END_OF_PAGE in alv report using oops
Experts,
Could you please give me the solution for the below issue?
Requirement is like this:
I have to display two grids in my report, and in that one grid will have top-of-page and other one will
have end-of-page. Here, I am able to display the data in the top-of-page but not able to display the data in
end of page. (Here I am using cl_gui_alv_grid : Class and Event is: END_OF_LIST.).
I gone through the BCALV_TEST_GRID_EVENTS, but that is not helpful to me.
Please anyone can you send the code snippet for the above one.
Thanks...
Sridhar..
Hi,
In the class cl_salv_table you have method get_event get the event from the method.
Pass u r end of page iver here .it raises the event end of page
thanks
Similar Messages
-
hi friendz,
can any one of u give an example, how to build alv report using oops abap ?
thanks in advance.
points for sure
regards,
VijayaHi Vijaya,
I hope the following code upto your requirement.
*& Report ZMAT_ALV_GRID *
REPORT ZCL_CLASS1.
TYPES: BEGIN OF T_MARA,
MATNR TYPE MARA-MATNR,
MAKTX TYPE MAKT-MAKTX,
WERKS TYPE MARD-WERKS,
LGORT TYPE MARD-LGORT,
LABST TYPE MARD-LABST,
END OF T_MARA.
*DATA: IT_MARA TYPE STANDARD TABLE OF T_MARA.
DATA: IT_MARA TYPE T_MARA OCCURS 0.
DATA: O_CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
O_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: X_FLDCAT TYPE LVC_S_FCAT.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: I_LAYOUT TYPE LVC_S_LAYO.
DATA: X_SORT TYPE LVC_S_SORT.
DATA: I_SORT TYPE LVC_T_SORT.
TABLES: MARA.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
PARAMETERS: P_CHK AS CHECKBOX.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM GENERATE_FLDCAT.
PERFORM GENERATE_LAYOUT.
PERFORM DO_SORT.
SET SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
PERFORM BUILD_ALV.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_ALV
text
FORM BUILD_ALV .
CREATE OBJECT O_CONT
EXPORTING
CONTAINER_NAME = 'MAT_CONTAINER'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
others = 6.
CREATE OBJECT O_GRID
EXPORTING
I_PARENT = O_CONT
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5.
CALL METHOD O_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = ' '
IS_LAYOUT = I_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_MARA
IT_FIELDCATALOG = IT_FLDCAT[]
IT_SORT = I_SORT
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4.
ENDFORM. " BUILD_ALV
*& Form GET_DATA
text
FORM GET_DATA .
SELECT A~MATNR
B~MAKTX
C~WERKS
C~LGORT
C~LABST
INTO TABLE IT_MARA
FROM MARA AS A
INNER JOIN MAKT AS B
ON BMATNR = AMATNR
INNER JOIN MARD AS C
ON CMATNR = AMATNR
WHERE A~MATNR IN S_MATNR
AND B~SPRAS = SY-LANGU.
ENDFORM. " GET_DATA
*& Form GENERATE_FLDCAT
text
FORM GENERATE_FLDCAT .
*CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'ZSMARA'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME = ' '
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
X_FLDCAT-COL_POS = 1.
X_FLDCAT-FIELDNAME = 'MATNR'.
X_FLDCAT-OUTPUTLEN = '18'.
X_FLDCAT-REPTEXT = 'Material No'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 2.
X_FLDCAT-FIELDNAME = 'MAKTX'.
X_FLDCAT-OUTPUTLEN = '48'.
X_FLDCAT-REPTEXT = 'Material Desc'.
X_FLDCAT-TOOLTIP = 'Material Desc'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 3.
X_FLDCAT-FIELDNAME = 'WERKS'.
X_FLDCAT-OUTPUTLEN = '5'.
X_FLDCAT-REPTEXT = 'Plant'.
X_FLDCAT-TOOLTIP = 'Plant'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 4.
X_FLDCAT-FIELDNAME = 'LGORT'.
X_FLDCAT-OUTPUTLEN = '5'.
X_FLDCAT-REPTEXT = 'S.Loc'.
X_FLDCAT-TOOLTIP = 'S.Loc'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 5.
X_FLDCAT-FIELDNAME = 'LABST'.
X_FLDCAT-OUTPUTLEN = '20'.
X_FLDCAT-REPTEXT = 'Quantity'.
X_FLDCAT-TOOLTIP = 'Quantity'.
X_FLDCAT-DO_SUM = 'X'.
APPEND X_FLDCAT TO IT_FLDCAT.
ENDFORM. " GENERATE_FLDCAT
*& Form GENERATE_LAYOUT
text
FORM GENERATE_LAYOUT .
I_LAYOUT-ZEBRA = 'X'.
I_LAYOUT-FRONTEND = 'X'.
I_LAYOUT-GRID_TITLE = 'ALV GRID USING OOPS'.
I_LAYOUT-NUMC_TOTAL = 'X'.
ENDFORM. " GENERATE_LAYOUT
*& Form DO_SORT
text
FORM DO_SORT .
X_SORT-FIELDNAME = 'MATNR'.
X_SORT-UP = 'X'.
X_SORT-SUBTOT = 'X'.
IF P_CHK = 'X'.
X_SORT-EXPA = SPACE.
ELSE.
X_SORT-EXPA = 'X'.
ENDIF.
APPEND X_SORT TO I_SORT.
ENDFORM. " DO_SORT
inorder to execute this code perfectly, do the following things.
1. Create a Graphical Screen 100.
2. Place a Custom Control on that screen and give name as MAT_CONTAINER.
3. activate the screen.
and execute the program.
if this suits requirement award points.
satish -
ALV report using OOPS concept.
Hi,
Please help me in writing ALV report using OOPS concept as i have never used this concept before.Please post a clear picture for this.
Thanks in advance.Hi
Refer this code:
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant
Thanks
Vasudha -
Disbable button on alv report using oops
Hi all,
I have a button to toll bar of alv grid using oops
based on that when the user clicks on that some action is performed and list is displayed again
now when the list is diaplyed i need the button that i added to be disabled so that the user cannot click it agin
i have everything i don't know how to disable the button.
USING THIS STATMENT move 'X' to ls_toolbar-disabled WE CAN DISABLE BUT I DON'T WHERE TO PASS IT..
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
define and handle own functions.
Definition:
~~~~~~~~~~~
class lcl_event_receiver definition.
public section.
methods:
handle_toolbar
for event toolbar of cl_gui_alv_grid
importing e_object e_interactive,
handle_user_command
for event user_command of cl_gui_alv_grid
importing e_ucomm.
private section.
endclass.
lcl_event_receiver (Definition)
*===============================================================
LOCAL CLASSES: Implementation
*===============================================================
class lcl_event_receiver (Implementation)
class lcl_event_receiver implementation.
method handle_toolbar.
append a separator to normal toolbar
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
append an icon to show booking table
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move '' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
endmethod.
method handle_user_command.
case e_ucomm.
when 'ADD'.
call method g_grid->get_selected_rows
importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
if sy-subrc ne 0.
add your handling, for example
call function 'POPUP_TO_INFORM'
exporting
titel = g_repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
else.
*tHIS IS THE PART IAM HAVING PROBLEM WITH
*class lcl_event_receiver implementation.
method handle_toolbar.
*clear : ls_toolbar.
loop at e_object->mt_toolbar into ls_toolbar WHERE FUNCTION = 'ADD'.
DELETE e_object->mt_toolbar FROM ls_toolbar.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
endloop.
*ENDMETHOD.
*ENDCLASS.
***tHIS IS THE PART
call method g_grid->refresh_table_display.
endif.
endcase.
endmethod.
Thanks in advanceHi
hI ALL,
MY QUESTION IS WHEN method handle_toolbaR WOULD BE TRIGERRED
first time i have the button enabled and when i press the button its get disabled.This is what i need
But iam trying to understand how this is working
Let me know whether iam right or not
when this piece of code would be triggered
method handle_toolbar.
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
IF FLAG = 'X'.
LOOP AT e_object->mt_toolbar INTO ls_toolbar.
if ls_toolbar-function = 'ADD'.
ls_toolbar-disabled = 'X'.
MODIFY e_object->mt_toolbar FROM ls_toolbar.
endif.
ENDLOOP.
ENDIF.
1 ) would this be triggered
when i call this call method g_grid->refresh_table_display.
2)or
call method g_grid->set_toolbar_interactive
This is my piece of code
class lcl_event_receiver definition.
public section.
methods:
handle_toolbar
for event toolbar of cl_gui_alv_grid
importing e_object e_interactive,
handle_user_command
for event user_command of cl_gui_alv_grid
importing e_ucomm.
private section.
endclass.
class lcl_event_receiver implementation.
method handle_toolbar.
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
IF FLAG = 'X'.
LOOP AT e_object->mt_toolbar INTO ls_toolbar.
if ls_toolbar-function = 'ADD'.
ls_toolbar-disabled = 'X'.
MODIFY e_object->mt_toolbar FROM ls_toolbar.
endif.
ENDLOOP.
ENDIF.
endmethod.
method handle_user_command.
case e_ucomm.
when 'ADD'.
call method g_grid->get_selected_rows
importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
if sy-subrc ne 0.
else.
perform test.
call method g_grid->refresh_table_display.
endif.
endcase.
endmethod. "handle_user_command
odule status_0100 output.
SET PF-STATUS 'STATUS'.
set pf-status 'MAIN100'.
set titlebar 'HEADER_CHECK'.
if g_custom_container is initial.
create object g_custom_container
exporting container_name = g_container.
create object g_grid
exporting i_parent = g_custom_container.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'ZTEST'
changing
ct_fieldcat = fieldcat
exceptions
others = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
g_layout-sel_mode = 'A'. " TO GET SELECTION BOX
call method g_grid->set_table_for_first_display
exporting
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = g_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude
IT_HYPERLINK =
IT_ALV_GRAPHICS =
changing
it_outtab = i_zTEST
it_fieldcatalog = fieldcat
IT_SORT =
IT_FILTER =
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4
create object event_receiver.
set handler event_receiver->handle_user_command for g_grid.
set handler event_receiver->handle_toolbar for g_grid.
call method g_grid->set_toolbar_interactive.
endif. "IF grid1 IS INITIAL
call method cl_gui_control=>set_focus exporting control = g_grid.
endmodule. " STATUS_0100 OUTPUT
Thanks
Suchitra -
Hi frnds,
I want to write an alv report program using oops concepts.CAn anybody send me a simple code to generate an alv reports?
Thanks a lot in advance.Hi
http://www.sapdev.co.uk/reporting/alv/alvobjgrid/alvobject_sort.htm
*& Report ZLCL_ALV_INVOICE *
REPORT ZLCL_ALV_INVOICE .
TABLES: VBRK.
DATA: ITAB LIKE VBRP OCCURS 1 WITH HEADER LINE.
DATA: O_CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
O_GRID TYPE REF TO CL_GUI_ALV_GRID.
START-OF-SELECTION.
SET SCREEN 100.
*& Form GET_DATA
text
FORM GET_DATA .
SELECT *
FROM VBRP
INTO TABLE ITAB
WHERE VBELN = VBRK-VBELN.
ENDFORM. " GET_DATA
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
IF O_CONT IS INITIAL.
CREATE OBJECT O_CONT
EXPORTING
CONTAINER_NAME = 'INV_CONT' "Screen custom control name
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in custom container'.
EXIT.
ENDIF.
CREATE OBJECT O_GRID
EXPORTING
I_PARENT = O_CONT "Custom container class object
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in alv grid linking'.
EXIT.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module SHOW_ALV_GRID INPUT
text
MODULE SHOW_ALV_GRID INPUT.
PERFORM GET_DATA.
CALL METHOD O_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'VBRP'
CHANGING
IT_OUTTAB = ITAB[]
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in showing alv grid'.
EXIT.
ENDIF.
ENDMODULE. " SHOW_ALV_GRID INPUT
you can understand very easily -
Creating ALV reports using OOP concept
After creating many reports i found out that 90% of the coding in a report is copy paste i.e. only 10% of coding effort is required which includes
creating the custom data types and internal table variables ...
populating the data
creating screen,GUI status and GUI title
Just copy paste the below code and do as stated :
*ALV TEMPLATE
*create screen no. 2000
*change flow logic in screen if necessary
*create GUI status and GUI title
*change selection texts and text symbols*
REPORT Y_TEMPLATE_ALV.
TABLES : ."use if range of values required on selection screen.
DATA: zcl_alvgrid TYPE REF TO cl_gui_alv_grid,
zcl_ccontainer TYPE REF TO cl_gui_docking_container,
wa_layout TYPE lvc_s_layo,
it_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
wa_fieldcat TYPE lvc_s_fcat,
z_document TYPE REF TO cl_dd_document,
o_docking TYPE REF TO cl_gui_docking_container,"Docking Container
o_split TYPE REF TO cl_gui_easy_splitter_container, "Splitter
o_top_container TYPE REF TO cl_gui_container, "Top Container
o_bottom_container TYPE REF TO cl_gui_container."Bottom Container
TYPES : BEGIN OF TY_FINAL,
"All columns which are to be displayed in the report should be included here
END OF TY_FINAL.
*Add additional Internal Tables's if data is to be extracted from multiple tables
*Then loop at main table and Read the other tables
DATA :IT_DATA TYPE STANDARD TABLE OF , "data extracted from tables can be stored in this internal table variable ..
WA_DATA TYPE ,
iT_alv TYPE STANDARD TABLE OF TY_FINAL, " pass to the method SET_TABLE_FOR_FIRST_DISPLAY of class
ZCL_ALVGRID [Already done ; its just fyi]
WA_alv TYPE TY_FINAL.
DATA :V_CLN(255) TYPE C, " For no. of records
V_LINE TYPE I. " for conversion of integer to character
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
SELECT-OPTIONS: " PARAMETERS and Range on selection screen
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
* START OF SELECTION *
START-OF-SELECTION.
* SELECT * FROM INTO CORRESPONDING FIELDS OF TABLE IT_DATA WHERE ....in ....
IF SY-SUBRC = 0.
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO wa_alv. " if data is fetched from only one table
APPEND wa_alv TO it_alv.
CLEAR : wa_alv,WA_DATA.
ENDLOOP.
DESCRIBE TABLE it_alv LINES V_LINE.
V_CLN = V_LINE.
ENDIF.
END-OF-SELECTION.
PERFORM DISPLAY_ALV.
*& Module STATUS OUTPUT
* text
MODULE STATUS_2000 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'ALV'.
* ** Creating Docking Container
CREATE OBJECT o_docking
EXPORTING
* side = cl_gui_docking_container=>dock_at_right
ratio = '95'.
IF sy-subrc EQ 0.
* Splitting the Docking container
CREATE OBJECT o_split
EXPORTING
parent = o_docking
sash_position = 05 "Position of Splitter Bar (in Percent)
with_border = 0. "With Border = 1 Without Border = 0
* Placing the containers in the splitter
o_top_container = o_split->top_left_container .
o_bottom_container = o_split->bottom_right_container .
* Creating the document
CREATE OBJECT z_document
EXPORTING
style = 'ALV_GRID'.
ENDIF.
* Calling the methods for dynamic text
CALL METHOD z_document->add_text
EXPORTING
TEXT = 'No. of Records:'
sap_emphasis = cl_dd_area=>strong. " For bold
* Adding GAP
CALL METHOD z_document->add_gap
EXPORTING
width = 10.
* Adding Text
CALL METHOD z_document->add_text
EXPORTING
TEXT = v_cln.
* Adding Line
CALL METHOD z_document->new_line.
* Display the data
CALL METHOD z_document->display_document
EXPORTING
parent = o_top_container.
IF zcl_alvgrid IS INITIAL .
*----Creating ALV Grid instance
CREATE OBJECT zcl_alvgrid
EXPORTING
i_parent = o_bottom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Calling the method of ALV to process top of page
CALL METHOD zcl_alvgrid->list_processing_events
EXPORTING
i_event_name = 'TOP_OF_PAGE'
i_dyndoc_id = z_document.
* Preparing field catalog.
PERFORM T_FIELDCAT USING:
'1' 'BRNCD' 'BRAND'.
* 'Column no' 'FIELDNAME' 'Column Heading'
WA_LAYOUT-CWIDTH_OPT = 'X'.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-SEL_MODE = 'A'.
* Setting table for first display
CALL METHOD ZCL_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = WA_LAYOUT
CHANGING
IT_OUTTAB = it_alv
IT_FIELDCATALOG = IT_FIELDCAT
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL METHOD ZCL_ALVGRID->REFRESH_TABLE_DISPLAY
EXCEPTIONS
FINISHED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. " STATUS OUTPUT
MODULE USER_COMMAND_2000 INPUT.
DATA: V_OK_CODE TYPE SY-UCOMM,
V_SAVE_OK TYPE SY-UCOMM.
V_OK_CODE = SY-UCOMM.
V_SAVE_OK = V_OK_CODE.
CASE SY-UCOMM.
WHEN 'BACK'.
SET SCREEN 1000.
WHEN 'EXIT'.
LEAVE program.
WHEN OTHERS.
SET SCREEN 1000.
ENDCASE.
CLEAR V_SAVE_OK.
SET SCREEN 0.
LEAVE SCREEN.
ENDMODULE. " USER_COMMAND_2000 INPUT
*& Form T_FIELDCAT
* text
* -->x text
* -->y text
* -->z text
FORM T_FIELDCAT USING VALUE(X) TYPE ANY
VALUE(Y) TYPE ANY
VALUE(Z) TYPE ANY.
WA_FIELDCAT-COL_POS = X.
WA_FIELDCAT-FIELDNAME = Y.
WA_FIELDCAT-COLTEXT = Z.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " T_FIELDCAT
*& Form DISPLAY_ALV
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_ALV .
IF NOT it_alv[] IS INITIAL.
CALL SCREEN 2000.
ELSE.
MESSAGE 'No data for Display' TYPE 'I'.
ENDIF.
ENDFORM. " DISPLAY_ALVHello Jay,
Calling methods, creating instances, casting etc are not OOP. When you say you've developed an OO-report you think OO, refer to this blog to see what i mean - Global Data in ABAP OO Programs
BR,
Suhas -
ALV Report using OOPS - Back button(F3) flow not correct
Hi,
When i try to execute my report (F8) and it goes to output screen perfectly.
Then if i hit back button(F3) it comes to selection screen that's also fine.
after then if i hit back button(F3) then it goes to output screen again.
actually it has to go to the SE38 - program screen
My GUI logic:
*& Include ZSD_GUILOGIC
*& Module init_0100 OUTPUT
text
MODULE init_0100 OUTPUT.
call method cl_gui_cfw=>dispatch.
create the report object
if my_report is initial.
CREATE OBJECT MY_REPORT
EXPORTING
SO_VKORG = so_vkorg[]
SO_VTWEG = so_vtweg[]
SO_DATE = so_date[].
endif.
IF my_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT my_CUSTOM_CONTAINER
EXPORTING
CONTAINER_NAME = _CONTAINER.
CREATE OBJECT my_GRID1
EXPORTING
I_PARENT = my_CUSTOM_CONTAINER.
int_tab = my_report->RETURN_RESULT( ).
CALL METHOD my_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
is_variant = my_layout
i_save = 'A'
i_default = 'X'
I_STRUCTURE_NAME = structure
CHANGING
IT_OUTTAB = int_tab[].
else.
container actually exists.
int_tab = my_report->RETURN_RESULT( ).
MY_grid1->refresh_table_display( ).
endif.
ENDMODULE. " init_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
to react on oi_custom_events:
CASE OK_CODE.
WHEN 'EXIT'.
PERFORM EXIT_PROGRAM.
when 'BACK'.
clear: my_report, my_CUSTOM_CONTAINER, my_grid1, int_tab.
leave
CALL SELECTION-SCREEN 1000.
WHEN 'REFRESH'.
int_tab = my_report->RETURN_RESULT( ).
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR OK_CODE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
text
--> p1 text
<-- p2 text
FORM EXIT_PROGRAM .
LEAVE PROGRAM.
ENDFORM. " EXIT_PROGRAM
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN0100'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUTHI,
Thanks for ur replies.
I am calling selection screen 100 like this.
REPORT ZSD_.
INCLUDE ZSD__TOP.
INCLUDE ZSD_LCL000.
INCLUDE ZSD_GUILOGIC.
initialization.
move 'IEQ000' to so_vrsio.
append so_vrsio.
move 'IEQ' to so_date.
so_date-low = sy-datum.
so_date-high = sy-datum.
append so_date.
start-of-selection.
set the layout
perform prepare_layout changing my_layout.
Thanks
Praba
set the structure
structure = 'ZSD_LEVEL0'.
call the processing screen 0100
set screen '0100'. -
ALV Interactive Report using oops
Hi All ,
Pls anybody send me the code for ALV interactive report using OOPS , that reports covers the following things like Header , Logo , Total& subtotals .....etc ,
with this i can complete my object .
thanks in Adv
Rgds
Rafi .Hi
this code is helpful for u.check it.
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Regards,
Sree -
Display error message in ALV grid using OOPS
Hi,
I have a requirement to display report in ALV. I have created ALV grid using OOPS with three editable cells and 1 button on toolbar. When user enter values in Ediatble cell and click on the Toolbar button, sales order item should be assigned to contract.
When the user select the row and click on toolbar button, a salesorder item should be assigned to contract and i am using BAPI and fine with BAPI. All the error message should be displayed in a popup and the corresponding failed row should change its color .
Once the user identified the failed row, he can edit the value in the ediatble cells and should reprocess in the same screen ( without going back to selection screen).
To display POP Up, I am using FM BAL_LOG_CREATE, BAL_LOG_MSG_ADD, BAL_DSP_PROFILE_NO_TREE_GET, BAL_CNTL_CREATE.
by using above 4 FM , i can display POP UP. but i cannot change the color of the failed row.
Once I identified the failed row and reprocess from the same screen , I am successful in processing the failed row, but my error log still has the reprocessed row as failed row because, error log is not refreshing.
Please suggest me how to clear error log which was created by using the above FM's and change the color of the failed row .
Thanks in AdvanceHi
Please suggest me how to clear error log which was created by using the above FM's....
U can use BAL_LOG_REFRESH
....and change the color of the failed row
You need to insert a new field for Colour Attributes in your output table and input its name in the layout structure:
IS_LAYOUT-INFO_FNAME = <field name for colour>
The field has to be a CHAR 3 and its value can be -
> Cxy
C is a constant
x is the colour number (from 1 to 9)
y is intensified (0 = off, 1 = on)
After changing the value of output table you need to run the method REFRESH_TABLE_DISPLAY for refreshing the output
Max -
Toolbar in alv display using oops alv
i have written code for displaying toolbar in alv display using oops, but it is not displaying please find the below code and let me know reason.
*& Report ZTRANSFER_ORDER2 *
REPORT ZTRANSFER_ORDER2 .
*& Report ZTRANSFER_ORDER *
TABLES:sflight.
TYPE-POOLS : icon.
* G L O B A L I N T E R N A L T A B L E S
CLASS lcl_event_receiver DEFINITION DEFERRED.
types : begin of ty_mara,
matnr type matnr,
mtart type mtart,
mbrsh type mbrsh,
matkl type matkl,
bismt type bismt,
meins type meins,
end of ty_mara.
DATA: t_mara type STANDARD TABLE OF ty_mara.
* G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
g_wa_mara type ty_mara.
DATA : t_fcat type LVC_T_FCAT.
DATA : l_VAR TYPE disvariant.
DATA : gs_layout type lvc_s_layo.
* Declare reference variables to the ALV grid and the container
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container.
data : it_toolbar TYPE stb_button,
event_receiver TYPE REF TO lcl_event_receiver.
* S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
CALL SCREEN 100 .
*CLASS lcl_event_receiver DEFINITION.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
*handling toolbar for interactive
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
*handling menu button
handle_menu_button
FOR EVENT menu_button OF cl_gui_alv_grid
IMPORTING e_object e_ucomm,
*On click of the menu button
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
PRIVATE SECTION.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
handle toolbar
CLEAR it_toolbar.
MOVE 'DETAIL' TO it_toolbar-function.
MOVE icon_detail TO it_toolbar-icon.
MOVE 2 TO it_toolbar-butn_type.
APPEND it_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
METHOD handle_menu_button.
handle own menubuttons
IF e_ucomm = 'DETAIL'.
CALL METHOD e_object->add_function
EXPORTING
fcode = 'DISPLAY'
text = 'DISPLAY'.
ENDIF.
ENDMETHOD. "handle_menu_button
METHOD handle_user_command.
*On click
CASE e_ucomm.
WHEN 'DISPLAY'.
MESSAGE 'Menu Clicked' TYPE 'I'.
ENDCASE.
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
sET PF-STATUS 'STATUS'.
Create objects
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
PERFORM load_data_into_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form load_data_into_grid
FORM load_data_into_grid.
Read data from table SFLIGHT
SELECT matnr mtart mbrsh matkl bismt meins
FROM mara
INTO corresponding fields of TABLE t_mara.
PERFORM fld_cate changing T_fcat.
l_var-report = sy-repid.
gs_layout-grid_title = 'Analysis Report'.
gs_layout-NO_TOOLBAR = 'X'.
gs_layout-BOX_FNAME = 'Selection'.
Load data into the grid and display them
caLL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'S_MVKE'
i_save = 'A'
is_variant = l_var
is_layout = gs_layout
CHANGING
it_outtab = t_mara[]
it_fieldcatalog = t_fcat.
endform.
*& Module pai INPUT
text
MODULE pai INPUT.
data: l_valid type c.
clear ok_code.
break-point.
ok_code = sy-ucomm.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
call method go_grid->check_changed_data
importing
e_valid = l_valid.
loop at t_mara into g_wa_mara.
endloop.
ENDCASE.
ENDMODULE. " pai INPUT
*& Form fld_cate
text
<--P_T_FCAT text
FORM fld_cate CHANGING P_T_FCAT TYPE lvc_t_fcat.
DATA : s_fcat type LVC_S_FCAT .
REFRESH: t_fcat.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX1'.
s_fcat-coltext = 'Box1'.
s_fcat-seltext = 'Box1'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 1.
s_fcat-col_pos = 1.
s_fcat-fieldname = 'MATNR'.
s_fcat-ref_field = 'MATNR'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Material'.
s_fcat-seltext = 'Material'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 2.
s_fcat-col_pos = 2.
s_fcat-fieldname = 'MTART'.
s_fcat-ref_field = 'MTART'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Material type'.
s_fcat-seltext = 'Material type'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX2'.
s_fcat-coltext = 'Box2'.
s_fcat-seltext = 'Box2'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 3.
s_fcat-col_pos = 3.
s_fcat-fieldname = 'MBRSH'.
s_fcat-ref_field = 'MBRSH'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Industry Sector'.
s_fcat-seltext = 'Industry Sector'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 4.
s_fcat-col_pos = 4.
s_fcat-fieldname = 'MATKL'.
s_fcat-ref_field = 'MATKL'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Material Group'.
s_fcat-seltext = 'Material Group'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 5.
s_fcat-col_pos = 5.
s_fcat-fieldname = 'BISMT'.
s_fcat-ref_field = 'BISMT'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Old material number'.
s_fcat-seltext = 'Old material number'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 6.
s_fcat-col_pos = 6.
s_fcat-fieldname = 'MEINS'.
s_fcat-ref_field = 'MEINS'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext = 'Base Unit of Measure'.
s_fcat-seltext = 'Base Unit of Measure'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX3'.
s_fcat-coltext = 'Box3'.
s_fcat-seltext = 'Box3'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
ENDFORM. " fld_cate .MOVE 2 TO it_toolbar-butn_type.
Try changing the 2 (menu) to 0 (button) and see if that helps
also you need to set the event handler after you create your alv object
set handler handle_toolbar for [whatever object is called].
Edited by: Kev Mycock on Jul 24, 2008 7:59 AM -
Alv output using oops for numc field
Hi,
iam displaying alv output using oops.
one of output field data type numc and length 4.
in field catalog i set lzero = 'X'.
now data is coming with leading zero. if data contains 0000 i want blank value in report output.
i tried with no_zero = 'X' blank values are display but leading zero are not display for other values.
how can i change the code.
Regards,
Suresh.You will have to use data type char in your case.
regards,
Advait -
Sub total in ALV GRID using oops concept
Hi,
If Plant (VBAP-WERKS) is not the same for all items on a Sales Order (VBAK-VBELN is the same for al items) then create a separate line on the report for each different plant specified in the line items. Copy all fields from the original order line except for plant and Net Value. Net Value should be the total of item Net Values for all items with the same plant in the order.
Example:
Data:
Order---- Item- Plant- Net Value---
123---- 010- 3467- 100.00---
123---- 020- 7865- 50.00---
123---- 030- 3467- 80.50---
Report:
Order- Plant- Net Value---
123- 3467- 180.50---
123- 7865- 50.00----
I need to dispaly the Report format in ALV Grid using oops concept...
no need of calling any function modules.
Regards,
NithyaHi
Here is example code
This is the method to be called:
get_subtotals
Use
Returns the current subtotals of the ALV Grid Control. Having created totals for at least one column, users can calculate at most nine subtotals. The list is sorted by the values of one or several columns (called the subtotals column). If a value is changed in the subtotals column, the subtotal is displayed (this is also referred to as control level change).
Integration
Before you access the subtotals value, you use the method get_sort_criteria to get the sort table . One row of this table describes properties of a column in the output table.
If the field SUBTOT is set for a column in this table, the column is a subtotals column.
The field SPOS then indicates at which level (see below) the subtotal has been calculated.
The field FIELDNAME contains the name of the subtotals column in the output table.
Based on this information, you specifically access the values of the tables passed (using reference variables COLLECT01 to COLLECT09).
Features
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->get_subtotals
IMPORTING
EP_COLLECT00 = <reference variable of type REF TO DATA>
EP_COLLECT01 = <reference variable of type REF TO DATA>
EP_COLLECT02 = <reference variable of type REF TO DATA>
EP_COLLECT03 = <reference variable of type REF TO DATA>
EP_COLLECT04 = <reference variable of type REF TO DATA>
EP_COLLECT05 = <reference variable of type REF TO DATA>
EP_COLLECT06 = <reference variable of type REF TO DATA>
EP_COLLECT07 = <reference variable of type REF TO DATA>
EP_COLLECT08 = <reference variable of type REF TO DATA>
EP_COLLECT09 = <reference variable of type REF TO DATA>
ET_GROUPLEVELS = <ínternal table of type LVC_T_GRPL>.
In order to access the values of EP_COLLECT00 to EP_COLLECT09, you use ASSIGN to dereference the relevant reference variable in a field symbol of your output table type (see below).
Parameters
Meaning
EP_COLLECT00
Points to the totals line. Since there is only one totals line which, in addition, has a unique totalling area, no further information is available for this table in table ET_GROUPLEVELS.
get_subtotals
EP_COLLECT01 to EP_COLLECT09
Point to the subtotals line. For each subtotals level, there is one reference variable. Each of these variables points to an internal table that has the type of the output table. EP_COLLECT01 points to the subtotal at the hightest level, while EP_COLLECT02 points to the subtotal at the second highest level, and so on. The levels are derived from the sort priority (field SPOS in the sort table ). The column by which the data was sorted first, is the highest subtotals level.
ET_GROUPLEVELS
Manages all indexes for the individual control levels. The fields of the table have the following meaning:
INDEX_FROM, INDEX_TO: Rows of the output table for which the subtotal was created
LEVEL: Subtotals level (see above)
COUNTER: Number of rows for which the subtotal was created
COMPRESS: For this subtotals line, the user has hidden the associated rows.
COLLECT: Indicates the subtotals table (01-09) in which the values are stored
For an overview, see Methods of Class CL_GUI_ALV_GRID
Activities -
A simple ALV report using classes & methods ...
i want a simple ALV report using classes & methods ...
my requirement : i have to use classes & methods instead of calling a function module to display in grid or list format.
plz send me with explanation ASAP...it's very urgent..
Thanks in advance .Hi
Please refer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
U can use methods for vreating ALVs.
There is a method named set_table_for_first_display in OOP Concepts.
Use this Object Oriented Approach for ALV Creation
Calling the method set_table_for_first_display
CALL METHOD cust_alv->set_table_for_first_display
EXPORTING
is_layout = gst_layout
CHANGING
it_outtab = gt_list
it_fieldcatalog = gt_fcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Object Creation and all
Creation of Object for Container
CREATE OBJECT cust_container
EXPORTING
container_name = 'ALV_CONTAINER'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Creation of Object for ALV Grid
CREATE OBJECT cust_alv
EXPORTING
i_parent = cust_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Layout settings
gst_layout-zebra ='X'.
gst_layout-cwidth_opt = 'X'.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'ZCS_INACTV_CUST'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Calling the method set_table_for_first_display
CALL METHOD cust_alv->set_table_for_first_display
EXPORTING
is_layout = gst_layout
CHANGING
it_outtab = gt_list
it_fieldcatalog = gt_fcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
For object oriented concepts refer this link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
Reaward if helpful -
End of Page event in ALV report using SALV class[cl_salv_hierseq_table]
Hi ,
have been working on a ALV report using the class SALV cl_salv_hierseq_table
I am facing few issues pertaining to two things:
1. Displaying some subtotal text along with the subtotals.
Example refer the standard demo example: SALV_DEMO_HIERSEQ_FORM_EVENTS
Now instead of A 17 and A26 I would like to show text like Subtotal for the Carrid.for subtotals and grand totals
Like Subtotal for A 17 is : XXXXXXX
GrandTotal is : YYYYYY
2. We have a page break and a new page for every purchasing group as in the standard example SALV_DEMO_HIERSEQ_FORM_EVENTS for CARRID.
I need to display some variable values as number of documents ,total number of records etc at the end of each CARRID group before a new page starts for the next CARRID.Please note i do not want it on every page.it should only be diaplyed at the end of page whose next page would be for next CARRID.[basically at end of every carrid]Example:after displaying all details for AA need to display the number of records for that carrid at the end of the page[as page break is based on CARRID]/
Thanks
Jyotsnaat end of page event, for CL_SALV_EVENTS_HIERSEQ, has some useful parameters allowing to know where you are at the time of event
parameter VALUE is of type CL_SALV_FORM which contains public attribute IF_SALV_FORM~ACCDESCRIPTION; you can slo get contents of it
about text of total/subtotal, this is normally set in the layout -
Download alv report using layout variant in background
Hi All,
I want to download an Alv report using layout varaint in background job.
can any one please help me.
i.e...
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.
Will rewards to helpfull ans
regards
Chetanhey seshu,
I am facing a problem in downloading a text file to the Application server.
My requirement is, when the user downloads a file with the layout variant, the file should have only the columns which was selected in the variant.
Maybe you are looking for
-
How to get to 32-bit mode in Photoshop on Yosemite
Having a problem. I need Photoshop to run in 32-bit mode in order to access "Lighting Effects". Photoshop users will know what I'm talking about, it's unavailable and greyed out in 64-bit mode. But I don't see the option to select it. My understandin
-
My iPod shuffle is not appearing in my iTunes?
My Ipod shuffle is not appearing in Itunes any suggestions?
-
Recognize Text Using OCR from DLL
Hi: We are a service company,working on a project we need to do OCR on PDF files: convert a PDF to a searchable PDF. The customer has licenses for Adobe Acrobat Pro Extended. The problem we have to solve it: from a JSP page, run an applet and to have
-
Authorizations for the cluster PY
Dear Friends... I have this issue at this moment... Authorizations for the cluster PY, they want that some user can see the cluster with the exception of infotype 8 and 62, and the same process in pa30 and ad hoc query, I think in pa30 and adhoc quer
-
Hi, - I have some problems to write a file in a BLOB field of an Oracle 9i database. I don't want to use oracle.sql.BLOB class because I want my application to accept all kinds of database, so I want to use java.sql.Blob class. 1/ First I create a re