End of Last Slide In Module

When the last slide of my module exits right before it fades out it plays the audio from the first slide in my module. This weird and I can not figure out what is causing it. Its this a bug?

Yes, that is a new feature.
Might want to hit F1 and read what is new in 7.1 and 7.2.

Similar Messages

  • Detect end of last slide with JavaScript or JQuery (HTML5)

    Is there any way to detect when the last slide has completed playing, using JavaScript or JQuery?
    I am publishing as HTML5, if that matters.

    Is there any way to detect when the last slide has completed playing, using JavaScript or JQuery?
    I am publishing as HTML5, if that matters.

  • How do you set the End Action on last slide of slideshow

    Encore DVD CS3.
    I must be the village idiot. I have setup a slideshow with manual advance. I cannot find a way to set the end action for the last slide. When I click on the last slide in the slideshow timeline there is no option that I can find for end action. When I preview the slideshow the last slide goes to black. I set the manual advance for all slides. There is several mentions of end action but no info on how to do it.
    Appreciate advice. Very frustrating.
    Clif
    BTW Why are there no reference books for Encore CS3? It seems very strange. It has been out for a while but NO books.

    Thank you for your help. I did what you said but the last slide still goes to black. The last slide also ignores the "manual Advance" and goes to black.
    I highlighted the slideshow timeline in the project window and set end action on the properties panel on the right to the slideshow itself. But the last slide quickly goes to black. Each slide except the last one has a box in the upper right corner indicating a cross dissolve transition. I set the slide duration to "manual advance" for the whole slideshow. I feel like an idiot but nothing seems to change the end action of the slideshow or the last slide. Always cuts to black and stops.
    Clif

  • MOV exported from Keynote - last slide disappears, audio continues playing

    I have a series of three mov files that were created in & exported from Keynote. They are audio & slide shows that are to autoplay on a website. Two of the files function as expected once embedded in the website, one does not; the last slide drops out (displaying a white screen) while the audio continues for approximately 30 seconds until the mov file ends. To add confusion to the issue ALL the files play as expected using Safari (on Win & Mac). Using Firefox on Mac delivers the "broken" results. Using ANY browser on Windows yields the broken result.
    Any suggestions from anyone as to what could be causing this? A link to the website I'm talking about is below. The problem file is on index2.html

    Hi,
    Since I am trying to do a number of things with Keynote, I read these discussions looking for opportunities and pitfalls.
    I read your message, and saw your outcome as an issue. Since I've yet to add the soundtrack to my current project, I needed to know more about the outcome before I proceeded, in order to adjust accordingly.
    I took my project, and added a song as the soundtrack. I played the slideshow, and the soundtrack played along, across the slides as it should. I then began to record the slideshow, but the soundtrack came playing through the speakers and was being picked up by the microphones, so I offed the speakers, donned my headphones, and re-began the recording. The soundtrack was playing (in the headphones), and I was narrating across many slides.
    I played the recorded slideshow, and all was present - soundtrack and recorded narration.
    I exported to Quicktime, sending the output to a new folder so that it could easily be found, along with anything else that might be generated. Upon completion, there was only one movie file in the folder. I opened and played it in Quicktime. It was perfect - slides looked good, narration was there, and the soundtrack was playing in the background.
    This outcome appears to be your objective, so I'm not sure what I did differently than you, but from this experience, it works as should be expected.
    Good luck.

  • Audio on last slide after quiz questions not playing

    Captivate v5.5
    I have a project with a question pool and a series of random questions
    The random question slides are without audio.
    After finishing the question pool the project closes with the final slide which does have some audio - which runs fine when I test the slide.
    However when I test the whole project (F12) the audio on the last slide does not play.
    The audio on the slides prior to the random question slides plays without any problem.
    Any ideas please?
    Noel

    Anjaneai,
    Thanks for the suggestion. But changing the question setting to infinite attempts will just allow the user to retry each question over and over until they get it correct. I want to give them one chance to answer each question for the entire quiz. Then, if they don't pass, they can try the entire quiz again.
    I ended up finding a resolution, though. Based on one of the suggestions from this blog, I just shortened my slide time for each question to .5 sec (it was originally 3 sec). That seemed to do the trick!
    http://blog.icslearninggroup.com/2011/12/adobe-captivate-quirks.html
    Kristin

  • "Last slide viewed" hyperlink in Flash export

    Just trying out using Keynote as a change from Microsoft PPT, particularly for the Flash export feature (as well as the lovely design features of course).
    I am going to get around the lack of a Play Audio "Action Setting" by having the audio segment on a separate, self-contained slide at the end of a document. On this self-contained slide I have put a "back" button hyperlinked to "Last slide viewed". However upon export to Flash, this function doesn't work, and hangs the entire presentation.
    Can anyone confirm if this is a known bug?

    I wouldn't call it a bug, more like something Apple just didn't implement. I mean, I have to wonder how hard it would have been to write a flash file that itself (not Keynote) tracks where the viewer is and remembers their last "slide"
    Personally, I think the flash export on Keynote should NOT be one of its selling points. If you need a serious flash movie, it's best to just use flash.

  • Branching from end of quiz slide

    I'm trying to branch from the end of quiz slide.
    The last quiz question will either send users to pass
    certificate for printing or Sorry, try again slide. When user
    prints certificate the published exe file doesn't know where to go
    next and goes to a blank screen. On the end of quiz slide, is there
    a way to add an exit to the exe standalone publish mode?
    Charles

    Got it. Forgot Quiz Prefs - pass goes to certificate, fail
    goes to sorry slide....

  • How to get last slide to stay on screen?

    How do I get the text on my last slide to stay on screen
    indefinitely? I've got my project preferences set to not fade out
    on last slide, but the screen goes blank when I get to the end of
    my timeline. Any ideas? Do I have to set an invisible click box
    somewhere on screen so that the screen doesn't fade away?
    Thanks in advance.

    Welcome to our community, rhall01
    More than likely, the text is probably in the form of a Text
    Caption. If you examine the properties of the caption, it is
    probably set to Fade in and out. So changing from Fade in and out
    to Fade in only should do the trick.
    Other than that, a Click Box object should work too.
    Cheers... Rick

  • How can I make last slide "hold" after music is over

    I am doing a slide show for our pastor. I have adjusted the slide show to fit the music, but would like if to stay on the last slide instead of going back to the organizer window...any help?

    Hello bbcard1!
    I do not believe there is option to "hold" an image for a few extra ticks at the end of a slideshow by using iPhoto. You can accomplish this by using iMovie but that does require a learning curve.
    What I have done and is relatively simple, depending on the type of transitions you are applying, was to add the last image a couple extra times in the slide show. In my instance this worked rather well...
    Good luck, Rick

  • Active clickboxes on last slide

    Hi guys,
    Does anyone know how to keep multiple clickboxes active indefinitely on the last slide?
    I have 4 clickboxes at the very end of my project, with each directing the end user to related resources / popup email to a contact person. I'd "pause project until user clicks" for all 4 clickboxes. This slide runs for 6 secs.
    However, if I go on and click one of these clickboxes and, say, read a related outgoing PDF and THEN come back again to this last slide to click on the other 3 clickboxes, the project would have finished, stopped and these 3 wouldn't be active anymore.
    Any tricks to keep them active?
    Thanks a lot in anticipation...

    Hi there
    See if the link below helps with that.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Slideshow: How can I stop on the last slide?

    How can I get my slideshow to stop on the last slide? I set the slide to stop as the end action, but it goes to a black screen.
    Anyone know how I can do this?

    Slideshows slides are timed by default.
    If you want the last slide to freeze, set it to Manual Advance in Slide properties. Then it will hold the last slide until the user hits the Next/Previous buttons (if they figure that out on their own, that is...you might want to post an instruction of some kind on the slide).

  • How to make  the last slide stay on the screen ?

    Hi,I need to make the last slide of my animation to remain on the screen when the animation ends and also when I export in a quick time movie .
    Does anyone can help me?

    A possible workaround would be to have something appear (like a shape) as a build outside the slide's viewing boundary (if you extend the size of the window, you'll see you have some workspace outside the slide) autmatically after the animation is finished, and set a delay time or build duration based on how long you need the slide to remain on the screen.  How this works will depend on your setup for quicktime export.

  • Timing goes out and audio cuts off at end of published slide sequence

    Hi
    I am experiencing a problem with timing and the sound cutting off at the end of a slide sequence.
    Here is my work flow:
    I record what I want my slide show to say, add my music and sound effects in Soundbooth. I then create a mp3 file for my slide show.
    I adjust my slide show timing to match my voice over, ensuring that the total number of minutes and seconds the slide show equates to matches the length of my audio. I then import my audio into my project while maintaining the slide timing.
    If I preview the individual slides to match the timing of the arrival of words or pointers in my presentation by pressing the play button in Captivate, everything is great.... until I publish to a .swf file.
    On a 2m:50sec slide show of 22 slides it cuts off approximately 5 seconds before the end. My timing which I have bent my brain on getting right, is out and appears to worsen the longer the slide show is or if it is not on the latest and greatest Mac powered computer.
    I have gone so far as to increase the length of time on the last slide 5 seconds beyond the length of time that the audio occupies as well as adding another 5 seccond blank slide and still have the same cut off problem. No ideas how to help the poor souls who might not have an amazing computer to watch the demonstration on?
    Interestingly if I publish and look only at the last 3 slides or if I look at a short sequence of slides or at a slide in isolation, my audio is there as it should be along with the timing. It would appear that the time "lost" or a lag between the presentation and the audio is the culprit.
    Kindly advise if there is a solution to this or whether the problem lies with something I am doing.
    Thank you in advance

    Has there been any new developments on this problem?
    I've been having to do some crazy work arounds to avoid audio cutting off at the end of slides when using CP5 for development.
    Then this week I had to review an old training which was published a long time ago only to discover that the same issue of audio cutting off is happening there.
    These materials were developed using CP4 and some even with CP3.  This means that the problem/change is not CP5 but probably something to do with the Flash player version because at the time of publshing the older files did not have this issue.
    This has me really worried.  There is no way I can go back and update all the old files and it means that previously perfect materials are now being viewed with audio cutting off.
    Have the Adobe Captivate developers considered the possiblity that this may be a flash player issue?  Have you discussed this with the Adobe Flash developers?  Will there be a fix for this anytime soon?
    Thanks,
    Aimee

  • Setting the last slide to stay on screen

    Hello, I am making a slide show for work and am not able to find a way to keep the last slide in the iPhoto slideshow on screen at the conclusion of the show (want to stay in presentation mode instead of going to the editing screen).
    Thanks!

    Yes, I think so. 
    Set each slide's duration time manually to what you want in the Settings/This Slide pane:
    The last slide can be set to a maximum of 999 seconds.
    If you choose music it will continue to play, repeating if the track isn't longer than 999 seconds, until the 999 seconds run out.  For longer than 999 seconds duplicate the last slide, add it at the end and set it to 999 seconds also. 
    OT

  • Pausing the last slide

    I am trying to figure out a way to pause the last slide of the project without inserting a button.  When the slide ends it fades to white and the last slide dissapears.  Is it possible to eliminate the fading to white and keeping the last slide visible?

    Hi Lilybiri
    Unfortunately, if Captivate 4 is being used I don't believe that change alone will fix it.
    I'm unsure as to the technical reason behind it, but this version changes the playing field such that even though you clear the Fade out at the end, all objects simply disappear and leave the background color showing.
    Hmmm, I just tried it with both AS2 and AS3. It seems that if AS2 (the default) is enabled, this is the behavior. But if you switch to AS3, things remain visible. Strange!
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for