End of Stream has been reached error CS4

After transcoding the main video file during the build, Encore then prepares "Planning audio for movie" at which case the error "end of stream has been reached" pop up window appears and the burn subsequently fails. There are no errors within the project and I have burned the project successfully onto a DVD with no error in the past. The only changes this time around is a re encoding of the video file (Uncompressed AVI 1920 x 1280 max depth bit), a change in the video thumbnails for the chapter selection pages, and a tweeking of the chapter points. Because the video file is so large, I delete the previous AVI file and export again using the same name to create the approriate links. I have read that the sound compression is the main cause for this error, however, I have not done anything sound related between versions of the DVD. How can I fix this error from occurring? Thanks in advance.

Especially with muxed (Audio & Video), there is a slightly different Block Size for each stream, so what appears to match 100% in PrPro can be every so slightly longer (Audio), when Transcoded. That is why I always leave a touch of "silence" in my Audio.
For my edits, I almost always start with a Dip-to-Black, from an 02 sec. bit of Black Video, and then end with another 02 sec. of Black Video. My Audio always ends, just before the end of that Black Video. This also makes things seem to flow better, between Timelines, as the user sees things Dip-to-Black, and unless they have a stopwatch going, do not know if a moment has elapsed, when the laser moves, and the next Timeline comes up from black. There is never a jolting "black flash."
Good luck,
Hunt

Similar Messages

Encore DVD Error Message - "End of Stream has been reached"

I have created a project In Encore 2. it has motion menus, subtitles and sound. When we go to preview the project it gives us this error
"End of Stream has been reached"
We have checked our assets and the audio and video are DVD standard.
We did a check project and it found no errors with the project.
We are running Windows XP SP2 on a network, 2GB memory, 200GB hard drive Dell OptiPlex Desktop
Dose anyone know what we should do???

The End of Stream Message can be solved by removing one or moor unwanted elements from the time line. in my case that was a jpg image that encore didnt liked.
It is very difficult to find out witch element you need to remove, but that is the only solution.

"End of Stream has been reached"

"End of Stream has been reached"
I get this message when trying to preview my project. I started this project in Encore DVD 1.5, and I get this error message when I'm editing it in the new Encore DVD 2.0 trial.
Thanks in advance.

Hello Jesse,
I found a solution for you !
I had the same problem : opening in encore dvd 2.0 trial a project made in 1.5. Trying to preview the menus, got the "end of stream" error.
In my project, the problem was a sound, used on a menu, that was bad encoded : it was in 44.1 Khz instead of the "dvd standard" 48 khz. When previewing the menu in 1.5, encore dvd did a transcode. But the 2.0 version seemed to have problems with the transcoded sound, because I replaced it in the menu with a upsampled 48khz sound (out of encore, with a sound software) and, MIRACLE ! it works !!!
My analysis of the problem is : when you preview a menu, Encore loads in the RAM the whole menus of your projects. Therefore, if you have only one menu bugging, it will affect all your preview !
I recommend you to check that all you assets are to the dvd standards, and if it still bugs, try to delete the transcodes (in the folder : x:\your project\Sources\Transcodes OR on the C:\Documents and Settings\USER NAME\Local Settings\Temp\Sonic\Transcodes)

End of Input has been reached

hi-
I have a massive query in my answer producing error message:
Error Details
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 295120032. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27001] End of input has been reached. Illegal syntax. (HY000)
This is because I have so many syntax in each columns. Is there anyone experienced this before, is there any setting needed to be set to prevent this error?
Thanks,
Will

Hi-
Thanks for the replies, Nico, and Joe;
Joe is correct, I'm using FILTER(<MEASURE> USING <CONDITION>) extensively:
IFNULL((
     IFNULL(FILTER(Measures.Revenue USING Period."Month"='Dec' AND Period."Year"= CAST(CAST(VALUEOF("CURR_YEAR") AS INTEGER)-1 AS CHAR(4))),0)*
     IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Jan' AND Period."Year"=VALUEOF("CURR_YEAR")),0)-
     IFNULL(FILTER(Measures.Revenue USING Period."Month"='Dec' AND Period."Year"= CAST(CAST(VALUEOF("CURR_YEAR") AS INTEGER)-1 AS CHAR(4))),0)*
     IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Dec'AND Period."Year"= CAST(CAST(VALUEOF("CURR_YEAR") AS INTEGER)-1 AS CHAR(4))),0)
(IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Jan' AND Period."Year"=VALUEOF("CURR_YEAR")),0)*-1)
,0) +
CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,LEFT('@{pv_period}{Jun-2009}',3))) AS INT)
THEN
     0
ELSE
     IFNULL((CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    IFNULL(FILTER(Measures.Revenue USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
ELSE
    IFNULL(FILTER(Measures.Revenue USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END *
CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    CASE WHEN IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0) = 0 THEN
      IFNULL(FILTER(Measures.FX_2 USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    ELSE
      IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    END
ELSE
    IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END -
CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    IFNULL(FILTER(Measures.Revenue USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
ELSE
    IFNULL(FILTER(Measures.Revenue USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END*IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Jan' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
(CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    CASE WHEN IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0) = 0 THEN
      IFNULL(FILTER(Measures.FX_2 USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    ELSE
      IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    END
ELSE
    IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END*-1)
,0)
END +
CASE WHEN 3 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,LEFT('@{pv_period}{Jun-2009}',3))) AS INT)
THEN
     0
ELSE
     IFNULL((CASE WHEN 3 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    IFNULL(FILTER(Measures.Revenue USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
ELSE
    IFNULL(FILTER(Measures.Revenue USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END *
CASE WHEN 3 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    CASE WHEN IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0) = 0 THEN
      IFNULL(FILTER(Measures.FX_2 USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    ELSE
      IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    END
ELSE
    IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END -
CASE WHEN 3 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    IFNULL(FILTER(Measures.Revenue USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
ELSE
    IFNULL(FILTER(Measures.Revenue USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END*CASE WHEN 2 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    CASE WHEN IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0) = 0 THEN
      IFNULL(FILTER(Measures.FX_2 USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    ELSE
      IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    END
ELSE
    IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Feb' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END)
(CASE WHEN 3 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,VALUEOF("CURR_MONTH"))) AS INT)
THEN
    CASE WHEN IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0) = 0 THEN
      IFNULL(FILTER(Measures.FX_2 USING Period."Month"=VALUEOF("CURR_MONTH") AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    ELSE
      IFNULL(FILTER(Measures.FX_1 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
    END
ELSE
    IFNULL(FILTER(Measures.FX_2 USING Period."Month"='Mar' AND Period."Year"=VALUEOF("CURR_YEAR")),0)
END*-1)
,0)
END(And so goes until CASE WHEN 12 > CAST(EVALUATE('to_char(%1,''MM'')' as CHAR(2),EVALUATE('to_date(%1,''Month'')' as DATE,LEFT('@{pv_period}{Jun-2009}',3))) AS INT), I can't post whole formula due to maximum character per post)
let's say that above calculation is = <CALCULATION>
In Answer:
Column 1: <CALCULATION>
Column 2: ABS(<CALCULATION>)
Column 3: SUM(ABS(<CALCULATION>))
Column 4: RSUM(ABS(<CALCULATION>)/SUM(ABS(<CALCULATION>)))
This is to achieve Jan through Dec calculations through hardcode for each months.
At first I thought it was because of the limit of characters OBIEE can handle for each request, because when I was pressing OK upon editing column formula in Column 3 (after I've entered Column 1, and Column2), it pops an error (end of input has been reached)
though when I delete formula in Column 1, I can sucessfully entered formula in Column 2, and Column 3; Seems it can only handle 2 <CALCULATION>, so I was thought this is like a bug: limit for SQL Issued before in version 10.1.3.3.
If there is not any setting to control this, and the only solution is to change the approach on query, I'm thinking of using AGO formula to minimize the query.
If I'm not mistaken, Nico, and Joe, the culprit will be the extensive use of FILTER and CASE WHEN so the SQL generated will be too many to handle?
Regards,
Will

The maximum report processing jobs limit configured has been reached -Error

I have Created a common page that has a CrystalReportViewerControl (name of this page is ShowReport.aspx). The report name and database name that required for the report is being passed in a querystring. The database connection info is being pulled from the web.config file. All of the reports that I am dealing with have dynamic parameters and the Crystal Prompt page is automatically being created by the crystal viewer for these. Everything in my application is working fine except that when I try to access any report for the 76th. time I get the following error "The maximum report processing jobs limit configured by your system administrator has been reached."
I have already researched this error and am aware that the PrintJobLimit can be modifed to increase this limit or can be set to -1 if we need to allow unlimited connections. However doing this is not an option due to the degradation of server performance.
The other option that I have tried is to make sure I close and dispose of the report document object on the Page_unload or the page_SavedStateComplete() however on doing so even the session variable that I am using to store the originally created reportdocument is loosing all of the values it requires to display the report. The session variable is still available i.e. it is still of type report document but it has no values for any of the properties like FileName, database etc , basically for all of those properties it show an error "Invalid File Path" when viewed in debug mode.
I have already tried several approaches but with no luck. Every single time I close the originally created ReportDocument object I loose all the required values in the Session
I am using Crystal Report XI R2 , .Net 2.0 and ASP.net
Following is the code: (Any help will be highly appreciated) Thanks:
Option Strict On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports System.Data.SqlClient
Imports System.IO
Partial Class _ShowReport
Inherits System.Web.UI.Page
Private FechReport As ReportDocument
Dim strSelectedDatabase As String
Dim strReportsFolderPath As String =
System.Configuration.ConfigurationManager.AppSettings("ReportsFolderPath").ToString()
Dim strReportFileName As String
Dim strReportFullPath As String
Dim iInsertedLogId As Integer 'This variable is used to store the inserted log id for the executed report.
Dim strConnString As String = System.Configuration.ConfigurationManager.AppSettings("ConnString").ToString()
Dim strServerName As String = System.Configuration.ConfigurationManager.AppSettings("CR_ServerName").ToString()
Dim strUserName As String = System.Configuration.ConfigurationManager.AppSettings("CR_UserName").ToString()
Dim strPassword As String = System.Configuration.ConfigurationManager.AppSettings("CR_Password").ToString()
Protected Sub Page_OnSaveStateComplete(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.SaveStateComplete
If IsPostBack Then
If iInsertedLogId > 0 Then
UpdateReportLog_ReportServedTime(iInsertedLogId)
If Not FechReport Is Nothing Then
FechReport.Close()
End If
End If
End If
End Sub
Sub Page_Unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
If Not FechReport Is Nothing Then
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
End If
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sRptFileName As String
If Request.QueryString("database") "" Then
strSelectedDatabase = Request.QueryString("database")
Else
Response.Write("A Valid Database has not been supplied to this page")
Response.End()
End If
If Request.QueryString("ReportFileName") "" Then
strReportFileName = Request.QueryString("ReportFileName")
strReportFullPath = strReportsFolderPath & strReportFileName
Else
Response.Write("A Valid Report has not been supplied to this page")
Response.End()
End If
sRptFileName = strReportFullPath
If Not IsPostBack Then
FechReport = New ReportDocument
If Not FechReport Is Nothing Then
ShowReport(sRptFileName)
End If
Else
If (Session("oReportDocument") Is Nothing) Then
FechReport = New ReportDocument
ShowReport(sRptFileName)
Else
'FechReport = New ReportDocument
'FechReport = CType(Session("oReportDocument"), ReportDocument)
myCrystalReportViewer.ReportSource = Session("oReportDocument")
'myCrystalReportViewer.ReportSource = FechReport
End If
End If
End Sub
Public Function ShowReport(ByVal strReportFileName As String) As Boolean
Dim blNoErrors As Boolean = True
Dim crDatabase As Database
Dim crTables As Tables
Dim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
FechReport.FileName = strReportFileName
myCrystalReportViewer.ReportSource = FechReport
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = strServerName
.DatabaseName = strSelectedDatabase
.UserID = strUserName
.Password = strPassword
End With
Try
crDatabase = FechReport.Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
Catch ex As Exception
Response.Write(ex.Message & ControlChars.NewLine & ex.InnerException.ToString & ControlChars.NewLine)
Exit Function
End Try
Session("oReportDocument") = FechReport
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
Return blNoErrors
End Function
End Class

I have looked into Caching the report document as well. However, as you mentioned in the post it, it will only be usefull when the DB and the report parameters remain the same which is not the case in our application. We have multiple identical databases and hundreds of reports. Our users have the option of using a combination of any database and any reports, each report having numerous parameters.
Since one user can only access one report at a time. i do have cleanup code that removes the session variable used to store the reportdocument object in the page that is initially used to call the ShowReport.aspx page.
I understand now that the CR.net SDK is only good for light reporting only. Unfortunately when we started development based on all of the articles that I gathered, I didn't anticipate running to issues like this. But I guess that's the nature of the business :-). And hence there are people like you who go out of the way to answer these difficult questions.
Regards,

Recording stopped mas duration for the file has been reached

Has anyone else seen this message, "Recording stopped because the maximum duration for the file has been reached" this is happening on 10.6.2 server and client all updates applied. The File from podcast capture is not saved, it just disappears We are using a Hitachi camera. Any ideas?

This problem has been reported before, here: http://discussions.apple.com/thread.jspa?threadID=1704655 . For some reason, that thread was marked as "answered", even though it doesn't seem to have actually been answered.
I've just experienced the problem myself. I'm using OS X 10.6.3 with QuickTime Player 10.0 (113), capturing audio and video over FireWire from a PAL VHS deck via a Canopus ADVC-55. I'm using the "High" setting to record in QuickTime Player.
Sometimes I'm able to capture indefinitely long amounts of video; sometimes, though, I get a "Recording stopped because the maximum duration for the file has been reached" error after capturing only a few seconds. This variability occurs not only between VHS tapes; it also can occur when using the same source VHS tape (the same parts of the tape, even!) repeatedly.
Apple, this appears to be a QuickTime bug. Please investigate and fix it!

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

BR Backup termination -The physical end of the tape has been reached.

Hello
We have taking the BR Offline backup on weekly basis, Now we are facing the below issue
Our Production Database size was 1500GB , we have compressing to take the backup in HP LT03 800GB Media
But Error through as per the below
dd: unable to initialize ASPI manager
dd: using NT tape support
dd: The physical end of the tape has been reached.
dd: write error: The physical end of the tape has been reached.
13573+0 records in
13572+0 records out
1 write error
dd: The physical end of the tape has been reached.
If it is possible to add additional media for this backup- Please help me to solve this issue
Regards
M.Karthik
+91 99401 87552

I ended up returning the camera and got 2 XL1's for cheap. HD is just not ready for us yet. Reproduction costs are to much (HD DVD, or BlueRay). Maybe in a few years when the HD media battle is over.
The guy at the camera store said one of the issues maybe our version of FCE but I was sure we had the latest and greatest 3.5.1. He said we should record over the whole tape (blank) then reuse it to get the time codes right with FCE.
MacBook 2GHz 2GB, Mac Pro Quad 3GHz 6GB Mac OS X (10.4.9)

Can not do Surrogate bidding after Bid invitaion End date has been reached

We are on SRM 5 server 5.5
We are using surrogate bidding to capture bid responses and we manually receive vendors responses by the End date on the Bid invitation . We are unable to do surrogate bidding after the End date has been reached hence we then change the End date to a later date so that we can do surrogate bidding.
Is there a way that this can be done without changing the bid inviation end date ?
Regards

SAP standard you can not do Surrogare Bidding after the submission date
We are going to use Follow On documents

Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMAZON: The maximum number of addresses has been reached.

Hi All,
I was trying to create Instance for SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] in SAP HANA Enterprise Cloud / Cloud Appliance Library when I got this message 'Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMASON: The maximum number of addresses has been reached'.
I tried looking for an answer or solution for this issue but no success.
Can anyone please help me with this?
Regards,
Deep Tanwar

Hi Deep,
you need to check your Elastic IP limits within the AWS console and how to release them if they are used:
Elastic IP Addresses (EIP) - Amazon Elastic Compute Cloud
AWS Service Limits - Amazon Web Services
Regards,
Hannes

When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

Hello community
    Using Sharepoint 2010 Server and the UI on its intranet there is a My Site. After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile. But when I logon as
a user
when I try to create the My site I get an error stating" "There has been an error creating the personal site. Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
and User cannot be found. So I check the UPS Synchronization and I can find the username in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site. The funny
thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
question is how come the account that created the intranet can create
My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says: "There has been an error creating the personal site. Contact
your site administrator for more information". (Note: The output from Event Viewer is posted below)?
    Thank you
    Shabeaut
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Portal Server
Date:          7/24/2014 4:51:42 PM
Event ID:      5187
Task Category: Administration
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      <ServerName>.<FullQualifiedDomainName>
Description:
My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
    <EventID>5187</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
    <EventRecordID>33776</EventRecordID>
    <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
    <Execution ProcessID="9600" ThreadID="9520" />
    <Channel>Application</Channel>
    <Computer><ServerName>.<FullQualifiedDomainName></Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0"><DomainName>\<UserName></Data>
    <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
    <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
</EventData>
</Event>

Make sure you enable self service site creation on the MySite web application via CA
http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
You mentioned trusts and people picker. I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
searchadforest setting to make sure SP can reach to trusted domains to find users.
"When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
setapppassword operation, and then run the peoplepicker-searchadforests
property."
http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Problem happening again. The maximum report processing jobs limit configured by your system administrator has been reached.

We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
   at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
    Private ReadOnly Property ReportId() As Integer
        Get
            Return Integer.Parse(Me.Request.QueryString("r"))
        End Get
    End Property
    Private Property CacheKey() As String
        Get
            Dim sCacheKey As String = Me.Request.QueryString("ck")
            If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
                sCacheKey = CStr(Me.ViewState("CacheKey"))
            End If
            Return sCacheKey
        End Get
        Set(ByVal Value As String)
            Me.ViewState("CacheKey") = Value
        End Set
    End Property
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        If Not Me.IsPostBack Then
            LoadReport()
        End If
    End Sub
    Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
        'Redirect to the PDF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
        'Redirect to the RTF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
        'Redirect to the Excel Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
        LoadReport()
    End Sub
    Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
        LoadReport()
    End Sub
    Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
        LoadReport()
    End Sub
    Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
        LoadReport()
    End Sub
    Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
        LoadReport()
    End Sub
    Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
        LoadReport(True)
    End Sub
    Private Sub LoadReport()
        LoadReport(False)
    End Sub
    Private Sub LoadReport(ByVal bRefresh As Boolean)
        If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
            Common.Settings.OverrideCompany = TypedSession.OverrideCompany
        End If
        'Get the report data
        Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
        'If there is data to display bind it to the Crystal Viewer
        If dtReport.Rows.Count > 0 Then
            With m_oReportDocument
                .Load(ReportHelper.GetReportPath(Me.ReportId))
                .SetDataSource(dtReport)
                .PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
            End With
            crvMain.ReportSource = m_oReportDocument
        Else
            'Hide the controls and display a message if there is no data
            crvMain.Visible = False
            btnPDF.Visible = False
            btnExcel.Visible = False
            lblNoResults.Visible = True
        End If
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        m_oReportDocument.Close()
        m_oReportDocument.Dispose()
    End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
Thanks

I suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

A breakpoint has been reached (0x80000003) occurred in the application at location 0x07c79240

Hi everyone,
I got an error when I was clicking around in my program.
The following error message came up:
The exception breakpoint
A breakpoint has been reached
(0x80000003) occurred in the application at location 0x07c79240
I don't know but is it possible that it has something to do with an other program that is running on the PC?
It would be nice if someone got a solution or can help me a little bit further.
Hope to hear from you soon.
Regards,
Kenny

Hi Kenny,
I couldn't find much information regarding this problem. An external search delivered results of different programs bumping into this very same Windows error message. A clean installation (in most cases) was delivering a solution. But first of all;
- how often does this problem appear? Does it appear in Labview in general or in a specific exe / VI?
- which operating system are you using?
- which Labview version are you using?
If it is in a specific VI / exe we can try to strip it down. Does the application use any drivers (DAQmx etc)?
Best regards,
Martijn S
Applications Engineer
NI Netherlands

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

End of Stream has been reached error CS4

Similar Messages

Maybe you are looking for