End of flux reached error or similar (translation from french)
Hi!
trying to build a DVD with encore CS3 I get the following error message while exporting : end of flux reached, in French "Fin de flux atteinte"
and that is all.
My project contains 3 time lines, which are, 2 video time lines and one audio with still picture.
When I try the project in Encore, everything works fine.
I run Windows XP pro and have plenty of space.
Any help welcome
Thanks
Edgar
"Fin de flux atteinte" probably translates to "End of stream has been reached".
Two earlier threads which may offer some clues:
"End of stream has been reached"
Encore DVD Error Message - "End of Stream has been reached"
Similar Messages
-
Before reaching the high unit, 'End of file reached' error pops up.
Following is the <distributed-scheme> of my cache server.
<distributed-scheme>
<scheme-name>dom-dist</scheme-name>
<service-name>DOM-CACHE</service-name>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-name>dom-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>LocalSizeLimited-dom</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<eviction-policy>LFU</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
*<high-units>8192</high-units>*
<unit-factor>1048576</unit-factor>
<lh-file-manager>
<directory>/home/coherence/cachedata</directory>
<file-name>{cache-name}.store</file-name>
</lh-file-manager>
</external-scheme>
</back-scheme>
</overflow-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<local-scheme>
<scheme-name>LocalSizeLimited-dom</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>350</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1048576</unit-factor>
</local-scheme>
</distributed-scheme>
+I could see the file {cache-name}.store is saved but before reaching the high unit (8192) following error pops up and then the node shutsdown.+
Error:
2009-07-28 08:41:42.253/52233.963 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=2):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)2009-07-28 08:41:42.254/52267.134 Oracle Coherence GE 3.6.1.0 <D5> (thread=Cluster, member=1): Member 2 joined Service DOM-CACHE with senior member 3
2009-07-28 08:41:50.228/52275.108 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=1):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)
Edited by: online247 on Jul 19, 2011 3:07 PMHi Online247,
Despite LH has been deprecated and overflow-scheme is not used by many people, using disk based overflow as shown at the URL below could be useful for what you are trying to achieve:
http://hi.baidu.com/chenjf79/blog/item/42be1a2adf6d059c033bf691.html
Hope it helps.
-Cris -
"end-of-body reached" Error when consuming web service from 10GR1
Hi all,
Im consuming a number of web services, all of which work fine apart from one which returns the error:
29266. 00000 - "end-of-body reached"
*Cause: The end of the HTTP response body was reached.
*Action: If the end of the HTTP response is reached prematurely, check if
the HTTP response terminates prematurely. Otherwise, end the
HTTP response.
I don't understand why this is happening and would really appreciate some help. I have checked the invoke procedure and there is a ' utl_http.end_response(http_resp);' call which online searching suggests can be a cause of the problem (if not used). The procedure which calls the service is:
function Events_Insert(id varchar2, pwd varchar2) return clob as
req opf_portal.pkg_call_web_services.request;
resp opf_portal.pkg_call_web_services.response;
aEventRecord varchar2(4000);
begin
req := opf_portal.pkg_call_web_services.new_request('Events_Insert', 'xmlns="<removed>');
aEventRecord:='<Options>
<EventOptionRecord>
<Comments>None</Comments>
<Quantity>1</Quantity>
<OptionID>53</OptionID>
</EventOptionRecord>
<EventOptionRecord>
<Comments>None</Comments>
<Quantity>1</Quantity>
<OptionID>53</OptionID>
</EventOptionRecord>
</Options>
<Badges>
<EventBadgeRecord>
<Company>Oracle</Company>
<JobTitle>Consultant</JobTitle>
<Name>GregCox</Name>
<EventBadgeRecord>
</Badges>
<SpecialRequirements>
<EventSpecialRequirementRecord>
<Notes>bob</Notes>
<Pvkey>110606</Pvkey>
<RequirementCode>VEG</RequirementCode>
</EventSpecialRequirementRecord>
</SpecialRequirements>
<Pvkey>110606</Pvkey>
<DelegateType>DELEGATE</DelegateType>
<EventID>524938</EventID>';
opf_portal.pkg_call_web_services.add_parameter(req, 'userid', 'xsd:string', id);
opf_portal.pkg_call_web_services.add_parameter(req, 'password', 'xsd:string', pwd);
opf_portal.pkg_call_web_services.add_parameter(req, 'aEventRecord', 'xsd:complexType', aEventRecord);
resp := opf_portal.pkg_call_web_services.invoke(req, '<removed>', '<removed>');
return resp.doc.getstringval();
end;Incase anybody else encounters this problem, it was my XML that was invalid:
<EventBadgeRecord>
<Company>Oracle</Company>
<JobTitle>Consultant</JobTitle>
<Name>GregCox</Name>
<EventBadgeRecord>
was missing '/' in closing tag -
End of File reached error message when running report
I am running this report in two different places. On my own machine it seems to run fine however when I run it for a client on their server I get a message saying end of file reached and the report won't come up. Any suggestions?
Hi Jeff,
In what context are you running the report? Are you talking about refreshing the data?
Is this in crystalreports.com or the CR designer or some custom built application?
This forum is specifically for the crystalreports.com, Information OnDemand, and Applications OnDemand web applications so this might be the wrong place for your question. You might want to try the Crystal Reports Design or one of the Crystal Reports SDK forums instead.
Cheers,
Steve -
Coherence 3.5
We are getting following exception -
Caused by: com.tangosol.io.lh.LHIOException: /local/home/beuser/cachestore/lh03861950282677193497~, Primary file, Reading, Group 25253, Frame 25253: End of file reached. at com.tangosol.io.lh.LHSubs.ReadFrame(LHSubs.java:2173) at com.tangosol.io.lh.LHSubs.GetPrimaryFrame(LHSubs.java:1583) at com.tangosol.io.lh.LHSubs.SetupKeyId(LHSubs.java:997) at com.tangosol.io.lh.LHSubs.FindKeyId(LHSubs.java:915) at com.tangosol.io.lh.JLHFile.updateRecord(JLHFile.java:433) at com.tangosol.io.lh.JLHFile.writeRecord(JLHFile.java:616) at com.tangosol.io.lh.LHBinaryStore.store(LHBinaryStore.java:128) at com.tangosol.net.cache.SerializationMap.putAll(SerializationMap.java:201) at com.tangosol.net.cache.OverflowMap.putOne(OverflowMap.java:3086) at com.tangosol.net.cache.OverflowMap.processFrontEvent(OverflowMap.java:2592) at com.tangosol.net.cache.OverflowMap.processEvent(OverflowMap.java:2448) at com.tangosol.net.cache.OverflowMap.prepareStatus(OverflowMap.java:2191) at com.tangosol.net.cache.OverflowMap.processDeferredEvents(OverflowMap.java:2763) at com.tangosol.net.cache.OverflowMap.evict(OverflowMap.java:3121) at com.tangosol.net.cache.OverflowMap.size(OverflowMap.java:390) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onSizeRequest(DistributedCache.CDB:24) ... 6 more
Any pointers resolving this will be appreciated.
Thanks.Here is the cache config -
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>RECORD</cache-name>
<scheme-name>example-distributed</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="record.cache.size.limit">98566144</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>COUNTERS</cache-name>
<scheme-name>example-no-expiry</scheme-name>
<init-params>
<init-param>
<param-name>cache-unit-type</param-name>
<param-value system-property="counters.cache.unit.type">FIXED</param-value>
</init-param>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="counters.cache.size.limit">100</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>RECORDKEYLIST</cache-name>
<scheme-name>example-distributed-with-backup</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="recordkeylist.cache.size.limit">25165824</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>RECORDITEM</cache-name>
<scheme-name>example-distributed-with-backup</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="recorditem.cache.size.limit">25165824</param-value>
</init-param>
</init-params>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<!--Distributed caching scheme.-->
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<thread-count>12</thread-count>
<backup-count>0</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>example-no-expiry</scheme-name>
<service-name>DistributedCache-no-expiry</service-name>
<thread-count>12</thread-count>
<backup-count>0</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow-no-expiry</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow-no-expiry</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>example-distributed-with-backup</scheme-name>
<service-name>DistributedCache-with-backup</service-name>
<thread-count>12</thread-count>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow-with-backup</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow-with-backup</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<!--
Backing map scheme definition used by all the caches that require
size limitation and/or expiry eviction policies.
-->
<local-scheme>
<scheme-name>example-backing-map</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>{cache-unit-type BINARY}</unit-calculator>
<high-units>{cache-size-limit 10}</high-units>
<expiry-delay>2h</expiry-delay>
<flush-delay>5m</flush-delay>
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<local-scheme>
<scheme-name>example-backing-map-no-expiry</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<expiry-delay>0</expiry-delay> <!--A value of zero implies no expiry. -->
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<local-scheme>
<scheme-name>example-backing-map-with-delay</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>{cache-unit-type BINARY}</unit-calculator>
<high-units>{cache-size-limit 10}</high-units>
<expiry-delay>24h</expiry-delay>
<flush-delay>5m</flush-delay>
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<!--
Overflow caching scheme with example eviction local cache in the
front-tier and the example LH-based cache in the back-tier.
-->
<overflow-scheme>
<scheme-name>example-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<overflow-scheme>
<scheme-name>example-overflow-no-expiry</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map-no-expiry</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<overflow-scheme>
<scheme-name>example-overflow-with-backup</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map-with-delay</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<!--External caching scheme using LH.-->
<external-scheme>
<scheme-name>example-lh</scheme-name>
<lh-file-manager>
<directory>/local/home/beuser/cachestore</directory>
</lh-file-manager>
</external-scheme>
</caching-schemes>
</cache-config> -
NQUDMLExec throws end of file reached error
Hi,
I have tried to execute the below command in windows command line .
[code] nQUDMLExec -U user -P pass -I test.cfg -B test.rpd -O C:\test.rpd[/code]
My test.cfg contains some db credentials as repositary variable.
it throws the below error always:
---------------ERROR(s)---------------
[nQSError: 28002] Near Line 12, Near <{>: End of file has been reached.
Please note that the test.cfg contains 12 lines totally. the error is reported in the last line always.
Any thoughts on this?
Thanks,
Pandeeswaran28002 Near Line @1%d, Near <@2%ls>: End of file has been reached.
Cause. The singly or doubly quoted string does not have a matching quote.
Response. Add single or double quote at the end. -
I've made the operation several rtimes withoiut any success
From the Mail menu bar, select
Window ▹ Connection Doctor
Look for the unwanted SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
If there's more than one unwanted account, repeat. -
Help with "The end of file was reached" error message in Outlook 2011
Hello, I am having an issue with Outlook 2011 that after 24 hours or so I am getting a “The end of file was reached” error message code -17895.
Right after this error I get a disconnected from Exchange server and even after re opening the client it stays like this for about 5 minutes then restores. Has anyone else seen this error? I am able to reproduce this on multiple machines with multiple Exchange
2010 mailbox accounts.Same situation here:
Outlook 2011 for Mac using Office 365, 3 users have reported the End of File Reached error when trying to send email.
I have logged a ticket with Microsoft support and they have followed up with the following directions.
1.
Repair Disc Permissions On A Mac
o
1
Log in to your computer with the administrative account. Open the hard drive, go into the "Applications" folder and then open the "Utilities" folder. Now launch the Disc Utility application.
o
2
Select your main hard drive. You'll probably see two options--one is the manufacturer's name of the disc and the other name is what you've called it. Choose the name of your hard drive.
o
3
Click on "Verify Disc Permissions" and the computer will perform a diagnostic test. After a few minutes, the problems with disk permissions will be reported in the Disc Utility window.
Click on "Repair Disc Permissions" to fix them.
o
4
Insert your Mac OS X installation disk and restart your computer. Hold down the "C" key on your keyboard to boot from the disk rather than your computer's hard drive. Cancel the OS
installation and open Disc Utility.
o
5
Click on "Verify" to have Disc Utility check your computer's hardware. Notice that this option is only available when the program is run from the CD. You can only test the hardware
of a computer that isn't running the program locally.
o
6
Use Disc Utility to try and repair any hardware errors that it detects. Usually fixing the permissions will be enough to maintain your computer. If you still experience frequent lockups
and crashes, then you should try repairing it with this method.
Tips & Warnings
If you use your computer for high-performance work, such as software compiling or video editing, then you may want to check the permissions weekly. Most computer users will only need
to fix permissions after noticing problems with applications or the operating system.
If the computer's performance does not improve after repairing permissions, then you'll have to troubleshoot for other issues. You may want to purchase more RAM for your computer to
help speed it up.
Permissions repairs will not correct problems caused by applications that did not use Apple's installer. Try deleting all files associated with the application and then reinstalling
it.
Avoid repairing the permissions after you've booted the computer from the OS X CD. It won't cause problems to your drive, but the version of "Disc Utility" on the CD may not be updated
to address permission changes that are required by certain software updates.
Secondly, the information for repairing an Outlook 2011 database is as follows:
http://support.microsoft.com/kb/2360509 -
U201Ccom.apple.garageband.cs\U201D - Logical end of file reached...
Hello,
I'm getting two errors. Hopefully someone can help with one or both.
1) U201Ccom.apple.garageband.cs\U201D - Logical end-of-file reached during read operation.
From other posts, I've tried to go into Library -> Prefs -> but, there's no file there to delete. I also have reinstalled Garageband, with the same issue popping up.
2) "Garageband unexpectedly quit." - Not sure what's going on here. Anytime I close the program, it has a 2 second lock-up, and then the yellow triangle with the exclamation point pops up with that message?
I do not have any 3rd party apps or add-on's.
Thanks in advance.
Cheers,
SeanI've tried to go into Library -> Prefs -> but, there's no file there to delete.
http://www.bulletsandbones.com/GB/Tutorials.html#deleteprefs -
End of communication channel error
While working with our application developed in VB, In some times when I use describe command in sql * plus, giving "end of communication channel error" and getting disconnected from the database. Select and other DML commands are working well.
Any suggestions please...
Thanks in advance....
UMAMAHESWARA REDDYCheck the alert log and with your network people for any errors.
-
Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank youYou can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large). -
Error "logical end of file reached during read operation"
I am trying to burn a dvd of a wedding I did, and this is the error I am getting. After 5 hours of it trying to burn when I click cancel this it says " logical end of file reached during read operation". Does anyone know what this means, and how I can fix it? I am anxious to get this wedding finished and out to the customer. Any help would be greatly appreciated.
How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick -
Error: Logical end-of-file reached during read operation. Result Code = -39
Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this) -
Can't save=Error -39 Logical End Of File Reached
Hi whenever I try to re-save a .jpg file, I get the "Error -39 Logical End Of File Reached."
I have tryed everything I can think of: Copy/Pasting; Importing, etc. with no success. Any help would be greatly appreciated!
Thanks.DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this) -
Help!! Unable to launch Outlook Express - Error says 'end of file reached'
I double clicked on my icon to launch my email and got this message. I had Outlook Express 5.02 Tried rebooting twice. Backed up 5.02 on simple drive, then downloaded OE 5.06. Getting the same message... Unable to launch, end of file reached. anyone have any idea what is going on?? everything was fine yesterday!!! ps.. I am totally clueless with computers.. so need very specific (you are talking to a dummy) help here. PLEASE!!
Thanks!!!
imac Mac OS 9.0.xHi, tsam -
Welcome to Apple's Discussions.
That error is often returned when one or more of OE's databases gets too full.
Try compacting the databases in OE. This function is a built-in one, and can be done before the program actually loads. To do that, with OE not running hold down the Option key while opening OE.
• If you're opening OE directly, hold Option down while double-clicking OE's icon.
• If you're opening OE via the Mail icon in IE's toolbar, hold down Option while clicking that icon.
You'll receive a splash message asking if you want to compact the databases - click OK. Once that is done, you can get rid of the old database files (they'll have been renamed to indicate that they are the old ones).
OE keeps those files in its account (identity) folder(s). If you're not familiar with where those are -
• Current versions of OE keep them here - (hard drive ) >> Documents >> Microsoft User Data >> Identities >> Main Identity.
• Older versions of OE kept those in the Identities folder inside the program's folder.
"Main Identity" is the original default account (identity = account); if you've created additional accounts, there will be a separate folder for each in the Identities folder.
It would also be advisable to increase the Preferred memory allocation for OE. Adding 20 or 30 thousand to the original amount is not excessive - more is better.
Article #18278 - Assigning More Memory to an Application
• Whenever you replace or update a program, you must redo any changes made to its memory allocation amounts - the changes are not carried over to a new or replacement version.
Also, when you update OE or IE, particularly if you have both the old version and the new version on the drive at the same time, reset the default choices for those in the Internet control panel.
Maybe you are looking for
-
Problem opening Form based PDF via Safari browser with Adobe Reader 9.3 on MAC
Hi, I'm mentioning below the problem that we are facing when we open a form based PDF created using a licensed version of Adobe Livecycle Designer ES (Version 8.2.1.4029.1.523496) on a MAC machine through a Safari Browser. We tested this PDF form on
-
Hi, I have exported and imported two schemas to a different server. Now when a user fires a select query it takes more time than before. When I saw the execution plan for some of 'select' queries,I found that the queries are using wrong index.This is
-
Toshiba L855-S5309 getting Error Code 0xc0000185
where you able to figure it out, i am currently having the same issue...
-
hi dera i have a problem whit itunes is not opening. whil i am trying to open it nothing happens. i also removed sc info files still i have the same problem i any one know to how plz..........
-
Error opening certain applications
I keep getting this error when trying to open a game after i have reformated recently. i have play this game prior to the format but now i cant for some odd reason. http://farm3.static.flickr.com/2045/233574904422d8748fc9b.jpg