable to launch Outlook Express - Error says 'end of file reached'

I double clicked on my icon to launch my email and got this message. I had Outlook Express 5.02 Tried rebooting twice. Backed up 5.02 on simple drive, then downloaded OE 5.06. Getting the same message... Unable to launch, end of file reached. anyone have any idea what is going on?? everything was fine yesterday!!! ps.. I am totally clueless with computers.. so need very specific (you are talking to a dummy) help here. PLEASE!!
Thanks!!!
imac Mac OS 9.0.x

Hi, tsam -
Welcome to Apple's Discussions.
That error is often returned when one or more of OE's databases gets too full.
Try compacting the databases in OE. This function is a built-in one, and can be done before the program actually loads. To do that, with OE not running hold down the Option key while opening OE.
• If you're opening OE directly, hold Option down while double-clicking OE's icon.
• If you're opening OE via the Mail icon in IE's toolbar, hold down Option while clicking that icon.
You'll receive a splash message asking if you want to compact the databases - click OK. Once that is done, you can get rid of the old database files (they'll have been renamed to indicate that they are the old ones).
OE keeps those files in its account (identity) folder(s). If you're not familiar with where those are -
• Current versions of OE keep them here - (hard drive ) >> Documents >> Microsoft User Data >> Identities >> Main Identity.
• Older versions of OE kept those in the Identities folder inside the program's folder.
"Main Identity" is the original default account (identity = account); if you've created additional accounts, there will be a separate folder for each in the Identities folder.
It would also be advisable to increase the Preferred memory allocation for OE. Adding 20 or 30 thousand to the original amount is not excessive - more is better.
Article #18278 - Assigning More Memory to an Application
• Whenever you replace or update a program, you must redo any changes made to its memory allocation amounts - the changes are not carried over to a new or replacement version.
Also, when you update OE or IE, particularly if you have both the old version and the new version on the drive at the same time, reset the default choices for those in the Internet control panel.

Entourage error 'could not open that feature end of file reached

When opening Entourage I received the error 'Could not open that feature. End of file reached' I tried Utility and rebuild. when attempting to rebuild a pane came up stating 'preparing to rebuild 0 of 0' and the pane has been stuck there for 8 hours. Every other office product works though. any ideas?

Contact Microsoft for support. That's not an Apple product.

Before reaching the high unit, 'End of file reached' error pops up.

Following is the <distributed-scheme> of my cache server.
<distributed-scheme>
<scheme-name>dom-dist</scheme-name>
<service-name>DOM-CACHE</service-name>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-name>dom-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>LocalSizeLimited-dom</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<eviction-policy>LFU</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
*<high-units>8192</high-units>*
<unit-factor>1048576</unit-factor>
<lh-file-manager>
<directory>/home/coherence/cachedata</directory>
<file-name>{cache-name}.store</file-name>
</lh-file-manager>
</external-scheme>
</back-scheme>
</overflow-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<local-scheme>
<scheme-name>LocalSizeLimited-dom</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>350</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1048576</unit-factor>
</local-scheme>
</distributed-scheme>
+I could see the file {cache-name}.store is saved but before reaching the high unit (8192) following error pops up and then the node shutsdown.+
Error:
2009-07-28 08:41:42.253/52233.963 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=2):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)2009-07-28 08:41:42.254/52267.134 Oracle Coherence GE 3.6.1.0 <D5> (thread=Cluster, member=1): Member 2 joined Service DOM-CACHE with senior member 3
2009-07-28 08:41:50.228/52275.108 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=1):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)
Edited by: online247 on Jul 19, 2011 3:07 PM

Hi Online247,
Despite LH has been deprecated and overflow-scheme is not used by many people, using disk based overflow as shown at the URL below could be useful for what you are trying to achieve:
http://hi.baidu.com/chenjf79/blog/item/42be1a2adf6d059c033bf691.html
Hope it helps.
-Cris

MAXDB backup failed with error: end of file reached -917

Hi I am performing a complete data backup for a database which is about 230 GB.
Previously it had run successfully for many days, but since yesterday, I began to receive such error:
Error: end of file reached(-917)
The backup stopped itself after running for 1 hour, and from backup history I just saw above error message.
I also had a look at the logs, and found below, could someone help me look into this issue?
Appreciate your kind help in advance!
2008-11-25 22:08:09      0xBE4 ERR 52012 SAVE     error occured, basis_err 5750
2008-11-25 22:08:09      0xBE4 ERR     3 Backup   Data backup failed
2008-11-25 22:08:09      0xBE4 ERR     1 Backup    +   Backupmedium #1 (F:\Dbbackup\QAS_data_01) end of file reached
2008-11-25 22:08:09      0xBE4 ERR     6 KernelCo +   Backup error occured, Error code 5750 "write_task_crash"
2008-11-25 04:00:27     0x16A0     52024 SAVE     30462712 pages -> "F:\DBbackup\QAS_DATA"
2008-11-25 04:00:28     0x1BE4     19626 IO       Async I/O thread stopped, 'F:\DBbackup\QAS_DATA'
2008-11-25 04:00:28     0x1FC4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0001'
2008-11-25 04:00:28     0x1688     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0002'
2008-11-25 04:00:28     0x15D4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0003'
2008-11-25 04:00:28      0xAEC     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0004'
2008-11-25 04:00:28     0x179C     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0005'
2008-11-25 04:00:28      0xDD4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0006'
2008-11-25 04:00:28     0x1AE8     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0007'
2008-11-25 04:00:28     0x176C     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0008'
2008-11-25 04:00:28     0x11B8     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0009'
2008-11-25 04:00:28     0x1B4C     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0010'
2008-11-25 04:00:28     0x1F60     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0011'
2008-11-25 04:00:35      0xB8C     52012 SAVE     ready
2008-11-25 04:00:35      0xB8C     19651 CONNECT Connection released, T113
Thanks,
vivian

Hello Shaun,
Thank you so much for your reply. But I've checked that my F drive still have more than 480GB free space, so the space should not be the problem.
And I've just run the backup once again, this time it keeps running for 2 hours, and then failed again with the same error.
Is there other possible reasons of this error?
Thanks a lot,
Vivian

End of file reached unexpectedly

When I try to save PDF files created from an online journal, I receive the message: End of File was Reached Unexpectedly. I have tried saving the files to different locations, but get the same message. This happens with several files and I have been unable to find a way to remedy the problem. Any help anyone can provide is appreciated.
Thanks!

Great. I'm glad it worked. Others have said you have to clean the cache in Chrome (too much trouble for me)
MdelC
Date: Mon, 6 Jul 2009 23:17:44 -0600
From: [email protected]
To: [email protected]
Subject: End of file reached unexpectedly
Thank you! I was using Google Chrome - opened it in Explorer and problem solved.
>

"END OF FILE REACHED"?????

Similar Messages

Maybe you are looking for